Trans. ME32K. Batch Input. Problem in header versions with container

Hi all:
I've got a problem with the transaction ME32K.
The required action is meant to be changing the address delivery in the agreement position.
The bapi BAPI_AGREEMENT_MAINTAIN doesn't solve the problem because the field adrn2 is not present in this function module, so refering to other posts I've decided to implement a batch input.
The problem starts when I try to introduce REVOK and RSCOD in grid container in section header version. When I simulate the transaction ME32K with shdb the only code appearing is:
SAPLMEDCMV     0200     X     BDC_OKCODE     =GRIDENTER
                                                            BDC_SUBSCR     SAPLMEDCMV                              0100SUB0
SAPLMEDCMV     0200     X     BDC_OKCODE     =SAVE
     BDC_SUBSCR     SAPLMEDCMV                              0100SUB0
and then the values 'X' in REVOK and '0007' in RSCOD are not recognized.
How can I introduce the new version in header ?
Thanks in advance.
Jose Luis.

Hi Jose,
did you find a solution for your issue?
I have the same problem now.
Greets,
Valentin

Similar Messages

Batch input problem in SM35

Dear all,
I am uploading the bank statements using manual bank statements through Z transaction, Once uploaded system is generating the batch input session for the same.
When i run the batch input session system not clearing outgoing payment automatically based on the assignment field, as i have alreday mentioned the same assignment while posting the document and in the excel file.
I am getting the following message while running the batch input session.
No batch input data for screen SAPDF05X 3100
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Please let me know solution for the same.
Regards,
Anand

Hi,
This may not be a solution but may help you to isolate the problem
a) Are you able to load the bank statement for other banks without error ?
b) Try for the same bank in a different system .
c) If it is working for different bank then check the file format is the same for both the banks.
d) If it is working in different system check the ABAP code for any changes between the system,
e) Are you getting this message for all the line items or only for some line items ?
Regards
K.R

MC94 - Batch Input problem

Hi All,
I'm having a problem with MC94. I've used the recorder (SHDB) to create a batch input program but some of the fields I've used during the recording do not appear in the batch input program.
Any ideas?
Thanks.
Manu.

Hi
Has anyone have code for upload program code for
1) MC62 for infostructure. Actually i want to upload for season_category, promotion, catalog, generic article, variant article,site ..or any relevant to MC62..
2) MC94 change plan (consistent planning).. This is a matrix upload in my case is weekly 52 column against in my case for
a) sales at cost
b) sales qty
c) actual sales qty
d) avg selling price
e) lost sales qty
f) return qty
or any relevant to transaction MC94..
Can anyone provide me the codes pls..
THanx a ton.
Anthony

No batch input problem with Vendor master Upload

Hi All,
I am getting a problem with Vendor Master upload conversion. We have'nt change the code and configuration but when i try to run the code today its giving an error for particular Account group. I run this code yesterday and its work fine with that particluar Account group. But i am getting an error when i run the code today. The error is as follows "No batch input data for screen SAPMF02K 0610".When i got through the code i have'nt find that screen number.
Can anyone suggest how to resolve that problem.

Double click on the session name in SM35 and click on the screens tab there you can find the screen number.
process the same session in foreground mode and see if you are getting the same error.
If so, the new screen number you got is due to some change in the settings some where, show the new screen to Your Functional guy and he can help you.
There is one more chance where some data is missing in the flat file, just check it out.
Reward points if usefull.
Thanks ,
Veeru.

Batch Input Problem with PB10 - Updating IT22 via BDC

Hi out there,
I'm using PB10 to persist new applicants data.
Im processing after save the IT22.
In dialogmode i can just go back without putting input to it22. After going back the new applicant is saved successfully. Now it is possible to use pb30 to maintain (or new creation) of it22 for this applicant.
Now I recorded this "process" and after call transaction the system brings back an error that mandatory field p0022-endda is missing. this error exists also, if i fill the recorded map with data.
Batch Input in Background Mode ->Error
Batch Input in Dialog Mode -> IT22 Dialog appears with empty data
....Using "normal" Dialog Transaction OK!
Here's the code:
PERFORM: bdc_dynpro      USING 'SAPMPAP4' '0100',
           bdc_field       USING 'BDC_OKCODE' '=UPD',
           bdc_field       USING 'PSPAR-BEGDA' d_beginn,
           bdc_field       USING 'Q4000-WERKS' '0001',
           bdc_field       USING 'P0001-BTRTL' '0001',
           bdc_field       USING 'Q4000-APGRP' '1',
           bdc_field       USING 'Q4000-APTYP' aptyp,
           bdc_field       USING 'Q0002-ANREX' anrex,
           bdc_field       USING 'P0002-VORNA' vorna,
           bdc_field       USING 'P0002-NACHN' nachn,
           bdc_field       USING 'Q0002-GBPAS' d_gbpas,
           bdc_field       USING 'P0002-SPRSL' sprac,
           bdc_field       USING 'P0002-NATIO' natio,
           bdc_field       USING 'P0006-LAND1' land1,
           bdc_field       USING 'P0006-STRAS' stras,
           bdc_field       USING 'P0006-PSTLZ' pstlz,
           bdc_field       USING 'P0006-ORT01' ort01,
           bdc_field       USING 'P0006-TELNR' telnr,
           bdc_field       USING 'EMAIL' stamm-email,
           bdc_field       USING 'P4001-SPAPL' aptyp,
*IT22
           bdc_dynpro      USING 'MP002200' '2000',
           bdc_field       USING 'BDC_OKCODE' '=UPD',
           bdc_field       USING 'P0022-BEGDA' d_beginn,
           bdc_field       USING 'P0022-ENDDA' '31129999',
           bdc_field       USING 'P0022-SLART' 'XX',
           bdc_field       USING 'P0022-INSTI' 'FH Irgendwo',
           bdc_field       USING 'P0022-SLABS' '50',
           bdc_field       USING 'P0022-EMARK' '1.7',
           bdc_field       USING 'P0022-SLAND' 'DE',
           bdc_dynpro      USING 'SAPMPAP4' '0100',
           bdc_field       USING 'BDC_OKCODE' '/EEBAC'.
CALL TRANSACTION 'PB10' USING bdcdata
                           MODE 'E'
                           MESSAGES INTO messtab.
Error in messtab
Edited by: Timo Ehl on Oct 24, 2011 9:05 AM

Hi Kevin,
Is it really FB01<b>L</b>? I cannot find it in my 46c system?
Anyway, you can control this message as follows. Go to SM30, enter V_T100C and 'Maintain'. Enter 'F5' for application area in the subsequent pop-up.
In the table control, see if message number 192 is already there. If it is there, then change the value under column 'BatchI' to 'I' and save. If it is not there, then enter a new record for 192.
Hope this helps,
Srinivas

Batch Input Problems with CS01

Hi all,
      I have written a batch input program to create new material BOMs using CS01. The BOM gets its effective date from an ECM number which is entered into the RC29N-AENNR field in cs01. When the enter key is pressed to submit the data from the screen a warning message is posted by SAP to say "Date dd.mm.yyyy copied from change number".
This is all very well in manual input mode, where the message can be cleared by the user, but in batch input mode it stops the program dead in its tracks, and causes the whole batch input session to barf.
Can anyone tell me how I can clear this message in code so my program can proceed with adding the new BOM?
Thanks in advance,
Mark Wheaton

hi mark
in that particular screen add one more line in the coding like
perform bdc_field    using 'BDC_OKCODE'
                                  '/00'. or '=OKAY'
and you run in foreground then see what it happens
cheers,
sasi

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

Batch input problem

Hi,
I'm using a CALL TRANSACTION USING bdcdata. and i cannot get pass the OKCODE = '/00'. I always have to hit enter in the target selection. I cannot use AND SKIP FIRST SCREEN cause i have to pass a value.
Im must enter a contract transaction with a specified contract number.
Many thanks,
Alin.

Hi Alin,
In the code that i have shown will be of exactly of your requirement i mean until we press ENTER next records will be populated save the current records on the screen.
Here is the sample code working fine for me modify according to your issue..
FORM WRITE_RECORDS.
LOOP AT IT_TABDATA INTO WA_ITAB.
perform bdc_dynpro      using 'ZORMM' '0900'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'ZORMM-DDTIM'.
perform bdc_field       using 'ZORMM-BOKNO'
                               WA_ITAB-BOKNO.
perform bdc_field       using 'ZORMM-PASNO'
                              WA_ITAB-PASNO.
perform bdc_field       using 'ZORMM-TPRNO'
                              WA_ITAB-TPRNO.
perform bdc_field       using 'ZORMM-FMDAT'
                              WA_ITAB-FMDAT.
perform bdc_field       using 'ZORMM-VLDFR'
                             WA_ITAB-VLDFR.
perform bdc_field       using 'ZORMM-VLDTO'
                              WA_ITAB-VLDTO.
perform bdc_field       using 'ZORMM-DTIOP'
                              WA_ITAB-DTIOP.
perform bdc_field       using 'ZORMM-TMIOP'
                               WA_ITAB-TMIOP.
perform bdc_field       using 'ZORMM-NMINE'
                            WA_ITAB-NMINE.
perform bdc_field       using 'ZORMM-NLESS'
                            WA_ITAB-NLESS.
perform bdc_field       using 'ZORMM-NPTRS'
                          WA_ITAB-NPTRS.
perform bdc_field       using 'ZORMM-DESTN'
                           WA_ITAB-DESTN.
perform bdc_dynpro      using 'ZORMM' '0900'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
CALL TRANSACTION 'ZYM11' USING IT_BDCDATA MODE 'A' UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
REFRESH IT_BDCDATA.
Hope my answer helps you.
Cheers!!

Problem removing old versions with customization wizard 8

I'm trying to deploy Acrobat Reader 8 to our XP Professional desktops via Active Directory software installation (Windows Server 2003 domain)
I have obtained the MSI release of Reader 8, customised it using Adobe Customization Wizard 8, and deployed it through AD as per the Adobe documentation. This works as expected for new machines without a previous release of Reader installed.
However for desktops that have Reader 6 or 7 installed, we end up with two versions installed side by side (visible in Add/Remove Programs). Reader 8 works fine at this point. Removing the older version causes the PDF file association that Reader 8 created to be broken, also the Internet Explorer browser plugin is broken. Reader 8 has to be reinstalled manually to fix this issue.
I have read that Reader automatically removes old versions of itself when you install a new version. Additionally, when customising the MSI, "Remove previous version of Reader" is greyed out. However it appears that the installer is not removing old versions.
Any ideas as to a solution?
Thanks a lot
Tom Fanning

I have the same problem and i have wasted like 50 hours on this s**t. I'm trying to deploy reader 8 on our 1800 XP workstations with SMS 2003.
The cutomization tool is totally useless. The only way i have came up with is to create a script wich checks if earlier versions of Adobe reader is installed by looking if the installation folders exists (for example c:\Program Files\Adobe\Acrobat 7.0\Reader ).
If the installation folders exists, the script would run the uninstallatoin string of the reader using its Windows installer product code, like this:
MsiExec.exe /x /qn {AC76BA86-7AD7-1035-7B44-A70000000000}
Now, the problem with the script is that we have several versions of reader 6 and 7 including 3 different languages. The script or the .BAT file would be quite complicated and the testing is allmost impossible.
I think that it would be much more easier to create a script that deletes all the shotcuts for Adobe reader and then installs a Freeware product for openig PDF files.
http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer
In my opinion, adobe products are a nightmare for IT admins and their support system is even worse than Microsofts.

Problems using new version with many sites including facebook...how do I uninstall it NOW

Can't access a multi-list site for my business as a real estate agent...totally screwed up my chats on facebook...I want to uninstall this new version

-> [[Uninstalling Firefox]] - Uninstall your current Firefox
* REMOVE USER DATA AND SETTINGS
* Restart your system
-> Download latest Firefox version from one of these links using some other Web Browser:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> [[Installing Firefox]]
Check and tell if its working.

Problem building release version with C++ STL

I am using Workshop 6. I successfully built a library in debug mode. It makes extensive use of the C++ STL library. When I tried compiling the code in release mode the compiler "ccfe" process goes into a loop on certain files. I narrowed down the line of code in one file to a declaration of a std::vector<std::string> variable inside a method. If the declaration is the first line in the method, the compiler is able to create the .o file. If it is after other lines of code inside the method, the ccfe process uses a lot of CPU time, but never finishes. I have other files with the same problem.
Has anyone else run into this problem with ccfe in release mode? Is there a fix without modifying all the code?

I would try posting this question to the AIR forum. You might get better luck finding your answer there.
Thanks,
Joan

Delete only own batch-inputs

Hello,
I am having some problems with batch input authorizations. I want to give users authorizations only to delete the batch-inputs which have been created with their own user. I have seen the object S_BDC_MONI, but this object does not allow me to indicate that the user is only authorized to delete his/her own batch-inputs. Is there an standard authorization object that allows users only to delete their own batch-inputs?
I have also checked the possibility to create my own authorization object, the same as S_BDC_MONI but with a new field where I can indicate that only the own batch-inputs can be deleted. But if I do it will SM37 check this authorization? I don't want to indicate the user in this field, because then I would need a new role for each user. I need a field (similar to PSIGN) where I can say each user can delete only their own batch-inputs.
Any idea?
Thank you very much in advance.
Regards,
Maite

there's no solution to your problem, i'm sorry.
S_BDC_MONI only checks the name of the batch-inputs, not the creator or the username with whos authorization it is run.
creating your own object will only work if the calling program (SM35, SM37 ...) does the counterpart of the checking using authority-check. so simply creating an object and adding it to a transaction with SU24 will not work without the coding of the caller being adjusted. of course, this would be a major modification.
all you can do is to adjust your batch-input creating programs to apply those names to the batch-inputs that you can easily cover using S_BDC_moni.

Step by step batch input

Hi friends,
Please tell me about how to create a batch input from beginning to end.
How can I achieve the entry of the data?
sm35 or shdb is used to record the transaction steps?
One says sm35, the other says shdb?
Step by step?
Thanks in advance.

Hi,
BDC option
ABAP Runtime Environment (BC-ABA)
Batch Data Communication option.
BDC options define the processing mode for a batch input session.
Examples of modes used for processing sessions are:
     Display all records.
     Display for error dialogs only.
     Process session in the background.
     Process session on the screen.
Purpose
During data transfer, data is transferred from an external system into the SAP R/3 System. You can use data transfer when you:
     Transfer data from an external system into an R/3 System as it is installed.
     Transfer data regularly from an external system into an R/3 System. Example: If data for some departments in your company is input using a system other than the R/3 System, you can still integrate this data in the R/3 System. To do this, you export the data from the external system and use a data transfer method to import it into the R/3 System.
Implementation considerations
Before creating your own data transfer program, you should use the Data Transfer Workbench to find the data transfer programs that are delivered by SAP.
The Data Transfer Workbench
Purpose
The Data Transfer Workbench supports the automatic transfer of data into the R/3 System.
The Workbench is particularly useful for large amounts of data. It guarantees that data is transferred efficiently and ensures that data in the R/3 System is consistent.
Features
The Data Transfer Workbench provides the following functions:
     Integration of standard data transfer programs
     Registration and integration of your own data transfer programs
     Various techniques to load data into R/3.
The data is read from a transfer file in SAP format and loaded into the R/3 System using one of the techniques below:
     Administration and organization of data transfer projects
     Tools for analyzing the required SAP structures
     BAPI interface
     Batch input
     Direct input
Integration
SAP applications support the data transfer of numerous SAP business objects. The data transfer program specifies the data format definition that is necessary to import the data into the R/3 System. Adapt your conversion program for exporting the data from the external system to this definition.
Once the data has been exported, you can import it into your system using a generated data transfer program.
Features
     Data transfer from other, external systems
     Generation of data transfer programs
     Generation of function modules that can be used as an interface to the R/3 System
Initial Data Transfer
Prerequisites
Before you start the initial data transfer, you should have answered the following questions:
     Which business objects are to be transferred?
The objects to be transferred depend on the business applications you are using. If you are using sales and distribution processing, for example, you should transfer the material master records as well as the sales master records .
     How should the business objects be transferred?
Various techniques are available to load the data into the R/3.
Process Flow
The process of transferring data can be divided into the steps:
1.     Preparing the data transfer
     Analyzing and Cleaning Legacy Data
     Analyzing SAP Structures
     Developing Programs, Function Modules and BAPIs
     Creating a Program or FM for Data Extraction
     Creating a Mapping Program
     Registering Programs, Function Modules and BAPIs
1.     Executing the data transfer
     Organizing the Transfer in Projects
     Executing Data Transfer Runs, monitoring (CCMS) and processing (log)
     Checking transferred objects in R/3 using a function module or report (task type AUD).
The graphic below describes the steps involved in transferring the data:
ThThe The Data Transfer Workbench is an integrated project management for all the required steps involved in transferring data to your R/3 System.
You need to use programs or function modules for the various steps. SAP provides a range of BAPIs for loading data into R/3.
You could also carry out all the steps, except for loading the data via BAPIs, without using the Data Transfer Workbench.
In the first step you extract the existing data from a source system into a file and clean it there, if necessary.
To load data into R/3 you need a transfer file in an appropriate SAP format.
Using a mapping program you have to map the extracted data to the structures of the transfer file.
To load the data into the R/3 System one of the Techniques is used depending on the type of business object . I f more than one of these techniques is provided for a particular object type, you should read the documentation to find out what the different uses are .
Once you have created a project, you can start a run. The tasks of the run definition are processed in order.
After the data has been successfully loaded into the R/3 System, it can be checked here.
Result
You have transferred the data into the relevant R/3 application and checked it here.
Data Transfer
Purpose
During data transfer, data is transferred from an external system into the SAP R/3 System. You can use data transfer when you:
     Transfer data from an external system into an R/3 System as it is installed.
     Transfer data regularly from an external system into an R/3 System. Example: If data for some departments in your company is input using a system other than the R/3 System, you can still integrate this data in the R/3 System. To do this, you export the data from the external system and use a data transfer method to import it into the R/3 System.
Implementation considerations
Before creating your own data transfer program, you should use the Data Transfer Workbench to find the data transfer programs that are delivered by SAP.
Integration
SAP applications support the data transfer of numerous SAP business objects. The data transfer program specifies the data format definition that is necessary to import the data into the R/3 System. Adapt your conversion program for exporting the data from the external system to this definition.
Once the data has been exported, you can import it into your system using a generated data transfer program.
Features
     Data transfer from other, external systems
     Generation of data transfer programs
     Generation of function modules that can be used as an interface to the R/3 System
Data Transfer Methods
You can use the following methods to transfer data:
     Direct input: With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with the help of the screens. This means that direct input has considerable performance advantages.
     CALL TRANSACTION: Data consistency check with the help of screen logic.
     Batch input with batch input sessions : Data consistency check with the help of screen logic.
Difference between Batch Input and CALL TRANSACTION
If the direct input cannot be used for your task, this makes creating a data transfer program easier since the underlying transactions ensure that the data consistency checks are executed.
In the case of an error during the data transfer (if data records are inconsistent, for example), you can restart the transfer at the point in the program where the error occurred.
Batch input methods
With the batch input method, an ABAP program reads the external data that is to be entered in the R/3 System and stores the data in a "batch input session". The session records the actions that are required to transfer data into the system using normal SAP transactions.
When the program has generated the session, you can run the session to execute the SAP transactions in it. You can explicitly start and monitor a session with the batch input management function (by choosing System  Services  Batch input), or have the session run in the background processing system.
CALL TRANSACTION methods
In the second method, your program uses the ABAP statement CALL TRANSACTION USING to run an SAP transaction. External data does not have to be deposited in a session for later processing. Instead, the entire batch input process takes place inline in your program.
The information in Choosing Data Transfer Methods will help you decide which is the best data transfer method.
Data Transfer: Overview of Batch Input
Prerequisites
Before beginning the initial data transfer, you should answer the following questions:
     Which business objects are to be transferred?
The business objects to be transferred depend on the business applications that you will be using. If you are using sales and distribution processing, for example, you must transfer the material masters as well as the sales documents from your legacy system.
     How are the business objects to be transferred?
The data can be transferred either manually or automatically, using an SAP data transfer program or using your own transfer program.
Process flow
During the initial data transfer, data from the external system is converted into a sequential data transfer file and then transferred into the R/3 System using an SAP data transfer program. The data transfer file is the prerequisite for successfully transferring data as it contains the data in a converted format that is suitable for the R/3 System.
1.     Check to see if an SAP data transfer program (direct input, batch input or CALL TRANSACTION) exists for this data using the Data Transfer Workbench. Refer to the notes for this transfer program.
If no SAP data transfer program exists, proceed as follows:
2.     Determine the SAP transactions that a user would use to enter data records.
3.     Record these transactions using the batch input recorder. Ensure that you have filled all of the relevant fields with data.
4.     Use this data to generate a data transfer program.
5.     Display the Data Transfer Workbench and create your own data transfer object.
6.     Now follow the steps for transferring data using the Data Transfer Workbench.
The Transaction Recorder
Use
You can use the transaction recorder to record a series of transactions and their screens.
Features
You can use the recording to create
     Data transfer programs that use batch input or CALL TRANSACTION
     Batch input sessions
     Test data
     Function modules.
The recording can be executed several times. The screens are run in exactly the same way as they were run during the recording.
You can edit recordings that you have already made using an editor.
Activities
1.     To display the batch input initial screen, choose System  Services  Batch input Edit.
2.     Choose Recording. The system now displays the initial screen of the batch input recorder.
3.     Make a recording of the relevant transactions.
4.     Generate one or several of the objects named above.
Special features
     F1 -, F4 - and self-programmed F1 - and F4 help ( PROCESS ON HELP-REQUEST , PROCESS ON VALUE-REQUEST ) are not recorded. The same applies to all commands in the System and Help menus.
     Error and warning dialogs are not recorded. This means that only the OK code field and the field contents that lead to successful further processing in the current screen.
     " COMMIT WORK " in a transaction flow indicates the successful end of the transaction as regards batch input. The recording also ends successfully.
     " LEAVE TO TRANSACTION " in the course of a transaction indicates that it is not suitable for batch input. The recording is terminated.
     In ScreenPainter screens, movements in the scrollbar are not recorded. Use the function keys F21-F24 for positioning.
Recording Transactions
The recording forms the basis of generating data transfer programs, sessions, test data and function modules.
Procedure
1.     Display the initial screen of the batch input recorder.
2.     Assign a name to your recording.
3.     Choose Create.
4.     On the subsequent dialog box, enter the transaction code that you want to record and choose Continue.
The system displays this transaction.
5.     Execute the transaction in the usual way.
6.     When you have finished processing the transaction, the system displays an overview of the transaction and your input.
Choose Get transaction if no errors occurred while the transaction was being recorded.
If you do not want to keep the last recording that you made, go to the next step.
7.     Choose Next transac. If you want to record an additional transaction. Then continue from point 4.
8.     Save your recording when you have finished.
Recording
Once you have recorded the transaction, you can process it again later.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Execute.
4.     Choose one of the following processing modes:
A : Display all screens.
E : Display errors only. In the case of an error, the system displays the screen on which the error occurred. Once this error has been corrected, the system continues to process the recording until the next error occurs.
N : No display. The recording is not processed visibly.
5.     Choose the update mode:
A : Asynchronous update
S : Synchronous update
L : Local update
6.     You begin to process the recording when you choose Enter to exit the dialog box. When the recording is complete, the system displays a log that lists the name of the transaction, the system field SY-SUBRC and the system messages that were output.
Using the Recording Editor
The recording editor contains functions that you can use to edit your recordings.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Change.
4.     The following functions are available on the overview that the system displays:
Delete transaction from the recording: This deletes the selected transaction.
Add a new transaction to the recording: The transaction is added at the end of the recording.
Editing: You can edit the current recording.
If you choose Editing, proceed as follows:
5.     The system displays an editor where you can add and delete individual lines. You can also change the contents of these lines.
6.     If these editor functions are insufficient for your requirements, you can choose Export to download the recording onto your presentation host and use a PC editor to edit it there.
7.     Choose Import to import this file back into the R/3 System. Ensure that the file is still in the correct format.
8.     Choose Check to ensure that the edited version of the recording is still syntactically correct.
9.     Save your changes to the recording when you have finished editing it.
Generating Batch Input Sessions From the Recording
The data from the recording is transferred into batch input sessions that you can process for test purposes using the usual mechanisms.
Prerequisites
Before you can generate a batch input session, you must record the transactions through which the data is to enter the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and then choose Generate session.
4.     Enter a session name, a user with whose authorizations the session is to be processed, the identification whether the session is to be deleted once it has been processed and the processing date.
5.     Choose Continue to exit the dialog box.
You have generated a batch input session that uses the same data for the input fields that you entered when you created the recording. You can now process this as usual.
Generating Data Transfer Programs
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create program.
4.     On the following screen, specify a program name.
5.     You can also choose how the maintained field contents of the recorded screens are to be filled:
Transfer the values that were used during the recording. If you require a flexible data transfer, you must modify this program.
Set the parameters of the input values to be maintained and import these values from a data file. To set the parameters, the system creates a data structure and imports the data records from an external file into this data structure. The program assumes that the external file has been adapted to this data structure.
6.     If you have decided to set parameters for the input values to be maintained, it is useful if you create a test file when you generate the program. To do this, flag the checkbox and enter a name for the test file. For more information, see creating a test file.
7.     Choose Continue.
8.     The system displays the attribute screen of the program editor. Choose the relevant attributes here and save the program.
Result
You have now generated a data transfer program that you can use to import data into the R/3 System. The program can execute the data transfer using batch input or CALL TRANSACTION .
Generating Function Modules
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create function module.
4.     On the subsequent dialog box, enter a function module name, a function group and a short text for the function module. Exit the dialog box by choosing Continue.
The system automatically creates the function module.
Result
You have now generated a function module that you can use as an interface for your R/3 System. As well as information relevant for the data transfer, the function module's import interface has a parameter for each input field of the transaction recorded.
Using Function Modules
Prerequisites
The function module was generated from a recording made using the batch input recorder.
Procedure
1.     Cal the function module.
2.     Supply the generic interface of the function module:
CTU : Flag whether the data is to be transferred using batch input method CALL TRANSACTION USING . The system generates a batch input session if this flag is not set.
MODE : Processing mode:
A     Display all
E     Display only errors
N     No display
UPDATE : Update mode:
S     Synchronous
A     Asynchronous
L     Local update
GROUP : (If CTU is already specified): Name of the batch input session to be generated
USER : (If CTU is already specified): User with whose authorizations the session is to be processed
KEEP : Specifies whether this session is to be deleted once it has been processed
HOLDDATE : Specifies the earliest processing date for the error session
NODATA : Defines the NODATA character
3.     Supply the function module's special interface.
For each input field that was filled when you recorded the transactions, the system creates an import parameter. The recorded value is used as the default value for this import parameter.
Creating Test Files
To test the data transfer program that you have created, you can create a data record in a sequential file. This data record contains all the field contents from the recording that are relevant to the data transfer in the format required by the data transfer program. It is therefore useful if you align the format of your conversion program data file with the format of the test file.
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create test data.
4.     Enter a test file and exit the dialog box by choosing Continue.
You have now created a test file.
If the test file you have specified already exists, the system appends the new data record.
If you do not specify the path, the system archives the test file in the working directory of the current application server.
Executing the Data Transfer
Purpose
You generally use the Data Transfer Workbench to execute the data transfer. The following section describes how you transfer data directly using the batch input method.
Prerequisites
You require a data transfer program. This may be an SAP data transfer program, or you can create your own program.
Process flow
1.     Provide the data to be imported in a data file. Ensure that the data is in the correct format.
2.     If you are using a generated data transfer program, you can choose a data transfer method.
If you are only dealing with one data record, you can import this directly using a generated function module.
3.     Execute the data transfer program.
4.     Analyze the program and correct any errors that occur.
Writing Data Conversion Programs
The data conversion program is responsible for the following tasks:
     Converting the data that is to be transferred into the R/3 System as required by the SAP data structure or transactions that you are using.
If you are using an SAP batch input standard program, you must generate the data structure from the SAP standard data structure (see generating an SAP data structure).
If you develop your own batch input program, the data structure is determined by the R/3 System when the program is generated. Generate a test file from the recording and align the format of your conversion program with the format of the test file.
A conversion may be necessary for data type and length data type and length. The data type required by all standard SAP batch input programs is C, character data. You can find the required field lengths either in your analysis of the data declaration structure of the generated batch input program or in the data structures that you generate.
     The data is exported in SAP format to a sequential file. The batch input program in the R/3 System reads the data in from this file.
Process flow
The tasks involved in writing a data transfer program are shown in the diagram and list below.
Writing Data Conversion Programs
The data conversion program is responsible for the following tasks:
     Converting the data that is to be transferred into the R/3 System as required by the SAP data structure or transactions that you are using.
If you are using an SAP batch input standard program, you must generate the data structure from the SAP standard data structure (see generating an SAP data structure).
If you develop your own batch input program, the data structure is determined by the R/3 System when the program is generated. Generate a test file from the recording and align the format of your conversion program with the format of the test file.
A conversion may be necessary for data type and length data type and length. The data type required by all standard SAP batch input programs is C, character data. You can find the required field lengths either in your analysis of the data declaration structure of the generated batch input program or in the data structures that you generate.
     The data is exported in SAP format to a sequential file. The batch input program in the R/3 System reads the data in from this file.
Process flow
The tasks involved in writing a data transfer program are shown in the diagram and list below.
Selecting a Data Transfer Method
When you transfer data in ABAP, you have three options to submit the data for the data transfer. Only the first two methods can be recommended without reservation. The third method, by way of CALL DIALOG, is outmoded. CALL DIALOG is less comfortable than the other methods. You should use it only if you must.
     Use the CALL TRANSACTION USING statement
Summary: With CALL TRANSACTION USING, the system processes the data more quickly than with batch input sessions. Unlike batch input sessions, CALL TRANSACTION USING does not automatically support interactive correction or logging functions.
Your program prepares the data and then calls the corresponding transaction that is then processed immediately.
The most important features of CALL TRANSACTION USING are:
o     Synchronous processing
o     Transfer of data from an individual transaction each time the statement CALL TRANSACTION USING is called
o     You can update the database both synchronously and asynchronously
The program specifies the update type
o     Separate LUW (logical units of work) for the transaction
The system executes a database commit immediately before and after the CALL TRANSACTION USING statement
o     No batch input processing log
     Create a session on the batch input queue.
Summary: Offers management of sessions, support for playing back and correcting sessions that contain errors, and detailed logging.
Your program prepares the data and stores it in a batch input session. A session is a collection of transaction data for one or more transactions. Batch input sessions are maintained by the system in the batch input queue. You can process batch input sessions in the background processing system.
Your program must open a session in the queue before transferring data to it, and must close it again afterwards. All of these operations are performed by making function module calls from the ABAP program.
The most important aspects of the session interface are:
o     Asynchronous processing
o     Transfers data for multiple transactions
o     Synchronous database update
During processing, no transaction is started until the previous transaction has been written to the database.
o     A batch input processing log is generated for each session
o     Sessions cannot be generated in parallel
The batch input program must not open a session until it has closed the preceding session.
     Use the CALL DIALOG statement
Summary: Not recommended if you can enter data by way of sessions or CALL TRANSACTION USING.
Your program prepares data for a sequence of dialog screens, and calls a dialog module for immediate processing.
The most important aspects of the CALL DIALOG interface are:
o     Synchronous processing
o     Transfers data for a sequence of dialog screens
o     No separate database update for the dialog
A database update occurs only when the calling program executes a commit operation.
o     Shares LUW with calling program
o     No batch input processing log is generated
Executing Data Transfer Programs
Procedure
If you are using an SAP data transfer program, follow the procedure specified in the program documentation.
If you are using a generated data transfer program, proceed as follows:
1.     Start the data transfer program.
2.     Decide which batch input method you want to use for the data transfer.
a) CALL TRANSACTION USING:
You must specify the:
Processing mode: You use this parameter to specify whether processing should take place in the background or in dialog mode.
Possible values are:
A     Display all
E     Display only errors
N     No display
Update mode: This parameter determines how the data is to be updated:
Possible values are:
S     Synchronous
A     Asynchronous
L     Local update
Error session: Here you have the option to specify a session name for a batch input session in which data is to be written in the case of an error. You can use this to identify incorrect data records after the batch input program has run and to import the records into the R/3 System once you have corrected them.
If you are creating an error session, you must also specify:
User: Specify the user with whose authorizations the sessions are processed.
Keep session: This specifies whether or not the session should be deleted once it has been processed.
Lock date: Specify the processing date for the error session.
b) Generate session:
Session name: Specify a name for the batch input session to be generated.
User: Specify the user with whose authorizations the sessions are processed.
Keep session: This specifies whether or not the session should be deleted once it has been processed.
Lock date: Specify the processing date for the error session.
3.     Specify a character that is to be used as the NODATA character.
4.     Specify the path of the data file from which the data is to be imported into the R/3 System.
5.     Execute the program.
6.     If you have generated a session, or if errors occurred in CALL sTRANSACTION USING mode, you must now edit the generated sessions. You can find information on this in BC - System services in batch input sessions.
Batch Input Authorizations
You do not need special authorization - other than the ABAP run time authorization (authorization object S_PROGRAM - to run a program that creates batch input. Any user can create batch input sessions.
Starting processing for a session once it is in the queue is another matter, however. You can find more information on this in batch input sessions.
Creating a Session with BDC_OPEN_GROUP
Use the BDC_OPEN_GROUP function module to create a new session. Once you have created a session, then you can insert batch input data into it with BDC_INSERT.
You cannot re-open a session that already exists and has been closed. If you call BDC_OPEN_GROUP with the name of an existing session, then an additional session with the same name is created.
A batch input program may have only one session open at a time. Before opening a session, make sure that any sessions that the program closes any sessions that it previously had opened.
BDC_OPEN_GROUP takes the following EXPORTING parameters:
     CLIENT
Client in which the session is to be processed.
Default: If you don't provide a value for this parameter, the default is the client under which the batch input program runs when the session is created.
     GROUP
Name of the session that is to be created. May be up to 12 characters long.
Default: None. You must specify a session name.
     HOLDDATE
Lock date. The session is locked and may not be processed until after the date that you specify. Only a system administrator with the LOCK authorization for the authorization object Batch Input Authorizations can unlock and run a session before this date.
Format: YYYYMMDD (8 digits).
Default: No lock date, session can be processed immediately. A lock date is optional.
     KEEP
Retain session after successful processing. Set this option to the value X to have a session kept after it has been successfully processed. A session that is kept remains in the input/output queue until an administrator deletes it.
Sessions that contain errors in transactions are kept even if KEEP is not set.
Default: If not set, then sessions that are successfully processed are deleted. Only the batch input log is kept.
     USER
Authorizations user for background processing. This is the user name that is used for checking authorizations if a session is started in background processing. The user must be authorized for all of the transactions and functions that are to be executed in a session. Otherwise, transactions will be terminated with "no authorization" errors.
The user can be of type dialog or background. Dialog users are normal interactive users in the R/3 System. Background users are user master records that are specially defined for providing authorizations for background processing jobs.
Adding Data to a Session: BDC_INSERT
Use the BDC_INSERT function module to add a transaction to a batch input session. You specify the transaction that is to be started in the call to BDC_INSERT. You must provide a BDCDATA structure that contains all of the data required to process the transaction completely.
BDC_INSERT takes the following parameters:
     TCODE
The code of the transaction that is to be run.
     POST_LOCAL
Parameter to update data locally. If POST_LOCAL = X, data will be updated locally.
(refer to the keyword documentation of SET UPDATE TASK LOCAL for more information)
     DYNPROTAB
The BDCDATA structure that contains the data that is to be processed by the transaction.
DYNPROTAB is a table parameter in the function module.
Closing a Session: BDC_CLOSE_GROUP
Use the BDC_CLOSE_GROUP function module to close a session after you have inserted all of your batch input data into it. Once a session is closed, it can be processed.
Function Module BDC_CLOSE_GROUP
Exception parameters
Parameter     Function
NOT_OPEN     Client
QUEUE_ERROR     Internal use
BDC_CLOSE_GROUP needs no parameters. It automatically closes the session that is currently open in your program.
You must close a session before you can open another session from the same program.
You cannot re-open a session once it has been closed. A new call to BDC_OPEN_GROUP with the same session name creates a new session with the same name.
Processing Batch Input Sessions
When you create a batch input session, it remains in the batch input queue until it is explicitly started. Session processing can be started in two ways:
     An on-line user can start the session using the batch input menu options. (To access the batch input options, choose System  Services  Batch Input.)
     You can submit the background job RSBDCSUB to start a session in background processing. If several sessions have the same name, RSBDCSUB starts them all.
Its possible to coordinate the generation and execution of a session in the background processing system.
You can, for example, schedule both the batch input program and RSBDCSUB in the background. If you designate the batch input job as the predecessor for RSBDCSUB, then RSBDCSUB will be started automatically when the batch input job successfully completes.
Alternatively, you can schedule both the batch input program and RSBDCSUB as job steps in a single background job. In this case, however, RSBDCSUB is started even if the batch input program should terminate abnormally.
For detailed information about processing batch input sessions, see Managing Batch Input Sessions in the System Services guide.
Frequent Data Transfer Errors
The most frequent errors include:
     The BDCDATA structure contains screens in incorrect sequence.
     The BDCDATA structure assigns a value to a field that does not exist on the current screen.
     The BDCDATA structure contains a field that exceeds the specified length.
General guidelines
You should be aware of the following guidelines when you create sessions and call transactions or dialogs:
     You must provide data for all required fields on a screen.
     You can only specify the initial data for a screen. The system does not accept input as a response to a warning or an error message.
     If there is more than one possible screen sequence for a transaction or dialog, your program specifies the screen sequence for the transaction. You must transfer all screens that the dialog user sees to the selected screen sequence. This applies even if the screen itself is not used to input data.
Direct Input
To enhance the batch input procedure, the system offers the direct input technique, especially for transferring large amounts of data. In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not process screens. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or Transaction BMV0.
Examples for direct input programs are:
Program     Application
RFBIBL00     FI
RMDATIND     MM
RVAFSS00     SD
RAALTD11     AM
RKEVEXT0     CO-PA
Pls reward points.
Regards,
Ameet

Using data loading softwares better than SM35 as batch input

Hi All,
Can anyone tell me what are the pros and cons of using SM35 batch input in SAP as compared with commercial data loading software like win shuttle, data loader etc
Thanks in advance.

Our data loading software runs in the background, with each particular run set as a separate batch. It doesn't matter if this data comes from a program generated on site, or via a data feed interfaced from another system. With the transaction, SM35, I can look at each run and know immediately if any entry within that run did not post correctly, as well as those that did. I can view each transaction and get a detailed log on all that happened. If an entry failed to post, I can see exactly where within the posting process the transaction failed and why it failed. When we have a problem with a new - or recently changed, interface, SM35 is the tool I use to debug the problem fast. Another benefit of this batch input session is when a user tells me her/his interface failed. Often it didn't; someone just ran off with their interface report. In those cases, I don't have to restore & re-run anything. I just reprint the run to the relief - and gratitude, of the user.

How do I create a data set ready for a batch input session

Hi:
I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
Any clue would be great!!

You just have to do:
BDC_OPEN_GROUP (Open new batch)
BUILD BDC DATA (Your own code)
BDC_INSERT (Insert BDC data you have built in step 2)
BDC_CLOSE_GROUP (Close batch)
This will just create a new batch and it can be processed in SM35.
To build BDC data:
LOOP AT your_input_table.
<<here you have to use the code generated from recording in trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
ENDLOOP.

Trans. ME32K. Batch Input. Problem in header versions with container

Similar Messages

Maybe you are looking for