Transaction ie02 in LSMW

Hi,
I want to modify equipment with a LSMW and a batch input. In this transaction, I want to change the permits associated to an equipment. But I can't change them (if the fields PMSOG are free, I can add new permits, but if a permit is already associated to a field PMSOG, I can't change it). I think the problem comes from the attribute K_NODEL, which is not checked, but this attribute is dimmed and I can't check it, even in the direct transaction.
Thks for your help

DimSAP,
Why not use LSMW with BAPI BAPI_EQUI_CHANGE or BAPI_EQMT_MODIFY. I think you can solve your problem using this way.
Regards.

Similar Messages

Adding a new tab to transaction IE02/IE03

Hi
i've added a new "Z" tab to transaction IE02/IE03 and created in it a subscreen. In the subscreen i've put 2 radio buttuns with the FctCode RAD. When i switch from 1 radio buttun to the other on i get the error message "Requested function RAD is not avalible here" .
Is there any way to add radio buttun to a Z subscreen i add to a SAP transaction ? (if i dont add fctcode to the radio buttuns i dont get the error messege but i need to swith between the radio buttuns but pushing the other radio button and pressing ENTER)

Hello Mayethski
Can you please tell me if you have got a solution for this since I have approximately the same thing to implement.
Thanks in advance

Customer exit for change equipment transaction IE02

Hi
Im looking to use enhancement assignment IEQM0003, component EXIT_SAPMIEQ0_001 which is called on update of the transaction IE02 (change equipment). What Im looking to do is when any equipment is deactivated or deleted any maintenance plans associated to that equipment is either deactivated or deleted from within my customer exit. Is there any function that is available to do this deactivation/deletion of maintenance plans?
Thanks
David

Hi Everyone,
Just for your info, i managed to sort this problem by using a function called IPML_CHANGE_MPLAN_STATUS. On update of IE02 my customer exit is called and the equipment status is looked at using function ITO3_EQUIPMENT_READ_STATUS. I then look in the mpos and mpla table to see what maintenance plans are associated with this equipment. Depending on what the status of the equipment is i can then call the IPML_CHANGE_MPLAN_STATUS function to deactivate, re-activate, delete or undo the delete of any associated maintenance plans by feeding in the maintenance plan object numbers(from mpla) and the i_vorgang field which can be found in the TJ01 table INAK - Set object inactive,
                INAZ - Rest object inactive(ie make active)
                LVMS - Mark for deletion
                LVMZ - Remove deletion flag
Thanks for your help.
Dave

PM: Transaction IE02 functional location change creates new EQUZ?

Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date). There is a scenario where we do NOT want this to happen. In other words, we have an equipment, say EQ123. We want this equipment to have one history record per a cycle that might include several changes in the functional location. When the cycle is complete, then we can create a new history (EQUZ) record. That cycle might be warehouse departure to warehouse return.
Is this possible. If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
Thanks in advance,
Glen.

Glen,
I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
thanks
Bala

How to copy Transaction IE02 in PM

Hi All,
I have requirement where client want to have a copy Transaction IE02 and disable some of the tabs.
I know there are several ways but copying transaction is the only thing they want.
Please suggest how approach on this.I have tried copying it from SE80 but it is not working properly.
Can anybody please suggest the step by step procedure for the same.
Thanks in advance.

No, first look at transaction variants, SHD0 transaction (SHD followed by zero). You'll have to create a transaction variant assigned to the IE02 transaction code, and you'll create a screen variant for the screen where the tab is defined (in this screen variant, activate the checkbox "invisible" for the given tab).
Check forum and sap library for other questions.

Hi All, I developed a BDC for transaction IE02

Hi All, I developed a BDC for transaction IE02, when i am uploading data into this bdc 'validity period' is automatically taking the present system date, as in program i have not given any validations for this validity from Can anyone guide me on this as so why the data in validity from is taking present system date and how do i avoid it.
Thanks..!!!
Regards,
Swarna

Hi Swarna,
AS you mention IE02 Validity From is not editable.
If you capturing this field in BDC then you can put hard-code date value sy-datum in this field , no need to chnage in excel or manual update every time.
and If you are not capturing this field in BDC then please try to use BAPI for uploading data.
like.
BAPI_EQUI_CHANGE or
BAPI_EQMT_MODIFY.
Regards,
Prasenjit

Multiple records for a single transaction - Issue in LSMW

Hi,
i'm facing a issue in LSMW
i have the data coming up in the flat file. the data which constitutes the single transaction consists of data from multiple records from the flat file..
suppose we have 10 records in the flat file... and all the 10 records related to ony 2 transactions i.e say 6 records to first transaction and next 4 records to next transaction.
we have a direct input method to handle this data like field1 for first record, field2 for 2nd record and so on...
while uploading, we will get all the records one by one into our source structure. My question is can we handle this scenario in lsmw? if yes, pls suggest
Thanks in advance
Shekhar

Hi Kris,
this is regarding the asset creation via AS01..
we are getting the flat file in that way. Lets assume like this:
suppose for one transaction we may need to fill 5 depreciation keys and for another option only 3 dep. keys we need to fill.
then in the flat file, we can get like 5 records for first transaction i.e asset and 3 records for 2nd transaction
Can we handle this via lsmw
Regards
shekhar

Transaction Upload using LSMW

HI,
We are using LSMW with IDocs for uploading transaction data into our CRM system.The IDoc type is CRMXIF_ORDER_SAVE_M02 and the message type is CRMXIF_ORDER_SAVE_M.
The IDoc is getting created successfully with status 53(Application document posted) but the transaction is not getting created in the system.
The port being used is of type 'FILE' and the partner profile being used is of type 'US'.
Can anyone please let us know if any further settings are to be made for the transaction to get created.
Thanks and regards,
Vijaya Sai.
Message was edited by:
Vijayasai Veerubhotla

Hi Vijay,
Hope you remember me.
The Idoc that gets created, does it have any other messages? The message 53 means that the Idoc processing has called the order framework and that the Idoc mapping was successful. So there are no errors in the loading of the document but the issue is with the order application itself. Ideally the Idoc will also contain messages which give information with regards to whether the orders application successfully processed the Idoc data or not.
Cheers
Binai

Data Upload for Transaction KE51 through LSMW/BDC

Dear All,
I have a requirement where in i have to upload the customized data for Transaction KE51 and KS01 using LSMW or BDC or BAPI.
Please let me know the best possible procedure to achieve this task and how to do it. What are the validation we need to do etc.
If possible kindly send the screen shots or step by step procedure to do it.
Thanks in Advance.
Full Rewards if Usefull.
Regards
Vikas Badhan.

Hi
Actually BDC call transaction methos s very to Upload.
u sit with ur functional consulant and recording ur Tcode.Because he oly know Functionalty based on that u have write ur program.
2. LSMW recording methos also very simply...Record ur Tcode and mapping ur fields orrectely.
Regards:
Prabu

Screen Exit for transaction IE02

Hi All,
I have a requirement for making the Equipment description field mandatory in IE02 transaction as it can be deleted.
Could any one tell me if there is any screen exit or any other procedure to achieve the above requirement.
Thank you.
Regards,
Venkata Narendra

chk these user exits
IEQM0001            Add. checks for equip. installation at functional locations
IEQM0002            Additional checks for definition of equipment hierarchies
IEQM0003            Additional checks before equipment update
IEQM0004            Object is allowed for contract partner (Order->MaintCont.)
IEQM0005            Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006            Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007            Check/change manufacturer field in equipment master
or u can also try using a field exit for the field..
i think u can give a check in ur field exit for the field to be filled or pop up a message if its not. this may work out for u
Regards,
Bikash
Message was edited by: Bikash Agarwal

Including retirement transaction on asset LSMW

Hi all,
I'm using a LSMW as below to integrate asset on SAP :
BUS1022
method : CREATEINCLVALUES
All master data, takeover values are correctly recorded, but when I'm trying to record a transaction like a retirement with a transaction code equal to 200, the Idoc is working well, but nothing appears on the asset (Amount posting, Prop.***.ord.dep and Retmt. revenue)
I don't understand why it doesn't works !
I tested by creating the same asset manually through AS91 and It works !
My asset test is capitalized on 2008 and my retirement on 2009
For your information, I'm dealing with the structure E1BP1022_TRTYPE and E1BP1022_PROPVAL
Please Help !!!!
Edited by: NBEAUDET on May 4, 2009 5:48 PM

Hi all,
could you tell me if it's existing a method to record retirement on a legacy asset please ??
Maybe do you know a BAPI or Idocs through the LSMW to modify/change the asset by inserting a transaction like retirement ?
I thought to create a Batch recording, but all differents companies code aren't the same chart of depreciation, then not the same depreciation area.
... and I need to know how I could integrate the retirement on a common method ...

What is transaction IE02 - urgent

hi..
can any one please give me some informaton abt IE02
i need to work with this tcode..and i have no know ledge..
please can any one give me any link ..
thnx..

Hi
This is EQUIPMENT Change screen
Equipment master is a important master data that has to be maintained in PM module
IE01, IE02 and IE03 are create, change and display of this
see the table EQUI,EQKT and EQST for the related tables of this equipment
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Problem in creating Internal order (Transaction KO01) through LSMW

When I am processing the session of internal order creation (KO01) in background I am getting the below error.
Session FI_INT_ORD_C is being processed by user XXXXXX in mode N on server XXXXX.
It is running properly when I execute the session in foreground. Could you please help me on this?

Hello,
Check in SM37 if any background is scheduled, if you dont have authorization for the t-code ask yor basis guy to look into it.
Try to see wht that background job is doing, and if possible, if you can hault this background job and then try your job
Regards,
Abhishek

The system does not save de Functional Location with LSMW - IE02

Hi friends,
I'm using a LSMW to fill the field (TPLNR)Functional Location with the transaction IE02. But when I run the LSMW, the field is not fill in background. If I do the manual process so the field is filled.
I would like what may be occurring.
Thank you.

Hi,
It means when you recorded LSMW you filled that field but forgot to save so in recording saving is not recorded.
kindly rerecord and try.
kapil

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
                                            LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA                             *
Object Id     :                                        *
Develper Name : praveen                                *
Start Date    : 25.06.07                               *
Description   : uploading flat file to sap system      *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
        VKORG LIKE RF02D-VKORG,
        VTWEG LIKE RF02D-VTWEG,
        SPART LIKE RF02D-SPART,
        KTOKD LIKE RF02D-KTOKD,
        NAME1 LIKE KNA1-NAME1,
        SORTL LIKE KNA1-SORTL,
        ORT01 LIKE KNA1-ORT01,
        PSTLZ     LIKE KNA1-PSTLZ,
        LAND1 LIKE KNA1-LAND1,
        SPRAS LIKE KNA1-SPRAS,
        END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA:   ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA:    ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   COUNT TYPE I VALUE 1,
        S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
                 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = FILENAME
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0107'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-VKORG'
                                  IT_STR-VKORG.
    PERFORM BDC_FIELD       USING 'RF02D-VTWEG'
                                   IT_STR-VTWEG.
    PERFORM BDC_FIELD       USING 'RF02D-SPART'
                                  IT_STR-SPART.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                    IT_STR-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                IT_STR-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                    IT_STR-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                    IT_STR-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  IT_STR-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  IT_STR-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                    IT_STR-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-TXJCD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0310'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVV-BEGRU'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0324'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVP-PARVW(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*--Calling the transaction 'Vd01'.
    CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
    MESSAGES INTO MESSTAB.
    PERFORM MESSAGES.
    REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
    WRITE: /'SUCCESSFUL RECORDS'.
    format color off.
    LOOP AT ITAB1 INTO IT_STR.
      WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
              IT_STR-SPART,IT_STR-KTOKD,
              IT_STR-NAME1,IT_STR-SORTL,
              IT_STR-ORT01,
              IT_STR-PSTLZ,
              IT_STR-LAND1,
              IT_STR-SPRAS.
      S = S + 1.
    ENDLOOP.
REFRESH : ITAB1.
    WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
    WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
    LOOP AT ITAB2.
      WRITE:/ ITAB2-VKORG,
              ITAB2-VTWEG,
              ITAB2-SPART,ITAB2-KTOKD,
              ITAB2-NAME1,ITAB2-SORTL,
              ITAB2-ORT01,
              ITAB2-PSTLZ,
              ITAB2-LAND1,
              ITAB2-SPRAS.
        E = E + 1.
    ENDLOOP.
REFRESH : ITAB2.
    WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'I'.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
MESSTAB-MSGTYP = 'S'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
    MESSTAB-MSGTYP = 'E'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ENDIF.
ENDLOOP.
ENDFORM.                    " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

Transaction ie02 in LSMW

Similar Messages

Maybe you are looking for