PM: Transaction IE02 functional location change creates new EQUZ?

Everytime we execute transaction IE02 and change the functional location, it apparently creates a new EQUZ record (new valid from date). There is a scenario where we do NOT want this to happen. In other words, we have an equipment, say EQ123. We want this equipment to have one history record per a cycle that might include several changes in the functional location. When the cycle is complete, then we can create a new history (EQUZ) record. That cycle might be warehouse departure to warehouse return.
Is this possible. If so, can it be configured or done so that this only applies to a certain set of equipment (say equipment belonging to plant PXYZ)?
Thanks in advance,
Glen.

Glen,
I hope I understood your requirement clearly. Usage history is mainly maintained in the ILOA and EQUZ tables together. So when u look up a usage list, data is retrieved from these two tables together. Now, there is a provision in customization to specify which field values if changed should appear as a history update. For instance, as u said if the functional location changes it should not be logged in the history. Whereas if the equipment steps out of the warehouse or returns there should be an update to its history. The following is the path in IMG to achieve this:
SAP Customizing Implementation Guide--> Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Technical Objects --> Equipment --> Equipment Usage Period --> Define History-Related Fields
thanks
Bala

Similar Messages

What is the function code of create new session?

what is the function code of create new session?
thanks...

Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
For more Tcodes check the following
=>smartforms - Smartforms (SAP Form Builder to Create and Adjust Forms)
=>cmod - Enhancements, User Exits (Project Tool to coordinate changes into projects for the purpose of activating all user exits for a particular project)
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se24 - Class Builder (BAPI)
=>se30 - Runtime Analysis
=>se36 - LDB
=>se37 - Function Builder
=>se38 - ABAP Editor (to modify ABAP programs)
=>se39 - Split-Screen-Editor
=>se11 - ABAP Dictionary
=>se16 - Data Browser (Table contents display)
=>se41 - Menu Painter
=>se51 - Screen Painter
=>se71 - SAPScript Forms
=>se73 - SAPScript Font Maintenance
=>se75 - Graphic Objects and Graphic IDs Sapscript Settings
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se80 - Object Navigator
=>se84 - ABAP Repository Information (search for SAP objects)
=>se91 - Message Maintenance
=>se93 - Maintain T codes
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>slg1 - Evaluate Application Log
=>sm12 - Lock Entries
=>sm21 - System Logs
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>scc4 - Client Overview (Create, Quick Delete, Modify)
=>spro - Customizing, Execute Project
=>sp01 - Spool Administration
=>sq01 - Maintain SAP Queries
=>st02 - Buffer Analysis (Status Overview)
=>st03 - Workflow Analysis
=>st05 - Performance SQL trace (Tracking the Database calls from the System Transaction and Programs)
=>st22 - ABAP Dump Analysis, check logical runtime errors
=>/h - ABAP Debugger
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
=>db02 - Storage Management and Database Performance
=>db14 - Database monitor
=>se18 - BADI definitions
=>se19 - BADI implementations
=>fd03 - Accounts Receivable Master Data (Display Customer in Accounting)
=>me22 - Change Purchase Order
=>me21 - Create Purchase Order
=>me51 - Create Purchase Requisition
Official source of SAP T Codes -Go to se11 or se16 and view table entries for
TSTC and TSTCT. This will give you the Transaction List.
Reward all helpfull answers
Regards
Pavan

Is it possible in KM to change "create new file" dialog?

Is it possible in KM to change "create new file" dialog (Folder -> New -> Text File...) on consecution of my own screens(I mean user inputs information, presses next button, then again inputs information and so on)? And if its possible, could you please tell me how to do this. I'm new to KM as well as to SAP EP...

Hi Aliaksei,
the PDF referred to mainly explains how to configure commands (within layout sets etc), but as far as I understand your question, you want to develop your own screenflows / command. First, I definitely would disadvise a beginner in the EP/KM area to start with such a task...
Anyhow, there is a one-step-screenflow-command tutorial on SDN: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing flexible ui one-step-screenflow.article
For more steps, you could start decompiling a command class of a command which is more or less similar to your needs (and the underlying classes) to get further insight.
If you really should get that far and have implemented your own command, you just can switch the implementation class if you want to change the logic for an existing command under System Admin - System Config - KM - CM - UI - Commands - UI Commands - <command in question> Java Class setting.
Hope it helps
Detlev

HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION

HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION?
THANKS...

Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
Try thistoo O0
demo-like programs
RSIMC000
RSIMC001
RSIMC002
RSIMC003
RSIMCTRX
RSIMCTST
Reward all helpfull answers
Regards
Pavan

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

Extending the existing functional locations to a new plant?

Hi Sapiens,
The following is my concern:
Q1) I have a set of functional locations(roughly around 5000 records) assigned to say Plant A.
I would like to extend these existing functional locations to Plant B. I am not permitted to do this using LSMW. I should execute this operation in one shot.
How to accomplish this?
Q2) After attaching all the functional locations to Plant B, i should replace the first 4 characters of the functional location structure with the Plant Code itself. Again not through an lsmw. How to accomplish this in one shot?
Please let me know the procedure of doing it with some guidelines.
Thanks in Advance,
Vijaya

Hi
1. You can extentd to the other plant with SCAT ,BDC etc
2. But You can not replace the first four letters from the FL with the New plant code.Remember this is a master data
Regardas
Jignesh

Need to add date/time stamp to file name without time change creating new files

We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg ‏46 KB

I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi ‏29 KB

Create new business transaction for OBV3.

Dear All
In OBV3 how to create Business transactions as i want to create new
business transactions for the same.
Regards
VG

Dear All
Business transactions are system defined .
Thanks
VG

ILOM0001 - functional location description (pltxt)

Hi,
problem:
the (same) description (PLTXT) of functional location has to be saved in TWO different languages every time any change is done on a functional location AND save is (pressed) processed.
User exit ILOM0001 is already implemented and can be used for further enhancements.
Open for any suggestions.
Thanks a lot for any response.

Thanks so far.
@Dwaraka
I already thought about a direct update of the IFLOTX table. But I also learned (: NOT to access standard SAP DB-Tables directly!
The user exit ILOM0001 is used only be the one project. So no issues on that end.
@Pete
It's not causing a problem -> I have to realise the proper saving/update of the same description in two different languages every time the 'SAVE' is processed.
Users can logon in (2) different languages (international company). But in EDIT mode for the technical object (func. location) the description value has to be the same!
Did I answer all your questions?
Thank's for further replies.
Eduard
At last the problem was solved. (not that nice - but anyway)
- The functional location is created (and saved) using SAP standard BAPI's.
in the User Exit i put coding which INSERTs the same PLTXT (with respectively other language code) using SAP update function module for IFLOTX. this part runs only if transaction (sy-tcode) IL01 or a specific condition are set.
- During the process the user (always!) needs to modify some Data of the functional location. [1. SET PARAMETER ID ifl FIELD f; 2. call transaction IL02 and skip first screen]
in the User Exit there is bapi call - something like IFLOTX_UPDATE or - the existend PLTXT is copied into the Importing structure of the function module and the language is switched . The text is then modified after COMMIT WORK
It's probably not the best way - but it worked.
Edited by: Eduard Reidel on Sep 15, 2009 6:34 PM

Updating Order Functional location data for equipment

We have scenarios where we keep de-installing equipments from one FL to another . We have mapped standing orders in equipment . The FL in standing order of this equipment doesn't change automatically . We have to manually do this (rightclick---update refrence object).
Is there any way we can update order's FL directly when we change equipment's FL in equipment.
NPB

USER EXIT : IEQM0003
FM-EXIT_SAPMIEQ0_001
Transaction code=IE02
Logic
 Before equipment update (save)
1. Find value in standing order field. (EQUZ(put equipment number in EQUNR field)  get ILOAN value  put it in ILOA field and get DAUFN (standing order) )
a. If standing order value data found
i. Find functional location of the equipment (EQUZ (Table-input field EQUNR-fetch ILOAN) table (input field ILOAN to table ILOA output TPLNR) (A)
ii. Find the functional location of the order AFHI(Table)u2014(EQUNR is inut) u2013output ILOAN numberInput ILOAN in ILOA get TPLNR (B)
1. If A=B matching with that of FL of equipment being updated
a. u2013No action
b. Save equipment changes
2. If not matching A <> B
a. Save equipment
b. Update orderu2019s FL with that of equipmentu2019s FL through BDC (input order number DAUFN)
b. If standing order value not found
i. Do not take any action
ii. Save equipment changes
I can't update tables directly . I don't think any BAPI's exist to update objects in order . I can not execute a BDC from user exit . Now How to automate this ?
NPB
NPB

Aperture creating new versions unexpectedly

One of my projects in Aperture started behaving unexpectedly yesterday and I still haven't figured out why. I was reviewing proofs with a client and we were making selections and adjustments to some of the images. We were working in a smart album that was filtered on 5-star ratings. We made a few new versions of some of these images within the smart album, made adjustments, and ultimately selected her picks by adding the keyword "pick" to her selected images. In retrospect I probably will change that flow so that when I make my original selects I will rate them as a 4-star and then up it to a 5-star when the client makes their picks.
But for now, back to the problem. All was going well with the workflow until I tried to rearrange some of the images within the smart album. When I dragged the first image to a new location it created new versions of several images. I think this happened multiple times before I realized what had happened, so before I new it the album was filled with duplicate versions. I deleted the duplicate versions, but I find that they keep cropping up unexpectedly. If I go to the parent project and then return to the smart album, it makes a duplicate version of every image in the album.
A light table and a book within the project are now also giving me trouble in that they claim to have images in them, but even with all queries turned off they do not show any of the images (and yes, the "show all images" button is selected).
Any thoughts on what could be wrong?
G5 Mac OS X (10.4.3)

Mmm...I don't think this explanation tells the whole story.
Dragging an image out of the project container and into an enclosed (non-smart) album does NOT automatically generate a new version of the master image local to that album; instead, the album is populated with a new reference to the original version. Dragging that same image again out of the project container - or the first album - to yet another album generates yet another reference to the same underlying version.
Edits performed in any of these containers propagate to the images in all containers (within a particular project, of course), demonstrating that each type of container holds merely a reference to the project's single original version.
The Aperture User Manual is a bit ambiguous in its description (Chapter 5 pg 113) of the distinction between "copying" and "moving" images between projects and albums; I believe that when it refers to copying versions it's really talking about copying REFERENCES to versions between various containers.
So, long story short, I don't think moving images between the various types of containers within a single project can explain your duplicated images.
15" Alu PB 1.25GHZ G4 FW800 1GB RAM 100GB HDD Mac OS X (10.4.6) Aperture 1.1.1

RH_INSERT_INFTY not creating new records

Hi All,
I am using the FM RH_INSERT_INFTY to insert new records in HRP1000.
See the below FM call :
CALL FUNCTION 'RH_INSERT_INFTY'
     EXPORTING
         fcode               = 'INSE'
         vtask               = 'D'
          order_flg           = 'X'
          commit_flg          = 'X'
          authy               = 'X'
          PPPAR_IMP           =
          OLD_TABNR           = ' '
          REPID               = ' '
          FORM                = ' '
            keep_lupd           = keep_lupd
     TABLES
          innnn               = it_i1000
     EXCEPTIONS
          no_authorization    = 1
          error_during_insert = 2
          repid_form_initial = 3
          corr_exit           = 4
          begda_greater_endda = 5
          OTHERS              = 6.
But instead of creating new records it is changing the existing record in HRP1000.
Actually I want to create new records with different long text and short text in different languages so in case object id and object type even the dates can be same but the language would be different.
So I need to create a new records with a different language key and different short text. But this function module is changing the existing object short text,long text and language.
Could you please reply at the earliest.
Thanks & Regards,
Poonam

Hi,
you're right, this function didn't create new record when i want to create a record with same object but have different language.
you can use this function for your problem : RH_INSERT_INFTY_DIRECT
i tried and it works.
CALL FUNCTION 'RH_INSERT_INFTY_DIRECT'
EXPORTING
    vtask                     = 'V'
KEEP_LUPD                 =
tables
    innnn                     = p1000
EXCEPTIONS
   NO_AUTHORIZATION          = 1
   ERROR_DURING_INSERT       = 2
   REPID_FORM_INITIAL        = 3
   CORR_EXIT                 = 4
   BEGDA_GREATER_ENDDA       = 5
   OTHERS                    = 6
Regards,

IH01 Functional location structure list of orders

Hello experts,
Do you know how to change the variant when you want to select orders from IH01?
Example
you open IH01 and click somewher on the structure, then you click environment- orders. The system leads you to the selection screen "functional location structure list of orders" here some selection fields are already filled. Such as period and also the status of the orders has already a flag.
Do you know how to change this?
I already saved User variants --> this does not help and also a SAP_TCODE_IW39 Variant.
Do you know how to change the period of time for the selection?
Thanx
Christiane

>
R Brahmankar wrote:
> Dear,
>
> Please sent me screen shot of same.
hello brahmankar,
i have send you the email havin Subj. line "REFRESH button in Transaction IH01 (functional location structure list) ."
Awaiting for you proper response..

Functional location is not picking value from F4 help

Hi experts,
In my system for transaction IW21, functional location is not populating when using F4 help. this is only when am selecting through cost centre, for all other selection methods func. loc is populating.
could you provide me any solution soon..???

Hi,
Inorder to solve the above problem, i found that we have to apply a SAP note.
Note number: 1349197
Regards,
Soumya

Functional location to Service order

Guys
Is it possible whenever a functional location is created, through background i want to generateone service order aganist the functional location.
For this any BADI or User Exit is there ?
Ravikumar

Ravi,
Yes, I would use the PERFORM YOUR_FORM ON COMMIT syntax to ensure the functional location is created before the order is created.
If this doesn't work, then you could either use a batch program to create the service order, or use a synchronous workflow task.
Either way it will require ABAP programming
PeteA
[www.pjas.com]

PM: Transaction IE02 functional location change creates new EQUZ?

Similar Messages

Maybe you are looking for