Transaction iView issue: Table cannot support multi-cell copy and pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Hi,
How are you creating the AIP for 11.0.03. You should create AIP for 11.0 and then patch the AIP with 11.0.03 update to create AIP for 11.0.03
Do not include any other patches in between.
e.g
1. Once you have downloaded the 11.0.03 EXE and extracted to some folder, it will contain the following files, lets say "C:\extract" contains these files
ABCPY.INI
AcroRead.msi
AdbeRdrUpd11003.msp
Data1.cab
setup.exe
Setup.ini
2. Now, create AIP for 11.0.0 using the following command, Where C:\Test123 is the location where 11.0.0 AIP is getting created, so first navigate to the extracted location and then create AIP for 11.0.0
>cd C:\extract
>msiexec /a AcroRead.msi TARGETDIR="C:\Test123"
3. Now, create AIP for 11.0.03, for this first navigate to C:\Test123
>cd C:\Test123
>msiexec /a AcroRead.msi /p C:\extract\AdbeRdrUpd11003.msp TARGETDIR="C:\Test123"
Now, C:\Test123 contains 11.0.03 Reader AIP
4. Create your Transforms (if needed)
5. Apply the patch with this command, after navigating to C:\Test123
>msiexec /i AcroRead.msi REINSTALL=ALL REINSTALLMODE=vomus
This way you can install the 11.0.03 AIP on any existing AIP installations of Reader (It does not need to be a clean OS)
The above method is an underlyting GPO methodology when you upgrade package in Group Policy Editor and link the object to any OU
For more information, this may help,
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/gpo.html

Similar Messages

Transaction iView issue: Table Can't Support multi-cell copy pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Sorry it has taken so long for people to respond but this is a lot of data and it took time but basically it's a software issue what's happening is your service provider is making every attempt to contact your phone and your phone is basically not giving up any of the data like your udid or unique identifier. Their is no exact fix for this because I have only ever seen this issue 3 times and what it is best to do is connect to your computer and restore and set it up as a new phone then restore from backed up data. This is the only advice I can offer as this issue is so rare no one has one exact answer for it

SAP Transaction iView issue...Please guide...urgent

Hello All,
1. I created a SAP Transaction iView.
2. Entered all the required WAS + ITS details and the connection tests are all successful.
3. While creating the iView I selected SAP GUI for HTML as I need to display the the ITS Internet template (from Internet Service)
Query:
1. When I preview the iView, I see the GUI (standard SAP) format but not the webgui.
Please guide.
Systems - EP 7.0 SP9 & ECC 6
Awaiting reply.
Thanks and Warm Regards,
Ritu

by default the iview uses the wingui - you need to change the SAP GUI Type (GuiType) attribute of your iview from wingui to webgui.
That should solve your problem.
Haydn

ADF Editable Table : CANNOT Insert Multi Rows , Please hellppppssss

Hi All,
Our customer requirement is being able to insert Multi Rows in an Editable Table and submit ALL of them with just one Click ?
Is it Really Possible ?
I have tried, even I can insert three Empty Rows and Fill them all with values, when I press Submit ONLY one row will be submitted, the other TWO will become BLANK again, is this my code is wrong ?
Or this is limitation of ADF Editable Table ?
Here is my codes, I have tried two ways, all same problem :
(1) public String create_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("Create");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
public String myCreate_action() {
create_action();
create_action();
create_action();
return null;
(2) public String createMultiRows() {
DCBindingContainer dcbc = (DCBindingContainer)getBindings();
//get iterator binding
DCIteratorBinding ib = (DCIteratorBinding)dcbc.get("DeptView1Iterator");
// get viewobject
ViewObject vo = ib.getViewObject();
System.out.println(vo.getCurrentRowIndex());
vo.clearCache();
int currentRowIndex = vo.getRowCount() -1;
Row row1 = vo.createRow();
row1.setNewRowState(Row.STATUS_NEW);
vo.insertRowAtRangeIndex(++currentRowIndex, row1);
Row row2 = vo.createRow();
row2.setNewRowState(Row.STATUS_NEW);
vo.insertRow(row2);
Row row3 = vo.createRow();
row3.setNewRowState(Row.STATUS_NEW);
vo.insertRow(row3);
return null;
Please help... I am stuck ...
Thank you very much,
xtanto

Xtanto,
Could you try changing
bindings.getOperationBinding("Create");to
bindings.getOperationBinding("CreateInsert");in your first example to see if it fixes your problem?
Regards,
John

How can I connect my iphone to my computer with the new upgrades? My mac (old) cannot support the new itunes and my phone can't connect to it.

I have a macbook that I purchased in 2007 with operating system Mac OS X Version 10.5.8. I recently did the new software upgrade on my iPhone and now my iPhone and my computer cannot connect. I tried downloading the newest iTunes but it is not supported by my software. What can I do now? (Other than buy a new computer).

Is the new iTunes library on a different computer, or the same computer?
Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

Using the tab key in a list and keeping a table format when copying and pas

when I transfer a table from a microsoft word document or PDF file to the pages document, it does not keep the table and only the data inside the table. how do I keep the table?
Also, how do I keep the numbers from indenting when I do a list. for example, if I need to indent part of the sentence for writing specifications of something, I want to use the tab key to move away from the first part of the sentence, but it moves everything and not just my marker.

Not if it decides the list is a list, it can't.
The app never "decide that a list is alist". It does what you ask it to do.
Of course, if you refuse to disable the preference which automatically treats a paragraph as a new list entry I can't help you.
If the datas are stored as a list, the bullets are not part of the datas themselves so they will not be copied.
As I already responded the "Copy" tool doesn't copy attributes.
We have to choose:
we are using lists and the bullets can't be copied
or
we are using text arranged in columns and, if we put bullets, these bullets may be copied.
It's not me which wrote:
+In Textedit, it's very easy:+
+Tab, Bullet, First Column, Tab (or Tab x2 to get everything aligned), Second Column, etc.+
To do the same thing in Pages
Bullet, Tab, First Column, Tab (or Tab x2 to get everything aligned), Second Column, etc.
It's what was displayed in my screenshot and really I don't see what is more complicated.

Missing Result state for Transaction iView!

Hi,
I seem to have run into a strange problem - I created a SAP Transaction callable object (NOT an SAP Transaction iView from the Portal) as part of a GP. I have three steps in the GP with this transaction object being the second in the line.
When the transaction object finishes (when the user clicks Complete Step), it needs to move on to the next step - a background callable object.
The problem is that there is no result state created for the transaction object! Without the result state, I naturally cannot define the next target for execution. So the question is, where is this missing result state? Or, what do I need to do to direct the process to the next step?
Bye,
Sameer

Hi Chandan!
Yesterday I also found an SAP Note that says that the SAP Transaction CO is now deprecated and that one should use a transaction iView from the Portal.
But all this brings me to the question, how do I pass a parameter to the transaction?
It was possible through the SAP Transaction CO, but it had no result state. Now I have a transaction iView with a result state but seemingly no way to pass a parameter!
I want to use the transaction VA22 to allow the user to change a quotation. The quotation number is to passed to the iView from a WD program in the previous step. It was possible to define an input parameter in the SAP Transaction CO with the technical name of the transaction parameter. But now in the Transaction iView CO, I cannot enter the Technical name with a "-". Since the parameter is VBAK-VBELN, I don't understand how it can be done..
Could you help out here with the whole business?
Sameer

How to disable Transactional Iview for a particular user in portal

Hi Experts,
I have a scenario
i have created a user group for all the employees and assigned all the transactional roles to it, now the issue is they wanted to disable the Transactional Iview to particular user for a certain period and enable it later on, how is it possible?
As per my knowledge we have to assign that particular Role individually to all the user, instead of user group and make the iview invisible when required.
Instead of this is there any other Easy Method that i can approach the issue easily?
Thanks Inadvance
Siva

Hi Siva,
You can have two types of groups: one Group with users having access to transactional iview and another devoid of this access.
You can assign users to group with transactional role and vice versa. By the way of user groups, we will have more control over the transaction role access.
Regards,
Ganesh N

Resize the panels in a transaction iView?

Some transactions in the transaction iView have 2 panels: one on the
top and one on the bottom.
Sometimes the one on the bottom cannot be seen unless the user pull
the bottom line up.
Is there any parameter that can be adjusted to let the bottom one
show up by itself? Thanks! Points guaranteed.

Go Content Administration --> Portal Content --> Browse the Transaction iView from the tree --> Double Click on that iview --> Select from Property Category --> Appearance - Size or Select show all --> enter new value to the layout.
Also go thru this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/7d96bb087311d7b84600047582c9f7/frameset.htm
Regards,
Padmanaban

Portal Transaction iView not opening in browser but its open in R/3 screen

Hi
I have 2 senario.
First Scenario:
I login only into the portal and not login into R/3. I could access the portal transaction iview in the new broser portal window. And this is the expected behaviour.
second senario
I login into Portal as well as R/3 through SAP logon Pad (SAP GUI).
Now if I access Transaction Iview through portal , this transaction Iview is opened in R/3 side window not in portal browser window .And also same time we can see only new blank portal window iopen n portal side.
My question is that whichever transaction iView we access through portal we want to see that transaction iView in portal browser window like in first senario not in R/3 window.
Please help me to resolve this problem
Regards
Ruturaj

Hi Shanti
Thanks for replying.
The problem is that when our user trying to do same things in our system with his credentials means UID and PWD its working fine.But when he do the same things in his system with his credentials problem occured as per the senario 2.
This problem is not only that user but also whole their team member.
Regardfs
Ruturaj
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:20 AM
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:25 AM

ECC Transaction iView Error on Browser Resize

Hello.
I have created hundreds of SAP ECC Transaction iViews in the portal. After doing some testing, I realized that any time a browser window is modified when an ECC transaction iView is within display, the resize causes the transaction iView to refresh. Upon refreshing, the transaction throws error or works as if the user submitted the transaction on the backend, instead of just remaining in the same state.
For instance, if you have an SAP Transaction iView to an ECC system for tcode QM01 and it is accessible through the Detailed Navigation, this iView can be opened either in its own browser window, or within the desktop inner page. If configured to pop-up in a new browser window and you click or drag to resize the browser window, the transaction refreshes, and throws the error: "Fill in all required entry fields." This is the same error that is thrown in ECC when a user submits the transaction with no data. Similarly, if you have the iView configured to open within the portal framework and you click on the transaction it opens in the desktop inner page. If you maximize/restore down the browser window displaying the portal, the transaction refreshes within the desktop inner page and throws this same error, like it was submitted.
It happens with every ECC transaction iView that I have created, but does not happen with SRM IAC iViews, Web DynPro iViews, or SUS functionality iViews. This leads me to believe it is a problem in ITS. Does anyone know what is going wrong, or how to fix this?
Thanks for any help!
Alexa

Hi,
Super admin has permission for end user for all the iViews. So he will be able to view the iView. As mentioned, please check if the end user permission is given for the end user to access the iView. Also check if the permission is given for that particular system. To check permissions, go to System Administration -> Permissions -> Portal permissions -> Portal Content. Check for iView and system that you have created.
Regards,
Harinin S

Transactional replication issue

Hi,
i have configured transactional replication with separate distributor server, the data copied and snapshot delivered,last 2days it is running, publisher to distributor is good, but distributor to subscriber it show heavy latency and it is showing critical
status,when i see in the replication monitor, it shows undistributed commands 65000 records, when i see in snchronization status it showing 'deliverimg replication', when i compare to publisher and subscriber records difference is there, i checked the file
tranfer speed 100mbps and bandwidth speed is als good....how to fix it

Was there any issue which caused replication to stop for some time or was there any huge updates that happened at publisher..
Take a look at this link..
http://blogs.msdn.com/b/chrissk/archive/2009/05/25/transactional-replication-conversations.aspx
It explains very clearly to troubleshoot this.. You might only have to look at the distribution agent latency part, as per your description...
Apart from this, check if there are any triggers in the subscriber end which is making the subscriber updates slow..
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Transaction iView (WinGUI): "Create Session" opens blank GUI

Hi All,
we are using a SAP Transaction iView which displays the WinGUI in the portal and directly opens a SAP transaction.
The users are used to getting a new session with an already opened navigation tree (SMEN) by clicking "System --> Create Session". However, if the WinGUI is opened in the portal via a Transaction iView, "System --> Create Session" opens a blank GUI session where the users have to manually execute "SMEN" to get to the tree.
Is there any way to get the usual "Create Session" behavior as if the WinGUI were launched outside the portal and the transaction were entered manually?
Thanks,
Jens

Hi,
first of all: Apologies... I had found another thread before which described the procedure you were hinting at (manipulating the PAR file) and I even had already downloaded the file from the PCD. But the user in the thread I found described another problem (the menu entry "Create Session" was missing altogether) so I thought this wouldn't solve my problem since we weren't missing this menu entry.
But you are right: I changed the parameters, deployed the PAR and restarted the portal - the problem is solved! New sessions now automatically show SMEN.
Thanks a lot!
Jens

How do I copy and paste only the text from a cell?

Hi -
Every time I want to move text to a different cell, copy and paste copies all styles as well. How do I just copy and paste the text while leaving the style of the receiving cell in tact?
Thanks.
Chris

Christopher. If the alternating row color is the obstacle, I suggest selecting the table, then setting the background color to white, then check the "Alternating Row Color" check box in the Table Formatter:
Now sorting will not affect row color

DM 4.5, software issues message "Cannot find system in table file"

Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684

Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Transaction iView issue: Table cannot support multi-cell copy and pase

Similar Messages

Maybe you are looking for