Transaction iView issue: Table Can't Support multi-cell copy pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Sorry it has taken so long for people to respond but this is a lot of data and it took time but basically it's a software issue what's happening is your service provider is making every attempt to contact your phone and your phone is basically not giving up any of the data like your udid or unique identifier. Their is no exact fix for this because I have only ever seen this issue 3 times and what it is best to do is connect to your computer and restore and set it up as a new phone then restore from backed up data. This is the only advice I can offer as this issue is so rare no one has one exact answer for it

Similar Messages

Transaction iView issue: Table cannot support multi-cell copy and pase

Hey guys:
I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
Anyone can help me figure this out?
I hope this is configuration problem but WebGUI doesn't support this operation.
Looking forward your help! Please leave your suggestion. Thanks!

Hi,
How are you creating the AIP for 11.0.03. You should create AIP for 11.0 and then patch the AIP with 11.0.03 update to create AIP for 11.0.03
Do not include any other patches in between.
e.g
1. Once you have downloaded the 11.0.03 EXE and extracted to some folder, it will contain the following files, lets say "C:\extract" contains these files
ABCPY.INI
AcroRead.msi
AdbeRdrUpd11003.msp
Data1.cab
setup.exe
Setup.ini
2. Now, create AIP for 11.0.0 using the following command, Where C:\Test123 is the location where 11.0.0 AIP is getting created, so first navigate to the extracted location and then create AIP for 11.0.0
>cd C:\extract
>msiexec /a AcroRead.msi TARGETDIR="C:\Test123"
3. Now, create AIP for 11.0.03, for this first navigate to C:\Test123
>cd C:\Test123
>msiexec /a AcroRead.msi /p C:\extract\AdbeRdrUpd11003.msp TARGETDIR="C:\Test123"
Now, C:\Test123 contains 11.0.03 Reader AIP
4. Create your Transforms (if needed)
5. Apply the patch with this command, after navigating to C:\Test123
>msiexec /i AcroRead.msi REINSTALL=ALL REINSTALLMODE=vomus
This way you can install the 11.0.03 AIP on any existing AIP installations of Reader (It does not need to be a clean OS)
The above method is an underlyting GPO methodology when you upgrade package in Group Policy Editor and link the object to any OU
For more information, this may help,
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/gpo.html

Transaction IView (some files can harm computer...

When executing a transaction iview, a IE window pops up with the warning "Some files can harm your computer. If the info...". How can I get rid of it? If I click on the open button, the sasp gui loads up fine.
Thanks
Raj

hi Prakash,
My problem is almost the same, but I am adding a page to portal favorites (ex: overview page of accounts workset in crm business package) and when i am clicking on that link in portal favorites, it is opening the same message that raj balakrishnan was saying, However even if i click on OK, it again opens a "windows cannot open this file" dialog asking for whether to use webservice to find apporpriate progaram or select from list (where i selected IE).
could you please let me know why is it so?
Thank you

SAP Transaction iView issue...Please guide...urgent

Hello All,
1. I created a SAP Transaction iView.
2. Entered all the required WAS + ITS details and the connection tests are all successful.
3. While creating the iView I selected SAP GUI for HTML as I need to display the the ITS Internet template (from Internet Service)
Query:
1. When I preview the iView, I see the GUI (standard SAP) format but not the webgui.
Please guide.
Systems - EP 7.0 SP9 & ECC 6
Awaiting reply.
Thanks and Warm Regards,
Ritu

by default the iview uses the wingui - you need to change the SAP GUI Type (GuiType) attribute of your iview from wingui to webgui.
That should solve your problem.
Haydn

JSTL fmt:setLocale can't support multi setLocale in a jsp?

hi:
a jsp has follow code:
<fmt:setLocale value="iso-8859-1"/>
<fmt:setBundle basename="Directory"/>
<fmt:message key="name"/>
<fmt:setLocale value="gbk"/>
<fmt:setBundle basename="Directory"/>
<%--change <fmt:setBundle basename="Directory_zh"/> no effect --%>
<%--here in theory,the java.util.ResourceBundle must recall with new Locale --%>
<fmt:message key="name"/>
TOmcat 5.0.16/jdk1.4.2
Always display iso-8859-1 (Directory.properties) directory.
how to display multi language in a jsp?
thanks

Directory_zh.properties exists? In the same physical location as Directory.properties? Directory_zh.properties contains the key 'name'?

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

Issue regarding refreshing transaction iview

Hi gurus,
the issue is,
end user has transaction iview and url iview ,
transaction iview is created using GUI for windows, so that he/she can enter any transaction.
SESSION_MANAGER is the tcode assignd to enduser in transaction iview,
the problem is ,if user is using SE38 and then he click on url iview tab in top level navigation and click on transaction iview tab or refreshes the page then the transaction in transaction iview comming back to SESSION_MANAGER.
client need same transaction to be displayed even after refreshing page or navigationg to other tab.
Regards
K Naveen Kishore.

Hi Naveen,
If you switch navigate to another iview and then back to your transaction iview, or refresh the portal page, you restart the iview with all its initial settings - including transaction. It seems you want to somehow suspend the state of the interaction with the SAPGUI, even between openings in the portal window. That's not possible.
What you could do is set the SAPGUI to open in a new window (this is always the case if you use the SAP Shortcut File starting technique) - then the user interacts with this window for all his transaction-based work and uses the original window for portal activities. Alternatively create a role structure that includes all the transactions of interest to the particular user group, and have them switch between transactions in this way rather than by entering commands in the SAPGUI command field.
Regards, Rory

Data in table control not seen for the Standard Transaction Iview

Hi
I am creating one Standard Transaction Iview for CATS .
While doing print preview in IE 6 , I am not able to see data in Table control(Data Entry Area ).
Can you please provide me the solution for how I can see the data in Table Control
Regards
Ruturaj

Hi David,
I too struggled a lot to find the solution ....atlast got it....It possible by exporting and importing the table control values to Database Index.
1. AT SELECTION SCREEN OUTPUT event triggers when you SAVE and GET the variant.
2. So write the logic in AT SELECTION-SCREEN OUTPUT event.
CONSTANTS: c_vari TYPE char30 VALUE
                         '(SAPLSVAR)RSVAR-VARIANT'.
FIELD-SYMBOLS: <lfs_vari> TYPE ANY.
ASSIGN: (c_vari) TO <lfs_vari>.
IF sy-subrc = 0.
    IF <lfs_vari> IS NOT INITIAL.
      IF ok_code = 'SPOS'.
        EXPORT gt_chars[] TO DATABASE vari(tc) ID <lfs_vari>.
      ELSEIF ok_code = space.
        IMPORT gt_chars[] FROM DATABASE vari(tc) ID <lfs_vari>.
      ENDIF.
    ENDIF.
ENDIF.
In the above logic if OK_CODE is 'SPOS', that is for saving the variant with the name <lfs_vari>.
Similarly if the OK_CODE is other than, 'GET'....that is for retrieving the variant. But in case of getting the variant OK_CODE is not filled with 'GET', but variant will be filled. We should take variant filling as base and do as done above.
It worked for me.....

Can esb DVM(Domain-value mapping ) support multi-language ?

I create a dvm , and add some rows in Chinese , but when I restart the soa service , all the DVM that I created disappeared.
Can esb DVM(Domain-value mapping ) support multi-language ?
Edited by: user10732687 on 2009-8-23 下午7:39

DVM is designed to use in English only and not intended to support Multi language. It is the job of consumer application to convert from English to native language(Chinese in your case).
Thanks,
Vamsee.

Oracle can not support upto 32 characters table name and field name ?

hi
oracle up limitation ?
create table aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa(a char);
Error
ORA-00972:identifier too long
or
create table a (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa char);
Error
ORA-00972:identifier too long
Oracle can not support upto 32 characters table name and field name ?
It is true?
null

Hello All
It's been a year after those posts about the limit of identifiers in Oracle Database. Does anybody know what can be done to get rid of that primitive limit? We are developing using Application Servers, Java, generated Code and a very nice object model, in which we can't just use abreviations because of early database age memory shortcomings.
We are currently using 8i in a very large organization. Is there any chance this version can be configured to allow larger identifiers? Is upgrading to 9i going to solve this problem? Is Oracle Databases really doomed forever because of a 20-year-ago limitation?
Please, I do like Oracle Databases. I don't want to be flooded with quick answers like "just use 32 character identifiers". I would like to hear a serious solution. Is anybody there still locked in the 8.3 filename paradigm of MS/PC-DOS? Does anybody has to fit an entire Enterprise System in segmented 640Kb of memory? Does anybody has to use monochrome character mode interfaces? Of course not those in the mainstream.
I also know that other hadrware and software products have lots os limitations. Take Windows 2000. Its command line has a limit of 255 characters! You can't have more than 4GB of memory in a PC! However, one can't expect one mistake to justify others.
I wish I were very wrong in this respect, and all it should be necessary is to turn on some kind of configuration parameter in 8i to allow us to develop high quality code.
Thanks for your attention.
Please, feel free to contact me if you have a solution.
[email protected]

TS1702 PinUploader App installation stalls on iPad2 so I can't open it or delete it. Error message is "fixed login (forbidden) issue! iPhone 5 support!

How do I delete an App that is stalled in installing mode? I can't open it or delete it. Message reads, "fixed login (forbidden) issue! iPhone 5 support! Please advise.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Maximum Number of Columns that adf table can support in JDeveloper 10.1.3.1

Hi All,
I'm using Toplink 10.1.3.1 . In JDeveloper 10.1.3.1 .
I'm Trying to display the columns of a table which is having the more than 380 columns.
When I'm trying to display the columns in adf table, it is getting hanged. The console of the displaying that "too long".
If Execute the Application with nearly 50 columns, It is working fine.
what is the Maximum number of columns that adf table can support. Is there any other solution for my problem.
could anyone help me out.
Thanks in advance,
regards,
Satish

Hi,
I am not sure there exist a limitation in columns and if the application hangs then this probably is a bug either in the business service or the view (which can also be due to that the server runs out of memory because of the created object instances).
However, in my opinion a table with 380 columns is a loud cry for denormalization
Frank

Where we can set the Multi lingual support in BW system and Info Object?

Where we can set the Multi lingual support in BW system and Info Object?

Hi,
You can check that in RSD1 -> Info-object -> Master Data text tab -> language dependent or not.
Bye
Dinesh

HT2693 when i purchase items in a game, it said "please contact itunes support to complete this transaction" and then i can do nothing

i am playing the game Clash of Clans. And when i want to buy some Gems, the game said that please contact itunes support to complete this transaction. So i can not find any help on support website. can you help me? Thank you

You can contact iTunes support via this page (it may take up to 48 hours for a reply from them) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

When I want to buy gems for clash of clans it says cannot complete transaction and to contact apple/iTunes support. Can you help me

When I want to buy gems for clash of clans it says cannot complete transaction and to contact apple/iTunes support. Can you help me

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Transaction iView issue: Table Can't Support multi-cell copy pase

Similar Messages

Maybe you are looking for