Tranfering data from MIGO to Batch Characteristics

Hi,
Please let me know the procedure to tranfer the MIGO Field values to Batch Characteristics. Example Manufacturer name maintained manually in BADI field is required to tranfer to Batch Characteristics.
Regards
Mohan

Dear,
You can use the CACL_VALUE_CHANGE badi
BAPI_CHARACT_CHANGE may its help full to u.
SAPNote 519303 - FAQ: Goods movement with Transaction MIGO
explains that the user has to activly click the classification button in the batch tab.
Please refer this laos,
https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z
Regards,
R.Brahmankar

Similar Messages

  • Updating Batch classification data from MIGO for Purchase order

    Hi,
    I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
    1) Pass material and batch to MCH1 table to get CUOBJ_BM.
    2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
    3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
    4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
    I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
    Class type 023, object type MCH1, object RAW-6             0000001151
    Object is currently locked by user
    The assignment was not changed
    Please let me know how to do it. Is there any BADI or User Exit?

    Hi,
    As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
    I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
    Regards,
    Rafi

  • User Exit - Create Asset Master Data from MIGO

    Hi Experts,
    I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
    Cuold you help me?
    Thank a lot.
    Kind Regards
    Giampaolo

    Hi,
    Why you want to create the Asset master at the time of MIGO.
    Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
    If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
    If it is that important in your business process then give the authorization of Asset Master data creation to User.
    I personally feel this requirement is not feasible.
    Regards,
    Shayam

  • Question about tranferring data from iPhone 3gs to iPhone 4

    I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
    First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
    Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
    Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
    ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
    MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
    Thank you in advance, sorry for the long post.

    If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
    Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
    iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
    I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

  • Tranfering data from alv display to a transaction with table control.

    Hi all, 
    I am having some problem transfering data from my alv display to a trasaction which needs to display some values in a table control base on criterias which I have selected from my alv report.
    When selecting an entry in my alv report.
    1. The program should check whether there is an entry in a z table(already created), if so it retrieves data fro the z table base on the selected criteria.
    2.otherwise it search from the data from other tables and then saves it in the z table and display the values in the tc.
    my program is as follows.
    FORM button_click USING p_ucomm TYPE sy-ucomm
                            p_selfield TYPE slis_selfield.
      CASE p_ucomm.
        WHEN 'SALES'.
          READ TABLE gt_alvdisplay
          INDEX p_selfield-tabindex
          INTO gs_alvdisplay.
          SET PARAMETER ID:  *I dont know how to pass the para to the tc.....
          CALL TRANSACTION 'ztrans_test".
    ENDFORM.          
    Note: TC is already created and it retrieves data from the z table but am having prob just to pass the parameters.
    Ill be very grateful to you all

    Hello,
    Yes you can create text field without using screen painter as follows:
    PARAMETERS P1 TYPE CHAR12 MEMORY ID mid.
    Here, this code will create text box with name P1 and parameter id "mid"
    You can assign meaning text to p1 using menu link GO TO --> TEXT ELEMENTS --> SELECTION TEXTS.
    So before call transaction which contains this field you can write below statement.
    SET PARAMETER ID mid VALUE <value variable>.
    * Here vlaue variable is the variable from which you want to pass value to parameter id mid.
    Refer [SAP Help|http://help.sap.com/saphelp_nw70/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm] for more information.
    Hope this helps!
    Thanks,
    Augustin.

  • Tranfering data from an 8gb to a 32gb ipod touch

    Would like to know how or if you can transfer (apps)data from one ipod touch to another without losing the game data that you are upto?

    If you downloaded the apps on the Touch just "transfer" the purchases to your new install of iTunes (After you've set it up and authorized it please.)
    Right click on the Touch when you've connected it and select Transfer Purchases.
    Depending on how often you make purchases using the Touch you may have to make it a regular part of your routine.
    ... Or... you can keep the 8 GB strictly for apps, and many people now do, but you should still transfer the purchases to iTunes.
    It's hard to drop a desktop in the sink but it happens to iPods all the time.
    Message was edited by: Pamela Gadsden

  • How to tranferi data from newer to an older ibook

    I want to transfer the GarageBand files from a newer G4 to an older G4. When i use Firewire to move the data, it won't transfer the GarageBand files because the Mac I am transferring to has an older version than the one I am transferring from.

    What are the two system versions, i.e. 10.4.7?
    Yes the firewire should work.
    Here is a link to the Apple doc about target disk mode. Double check and make sure you are doing everything correctly.

  • LSMW-IDOC error while tranferring data from ECC to CRM

    Hi,
    We got an error
    Error status 'A' calling validation service.
    Validation error occured: "Module CRM_BUPA_MAIN_VAL, B Doc type BUPA_MAI".
    When we are doing LSMW with IDOC in CRM.
    Please provide ur valuable help in this problem.
    Thanks & Regards
    Sriram Tumuluri

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Tranferring data from external hard drive to Windows 7

    I just from Win Vista to Win 7 32 bit. I backed up my entire computer on an external hard drive. How do I get all my apps and itunes stuff back onto itunes so I can sync my iPhone 4?

    This link provides where your iTunes library is stored.
    http://support.apple.com/kb/HT1751

  • Tranferring data from iPad to iPad2

    I'm selling my first generation iPad and buying an iPad2.
    What should I do when the IPad2 arrives?
    When I connect it to my Mac, will it automatically transfer my stuff to the new model?
    Then do I erase the stuff on the first generation?
    Thanks
    Jeff

    The first time you connect the iPad 2 to your computer - the same computer used to sync your original iPad, you should be prompted to transfer the backup for your original iPad to your iPad 2. Be sure to sync your original iPad with iTunes immediately before connecting your iPad 2.
    Then erase your original iPad. On the iPad, go to Settings > General > Reset and select Erase All Content and Settings. This is a secure erase that erases everything but the firmware/OS.

  • Extract data from source table in ODI

    Hi,
    I am using ODI to transfer data between Oracle table to a flat file. Source database is very huge and has many partitions within that. In ODI can we extract the data using the partitions ? I want to have data from some partitions of that table, i dont have any other WHERE clause to use.
    Thanks,
    Ramesh
    Edited by: rameshchandra85 on Jun 22, 2009 4:34 AM

    Hi,
    I am tranferring data from oracle to File . So I using IKM SQL to FILE Append. There is no LKM used for that. Can you please suggest where can I add that ?
    Thanks,
    Ramesh

  • MIGO : Error when copying batch characteristics

    Hi,
    I've some problem on MIGO Tcode when i want to copy the batch characteristics.
    I work with class type 022.
    I create a GR from PO. (movement 101). My item line contained sub-items (with BOM). So i would like to copy the batch characteristics in reference of component batch values.
    I've implemented the UE "EXIT_SAPMM07M_004".
    Case 1 : In this UE, i fill a standard internal table (named VALUES) with the characteristics names and values i want to resume.
    and i use the FM 'CLFM_OBJECT_CLASSIFICATION' with the father and the son batch information in UE, i go to MSC3n and all characteristics are copied (even those unwanted). But when i go to MCS2N,  i retrieve the expected values.
    Case 2 : Only use the internal table, but some characteristics are not maintained.
    Case 3 : Only use the FM, but no characteristics are reversed.
    Does anyone could help me ?
    Thanks in advance
    Best regards.

    Hi,
    Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
    this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
    Cheers
    Dheeraj

  • Unable to capture data from drop down list in custom added field in migo tcode at item level

    Hi guys,
    need bit help in resolving query related to custom added field in Tcode migo.
    i have added a field in migo at item level ,in this i have used drop down list
    to get data but unable to capture data from drop down list.gown through
    many blogs in scn but unable to resolve.
    Please help me out in this.
    Thanks,
    Umakant.

    Hi,
    U can use following code to fill the list box
    write this code in PBO
    In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
    TYPE-POOLS vrm.
      DATA values TYPE vrm_values WITH HEADER LINE.
      TABLES: <ur custom Database table>.
      clear values, values[].
      SELECT * FROM <ur custom Database table>.
        values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
        values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
        APPEND values.
      ENDSELECT.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = '<SCREEN INPUT FIELD NAME>'
          values          = values[]
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
    Also please define the following before accessing the listbox value
    data: <listbox input field name> type <table field name>,
            <inputfield name where text to display> type string  in top include
    In PAI, select the text from the table into <inputfield name where text to display>  depending on value selected which will be called when enter key is pressed or any vale is selected

  • Copy of Batch characteristics value from material master to Batch

    Hi Gurus,
    I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
    Can any one help me to achieve this in standard way?
    Thanks
    Sandip

    Hi,
    Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
    Thanks
    Kumar 

  • Regarding Batch Jobs for migration of data from client DB to our local DB

    Hi Folks,
    GoodDay, Previously I worked as a Oracle Developer and recently shifted into a BIG organisation as PL?SQL developer. Here my base work is with INTERFACES(Stored Procedure). That is retrieving data from client DB and need to put the data in our staging tables. For that i created 2 INTERFACES(stored procedures). One is for one time migration. No need to run on regular basis. The second one is to run regularly why because if any updations are done in client DB that should be replicate to our DB. For that we need to run a BATCH JOB regulary 24X7 basis.
    But i dont have any working knowledge on BATCH JOB creation and running. Please let me guide on this issue ASAP.
    Regards,
    Ramesh.

    You can try
    dbms_job(9i)
    or
    dbms_scheduler(10g)
    just out of curiosity.. tell me if you are interested...
    what you were doing as a "oracle developer" ( is it like writing only "sql" )...

Maybe you are looking for