Tracking user IP addresses?

Does Tarantella log which IP address a given user logs in from? I noticed
in the Object Manager that you can see what IP address a current user is
logged in from. Is it possible to track that information through Billing
Services?
Thank you,
Steve

Yes, I need to track all user logons and where those users logon from. I'm
not as interested in what emulator sessions they run but that information
is welcome.
Escape 27 wrote:
Steve,
You could probably try adding "*/*/*:all_%%PID%%.log" to your log filters to
see if you can find the necessary info in the log file. If you do, you can
then modify the filter log only those specific components. I'm sure the
client IP address is being logged in one of these components, but can't
remember which one though.
BTW - what are you trying to achieve by tracking the user IP address?
"Steve T" <[email protected]> wrote in message
news:cnjd1u$n87$[email protected]..
Thank you for your response. After considering it, I believe that it would
cause a problem: issuing the TTA emulatorsession command consumes high CPU
resources. To track the majority of the user sessions would require
running this command every minute in cron. This would not be good for
performance. Even if it was run every 5 minutes, it would still impact
performance on an already busy TTA server.
Also, we would miss any quick sessions that may have started and ended
after the previous emulatorsession poll took place. (The TTA
emulatorsession command will only display currently active sessions.)
I was hoping that there would be a log filter that could be configured to
modify what Billing Services keeps track of.
Regards,
Steve
Tillmann Basien wrote:
if you use "tarantella emulatorsession list" you can see the IP Adress of
the Users Client WS.
Writing an cron based script, and analyse the output.
TAB
"Steve T" <[email protected]> schrieb im Newsbeitrag
news:cniutc$inn$[email protected]..
Does Tarantella log which IP address a given user logs in from? I
noticed
in the Object Manager that you can see what IP address a current user
is
logged in from. Is it possible to track that information through
Billing
Services?
Thank you,
Steve

Similar Messages

Does Oracle Track User

Hi,
I'm just wondering whether Oracle does keep track of the user which had logged into the database.
Meaning having a text files or tables which have information of the username, log and logout time, etc.
This might be needed to increase the security of the database.
Thanks.

You can view logon times for users from the listener.log file here's what a logon looks like in that file:
12-JUN-2002 08:44:42 * (CONNECT_DATA=(SID=oraprod)(CID=(PROGRAM=D:\oracle817cli\bin\SQLPLUSW.EXE)(HOST=xxxxx)(USER=aglick))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=1551)) * establish * oraprod * 0
You can also tell where a users connecting from and what program they're using. Note that the x's will have actual values there - I don't care to give out my IP address and other information.
If you need more information than logon times you'll have to do what Andrew suggested.

SAP user company address

I just created a new client and logged onto it with the SAP* user so that I can create an administration user for setting up CUA.
It's a brand new client so I have to define the SAP user company address, but when I click on the drop down arrow for the country key, it says no values found. Is this characteristic of new clients? How can I get the address defined? Thanks!

Hi Vu!
I think, now I can track your problem.
Please check in SCC4, which setting client 000 has in field T000-CCCATEGORY (or directly with SE16).
Default (and correct) value is SAP Reference. If it's different in your system - deep ****. You should change this value back to SAP Reference (that's easy).
But whoever made this change, used this client for further changes - bad idea. Let's just hope, there is no mess.
There is no need to mark on client as productive - especially development and tests systems don't have this, only in production systems this setting makes sense.
Afterwards your problem should be gone - let's see.
Regards,
Christian

Tutorial - how to track user progress in a Captivate movie

I wanted to start working with the new scripting capabilities
in Captivate 4 and thought a good first project would be to create
a set of variables and custom actions and execute the actions based
on the state of the variables. I wrote up a description/walkthrough
with screenshots and the source .cp is downloadable here:
http://elearninglive.com/wordpress/2009/01/tracking-user-progress-in-captivate-4-using-var iables-and-actions/
Hopefully it proves useful to others!
A couple of things I mention at the bottom of the post in
regards to the new features in CP4:
1. The actions window is amazingly slow once you add more
than a handful of actions. Perhaps it's just my machine? I have a
very fast machine with lots of ram, but perhaps it's something
unique to my environment?
2. You can't 'chain' actions. In other words, you cannot use
'execute multiple actions' setting to execute user-created actions,
just the built-in ones, which seems to me a pretty big limitation.
I had to work around it.
3. As an add-on to #1 above - there is no way to
import/export code. Since the actions window is so slow it would be
ideal if we could just import code written in a text file, or
better yet, have a simple code editor (like the actions panel in
Flash).
My 2 cents, fwtw, as a new CP4 user....
mark
www.elearninglive.com

> But I didn't really know what AuthorWare was actually
> capable of producing until this past year when I
happened to subscribe to
> the
> AWARE list (AuthorWare Developers) and over time read
about the
> capabilities it
> had. It was an excellent tool - and it seems, the best
there ever was for
> our
> needs, and it amazes me that there isn't anything to
replace it yet that
> matches it. Of course, the problem was the shockwave
plugin. Which is a
> big
> problem and the real original reason I never looked into
it in the first
> place.
The biggest problem Authorware had was poor marketing. Second
was it had no
way to natively create the eye-candy that Flash was wowing
the world with.
Third, there was no attempt by Macromedia modernise
Authorware with a lot of
very basic things that would have made a huge difference to
everyone's
perception of the tool
Fourth, Marketing kept telling people Authorware was dead,
from about
Authorware 5. I think the Flash team was on a bonus for
converting people
>
> I don't understand why Adobe is now making Captivate the
next AuthorWare.
> That's basically what they're doing it seems. It's like
saving up to buy a
> ferrari when you have on sitting unused in your garage!
They already had a
> great elearning development tool in AuthorWare and just
needed the one big
> piece: output to flash swf and not shockwave. I guess
there were technical
> reasons why that wasn't done?
I think it is clear to those of us that have had to move to
Captivate from
Authorware that Captivate is *very* lacking in specific
advanced features
and functionality that old hands are used to. As with any
product, users are
bombarding adobe with requests that boost the power and scope
of Captivate.
It's a natural progression.
>
> As much as I like Captivate 4, it's a few major releases
away from coming
> close to what we *really* need.
I agree - but it is a lot closer this time around :-)
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu

System_Mail_Send - Get user email address

Hi,
I am trying to use System_Mail_Send to send a notification in the end of a Job Chain.
How I can retrieve user email address from SAP CPS user(UME)?
I want to use this information as To destination.
Regards,
André Ferreira

Hi Andre,
Actually, I had no time to test what I wrote earlier ... the code below should work in a library source:
// Example code to illustrate
package masalan;
import com.redwood.scheduler.api.model.SchedulerSession;
import com.redwood.scheduler.api.model.Subject;
import com.redwood.scheduler.api.model.enumeration.SubjectType;
import com.redwood.scheduler.api.scripting.variables.*;
public class user
public static String getEmailAddress(String username)
     //Default email address is [email protected]
      String defaultEmail = "[email protected]";
      if (username == null || username.trim().isEmpty()) return defaultEmail;
      SchedulerSession jcsSession = ScriptSessionFactory.getSession();
      Subject subject = jcsSession.getSubjectByTypeName(SubjectType.User, username);
      String email = "";
      if (subject != null) email = subject.getEmail();
      if (email != null && email.endsWith("@company.com")) return email;
      return defaultEmail;
You create REL entry points:
Name - getEmail
FQ Class Name - masalan.user
Method Signature - getEmailAddress(String)
Now, create a parameter Username on the job chain.
Parameter To should have the value =Custom.getEmail(chainParameters.Username)
You specify the username in the Username parameter, the email address will be retrieved from CPS. The user must have logged on to CPS at least once, alternatively, you can import the user.
Note that to import the user, you must assign at the very least the AccessScheduler action in UME.
Regards,
HP
Message was edited by: h. Carpenter - missed an import and add SchedulerSession
Message was edited by: h. Carpenter - Improved error handling, more secure code (it uses default email address if anything goes wrong or if somebody tries to use an external email address)

Tracking user actions inside Compliance Calibrator

Good day everyone
I am currently working on a CC5.2 implementation and I was wondering if there was any way to track user activities, to be more precise:
1- who created mitigation control X
2- who mitigated risk X for user Y
etc...
Im working on an implementation for a client that already had custom ABAP SOD tools that would output reports assigned to different reviewers, each action was tracked through the process and reviewers/approvers had to signoff along the process so people were accountable..
So far, the only way I found to trace who did what was by the way roles/authorisations will be separated between the Netweaver users, since I'm new to this platform maybe I am missing something.
Any help is appreciated, thank you
Jay

Dear Jay,
Check the entries in these tables:
/VIRSA/DTCWKFLOW               Mitigation Work flow Table
/VIRSA/MITREPORT               Mitigating Reports
/VIRSA/MITWKFLOW               Mitigation Work flow Table
/VIRSA/ZMITAPVR                Mitigating Control Monitors
/VIRSA/ZMITCNTL                Mitigating Control - Users
/VIRSA/ZMITHROBJ               Mitigating Control - HR Object
/VIRSA/ZMITMON                 Mitigating Monitors and Approvers
/VIRSA/ZMITPROF                Mitigating Control - Profile
/VIRSA/ZMITREF                 Mitigating Controls
/VIRSA/ZMITREFT                Mitigating Controls Text
/VIRSA/ZMITROLE                Mitigating Control - Role
/VIRSA/ZSODMIT                 SOD Group Id and Mitigating Reference Numb
Regards,
Naveen.

Track user changes in customized transparent table

Greetings..
How do i to track user changes in my table ? is there any master table that keep track changes made by user on the specific field.? Is there possible if the table have the original and changed data.

i got the below explanation from other thread, which has explained by an expert, so, take it as reference and interprete according to ur req.
BEGIN
Table Events:
Go to SE11 and open your Ztable
click on the Table maintenance generator.
you can find the function group. right
Take the Function group name and go to Tcode SE37
and open the Function Group.
In the Status of the small window of the Function
group display
you can find out change requests , Main program and
Function group Docu tabs.
Click on Main program and create user defined Include.
check the sample code below
Click on main program
Create user defined include
User-defined Include-files (if necessary). *
INCLUDE LZPHIRF... " Subprograms
INCLUDE LZPHIRO... " PBO-Modules
INCLUDE LZPHIRI... " PAI-Modules
Create the below include.
INCLUDE LZPHIRI01. " PAI-Modules
Double click on the Include name. you have the below
code
Loop at Extract.
module liste_init_workarea.
chain.
field fild1
field fild2
field fild n
module set_update_flag on chain_request.
You have to add a new module here
check the below code
*----User defind module
Module user_defind_validation.
endchain.
Double click on module write code in that.
Include <Include Name> *
*& Module user_defind_validation
Module user_defind_validation.
Here you can write your own validations.
field2 = field1 /2.
field4 = field1 /4.
if field4 field3.
message.
endif.
EndModule. "user_defind_validation
Events allow you to change the generated table
maintenance dialog at predefined positions, which
cannot be reached by user modules in the screen flow
logic.
The user routines are called dynamically at runtime.
For this reason, the routines must be in a user include
in the table/view maintenance dialog function group.
All extended table maintenance global data is available.
An interface is only required for events 22 and AF.
The events can be additions or replacements.
Additional events
Event 01 before saving the data in the database
This event occurs before new, changed or deleted
entries are written to the database
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the
lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
END
thanq

I would like to change my user email address to a different email? I am currently subscribed with [delete] but would like to change it to [delete]

I would like to change my user email address to a different email?
I am currently subscribed with [email protected] but would like to change it to [email protected]

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-email address https://forums.adobe.com/thread/1446019

User IP Address in ADC (Activity Data Collector)

Hi all,
I would like to use Activity Data Collector. First previews of the generated logs looks fine but I miss the logged User IP Address.
Does someone know how to get the IP Address?
Maybe I missed a parameter, so please tell me which parameter logs the User IP Address (NOT the server).
ADC file format / parameter: http://help.sap.com/saphelp_nw70/helpdata/en/46/e4de7fdc8e72dde10000000a114a6b/frameset.htm
Thanks and regards,
Stefan

Hi,
chk this also
[http://help.sap.com/saphelp_nw04s/helpdata/en/7f/c52442ad9f5133e10000000a155106/content.htm]
[http://help.sap.com/saphelp_nw04s/helpdata/en/0b/50ad3e1d1edc61e10000000a114084/content.htm]
Regards
Baby

Hidden iPhone File Tracks Users' Every Move

The security of Apple's iPhones and iPads is being called into question after it emerged the devices contain a hidden file that tracks the owner's locations.
full story - http://uk.news.yahoo.com/5/20110421/twl-hidden-iphone-file-tracks-users-ever-3fd0ae9.html
-+-No longer a forum member-+-

Associated problem.
Switch your mobile off when not in use!
http://www.guardian.co.uk/technology/2011/apr/25/wifi-security-flaw-smartphones-risk
Quote:
"The safest route for existing users of mobile phones, particularly if they use BT Fon or Openzone, is to switch off their Wi-Fi when they leave home and only use it on systems they know to be secure – such as at home or at work. Everywhere else you use Wi-Fi – whether in a coffee shop, an airport, a railway station and especially out in the street – you are taking a calculated risk."
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Tracking User Access to Help

Is there a way to track user access to HTML help? I'm wanting to be able to run a report that will tell me how often the online help is accessed either at topic level or just the full help level if that is the only possibility. Is there a plugin or third party app that can do this?
For my Webhelp apps, I am able to tag individual html files with Omniture tags, however I can't do this for a compiled .chm file. The issue with the Omniture tags is that everytime I recompile help, I have to reinsert the tags.
I am using Robohelp 8, HTML Help and Web Help
Thanks in Advance,
Diana Weber

Hi Diana.
With the web output you could try using something like Google Analytics or even invest in the RoboHelp Server application. However neither of these will work with HTML Help. The problem with HTML Help may not be the feasibility of recording hits on a file but pricacy concerns by the user. The Windows System Monitor records file hits but you'd have to manage a way of homing in on the data on each end user's PC!
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Anyone use sccm to track user's HP docking station serial number and model?

i am only able to see whether the laptop is dock or not by registry key so far.
HKLM\System\CurrentControlSet\Control\IDConfigDB\CurrentDockInfo
anyone manage or use sccm to track user's HP docking station serial number and model before?
thanks
This topic first appeared in the Spiceworks Community

The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
In the picture observe the component in left hand bottom corner.
http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
I would say, take the adaptor to store and get one.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Tracking User Activity with Standard Web Logs and Tools Like WebTrends

We are running EP 6 SP14 on UNIX and I'm looking to track user activity. Not just how many people have logged in, but who is accessing what documents in KM. For example, what documents are the most popular and how much use the system is getting.
I was hoping that EP 6 (Unix platform) ran off us some standard web engine (like Apache) and we could just turn web logs on, but from the lack of discussion on SDN, I'm not encouraged.
All I've seen is unofficial link to a Portal Activity Report, which would get us part of the way, but is not full web reporting.
Portal Activity Report:
https://www.sdn.sap.com/irj/sdn?id=/library/uuid/0101b690-0201-0010-6584-a02730ad5edd
Does anyone have any insight on this?

HI llise
Did you get any answers? We are in the same quandry as the exisitng tracking reports are not sufficient for our needs as our users are used to using more sophisticated tools like livestat.

OIM 11g: How to remove rule requiring unique user email addresses

Use the OIM 11g Administrative and User Console to update a user's email address to be the same as another user's address and on save you get error message:
"The user with the attribute Email and value [email protected] already exists"
In OIM 9.1 we used to be allowed duplicate email addresses.
OIM 11g wants them to be unique (refer OIM 11g User Guide table 11-2 in section "11.2 User Entity Definition" which shows the email attribute properties with unique:yes).
How do you change this to "unique:no"?
The OIM 11g Admin Guide section "14 Configuring User Attributes" describes the User.xml file in MDS but doesn't mention unique properties.
The System Properties accessed via System Management->System Configuration doesn't show anything that looks like an option to enforce email address uniqueness.
Thanks

OIM 11g does not allow duplicate email addresses. We asked Oracle about this and they responded that the feature (duplicate email addresses) was "removed from OIM 11g due to sending mail notifications, security and other related
concerns". We think we can live with this restriction and did not make an enhancement request.
The user guide does show that email address is unique:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14316/usr_mangmnt.htm#BGBDCDCH
but there's no way to override the rule.

Tracking user in logs

Gurus,
I have this question about tracking users.
Since there are so many log files in hyperion, I was just wondering if someone can help me with this.
What log file would I view to see what user has retrieved a financial report at a specific time in workspace.
We have been having this problem of the print services crashing a lot which is why I am curious to know which user is trying to pull a report or calculation when the reports crash.
For example,
user A retrieves a financial report in workspace, what log would tell me the user A trying to pull the report.
Also if user A is doing a calculation, what log would i view that would tell me the user has run a calculation and the name of calculation.
Thanks

I don't see the USAGE table getting populated with FR report usage in 11.1.2.2. However I've these in the FRLogging.log (MIDDLEWARE_HOME/user_projects/domains/domain name/servers/managed server name/logs
FRLogging.log)
This entire record is for one report open.
Starts with retrieveObject
[2013-05-22T17:25:14.582-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JvE8R343n3wb0DMaMF1HbIaJ00005W,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: logTimeEnd] PERF: 0000000016 ReportStoreManagerImpl retrieveObject(/My Reports/Sample Basic, 2) This one shows which user opened the report.
[2013-05-22T17:25:16.455-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JvE8RW_3n3wb0DMaMF1HbIaJ00005c,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: startJob] ----------------------------------------------------------
[2013-05-22T17:25:16.455-04:00] [EPMServer0] [NOTIFICATION] [00069] [oracle.EPMFR.performance] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JvE8RW_3n3wb0DMaMF1HbIaJ00005c,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: startJob] START: JobId: 3; User: admin; Name: /My Reports/Sample Basic
[2013-05-22T17:25:16.456-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JvE8RW_3n3wb0DMaMF1HbIaJ00005c,0] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: startJob] ----------------------------------------------------------This one shows the database connection details
[2013-05-22T17:25:16.514-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: Thread-89] [userId: <anonymous>] [ecid: 0000JvDuacI3n3wb0DMaMF1HbIaJ000000,1:24578] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: endJobSummary] REPORT: [Start:052213 17:25:16.478-0400][End:052213 17:25:16.514-0400][Elapsed:0.036][Host:USPITCKATTOOKA2][JobId:3][User:admin][Name:/My Reports/Sample Basic][InBook:false][UserPOV:{ dsname=Sample Basic server=USPITCKATTOOKA2 app=Sample db=Basic type=Essbase metadata={Measures=Measures,Market=Market,Scenario=Scenario}}]This one is the dataquery
[2013-05-22T17:25:16.544-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.performance] [tid: Thread-89] [userId: <anonymous>] [ecid: 0000JvDuacI3n3wb0DMaMF1HbIaJ000000,1:24578] [SRC_CLASS: com.hyperion.reporting.util.HRLogTimer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: logTimeEnd] PERF: 000003: 0000000011 DataQuery createAdmQuery
[2013-05-22T17:25:16.544-04:00] [EPMServer0] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: Thread-89] [userId: <anonymous>] [ecid: 0000JvDuacI3n3wb0DMaMF1HbIaJ000000,1:24578] [SRC_CLASS: com.hyperion.reporting.haradm.EssbaseMDXDataQuery] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: execute] SELECT[[
{[Year]}
DIMENSION PROPERTIES [Year].[MEMBER_ALIAS] , [Year].[MEMBER_UNIQUE_NAME]
ON COLUMNS ,
Hierarchize({ [Product].Children, [Product] }, POST)
DIMENSION PROPERTIES [Product].[MEMBER_ALIAS] , [Product].[MEMBER_UNIQUE_NAME]
ON ROWS
FROM [Sample].[Basic]
WHERE ([Measures], [Market], [Scenario])
]]You can see the time when the user clicked on the report, what query was used in the report, any conditional formatting applied and,...... (all information about that report.
Regards
Celvin
http://www.orahyplabs.com

Tracking user IP addresses?

Similar Messages

Maybe you are looking for