Trans. SO10 - Text for a SapScript

Hi;
I'm new with the sapscripts.
With the trans. SO10 i've created a text in development (mand. 140), what must i do to transportate this text to Qas (mand 200) and then to production (mand 300) so it can be used for the sapscript...?.
Thanks on advance.
David Fúnez
Tegucigalpa, Honduras
Corp. mandofer/Asin

Text Elements are a component/part of the SAP script and are not individual ABAP objects within the SAP environment hence they cannot be transported independently.
You would need to make changes in your text elements in the SAP script which would result in the SAP script being saved under a transport and moving the transport across the landscape would result in the text elements also getting transported.
In short: Move SAP script - to move text elements.
Regards

Similar Messages

Calling SO10 text into script

hi experts,
i have created a text in SO10 with
text name : ZTEST
LANGUAGE : EN
TEXT ID : ST
TEXT OBJECT : TEXT
USER NEED A EDITABLE TEXT IOPTION AND I HAV CREATED IT .
NOW I AM CALLING IT IN THE SCRIPT BY USING THE SYNTAX
INCLUDE TEXTNAME ZTEST OBJECT TEXT ID ST LANGUAGE EN
BUT IT IS NOT PRINTING ,...WHAT IS THE PBLM ....

Hi,
You can insert standard text(Transaction SO10) in SAPscript as following:
Go to editor of SAPscript form
Select menu Insert -> Text -> Standard
Input text object.
Select when you already input text object detail. System will automatically insert statement for including text object to SAPscript form.

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

Formatting Issues with SO10 text in Adobe forms

Hi Everyone,
I Have the below text maintained in SO10.
"Thank you for choosing Enterprise. We look forward to seeing you at 9:00 am on Monday, November 28, 2011. This message is to confirm you have updated your reservation. Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500 neighborhood locations."
I have created an text module of type include text in Adobe form context. the text which has to be bold is not being displayed as bold and the line space after first paragraph is being skipped out and the 2nd paragraph is being displayed as the continuation of the first. The out put looks as below
"Thank you for choosing Enterprise. We look forward to seeing you at 9:00 am on Monday, November 28, 2011. This message is to confirm you have updated your reservation. Following are the details for the updated reservation: P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500 neighborhood locations."
I tried Styles using SE72 on the SO10 text. And I cannot assign smartform styles on SO10 text in Adobe forms.
Greatly appreciate your suggestions and solutions.
Thanks,
shalini

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

Texts for Item in Sapacript

Hi guys,
Somebody know how can I get the text for item in the RFQ and show it in the sapscript?... Maybe I can use INCLUDE && OBJECT && ID && LANGUAGE & But how works it?
Thanks in advance!
Regards.
marisol

ok, i think i have it. i wrote a method in the class Client that allows me to get the account number from the account . and everything compiled GREAT. all 4 clasees!! BUT it won't run. i am gettting some strange error and i have no CLUE what is going on.
java.util.NoSuchElementException
     at java.util.StringTokenizer.nextToken(StringTokenizer.java:259)
     at BankDatabase.readFile(BankDatabase.java:26)
     at BankingSystem_hw7.main(BankingSystem_hw7.java:366)
Exception in thread "main"
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
eeeeekkkk. anyone have any ideas?
thanks
crq

Using formats of SO10 text in Adobe forms

Hello guys,
I got a question concerning the interaction of SO10 texts with adobe form text fields.
I know there are some threads about it here, and I think I understand the default SAP behavior, but can you please confirm if I am right? Then I got a special question about one case.
So is it right that there is only the difference between formatting the textfield itself in adobe form layout and adding a style to the text field in form context?
This means:
(1) Whenever in my text field in form context no style is added, the adobe form will take the formatting like it is done in the adobe form layout? This would mean that every format which is entered in the SO10 text is insignificant for the adobe form?
(2) Whenever in my text field a style is added, SAP will use SO10 text formats? This means, SAP searches for the smartforms style which is entered in the textfield and uses the formats from SO10 text like they were defined in the smartforms style?
Is this correct so far?
Now the special questions:
(1) What happens if a style is added, but the style does not exist as smartforms style. Which font etc. will be used then?
(2) What happens if a style is added, but the format of SO10 text does not exist in the smartform style?
In both cases it looks like SAP takes some "default" style, but where does it come from?
Thanks a lot!
Regards
Michael

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

ICSS B2B Standard SO10 text in problem description not shown in ICSS

Hi all,
we have created a standard text in SO10 which should be determined in the problem description field in a service ticket using standard text determination customizing and an access sequence using a copy of the standard function module.
This works fine in the web UI (and GUI). But the standard text does not appear in e-service. We actually created the standard text for e-service purposes because it serves as a questionnaire to make sure the customers give us all required info.
Does anyone know how the text can be displayed in ICSS application ?
Best regards
Annette

Hi, Annette
Please read topic with similar issue:
How to set Header Note on ISA B2B Order
Only text = 1000 showing in B2B-appl .
Denis

Hi..how we enter standard text for smartform using include text

hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get text

Hi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad

Print text vertically in SAPScript

Hi,
How to print text vertically in SAPScript?
Can we use controls for it?
Please help its urgent.
Thanks,
Madhura

You can print horizantally. using the following code
You know the total length of your text right.
You need to have conditions to avoid unnecessary spaces.
If &v_text(1)& is not initial.
ph &v_text(1)&
endif.
if &v_text+1(1) is not initial.
ph &v_text+1(1)
enddif.
if &v_text+2(1) is not initial.
ph &v_text+2(1)
enddif.
But we cant rotate letters to left . Not sure . Will explore on it and let you know.
Reward points if useful.
Regards,
Nageswar

Problem in including text id in sapscript

Hi,
I am using the following command to include a text id in sapscript.
INCLUDE &VBDKR-XBLNR& OBJECT VBBK ID Z001 LANGUAGE &VBDKR-SPRAS_VKO&
But the text is not showing in form. Now when I debug the sap script I found that altough VBDKR-XBLNR is holding value 0060000120 but the at include commant the value passed is 60000120.
So the text id is not found.
How to resolve this problem.
Regards,
Mainak

Solution:
INCLUDE &VBDKR-XBLNR(K)& OBJECT VBBK ID Z001 LANGUAGE &VBDKR-SPRAS_VKO&
see the (K) within your variable &VBDKR-XBLNR(K)&.
this k makes him skip conversion routine which is responsible for cutting the leading zeros.
/edit
You can as well use VBDKR-TDNAME which is by default your invoice number WITH leading zeros.
while VBDPR-TDNAME is your invoice number with leading zeros AND your position number right concatenated to it.
Edited by: Florian Kemmer on Mar 4, 2009 3:43 PM

Where can I find the Billing Doc. Header Text SO10 text name?

I have to write some logic in the billing document header text “country of origin”.
VF02-- GOTO-- HEADER---HEADER TEXT----- COUNTRY OF ORIGIN.
When a billing document is created it automatically creating the header text with the following details:
Name : Billing doc number
Language : EN
Text ID: ZD17
Text object : VBBK.
I need to find the SO10 text name from which the above dynamic text is generating, so that I can change the code in the original text..
I searched in the SCN and found the Tcode VOTXN.
I went to this tcode and selected the Billing Doc. Header Radio button.
And I found the Access sequence number corresponding ID(ZD17-country of origin)
When I gone through the sequence number I found one SO10 text name, but that is not the right SO10 name because the contents are totally deferrent.
is there any way to find the SO10 text name, or did I went to any wrong path...
please help me..
Regards,
Ramesh

Double on the right hand side and Click on Goto-> Header for the Name and object details.

Header and Item Texts for Sales Order

Hi,
Can any one help me on Header Text and Item Text...........
<b>STXH & STXL</b>
TDOBJECT :__________
TDID:_____________
TDNAME :_______________
Regards,
Raghunath.S

Hi
Double click on the related text
it will open Text editor
from Menu GOTO-> header
for SO HEADER Texts
then you see the 4 paramters like OBJECT (VBBK),ID,OBJECTNAME (sales Order No) and LANG
FOR SO ITEM texts
OBJECT (VBBP table), ID, OBJECTNAME(SO no plus ITEM No) and LANG
You have to pass these 4 parameters to READ_TEXT fun module to fetch the corresponding texts
see the doc on READ_TEXT
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

The long text for purchase order text field in mm03

Hi,
     Please provide me long text for purchase order field.in mm03 the view purchase order text having the long text for purchase order.this is enter when ever your creating the material.but we have table and field name for that and also how to handle this long text.please provide me urgently.
Thanks & Regards,
Radhakrishna.

Hi,
A sample code for ur requirement.
TABLES : ekko,   "Purchasing Document Header
         ekpo,   "Purchasing Document Item
         thead. "SAPscript: Text Header
DATA: t_theads LIKE stxh OCCURS 0 WITH HEADER LINE.
DATA: t_tlines LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: v_ebeln_ebelp(15) TYPE c.
TYPES: BEGIN OF t_download,
       ebeln LIKE ekko-ebeln,
       ebelp LIKE ekpo-ebelp,
       tdobject LIKE stxh-tdobject,
       tdid LIKE stxh-tdid,
       tdspras LIKE stxh-tdspras,
       count(4) TYPE c,
       tdformat LIKE tline-tdformat,
       tdline LIKE tline-tdline,
     END OF t_download.
TYPES: BEGIN OF t_header,
      line1(20) TYPE c,
      line2(20) TYPE c,
      line3(20) TYPE c,
      line4(10) TYPE c,
      line5(10) TYPE c,
      line6(10) TYPE c,
      line7(10) TYPE c,
      line8(10) TYPE c,
      END OF t_header.
DATA: g_filename TYPE string.
DATA: gt_header TYPE STANDARD TABLE OF t_header.
DATA: gs_header TYPE t_header.
DATA: gt_download TYPE STANDARD TABLE OF t_download.
DATA: gs_download TYPE t_download,
    gt_tlines   LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: v_subrc TYPE subrc.
DATA: v_nb_lines TYPE i.
DATA: v_ok TYPE i.
DATA: v_ko TYPE i.
DATA: v_ow TYPE i.
DATA: p_fname TYPE string.
DATA: g_append.
                          SELECTION SCREEN                          *
SELECT-OPTIONS : s_ebeln FOR ekko-ebeln.
PARAMETERS:
   p_filedn(132) TYPE c OBLIGATORY,
   p_file(132) TYPE c OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_filedn.
PERFORM file_f4_get CHANGING p_filedn.
START-OF-SELECTION.
*Select all the purchase order corresponding to select criteria
CLEAR t_theads. REFRESH t_theads.
SELECT *
FROM ekko
WHERE ebeln IN s_ebeln.
*Select all the text for P.O. header
    SELECT * FROM stxh
          APPENDING TABLE t_theads
          WHERE tdobject = 'EKKO'
          AND tdname      = ekko-ebeln.
*Select Item of each P.O.
    SELECT *
    FROM ekpo
    WHERE ebeln = ekko-ebeln.
      CONCATENATE ekpo-ebeln ekpo-ebelp
      INTO v_ebeln_ebelp.
*Select the text for P.O. item.
      SELECT * FROM stxh
            APPENDING TABLE t_theads
            WHERE tdobject = 'EKPO'
              AND tdname   = v_ebeln_ebelp.
    ENDSELECT.              "select ekpo
ENDSELECT.             "select ekko
DESCRIBE TABLE t_theads LINES v_nb_lines.
LOOP AT t_theads.
Read the text from pool
    CLEAR thead.
    REFRESH t_tlines.
    CALL FUNCTION 'READ_TEXT'                               "#EC *
         EXPORTING
              id                      = t_theads-tdid
              language                = t_theads-tdspras
              name                    = t_theads-tdname
              object                  = t_theads-tdobject
         IMPORTING
              header                  = thead
         TABLES
              lines                   = t_tlines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    MOVE-CORRESPONDING thead TO gs_download.
    gs_download-ebeln = thead-tdname+0(10).
    IF thead-tdobject = 'EKPO'.
      gs_download-ebelp = thead-tdname+10(5).
    ENDIF.
    gs_download-count = 0.
    LOOP AT gt_tlines.
      gs_download-tdformat = gt_tlines-tdformat.
      gs_download-tdline = gt_tlines-tdline.
      gs_download-count = gs_download-count + 1.
      APPEND gs_download TO gt_download.
    ENDLOOP.
    CLEAR gs_download.
ENDLOOP.
END-OF-SELECTION.
Hope this helps.
please reward points if useful.
Regards
rose

How to assign my customized smart style to the SO10 texts?

Hi .
In the standard text which we enter through SO10, I want some of the words to be coloured(blue) and some lines should be highlighted with yellow backgnd colour.
For the first part at least, how can I change the SO10 text's style to my customized style?
I can see the style list in text editor format menu->change style, but there, only some of the styles are able to select and I am not able to see my own customized style created through the tcode /NSMARTSTYLES.
Please help.
Rgds,
Madhuri
Edited by: madhuri sonawane on May 24, 2010 12:43 PM

Hi Maduri,
Check this link.....
Using custom styles in SO10
Hopet it is useful..
Regards,
Raj.

Error while trying to retrieve text for error ORA-12154

Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lot

The web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01

Trans. SO10 - Text for a SapScript

Similar Messages

Maybe you are looking for