Tracking the changes made to an infoobject

Hi all,
I would like to know how to find out all the changes that were made to an infoobject, when and by whom it was made.
how do we find this out ?
Regards
Venkat

Hi,
Thanks for the input.
I checked the version comparision -- > Display all Properties, but this only has the info like last changed by, Changed on, and Changed at.
what I am looking for is all the changes that were made to the infoobject, who has made the change, on which date and what is the change.
Is there any way we could get this data ??
Any help on this would be highly appreciated and rewarded as well.
Regards
Venkata

Similar Messages

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

Tracking the changes made to the custom table field value

Hi all,
can we track the changes made to the custom table field values. if yes..plz specify how it can be done.
Example: if i changed the value of field 'NAME' of table 'YYHCUSTOMER'. i would like to know the old value and the new value of the field. For this, I set the flag 'LOG DATA CHANGES' in the technical settings of the table 'YYHCUSTOMER'.

-> try TA: SCU3
regards Andreas

Tracking of changes made in CJ40/CJ42

Hello PS Gurus,
As there is no standard report available to track/monitor the changes done in CJ40/CJ42 for a perticular CO Version, Can anybody help me on how to track the changes made for the cost/revenue planning in cj40/cj42 ?
Appreciated for your quick response...
Br
Hari

Hi Virender,
Thanks for your help. This helped me to achieve the exact requirement.
CJI4 is only to track the changes made while using detailed cost planning but in our case this doesn't helps me.
As we are using structural cost planning, CJID report helps to track the changes made in CJ40 w.r.t structural cost planning yearly and overall level.
Nitin and ahmed --> Thanks for your involvement.
Br
Hari Krishna K
Edited by: Hari Krishna Kudaravalli on Mar 26, 2010 6:06 PM
Edited by: Hari Krishna Kudaravalli on Mar 26, 2010 6:08 PM

Help:: Tracking the change history for a BP

Hi All..
I really need ur help.. Somebody please..
I'm making a prog. to update BP (TCODE: BP) & it run well. But now, i'm getting to make report for change history in BP. As for it, i look up it in table CDHDR & CDPOS, but i didn't find it :(.
I use these FM to update:
1. BUP_BUPA_UPDATE.
2. ADDR_SAVE_INTERN.
Even i have tried to run FM ADRESSE_WRITE_DOCUMENT, but it still didn't work well.
The questions are:
1. Am i right for using FM ADRESSE_WRITE_DOCUMENT in order to get the history change in CDHDR & CDPOS.
2. How to use FM ADRESSE_WRITE_DOCUMENT? What should i fill up in parameter: OBJECTID,PLANNED_CHANGE_NUMBER,PLANNED_OR_REAL_CHANGES,
and NO_CHANGE_POINTERS ???
3. Why do always i got the exception NO_POSITION_INSERTED in using FM ADRESSE_WRITE_DOCUMENT? How to solve it?
4. Or are there any ways how to update well where i'm able to track the change history for BP? / Is that any functions to update BP like FM CRM_ORDER_MAINTAIN.
Thx so much.. for ur attention
Ur guidance is so much needed.
Best Regards
Daniel N.

Hi Daniel,
You can refer to table TCDOB for object class, it has a list of object class to which you can refer to and also the text description for each object class exists in that table.
Regarding the object id, you need not pass the value of the object id unless and until you want to read the change history of a particular Business partner.
Pass the value of the object class and if required the date of change to track the changes made to the BP's in that particular time period.
Hope this helps.
Regards,
Karthik.

Track the changes to the Purchasing groups

Hi Experts,
Can we track the changes made to the Purchasing groups? Or when we are making the changes the history will be lost?
Thanks in advance,
Regards
Anamika

Hi,
Go to -.> OLME -> Create Purchasing group -> MENU -> Utilities -> Change Logs
Enter Analysis period i.e Start Date, time to end date, time
And execute
You will get the change log
you can also use t code SCU3
Push Evalute logs.
Input 'T024' in Customizing Object/Table
Enter Analysis period i.e Start Date, time to end date, time
select tables in Evaluation for
Execute
Edited by: redriver on Dec 8, 2011 4:46 PM

Tracking the changes in Scheduling agreement delivery schedule

With Scheduling agreements, when goods receipt is done at receiving, system will validate against the Scheduled qty and delivery dates. If there is excess qty received, they need to either change the qty or the date to receive the same.
Now current process at one customer is the vendor evaluation is done based on his ability to send exact required qty on precise date. So if the required qty is shipped / received on the scheduled date, vendor gets 1 point, if not vendor gets zero points. So both qty & date have to be correct for vendor to get 1 point, if either is wrong he gets a zero point.
Now in our SA scenario, we are saying that in case goods are received in excess or if goods are received a day earlier, in order to perform the goods receipt, change the qty/date in SA. If this qty/date is changed to receive the goods, how can we later go into system and see whether supplier shipped as per expected qty & date?
My understanding is we can keep track of date change, by using Statistical date in delivery schedule, but how can we keep track of qty change ?
Thanks
Dinesh

Hi dinesh
I dont know exactly this helps you or not but pl try this to track the changes of your SA.
1.Go in ME2m.
2.Enter material,plant,po.
3.In scope of list enter "RAHM"
4.Then press "Choose" tab
5.Only select SA.
6.Execute.
7.Select SA and press"changes":
I think this will show you all changes made for your SA.
regards
ravi

Undoing the changes made to DSO

Hi
One of our developers had modified one DSO and its transformation etc long time back and since the change was put on hold did not transport it to Quality or Prod. Now we have to make other changes and transport these. Is there any way to identify the changes made before, other than manually comparing with Prod and removing one by one.
Is there any table which has change version or some other info.
Please let us know.
Thanks In Advance
Aparna

Hi Aparna,
Not sure about transformations, but you can get for the DSOs by a roundabout technique. In your DEV box, go into SE11 and open up the active data table of the DSO.
Then, follow the menu path Utilities --> Versions --> Version Management. A new screen will open up, and at the top there will be a button called Remote Comparison. Click it, and then enter your production system's ID in the Target Sys field.
It will then show you a list of differences between the production and the development DSOs. This should avoid the manual comparison bit for all the InfoObjects, though you'll still have to check manually for stuff like Nav Attribs, DSO properties etc.
Regards,
Suhas

Tracking the changes to a Info-object or info-cube.

Hi Gurus,
I want to track a Info-object changes.Put it this way.
When the info-object is been created the length is 10 chars,But then its changed to 20 and then 40 .i don't these changes are until somebody told me.how do i track the changes to length or any other properties of the info-object ?
What about info-cube?Is there any way to track the changes done with respect to time on a info-cube?

hi Nrupal,
if the log not deleted, you can try
RSD1 - your infoobject - click icon 'logs' (blue !),
choose 'activating in dictionary', try as well saving/activating, give date range
for mass check last change, can use table RSDIOBJ
for infocube try RSDCUBE, logs, choose 'mass activator', try also 'save/activate'
to display last change, infocube right click 'display',
menu extras - info - content/change
or SE16 table RSDCUBE
the log can be accessed in infoobject or infocube maintainance also,
or try SLG1
hope this helps.

Tracking records change made by another user or session

How does oracle forms track records change made by other user or session?

I think the question is, how does Forms know to issue the error "FRM-40654: Record changed by another user. Re-query to see change".
I don't know exactly how Forms knows this. But in the past I have found that if a column has changed on the record, which you are not querying in this forms block, then you don't get the error. So Forms is perhaps comparing all the database values for the queried record, against the values that Forms has queried?
When you attempt to lock the record from Forms, you'll see that Forms issues a statement
SELECT <all the db columns in the block>
FROM <wherever>
FOR UPDATE OF <all the db columns in the block which are not query only>
Even so, in the database, that statement doesn't know what the values are that the Form has already queried. So Forms must be doing something else.
Hope this helps, it's a bit of a black box area I guess.

Config reqd to track the changes to Bak details with report S_AHR_61015505

Hi All
I have a need to tack the changes to 'Bank Details'. I have tried using the report 'S_AHR_61015505' , it works fine for the 'Addresses' info type but not for Bank details. I presume I need to do some config to activate the change log to track the changes to Bank info using this report.
Can any body please tell me what I exactly I need to do for this .
Thanks
Srinivas

as suresh said follow the steps in img then click on Field group definition. There in infotype 9(Bank Details ) check for Field group is 01 and maintain Fields
Field Group   Field Name
01                 BANKL
01                 BANKN
01                 BANKS
01                 BKONT
01                 EMFSL
01                 ZLSCH.
I hope this answers your question
if so close the thread
---Bob Radi

How to track the changes at report level

Dear Team ,
Could you please help on below scenario.
1.Is there any way to track the changes for each report wise ? Does it possible using the audit database?
2. how to get list for report names by each folder wise( public folders) ?
Thanks & Regards
Venkat

Hi Venkat,
1.In Webi we have a option called Track click that option to enable you to track the changes in your report and also in Tracking option you can change the color as you preferred.
2.Once report is ready to export click (Ctrl+E) and click Public folder then select New folder option available in right corner and create new Folder and export your report.
Thanks
Vignesh R

Report for the changes made in Purchase Order

Hi Friends,
In my location, changes are made to the purchase orders as and when required. Is there any report which shows the changes made to the Purchase Orders?? I am aware of the Item changes option in the Purchase Order.
Thanks in advance..
Regards,
Phani

Hi,
You have to develope an own ABAP report for this, based on the change tables CDHDR and CDPOS
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
Check the link
Purchase order change log
Regards
KK
Edited by: Kishore Kumar Galla on Apr 5, 2010 1:16 PM

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

Error message when I insert a div tag: Couldn't commit the changes made in Live View. Refresh the Live View and try editing again.

According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
DIALOG BOX:
While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
This appears at the top of the screen:
Couldn't commit the changes made in Live View. Refresh the Live View and try editing again. [Refresh doesn't do anything.]

Try the suggestions here -
Index to Dreamweaver FAQ
The solution for Javascript errors is likely the one.

Tracking the changes made to an infoobject

Similar Messages

Maybe you are looking for