Trading industry
hi mm gurus,
if any one have an experience of implementing sap in trading industry (buy from the vender and without stocking it sell it to the customer international).please send me the configuration document and share the different process involved typically for this particular industry.
regards,
atanu
hi,
1. use third party orders.
( vendor delivering the goods to a customer of a customer).
The parts requuired by your customer, are not manufactured by your organixation, these procurement is done by your vendor. this is purely trading business.
Third party orders are also called as Direct shipment or Drop shipment,
follow the link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/5602ae545a11d1a7020000e829fd11/frameset.htm
hope this may help you,
regards,
srinivas
Similar Messages
-
Daily Stock Report for a trading industry
Hi,
I want a daily stock report for a trading industry. In this i want date wise opening stock, closing stock, outward quantity and inward quantity. How to get it?
Thanks,
NiranjanHi,
This is not easy as you think you have to develop this report by using SQL Query / Crystal report...
Regards
Chidambaram -
hi. I just need any documentation of SD for trading industry.
or any common configuration for trading industry?
please help. thanks.Hello Anwar,
Please dont post general question in the forum.
First take the Business Requirements from the Client & then post specific questions here.
For standard SAP Process read SAP Building Blocks documents, there you will find many Industries Standard process.
Hope this clarifies,
Thanks,
Jignesh Mehta -
Replinishment for Trading industry.
Hi guru's
Can any one let me know can the replinishment process in WM can be used for the trading industry.
For trading industry process how this replinishment in WM works.
can you telll me the details about the configurtion and the master data to be maintained.
Regards
SunilHello Anwar,
Please dont post general question in the forum.
First take the Business Requirements from the Client & then post specific questions here.
For standard SAP Process read SAP Building Blocks documents, there you will find many Industries Standard process.
Hope this clarifies,
Thanks,
Jignesh Mehta -
Material Barcodindg in trading industry
Hello Folks !
Is anyone in this industry, managing inventory with barcodes? i am not talking about the documents, but the MATERIALS.
as per my knowledge theres no standards avaialble in the SAP for storing materials under barcodes. how are you folks managing the scenario? please share any knowledge you have.
Many thanks.
Ashwinhi Selvakumar,
Thanks for taking interest in my thread.
as u have said the barcodes are for unique identification and not for the price. here price is not at all a problem. the client sells the same article to 10 different customers at 10 different prices.
But my client is having inventory managed using barcodes already, i mean storage and movement. the products carry warranty , so to track when and to whom was it sold and for all other such reasons , the client wants to incorporate the same in SAP.
we are having tough time generating, printing and storage in tables and making MIGO with these barcodes and thereafter at every movement type, where products are moved from one place to other, barcodes needs to be enabled.
well, barcode will only contain details of products like material description and vender description. where it is fetched from the P.O, which is printed as barcodes....
did this give u a correct picture? let me know if u want to know more...
Thanks again Selvakumar
Ashwin.. -
How to create a job card and how to add waranty card in sales order
I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
VenkatHi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna -
In RG23D Register is it possible to update general sales
HI, Experteese,
My Client is a Trading Industry and they will do most of the times imports and becz nature of business he will pass
excise benefit to some particular excisable customers,
*here is the issue
In SAP we can make entry of vendor excise invoice into RG23D register and that time if I procure material from vendor qty*
10 it will show receipts as 10
*and if we do excise pass on for 5 qty it will show
receipts 10
issues 10
balance as 5*
I f we sale the remaining qty 5 to regular customer system will not update qty of material in excise qty
client wants all the sales should reflect the RG23D register
is it possible
Thanks
SriHi,
all
If I do GRN system will update excise registers qty as well as regular stock in MIGO itself I have set like this*
*When i do J1IJ system will update issue qty in RG23D it is doing the same*_
but as per my client "regular sales also should replicated to RG23D register without
Making Excise Invoice(benefit pass invoice).
Any inputs -
Segmentation in SAP B1 - comparison of segment-wise financial results
Dear Group,
We are in a trading industry using SAP B1 at our 15 outlets.. we have created 15 segments in SAP B1 to know the actual performance of each segment.
i would like to know how to get comparison analysis of segments in sap b1.. As p&l , b/s allow to choose only one segment. We can get the report of the selected segment at a time but we can not choose more than one segment to compare the results for analysis purpose..Hi Zal
If this person was an "Expert" on SAP Business One then the only way they would have changed dates would probably be directly in SQL itself. The best way to determine this would be to hope that they slipped up somewhere and forgot to change a particular date in let's say one specific table.
For invoices, start with the post date, doc date & create date. Then check each of these to the OJDT/JDT1 tables for any discrepancies. Next check the ADOC/ADO1 table for multiple instances on the invoice. If only 1 instance then check the create date, time & user as well as the aforementioned dates between OINV/INV1 & ADOC/ADO1. If multiple instances, check the dates from 1 instance to the next (This will indicate dates being changed in the system).
Next check the same dates against OINM table. If any of the dates do not tally then the SQL was changed directly.
Hope this helps. Let me know if you need further assistance.
Kind regards
Peter Juby -
Hi Experts,
We are working on SNP Optimization scenario with Transportation, Procurement, Strorage and penalty Cost. Our business process trading industry (we procure and sell).
We maintained Optmizaion profile with linear and Primal simplex Algorithm. We took a sample scenario where our product has four suppliers with diffrent transportation costs maintained in transportation lanes.
In SDP94, Optimizer behaving diffrently.
Case 1: When we run directly at destination location (product + Destination) level optimization running smoothly with out picking any transportation lanes, costs. Subsequently no purchase requistions are created.
Case 2: When we select all locations (Product + Source and Destination) and run optimization the following errors are coming which we are not able to identify the origin.
Error 1: Cost function 051MhWG07j6MwgLZXQcXSm not found
Error 2: Conversion from STD to EA for product WDE-MATL1A not maintained
Error 3: Error occurred when reading data
We checked CCR no errors are identified. Also there is no UOM called STD. We couldn't understand why Optimizer is proposing STD to EA conversion error.
Can you please throw some light.
Thanks in advanceHi Ugameswara Rao
When you run optimizer,you need to run as a whole including all teh Network...So,the first observation is standard
Regarding teh second issue,It is a Master data inconsistency,So,please identify the 'concerned location product' and maintain the cost accordingly(Check teh log to find the concerned location product)
Regarding error "Error occurred when reading data",please raise a seperate thread,as the raesons for this are multiple...but try this first run //om17,model consistency check and correct the data model set...but,the reason for this could also be a softwre error....hence,if the above don't help,please rasise a seperate thread with all details like: STEP in which thi serror occur,and also teh message log details
Thanks and Regards
Suresh -
How to create customer master data for walking customer in retail
hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanksDear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM -
Business one : multilocation invoicing
scenario : We have a prospect in retail and trading industry. They have six locations at present and a head office. The location will increase in near future. Their main activity is retailing through their locations. At locations : the main activity's are i) invoicing / billing and ii) stock checking and few reports at the end of the day.
Query: Is Business one will support multi location invoicing/ billing ?也有一个类似的问题:客户提出2005B怎么实现法语界面?
-
Hi Experts,
We are working for trading industry where we procure and sell the products. We haven't setup PPM/PDS. We are using Optimizer extensively. We have been facing the following two issues. If you encouter the same, please let us know.
-> We have saftey stock maintained in location master (Destination) with method SB. When we run optimizer system doesn't considering the safety stock and only considering the demand. Please suggest How do we make system to consider safety stock also as demand.
-> After Optimization, receipts are generated at Distribution receipts at Source even product is marked for "X" in procurement tab page at source level. Why system is not giving importance to Production receipts is worrying me. Can you please throw some light.
Thanks & Regards
UgameshHi,
Please first make sure that:
1)In product master, you have maintained safety stock on 'lot size' tab.
2)In product master, 'Procurement' tab, whether you have set anything for the below two fileds:
Prod. Storage Costs
Safety Stock Penalty
If storage costs is high, you may not get stock created.
3)In optimizer profile, you set other option than 'Ignore safety stock' on the first tab.
Then you go to /sapapo/opt11 to check the optimizer log. Find your log, and push the application log icon (on the second column).
In the Input log, there's a table calls 'ET_LOCPROD'. Check whether safety stock is correctly input.
You can also check result log, but if you use 'Expain' functionality, you may get a better view of the result.
Regarding the source of supply, optimizer source determination is based on costs.
If the costs on PPM/PDS is more than transportation lane, transportaion lane will be chosen and distribution receipts are created instead of production receipts.
Please refer to online help http://help.sap.com/saphelp_scm70/helpdata/EN/da/8df3128121304a8dc1eef961a6d3a8/frameset.htm
Source Determination in Supply Network Planning -> Source Determination (Optimizer)
Best Regards/Ada -
hi
To shift a material from source location plant X to destination location DC - Y -I incur a cost of Z amount-.in what all screens/fields do I declare the cost Z to my knowledge it has to be in
SAPAPO/TL
CSNP11 COST DIRECTORY
SNP1 OF MAT1
Apart from these can you think of any other screens .
In essence during SNP optimizer run the cost factor has to be take into account .How do I map this scenario.
experts plz mention the screen shots /t codes alone from that point I will try it out ,is that “ maintain SNP global parameters profile”” in any way relevant to this scenario. Bit perplexing ….would you please provide a helping hand.Hi All,
Thanks for your prompt response. I have started using second option but still I am facing the above issues. I dont see any issues in OM17, CCR.
Since my client belongs to trading industry, we dont maintain any PPM and PDS. We are running with Transportation, Storage, procurement and penalty cost.
I really dont understand why and how system throwing STD to EA converstion error in the optmization log. I dont see any UOM with STD. Also what is source for other errors. Can any one throw some light?
Thanks & regards -
I've use MD02 then MD04 to calculate materials consumption and list out the list. Acutally, our business is trading industry, So every parts is purchase externally. For single material, use md02 and md04 it is OK, because I just want to list out the material and convert PR to PO if needs, but for BOM materials, if put the mother materials in MD02 to calculate the consumption and then list out at MD04, it can be convert PR to PO, but it only for mother material only, I would like to know can I have a list, just put the mother material, the child component will be listed out also. and then convert to PO from PR. Thanks!
Hi
For Single material and single level ( ie Non BOM material ) use MD03, for single materail multi level ( ie BOM material ) use MD02.
If you want all Materails ( with BOM or without BOM ) use MD01, by specifying the USER EXit key you can process for all the materails that macthes the use exit key automatically.
In MD04 you ahve an option of Exploding the BOM details , it will show all the details of the child components
Regards -
Branch wise Trading Account for Manufacturing industry
Dear SAP FICO Experts
One of my client is required Trading account statement seperately for calculating gross profit (including other direct expenses)
We are using perpectual Inventory method for this client, and in this method SAP is calculating the COGS at the time of Each Sales transaction, and also this type of method invenoty value will post in the ledger account in every inventory transaction.
So My doubt is how do we prepare seperate Branch wise trading account for calculating the COGS and Gross profit.
We have different two three ware houses which will represent the branch for Stock. and i mention project code as branch which will map all Journal transaction, so i can take branch wise profit and loss account, because P and L account is only representing Revenues and Expenditure. But in trading account , two kinds of asset account is comming , one is Opening stock and another is closing stock.
Can anybody help me to find a solution, and is there any option in SAP B1 2007B to generate this Trading account ?
Thanks
RegardsHi......
Try the G/L Account maintain by item group wise. I think then only you can be able to assign the branchwise trading account......
Regards,
Maybe you are looking for
-
Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose
-
How to block calls based ANI for individual user?
I want to know how to block calls based on ANI for individual user in CUCM? Lets say if the individual wants to block calls from certain number. Malicious call id - softkey will not work for our purpose. calls come to cucm via mgcp gateway. cucm 9.
-
Error while uploading meter reads through BAPI_MTRREADDOC_UPLOAD
Hi, I am trying to estimate and upload meter reads on an installation through function module ISU_REGISTER_ESTIMATE and BAPI_MTRREADDOC_UPLOAD respectively. The output estimated read from ISU_REGISTER_ESTIMATE is fed to BAPI_MTRREADDOC_UPLOAD after r
-
Print drivers on Windows 7 & 8.1 Clients Missing dependent files
Hi, I have been driving myself crazy with this issue, and I have read the other various articles and applied the hotfixes listed in https://support.microsoft.com/en-us/kb/2864755/ I currently have a client who is using PaperCut with Toshiba printers,
-
Problem with attribute id in taglib
<req:headers id="hdrs"> <jsp:getProperty name="hdrs" property="name"/> = <jsp:getProperty name="hdrs" property="header"/> </req:headers> When the JSP gets compiled it throws an error that is does not know about