Transaction related to PLAF EBAN EKET

Hi all,
Can anybody tell me what are the transactions related to the above mentioned table through which we can update or create a new entry .
Thanks and Regards.
syed

Hai,
Transactions Related to PLAF :
MD11 - Create Planned Order
MD12 - Change Planned Order
MD13 - Display Planned Order
Transactions Related to EBAN :
ME51 - Create Purchase Requisition
ME52 - Change Purchase Requisition
ME53 - Display Purchase Requisition
ME54 - Release Purchase Requisition
Transactions Related to EKET :
ME31 - Create Outline Agreement
ME31K - Create Contract
ME31L - Create Scheduling Agreement
ME32 - Change Outline Agreement
ME32K - Change Contract
ME32L - Change Scheduling Agreement
ME33 - Display Outline Agreement
ME33K - Display Contract
ME33L - Display Scheduling Agreement
ME34 - Maintain Outl. Agreement Supplement
ME34K - Maintain Contract Supplement
ME34L - Maintain Sched. Agreement Supplement
ME35 - Release Outline Agreement
ME35K - Release Contract
ME35L - Release Scheduling Agreement
Regards,
Padmam.

Similar Messages

Transactions Related to XI Available ECC 6.0

Hi Experts,
Could you list out transactions related to XI available in ECC 6.0 version.
Thanks in Advance.
Regards,
IFF

Hi;
See this;
ABAP transactions
SE38 ABAP Editor
SE11 ABAP Dictionary
ST22 ABAP dump analysis
SPROXY ABAP Proxy Generation
SE80 Object Navigator
ABAPDOCU ABAP Documentation and Examples
SE37 ABAP Function Modules
SE24 Class Builder
Administrative transactions
SM21 Online System Log Analysis
SMQ1 qRFC Monitor (Outbound Queue)
SMQ2 qRFC Monitor (Inbound Queue)
RZ70 SLD Administration
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
SMICM ICM Monitor
IDoc transactions
WE60 Documentation for IDoc types
BD87 Status Monitor for ALE Messages
IDX1 Port Maintenance in IDoc Adapter
IDX2 Meta Data Overview in IDoc Adapter
Mudit
Award points if it helps

Relation between PLAF and MSEG

Hi
Can anyone provide me with a relation between PLAF and MSEG table
Thanks
VRV

HI VRV,
I don't know if you have already got the response to your query. But for your requirement, i believe you should be looking at PLAF & tables like AFKO, AFPO, AFRU.
AFKO is order header, AFPO for the order details & AFRU for the confirmations.
From the PLAF you can get planned order details, from the others you can get the order & qty which has been converted to production order, the qty which has been confirmed.
Have a look at these tables & if you need any further inputs, message back & will try my best to be of some help.
Regards,
Vivek

Query to get AR Transactions related Toptask

Hello Guru's,
Please help me to get AR transactions related particular TopTask.
ThankQ

Hi Jagadekara,
Thanks for your response.
Sorry that i didn't give my complete requirement.
I want to even get invoice line item and their receipt information.
·         Columns to Display on the report–
a)      transaction number(invoice number)
b)      receipt number (if partial receipt is applied)
c)       Item number
d)      Item description
e)      Transaction amount
f)       Receipt amount
g)      Customer name
h)      Customer bill to site name
i)        Customer bill to site number
Can you please provide according to this?
Thanks.

MIRO transaction related

Hi Experts,
How can i capture multiple vendors for a particular purchase order in transaction MIRO through BADI Invoice_update.There can be a situatin where a particular purchase order can be linked to multiple vendors ( due to change in address), if the scenario exits i want to throw a pop up message that multiple vendors exit for this purchase order and when the user goes to post this MIRO,and the related vendors should be available under F4 help in invoice party ,how can i do this with this BADI.
Regards
Prasun

this is answered

Transaction related to AMPL list

What are the related standard transaction codes and details for AMPL list - Approved manufacturer part list.

The Following are the Standard Trxn codes for AMPL Lists.
MP01                 Maintain AMPL Records
MP02                 Display AMPL Records
MPAD                 Delete archived materials from AMPL
Regards,
Ashok

WebLogic and Transaction related exception

We deploy our application on Web logic 8.1 and used SQL Server 2000 as database.
we received the following error: (never received this any time in the past for 3 yrs)
JTS.Site.DB_Name, HeuristicHazard, (javax.transaction.xa.XAException: [TDS Driver]The connection is closed)) !
Here is more information from Web Logic Log.
<ExecuteThread: '8' for queue: 'ServletQueue'> <<anonymous>> <BEA1-075FCECB75B815E20364> <BEA-110412> <Xid=BEA1-075FCECB75B815E20364(187704364),Status=Committed,HeuristicErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=120,activeThread=Thread[ExecuteThread: '8' for queue: 'ServletQueue',5,Thread Group for Queue: 'ServletQueue'],XAServerResourceInfo[JTS.SITE.JNDI_Name]=(ServerResourceInfo[JTS.SITE.JNDI_Name]=(state=committed,assigned=PAS Name),xar=JTS.SITE.JNDI_Name])........
Any help or advice in this regard will be appreciated....Thanks.

Dear readers,
Found the cause: somewhere OpenJPA threw an exception which caused the transaction to roll back.
The exception was caught locally hiding the rollback.
cheers
Marc

How to know if transactions in AP has been posted to GL

This may be a stupid question but this is the issue.
The client said they had posted entries from AP to GL for a particular account.
1.How to verify that the transactions related to that particular account has been duly transferred to GL?
Can I use the account inquiry in GL to see if the transactions have been posted or not? or any other tools?
Will the AP trial balance report give me all the transactions with has been posted?
2.If the client has created accounting but the transaction is not transferred to GL. How to resolve this issue?
Thanks for the kind reply

Hi,
For posting confirmation... view accounting of that invoice... click on "View Journal Entry" button... than expand any entry item by clicking Plus sign... than copy Journal entry name.... and goto General entry superuser-->Journal--> Entry--> find that Copied journal .. the POSTING status will be shown.
Regards:
Shahzad M. Saleem(Mark it as helpful if it does)

Difference between Transaction Figures and Line Items

Hi,
I gone through FI like FI-GL,FI-AR,FI-AP..there i find...
Line Items & Transaction figures as main...like
in FI we have
Line Items - 0FI_GL_4,0FI_AR_4,0FI_AP_4 etc...
Transaction Figures - 0FI_GL_6,0FI_AR_6,0FI_AP_6 etc...
Now Can some please explain...
what exactly Line Items are?
What exactly Transaction Figures are?
How data flows from end to end in FI? i.e where exactly GL,AR,AP comes into picture..how they are internally related?
Some one please explain me in detail (with expamles if possible) and quick reply is much appreciated...
Regards
Ramsunder

Hi
What exactly line items :
Line items are document items that were posted to a specific account. In contrast to a document item a line item only contains the information from the document that is relevant from the account view.
You can display the following line items:
Open items, Cleared items, Noted items, Parked items ,Items with special G/L transactions (in Accounts Receivable and Accounts Payable),Items with customer or vendor items (in Accounts Receivable and Accounts Payable)
You can display the line items for the following account types: Customer accounts,Vendor accounts,G/L accounts.
What exactly Transaction Figures are?
Transaction figures are the sums of line items on the debit or credit side. The balance is the difference between the debit and the credit transaction figure.
If you take General ledger
AP records all accounting transactions for dealings with suppliers(Vendors). Much of its data is obtained from procurement (Materials Management).
AR records all accounting transactions for dealings with customers. Much of its data is obtained from Sales and Distribution.
Asset Accounting records all accounting transactions relating to the management of assets.
Travel Management manages and calculates travel costs and supports travel planning and travel expenses.
Bank ledger supports the posting of cash flows.
Regards
Chandra Sekhar T

BPI1 Exercise 96 error - conflict in transaction event code?

Hi all. I'm Dave Russell, a new poster
I just attended BPI1 at Chico and am going through the entire set of exercises one more time. I'm in a bit of a rush since the server assigned to it, LOKE, is going down soon.
Gee, I hope I'm in the right place and if I am not would someone direct me to the correct forum?
OK, here's the issue. I have been sailing through the BPI1 book until I got to Exercise 96 -- Configure Automatic Postings for Goods Movement. Here you are setting automatic postings to two valuation classes for certain types of transactions related to good movement.
The first involved BS (Inventory Posting). For the valuation group set in Exercise 94, you are associating the Trading Goods account 721___ with Valuation class 3100 and the Operating Supplies account 740___ with class 3030. No problems here.
The next step repeats for GBB (Offsetting entry for Inventory Posting). It does much the same thin but adds in the Cost of Goods sold account (900___). But when you save, the following error is generated:
Account 740106 already used in transaction BS
The diagnostic for this states that "Accounts used in transaction BS (posting to asset balance sheet account) cannot be used in any other account determination.". I have a screen print if that would help.
It is clear what the error is, but not the solution. II know I did not encounter it in Chico, so I am probably doing something notably dumb. Can anyone help me get past this? I really can't use work-arounds since my students will be using the same text (now being updated by Tom Wilder).
Thanks, Dave Russell

If it is any comfort to anyone with a similar problem, the problem related to the Create/bank/interest tab in the creation of the accounts in Exercises 41 through 57. It is really important the the "Post Automatically Only" be selected or deselected as specified. By a quite circuitous route, I discovered this myself.

ERROR DURING T.CODE F-53 ( cross company transaction error)

Hello ,
I am clearing two documents , in which one is cross company code transaction and another is vendorinvoice through t.code f-53.
while saving the document I am gettting the following error.
Consolidated companies 1000 and ' ' are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
kindly help me to solve this issue
thanks and Regards,
muscan

Hi,
Please check if in the control data of the vendor master "Trading Partner" is populated.
If yes, then if you remove the trading partner then you might not get this error.
If a trading partner is there, the system check the document type for Intercompany posting control and if its not there then the system gives such an error.
Changing a document type might impact all the business transactions relating to the document type that you are using.
However this might not be required in your scenario.
Thanks,
Nitish

Transactions Not Showing up in Console

We recently deployed new functionality in our WLS 6.1 based application. The new
functionality consists of MDB's and a Stateless Session Bean which the MDB's invoke.
The MDB's are
packaged in a separate jar file from the SSB, which is packaged in another jar
file
that houses all of our SSB's. The MDB's are transactional.
One peculiar issue we have noticed is that in the WLS Console, we do not "see"
any
transactions related to these new MDB's or the new SSB (Servers->OurServer->Monitoring
Tab->JTA Tab).
If you click on "Monitor all Transactions by Name" we are expecting to see an
entry
for each MDB's onMessage() method, in addition to any method's invoked on the
new Stateless Session Bean.
All of our other Stateless Session Bean methods are show in the "Monitor all Transactions
by Name" View.
Any insight as to why these MDB's and SSB are not showing up in this view? Are
we misconfigured in anyway?
Please let me know if you need further information, as I would gladly provide
it.
Thanks,
Al

I hope this is the last one on this topic!
With a one line script I can use the consul easily but lets say I have something really complicated like the script below. Other than fitting it on one line how can I run it from the console?
for (var i = 0; i < 10; i++) {
console.println(i);
Ctrl Enter after the } throws the following error
SyntaxError: syntax error
1:Console:Exec
undefined
Sorry for asking such pathetically basic questions

How to disable a field in a standard transaction

Good day,
Can any one tell me , with an example of , how to disable (the field should not allow any input ) a parameter or a select option in a standard transaction.

Probably the only way to achieve this is by creating transaction variants:
In the SAP Reference IMG, you can create transaction variants. Choose Basis Components ® Application Personalization ® Tailoring of Application Transactions ® Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
Steps :-
Transaction SHD0 - Create a variant for the required transaction bychanging the layout through hiding fields and screens.
Transaction SE93 - Create a variant transaction (e.g. for VA02 you canname it as ZA02). Next allocate the transaction variant to this varianttransaction.

CRM Table for Transactional data

Hi experts,
I m looking for a Table in CRM where i'll get all the transaction related data(i.e.All partners, products, status, process types etc) like we have FM CRM_ORDER_READ from this we can get all the tranaction related data.
Thanks to you !!!!
Vivian

Vivan,
The answers above are correct, CRM does not store all the data in one table like ERP. As far as the factsheet the data is stored across several different areas. So you need to tell us what part of the factsheet data you are looking for and you might get an answer.
In the future please do a search before asking, or make sure your question is more detailed as your original question was too broad for anyone to provide a reasonable answer.
Thank you,
Stephen

Population of custom LIS tables thorugh MFBF transaction

Hello Friends,
I have created a custom LIS tables S728 for Shop floor control (04) and it is updated though REM Backflush (transaction MFBF). But some of the fields are not populated. Can someone help me to understand how this LIS table is populated? I am looking for piece of code where this table is populated.
I see some includes inside main program for MFBF transaction related to LIS structures, but control does not stop there in while debugging MFBF Tran code.
Any direction/suggestion will help.
Thanks.
Sujoy

I added the following code at the beginning of the user exit and was able to prevent the execution of user exit for S031, S032 and S033 during reload of old material documents using OLI1 or OLI2.
DATA: lv_ex_flg TYPE c.
DATA: lfd_string TYPE string VALUE '(SAPLMCB1)XMCINF[]'.
FIELD-SYMBOLS : <fs1> type any,
 <fs2> type any,
 <fs> TYPE table,
 <fs_wa> TYPE any.
IF sy-tcode EQ 'OLI1' OR sy-tcode EQ 'OLI2'.
ASSIGN (lfd_string) TO <fs>.
IF sy-subrc EQ 0.
LOOP AT <fs> ASSIGNING <fs_wa>.
 ASSIGN COMPONENT 'LOW' OF STRUCTURE <fs_wa> TO <fs1>.
 ASSIGN COMPONENT 'HIGH' OF STRUCTURE <fs_wa> TO <fs2>.
 IF <fs1> EQ 'S031' OR
 <fs1> EQ 'S032' OR
 <fs1> EQ 'S033'.
 lv_ex_flg = '1'.
 EXIT.
 ELSEIF <fs2> EQ 'S031' OR
 <fs2> EQ 'S032' OR
 <fs2> EQ 'S033'.
 lv_ex_flg = '1'.
 EXIT.
 ELSEIF <fs2> EQ 'S920' OR
 <fs1> EQ 'S920'.
 EXIT.
 ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
CHECK lv_ex_flg NE '1'.

Transaction related to PLAF EBAN EKET

Similar Messages

Maybe you are looking for