User Exit - Create Asset Master Data from MIGO

Hi Experts,
I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
Cuold you help me?
Thank a lot.
Kind Regards
Giampaolo

Hi,
Why you want to create the Asset master at the time of MIGO.
Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
If it is that important in your business process then give the authorization of Asset Master data creation to User.
I personally feel this requirement is not feasible.
Regards,
Shayam

Similar Messages

Validation user exit at asset master data

hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
Rob

Hope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

User exit to copy the data from sales order to billing document

hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudh

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

Import Fixed asset Master Data From Microsoft Excel

Hi
I'm trying to import fixed master data throught .txt file but it shows me the folowing error "The depreciation start date of asset "A2" for depreciation area "COLGAP" cannot be in the import fiscal year"
Where A2 is Fixed Asset Code and COLGAP is "Depreciation Area"
I attach some images with fixed assets setups and data template
Do you have any idea what is the error?
Thank you so much

Hi Deepak
Thanks for your answer. I checked your document and I followed it step by step, but I have another issue when I tried to import. It says "Cannot import "A2"; its active depreciation areas must be the same as those defined in the corresponding asset class"
I attach again the images. Can you tell me what is my problem?
Thank you

How long does it take to create material master data from PO lines?

Hi ,
I was wondering if I could use an expert's opinion on the time and effort (FTEs) that goes into cleaning 50,000 PO lines that contain item descriptions to create a clean item master and a (basic) catalog.
The idea is:
To remove duplicates, invalid, non recurring/ redudant items
To create categories and sub categories (Standard - no coding)
Is there any defined tool and process-steps, not only for SAP but in general? Do consultants do this manually (with Excel spreadsheets) or some other means.
Any references will be very useful.
Thanks and regards.

could be any time from a day to some months, just depends how big the mess is and how detailed the wishlist is and how well you want become.
Most consultants will do this probably with Excel as they are used to it.
Mixed tools can speed the process up if the people are used to those tools, or slow it down if they are not and need training before they can start.
Is it really only the description which will finally be different for some thousand materials that finally need to be created?
I would start with TAANA transaction, this would give me already an aggregated view on the items, as it can be used to group and count the items by description (and other parameters such as year) so it is down in seconds to the number of variations. Means the duplicates are eliminated.
Then you identify the one-time buys from previous years and remove them from the list (the output of TAANA can be worked on with Excel inplace)
Now starts the hard work to remove the garbage. This is usually a manual work, looking for typos which made this different from the same item with the correct description. And even identifying duplicates that are totally different written "Elbow - stainless steel" and "Stainless steel elbow" and far apart from each other in your list.
For this I use Excel with the Fuzzy Lookup Add-in
Watch some videos on youtube to see how it works, it's great.
And finally you load the materials with LSMW. If you are experienced with SAP material masters then you know which fields this materials need, they all could be defined as constants and your input file could only have the description, if that is really the only difference, which I actually don't believe. There might be differences in material group, in the unit of measure and usually in the purchasing group too (probably even more fields). And exact those differences in the other fields have to be considered in the cleanup too.
So, just technically eliminating duplicates and the worst garbage and all the one-time buys and finally load uniformed NLAG materials with just different descriptions could be done in a day. But the experience tells me that this can quickly evolve to a bigger long term project with harmonizing the way how the description will be written, harmonizing units and material groups.

Creation of asset master data

hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......

hi
check your depreciation area settings for the asset class

Import fixed asset master data

When I try to import fixed asset master data from an excel file to the Sap Business, a problem that I cannot identify occurs, and as a result, data is not imported. The process runs normally, data is processed but at the end an informational message says that zero data was imported. I would like to have help on this to solve this issue.

Hi all
Message was edited by: JEAN PIERRE LANCEAU
Problem resolved : see the addon logfile in %temp%/sap business one logs/addonlog.txt to show errors

How to activate fields under origin tab in the asset master data

Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
Ramachandra

Hello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra

To Create employee master data.

Hi,
How to create employee master data from scratch in SAP-HCM through BAPI's. Then we need to insert data in infotype 0000, 0001 and 0002 for that employee.
Thanks in advance.
Regards,
Rajesh Kumat

first check, if customizing for all fields is done.
You will need a action type for hiring a person with infotypes 0000, 0002, 0001.
Infotype 0001 is not so easy, because many checks are done in modul pool.
The number range for PERNR can be set to internal or external (its your decision), transaction PA04.
if you create a new PERNR you may wish to keep the old (legacy) one. you can use infotype 0032 or 0105, add it to the hiring action.
If your legacy data comes with a flat file LSMW is a good tool to import master data.

User exits for Sales Order Data

Hi,
May i ask if there's any user exit that will get data from Sales order like ex. the order qty and the net price and pass to SHP_OBDLV_SAVE_REPLICA like ex in the segment E1BPOBDLVITEMRFO of delivery note.
or get the commodity code (STAWN) from MatMas and pass also to SHP_OBDLV_SAVE_REPLiCA
Thanks in advance..
aileen

These are the user exits for VA01
V45E0001 Update the purchase order from the sales order
V45S0001 Update sales document from configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
Use this also USEREXIT_SAVE_DOCUMENT
Regards,
Shamma

Creating a new Validation-Asset Master data

Hi ,
Requirement- a warning msg to popup when the capitalized date in AS01 ( under posting information) is a date in a previous fiscal year.
A new validation step was created in GGB0 with the rule:
Prerequisit: Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Check:Capitalized on < Acquisition yr (ANLA-AKTIV < ANLB-VYEAR)
Message:Capitalization is done in a previous year (warning)
and in OAVC,
the validation was made active for the respective company code.
However , an asset creation is possible for a previous fiscal year but the warning message did not pop up.
Please assist.
Thank you,
Niludini A

Hi Niludini
you can simulate the validation rule by clicking at - GGB0>> Asset accounting > select the validation rule> select step " " and then select simulation option in the dropdown under Validation tab.
After activating simulation, please try to create a new asset in another screen without closing the similation tab in order to understand whther the validation is triggerred correctly.
Please also verify that, validation is created under master data and prerequisite may be added as T code - "AS01" .
Best Regards
Jomon

Create a specific user profile to Material master data

Dear colleagues.
We need create on R/3 4.6 a specific user profile for material master data, to create or modify (MM01/MM02) only the following views: 'Sales org. data 1', 'Sales org. data 2' and 'Sales:General/Plant data'. The problem is that when I use the SAP gui functions, I can create the profile, but also with the views 'Foreign trade: Export data' and 'Sales text'. Someone know how create this profile without this last two views? Thanks.

See:
http://technet.microsoft.com/en-us/library/cc262327(v=office.15).aspx#create
And a more complex, in-depth example leveraging MMS:
http://www.sharepointsteve.com/2010/10/making-custom-user-profile-properties-searchable-in-sharepoint-2010/
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Upgrade the DB from 2007A to 8.8 PL 10- Error in Fixed Assets Master Data

Dear Expert,
we r using smoothly Fixed Assets Add-on in 2007A environment, Now we are upgrade to SAP B1 8.8 SP00 PL10. When i view the Fixed Assets Master Data by choosing from List Its shows all of my master data list, but when i select any of them system shown nothing in FA Master Data form , please guide
Tahir

Hi,
I think the addon is corrupted. have you reinstall B1 addon ? if you have reinstalled but it is still as same, I suggest to upgrade the B1 version and the addon to the latest i.e. SAp B1 8.8 SP00 PL16. You can also log a message to SAP support but test this case first in the SAP B1 8.8 SP00 PL16 environment.
JimM

Create Asset Master Button does not appear while creating SC.

Dear Friends,
We are working on SRM 5 and trying SSP with classic scenario. The issue is while creating Shopping cart for account assignment Asset, system does not display Create Asset Master button.
We have maintained following configuration in our SRM system.
1.     The authorizations object M_BBP_*** is setup and activated for Employee creating shopping cart as well as RFC user.
2.     Attribute Asset Class (ANK) is maintained in Organization structure as per Backend asset class
3.     Attribute Account Assignment Category (KNT) is maintained for Asset in Organization structure
4.     GL account for product category and account assignment is maintained
Still while creating Shopping cart for Account assignment Asset system does not display button Create Asset Master.
Any idea which setting I am missing?
In R/3 I am able to create Asset master while creating Purchase Requisition.
Regards,
Sandeep Parab

Hi
<u><b>Please go through this -></b></u>
http://help.sap.com/saphelp_srm50/helpdata/en/03/340ff8a5c711d4b2d8000102ade1c8/frameset.htm
Asset Procurement in EBP
Re: Asset number creation in EBP ?
Asset Procurement in SRM 5.0
Re: Cost center in asset item
Note 492107 - Account assignment with asset (changes in EBP)
Note 492073 - Account assignment to asset when creating a shopping basket
Note 897843 - Mixed account assignment types with asset in extended PO
Note 732374 - No default values from attributes for account assignment
Note 921767 - Default settings: Account assignment data is blank in ECS
Note 588898 - Additional documentation for SAP Enterprise Buyer 3.0
Note 575654 - Additional documentation for SAP Enterprise Buyer 3.5
Note 750381 - Asset master number is not transferred from details (2)
Note 674802 - Asset master number is not transferred from details
Note 484020 - No Asset Class Description when creating asset master
Note 936541 - Subsequent note to Note 543055
Note 613671 - RAISE COMPANY_CODE_NOT_VALID with enclosure creation
Note 455124 - Error message on unavailable asset class
Note 579900 - Account assgnmnt screen 2000: asset class transltd incrrctly
Note 399377 - EBP transfer of the asset text via EBP (as of Release 4.5)
Note 493512 - EBP: Message 197 (BBP_PD) not displayed by system
Note 423307 - Messages (BBP_PD) 193/194/195/197/202 translated incorrectly
Note 202684 - No derived account asgnmnt information frm back end
Regards
- Atul

User Exit - Create Asset Master Data from MIGO

Similar Messages

Maybe you are looking for