Training for Hydro-electric Power Station

I want to design a DAQ for hydro-electric power station with capacity up to 10MW. I want to find a training course for the above problem

Hello,
The data acquisition training course offerred by National Instruments can be found at ni.com/training. This class offers an excellent forum to learn quickly, and effectively, some of the basics and more advanced data acquisition topics. The course is offerred in a variety of different ways.
If it is help on your specific application, you could search our list of qualified alliance members for assistance in developing your application. ni.com/alliance.
Best Regards,
Jared A

Similar Messages

Ues of Electrical Power Suite for variable frequency test

My customer is doing capacitor testing. He would like to measure the phase angle whiile varying the source frequency. Can the Electrical Power Suite be used for this? If not can you make a recommendation (basically for measuring power factor)?

I do not have the Electrial Power Suite so I cannot comment on its suitability. In addition to posting here, there is an Electrial Power Suite on the Forums, although it gets very little traffic. Some of the NI people involved with the suite seem to monitor that Board.
Assuming that your customer has suitable instrumentation and data acquisition hardware, it should not be too difficult to measure/calculate phase angle with LabVIEW and standard DAQ drivers.
Can you be more specific about the equipment?
Lynn

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Electrical power energy auditing

I am doing a project on power supply monitoring system with labview. The main aim of the project is monitoring and data logging the signals from non contact type hall effect current sensors. Voltage and current are the two main parameters which is to be measured. Electrical power is the another parameter need to measure. I don't know how to start the task.
Help me......
Just give me a basic idea of how to start and provide me a basic vi for the task.

Hi sharavanen,
Sorry for replying late.
I suggest you refer to COMTRADE Logging examples from EPS toolkit. This example provides a solution to log voltage and current parameters (and other "electrical power" parameters if you add such VI's mainly from PQ category in the palette).
There are things that you should notice:
1. Choose your wiring method on the block diagram.
2. If you need to log more paramters, you have to add such VIs yourself. You can refer to Power Quality examples in this regard.
3. If you choose to use other target and/or modules than what's in the example, you have to modify the target in the project and/or FPGA VI to convert the fixed point data precision (details in the example's builtin help and description).

Will Non-DSA Simultaneous Cards (such as the 9220) Work with the Electrical Power Suite?

Hello, All!
I wondered if the 9220, and other non-delta-sigma (DSA) c-series modules, will still work with the Electrical Power Suite. From the overview on the product page:
Supported Hardware
C Series Modules
-The suite meets standard accuracy requirements when used with the NI 9225 (high voltage) and NI 9227 (5 A current) C Series modules.
-Compatible modules include any self-timed delta-sigma module such as the NI 9229, NI 9232, NI 9234, and NI 9239. Due to the lower voltage inputs, these modules require external voltage transformers.
-The resampling algorithms of the LabVIEW Electrical Power Suite are not designed for multiplexed modules, such as the NI 9201 or NI 9205.
Note that a few modules are listed explicitly, and it sounds like any self-timed delta-sigma module (eg the 9229, 9232, 9234, 9239) will work appropriately, and that multiplexed modules (eg 9201, 9205) will not work. However, what about non-DSA simultaneous cards such as the 9220? Note also that supported hardware is not explicitly listed in the 2012 EPS Readme, so I wanted to check.
Please let me know!
Will Hilzinger | Switch Product Support Engineer | National Instruments

[originally posted 7-19-2013]
Hello, Fang!
Thank you for the information! The question is from a customer who is an Alliance Partner. They don't have to use the 9220, but would very much like to. Please let me know if you have any further questions for me, and thank you again!
Best,
Will H | Applications Engineering | National Instruments
Will Hilzinger | Switch Product Support Engineer | National Instruments

PID control to maintain constant heater electrical power?

Hi!
I am looking for a good solution for the following:
I have a heater wire (approx. 220 Ohms). I drive this wire with DC voltage. I measure the voltage drop on the wire, and the current running through it. I want to control not the temperature, but the calculated electrical power (P=U*I) in the range of 1mW to 1W.
Of course the resistivity is slightly different at different temperatures, so that is why I think I need active control.
Maybe someone could give me a good advice?
Thanks very much!

Hi,
Everything is set up for the hardware. I generate the DC voltage with a NI Static waveform card (DAQmx). I measure the voltage drop and the current (via voltage drop measurement on a calibrated resistor connected in serial with the heater wire) with a Keithley DVM via GPIB card. The SetPoint is the required electrical power, the ProcessVariable is the calculated power from the measured U and I. The output is the driving voltage between 0-3 DC Volts, what I amplify with a factor 5.8 with an amplifier connected to the heater wire.
I try to use the PID.vi from the PID toolkit (I already use PI(D) controls from LabView for other heater wires, where I have to control temperature, and they work very efficiently and perfectly) for this purpose.
So far I try to find the proper gain values. My sampling rate is low, approx. 8 seconds. First I tried only the P control (zeroing the I and D gains of the PID.vi), to find a stable oscillation range, so I could go on with the PID Autotune vi. But no luck so far. I think it is also a problem, that this system is not linear: the P is not a linear function of U. Can you suggest how to go on from here?
Thanks very much!

3rd party N card for a G5 Power Mac?

Hi all!
I am considering buying a wireless card for my G5 Power Mac. My base station is only a .11g, but I figure I might upgrade somewhere down the line, so I might as well get a .11n card for the Mac if I go this route. As near as I can tell, Apple does not sell .11n Airport Extreme cards for the G5s, and probably doesn't intend to, yes? So, can I plug a standard 802.11n PC card into one of my G5 slots and have it work fine? Does anyone have a recommendation of brand for same?
Thanks in advance!

Do you have a source.
I just walk into a computer store, in England I use Maplin for example. I goto the networking section pick up a card that is say £6 for a PCI gigabit card. I look through the plastic sleeve inside the box and can see RTL printed on the chip. So I know its a realtek chipset.
But here ya go when I googled for 'cheap NIC card' I found
Gigabit Card $9
100baseT card $3
As it has a realtek chipset it should work on your mac with no extra drivers to install.

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

Check this thread where people have already given their suggestion on learning SSIS
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
Happy Learning!!
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!

Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!
I want to get the audio out of the lightning connection (the way you get audio when you connect it to a dock). It works properly with music, but when making a telephone call, it switches to the internal speraker. You can change to the external spekers, but you cannot select another audio out. It's also possible to get the telephone audio from the analogue connection, but that's not what I want. I want telephone audio from lightning...
Would be so great if anybody has an idea

I must also say that the second update ruined my Lumia's battery life.
With the first (out-of-the-box) update the phone usually had 30 percent of battery after a quite hard day (e.g. more than an hour of talking via bluetooth handsfree, more than two hours of listening to the music via bluetooth, more than an hour of browsing via wifi, and reading hundreds of e-mails via two mail accounts). I never managed to discharge it after one day (e.g. 14-16 hours) of continous use, no matter how much I talked, listened and browsed.
Now, with the secod update, it discharges to 20% after 12 hours of laying still almost without use (30 mins of music, less than 15 mins of talking and nothing more), and discharges completely with the usage pattern described above.
Did the second update contain some Android code?

Training for 1z0-051?

Hello all,
I have a requirement by my employer to achieve Oracle Certification. I passed 1z0-052 last week after studying off and on for the last year and a half. Next up is 1z0-051 or 061.
Fortunately my employer is funding a training class for this exam. We have 11g in our environment, so it is the 051/052 track I started on. I noticed on the 051 exam page that the recommended training is no longer offered. I'm planning to take the training class linked from the 061 page (Oracle Database 12c: Introduction to SQL Ed 1.1). Is this adequate/sensible training for the 051 exam? Or should I scrap 051 in favor of 061? I see that either will count towards OCA/OCP.
I am speaking out of honest ignorance here, but it seems that the material covered for 061 is completely applicable to 051. Any sage advice for me? Am I off track in my assessment?
Many thanks for any help you can offer.
-Alan

The 1Z0-051 and 1Z0-061 exams have about a 95% commonality in topics. The 'Introduction' section was added to 1Z0-061 and the 'Creating other schema objects' section that was in 1Z0-051 has been removed in 061. As such, the 061 training should prepare you for the vast majority of the 1Z0-051 exam.
That said -- there is no reason not to simply take the 1Z0-061 exam if that's what you are taking the training for anyway. I generally consider picking one over the other to be largely a toss up. Last week someone had the Oracle Press book for 1Z0-051 and was asking about taking 061. I suggested going with 051 since they had the study materials for it. In your case, the opposite applies, so I would suggest that the 1Z0-061 exam would probably be the (slightly) better choice.

Does there exist in Belgium voiceover training for imac and ipad for the visually impaired?

Does there exist in Belgium voiceover training for imac and ipad for the visually impaired?

I think that everything that he wants to do is very doable. It would be quite a project for someone to take on for him. If it is a popular hymnbook it may well be a welcome blessing/gift of love for many others as well if made available. As I would envision the project it would require either the sacrifice of a copy of the hymnal or the availability of a loose leaf version of the hymnal, so that the individual pages could be taken apart and scanned. The scanned pages could then be assembled into a pdf document that is easily readable on many apps available for the iPad. Better still would be to research if the publishers of the hymnal have not already created an electronic version of the book in pdf format. If the publisher has not already crossed this bridge, then their permission would legally need to be secured before starting such a project of copying their compilation of hymns. Even though they may not own the rights to an old hymn which is now in the public domain, they hold the rights to the layout and composition of the printed pages of their hymnal.
The Accessibilty settings in the iPad itself is capable of enlarging text for the visually impaired, as well as providing white text on a black background.

Suggestions for disks from Power Mac G4 Tower?

Hello fellow Mac users,
I still have the complete disk set for my old Power Mac G4 desktop system (it died and I've moved on to two MacBook Pros). Any suggestions for what I should do with them?
Thanks for the advice
Regards,
Vicki

Suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap After you join, post a FS (For Sale). Be specific about what model G4 they came with, because they may only work with that model.
 Cheers, Tom

Ramp Up Knowledge Transfer Training for EHP 4 Student Lifecycle Management

Dear Forum Members,
SAP's IBU for Higher Education offers a Ramp Up Knowledge Transfer Training for EHP 4 Student Lifecycle Management from March 16-18 in Walldorf, Germany. There are still open seats available. If anyone of you is interested in joining this event please check have a look at the recent blog published on this topic. There you find the link to the registration list.
Also we are currently evaluating the plan to offer the same training in India, Bangalore, at the end of April. Before we go ahead it would be helpful for us to know if there are consultants in this forum who would be interested in attending this training. It is currently scheduled as a 3-day workshop at SAP Bangalore in which the new features and functions of the latest release EHP 4 will be introduced and where participants get the opportunity to work in the RKT system.
If you would be interested in the RKT training offering in Bangalore please let us know via this forum thread.
Thanks,
Tina

Hello everyone,
thanks for your feedback in the last couple of days. It has been helpful in the decision making process.
We are now planning to offer this training at the following date and location:
Timeframe: Monday, April 20 until Wednesday, April 22
Location: SAP India, Bangalore
Please reserve these dates.
We will provide registration details and the agenda for this training offering after next week.
Looking forward to seeing you there!
Best regards,
Tina

FREE SOFTWARE AND TRAINING FOR 'INSTANT E-COMMERCE' IN EUROPE

FREE SOFTWARE AND TRAINING FOR 'INSTANT E-COMMERCE' from BEA Systems -
          the E-Commerce Transactions Company
          Attend BEA's free technical seminars, and you'll walk away with both the
          knowledge and the BEA WebLogic software to build and deploy
          personalised, reliable, and amazingly responsive Web sites.
          Don't miss these information-packed workshops scheduled for major
          European cities during March and April. We know you don't have time to
          waste, so you'll hear about how BEA can help you create "instant
          e-commerce."
          SEE HOW TO BUILD AN E-COMMERCE SITE
          With live demonstrations, we will lead you through the step-by-step
          process for building intelligent and reliable e-commerce sites. Learn
          how to build Web sites with a high-performance Commerce Server. During
          the three-hour seminar, you will see and hear practical insights into:
          · Personalisation and Portal frameworks
          · Creating 'shopping advisors' and building with EJB components
          · Ensuring reliability and scalability on the Web
          · Tying WAP into e-commerce applications
          LED BY BEA WEB TECHNOLOGY EXPERTS
          The sessions will be led by BEA technologists who have experience with
          hundreds of successful commercial installations to date using the BEA
          E-Commerce Transaction Platform - the solution used by organisations
          including British Airways, Vattenfall, Carrefour, Nokia, E*Trade,
          Deutsche Telekom, and Amazon.com.
          YOU GET A COPY OF THE LATEST E-COMMERCE SOFTWARE
          And, just for attending, you will walk away with a copy of BEA WebLogic
          Server and the new BEA WebLogic Commerce Server - the software you will
          see used to build an e-commerce site during the seminar. You will be
          able to practice your new skills as soon as you get back to the office.
          Seminar Schedule:
          21 March Zurich
          22 March Munich
          23 March Prague
          28 March Paris
          28 March Copenhagen
          29 March Hamburg
          30 March Frankfurt
          30 March Stockholm
          4 April Warsaw
          4 April Helsinki
          5 April Oslo
          6 April Dublin
          11 April Manchester
          13 April Madrid
          18 April London
          19 April The Hague
          20 April Brussels
          20 April Milan
          These practical workshops are FREE of charge, but spaces are very
          limited, so we advise signing as soon as possible.
          Visit http://www.bea.com/events/instant/ to find out more details and to
          register.
          Please note that the technical information at these seminars will be
          given in English.
          Best regards,
          BEA Systems, Inc.
          The E-Commerce Transactions Company
          www.bea.com
          For conference registration by phone: +32-11-300-640
          Learn how to build reliable, personalised e-commerce Web sites -- and
          walk away with FREE BEA software.
          Visit http://www.bea.com/events/instant/ to sign up for one of BEA's
          European 'Instant E-Commerce' seminars.


You could look at www.cartweaver.com
It plays very nicely with Dreamweaver.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Training for Hydro-electric Power Station

Similar Messages

Maybe you are looking for