Transaction for activate the integration model

hi,
   i created integration model using cfm1 transaction , how to activate the model ? in which transaction.
regards
muthuraman.d

Hi Mathuraman,
you can use the transaction CFM2 to activate your generated Integration Model. This transaction is used both for activation and deactivation of the Integration model.
For Initial transfers you can  use the program RIMODINI also.
Let me know if it helps.
Regards
Gaurav

Similar Messages

  • CFM2 Activate the Integration Model

    Hi Gurus,
    I have created the integration model using CFM1 and when I try to activate the Integration Model in CFM2 I get an error "OUTBOUND QUEUE BLOCKED".
    SYSTEM: PAPCLNT400
    FUNCTION: /SAPAPO/CIF_PROD_INBOUND
    TEXT: THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE
    I am getting this error in Production, but when I try it in QA System it works fine.
    I am unable to figure out the issue.Please help me with the solution.
    Thanks,
    Deepthi

    Hi Deepthi,
    Try these steps for analysing the error.
    Run transaction CFM2 and you will come across the same error (THE ABAP/4 OPEN SQL ARRAY INSERT RESULTS IN DUPLICATE).
    2) Go to APO and run transaction /SAPAPO/C3.
    3) In TIME RESTRICTION Section on the screen enter tentative time the error must have occured (This step is more from getting nearest log that has been written)
    4) In the LOG CLASS select "Only Important Logs" and then execute (F8).
    The log will get generated and will provide you some input for your analysis.
    Hope this helps you.
    ASHUTOSH

  • Dump is program RIMODAC2 - Activate/Deactivate integration model

    Hi APO guyz...
    Background job of program RIMODAC2 - Activate/Deactivate integration model fails with following error "TSV_TNEW_PAGE_ALLOC_FAILED"..
    Can somebody tell me what is the reason behind that and how can we resolve it...
    Thanks a lot !!
    - D

    job in  failed with a memory space problem or too many orders are read.Generally when reading large datasets of the table  a short dump occurs with message TSV_TNEW_PAGE_ALLOC_FAILED.
    Please rerun the IM model , it will resolve the issue or split IM data into 2/3 IM so that volume is distribute which may resolve your problem.
    Also if IM is set up for all the object together , please split IM for individual object.
    If problem still persist than check for OSS message.
    Note 903715 - Initial data transfer: TSV_TNEW_PAGE_ALLOC_FAILED
    Note 137932 - Short dump TSV_TNEW_PAGE_ALLOC_FAILED in LCOIAU05
    Manish`

  • Cannot Activate the Integration Process

    Hi Friend,
    File Merging:
    ==========
    I wonder why the receiver step not taking the " Use Correlation" or "Activate Correlation" value even after creating the correlation list and check(F7) the same.
    At receivers step in Graphical Definition(BPM) I can see the red question mark against Activate correlation value, I can see the value to choose. But when I choose the value and save the value does not stay there it disappears.
    I feel that the correlation list value is not been activated and hence unable to use it for the receivers steps.
    When I activate the Integration Process, below is the error message appears.
    Activation of the change list canceled
    Check result for *Integration Process kanchuBPM_IS | http://kanchuBPM_merge.com:  *
    Step does not use any correlations 
    Step does not use any correlations
    One more information:
    Used steps in BPM....
    Fork :  Fork1
    Receive: Receive1
    Receive: Receive2
    Transformation: Transformation1
    Send: Send1
    Here the problem is at Receive1 and Receive2 steps. - Unable to choose the correlation value created.
    Regards,
    Venkat Ramana K.
    Edited by: Venkat on Dec 9, 2008 3:09 PM

    Hey Carlos,
    Did the SXMB_MONI and IP.
    Got th ebelow error message:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Unable to figure out what could be the problem..
    Please help me and guide me in detail to clear th error .
    Regards,
    Thank you.

  • Kindly let me know the transaction for checking the Status of par.User?

    Kindly let me know the transaction for checking the Particular Users Status?
    I mean to say,Which Transaction is he into?
    Or Is he/She Logged on to a particular System?
    Regards,
    Shashank.

    Hi,
    Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
    Regards,
    Sujit

  • What is thr transaction for posting the checks.

    Hi
    What is the transaction for posting the checks
    and i want to get details based on the posting date. so any one tell me the tables used in this.

    What kind of operation are you talking about.
    For example :
    F-53 , F-58, F110 are transactions to post vendor paymment with check
    F-28 transaction to post customer payment with check (without creating it)
    FF68 for check deposit
    Regards

  • Can you tell the transaction for creating the client.

    can you tell the transaction for creating the client.

    Hi,
    Please check this links.
    http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm
    http://www.sap-img.com/bc049.htm
    Cheers,
    Simha.
    Reward all the helpful answers..

  • Locking of Transactions for MM - FI Integration

    Every month, we do the closing of accounts. For this, we have to close all GRN related transactions, so that the accounting entries are not passed. We use trxn SM01, to lock, MIRO, MIGO, & ML81N, so that user does not book any entries for that month.
    Is there any other better way to achive this ?? if yes, can it be done by the user department , instead of coming to IT, to lock the transactions
    thanks
    amit

    Hello,
    There is fixed solution on for what you are asking.But its little bit tricky.
    If you are aware of Validation rule .you can go and customise your requirement or take ABAPERS help.
    Please use tcode GBB0 & Ob28 to create validation
    For e.g
    Prerequisite.
    If posting day is after last day of month & tcode is MIGO,MIRO,etc
    CHECK: User ids(only these user will have option to use this trx else it will give error.you can keep this access to only few like urself)
    Error: Posting not allowed in previous month.
    likewise you can custoimise your requirement.

  • How do I install and/or activate the "Channels Model.InDesignPlugin" for InDesign CC 2014?

    I need to package my files today for an online class using InDesign CC 2014 and I keep getting this error message:
    Where and how do I either install or activate this plugin?
    Thank you for any help provided on this matter.

    Hi, Larry
    Thanks for responding. Yes: I have tried  both ways: First to Save file, then Export to .idml, then reopen to package while inside InDesign  -and- as Save file, Export to .idml, Save, Close file, then Reopen as .idml, to package. I also tried a straight out export to PDF and all I get is a blank page with registration, bleed, and crop marks.
    Very weird and frustrating. I checked my Extensions Manager just to make sure I didn't miss anything or if I could activate it from there. Channels Model.InDesignPlugin or anything resembling that does not exist. I have been searching on Google to see what I can find. My instructors are aware of the issue so far but this is greatly impacting two of my classes.
    Last things I have tried were a full uninstall and re-install  since my last post just to see if that would work. Nothing. Same issue still. The .indd verison opens per usual with missing three types of plugins that are YTDChannel related. Even though if I don't need this plugin as mentioned previous by /u/jmlevy, then why is everything coming up blank?
    Thanks to everyone trying their best to help me.

  • Is there a VI for controlling the integration time of a Keithley 2000?

    Dear All,
    I want to do some voltage noise measurements using a Keithley 2000, by taking a fixed number of data at different integration times of the A/D converter (different rates). Can you kindly tell me if there is a VI, which would do this for me or which subVI would be needed for construction of a VI that would carry out the task. Thank you and I look forward to hearing your suggestion.

    If you are measuring DC, I found the VI "Ke2000 Configure DC Volts.vi" in the instr.lib.  On the vi you can set the # of Power Line Cycles(integration time).
    To search for the instr.lib for the Keithley 2000 (if using LabVIEW 8.2), on the front panel select Tools>Instrumentation>Find Instrument Drivers.
    NI has many instrument drivers, if you search there and cant find what you need,  then I would go to the programming manual for the instrument and write my own driver.
    Brian
    Brian
    Attachments:
    KE2000.LLB ‏1192 KB

  • I looking for a transaction for debug the IDOCS

    Hello friends,
    I looking for a transaction that allowed me to debug the IDOC´s when the direction is only 1 (Outbound),  for ex. for IDOC´s has direction 2 (Inbound) I used the WE19 transaction, and to choose the "Inbound Function Module" button and I take the "Call in debug mode" checkbox,
    Can you tell me if exist another program for this?
    Thanks in advance,
    David

    Hi,
    IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc with BD87 you can have a breakpoint in the function and it will stop. For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
    For your knowledge [reference1|Re: How to debug Idoc; [reference2|Outbound IDoc debug;.
    May it helps you.
    Regards,
    DS.

  • Create fixed assets from within the transaction for creating the purchase order

    Hello All,
    I have gone through the notes on help.sap.com related to automatic creation of asset master record at the time of creating purchase order.  I am not sure how do we achieve this?
    Link to the notes on help.sap.com
    SAP Library - Asset Accounting (FI-AA)
    Any suggesstions from the expert group is appreciated.
    Thank you,
    Vinay

    Hi Vinay
    I know there is a feature whereby you assign asset classes per material group and then you create assets from within the PO. I never used it though
    Let me tell you one thing or rather ask you. Will you as a finance consultant be willing to let a MM guy create the assets??
    Or will a MM guy be willing to create it?? If you allow them, you should be ready for surprises.
    Honestly, this is a feature not worth exploring unless a FI guy is willing to create the PO. I would suggest the creation of asset masters should be with FI only
    Br. Ajay M

  • Long time for activation of integration models

    Hi Experts,
    I am getting error that I am unable to trace the actual reason from system log or the QRFC monitor (APO inbound Q)
    Refresh, unlock, reset etc does not change the status. Most LUWu2019s are executed but for some LUWu2019s are taking longer time. Once the error comes in EC panel, even if by selecting Ignore panel, the systems slows down to the greater extent or hangs.
    Am unable to paste screenshots here. But basically, the error occurs as: Execute LUW again!
    If someone has encounter the same problem & knows the solution, will appreciate the feedback on the problem.
    Thanks & rgds/
    Jay

    Jay, you might also check your qRFC settings in SMQR/SMQS.
    Here you can see the number of dialogue processors available for rfc processing. You can change the number of retries in processiing a queue with the pause between them max runtime etc.
    Make sure you don't have a daft setting in such as a very long pause.
    For comaprison this is what we have in our test system:
    SMQR
      Type Mode Max. Runtime Attempts Pause
         R    D        90         40     120
    SMQS
    Type W/o tRFC  Max.Conn.  Max. Runtime
      R           -                 10          60    
    Chris

  • VL04 transaction for creating the delivery

    Dear Guru's
    we are doing STO process for some materials from plant 1 to plant2.
    for example i have made po for 100 nos.
    if there is only 30 nos in stock then when we do VL04 system will create delivery for 30 nos.
    this process was running fine from two years but now we are facing problem that,
    when i do VL04 system is creating two deliveries.
    for example stock is 40 nos then system is creating delivery for 24 nos & 16nos.
    please help to resolve the problem.
    Regards
    prakash

    Hello,
    This is nothing because of DELIVERY SPLIT, please check the following whiich causes the delivery split
    SHIP TO PARTY
    SHIPPING DATE?DELIVERY DATE
    INCO TERMS
    DIFFERENT ROUTES
    DIFFERENT PLANTS/SHIPPING POINTS
    please check the above criterial for the deliveries which were split
    cheers,
    santosh

  • Issue with CIF Integration model for Transaction data

    Hi Gurus,
    I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
    But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
    Is there any way to avoid the following exercise as it is taking very long time for activation.
    Please guide me as it is very urgent.
    Thanks for help in advance...
    Thanks & Regards,
    Jagadeesh

    I assume 1,60,000 location products are spread around different locations.
    Rather than one Integration Model it is better to have multiple Integration Models.
    For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
    This way you reduce the number of Products in an Integration Model.
    It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
    But if you have country spefic or region specific Integration Model - only that country is affected not all.
    In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
    Hope this gives you some direction.
    Somnath

Maybe you are looking for