Transfer class and characteristics data from 3.1i system to ECC 6.0 system

I have to develop a program to transfer all the classes and characteristics( tcode cl01 and ct04)  in a 3.1i system to an ECC 6.0 system.
I initially planned to use FMs BAPI_CLASS_GETDETAIL to read from 3.1i and BAPI_CLASS_CREATE to load in ECC 6.0.
But then I realized that BAPI_CLASS_GETDETAIL does not exist in 3.1i system.
Could anyone please tell me how to transfer the class and characteristics data from 3.1i to ECC 6.0. What approach and FMs are to be used.
Thanks,
Karthik

Thanks for the reply Madhu.
We are trying the ALE way, using BD91 and BD92. This way seems to be easier as there is no need to extract data to files.
IDoc is successfuly sent from the 3.1i system but we are not able to see it in ECC 6.0 system.
We are checking up the settings.
Would be very useful if you can provide some more details about the settings to be done.
Thanks,
Karthik

Similar Messages

  • I have a PPC iMac 10.4.11 and will shortly buy a new i Mac.  What is the best way to transfer all my HD date from old to new? Thank you!

    I have a PPC iMac 10.4.11 and will shortly buy a new i Mac.  What is the best way to transfer all my HD date from old to new? Thank you!

    Migrating from PPC Macs to Intel Macs:
    https://discussions.apple.com/docs/DOC-2295
    How to use Migration Assistant:
    http://support.apple.com/kb/HT4413?viewlocale=en_US
    http://support.apple.com/kb/TS1963
    Troubleshooting Firewire target disk mode:
    http://support.apple.com/kb/HT1661

  • I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

    I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable.  I was confused about consolidating my accounts, so I continued to use my old MacBook.  Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively?  How do I consolidate my existing accounts?
    Thank you.

    Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

  • Am unable to transfer/sync my "Notes" data from iPhone 6 to my MacAir and MacMini PC. Just doesn't work. Please advise.

    Am unable to transfer/sync my "Notes" data from iPhone 6 to my MacAir and MacMini PC. Just doesn't work. Please advise.
    regards / krishnakumar
    Cochin/India

    There may be other ways, but the best way I've found is:
    Set up an iCloud email account so that you can use the Notes part of this service.  Note that I said "iCloud email" not "iCloud" ... you need to enable the email service of iCloud in order to get the iCloud Notes feature.  Otherwise, the "Notes" app on your device will only store notes on your device, or maybe sync them with some other email account (e.g. Gmail, Yahoo ... but does so poorly IMO).
    On your Macs, set up the same iCloud account as on your iPhone.  Now that you've set up the email part of iCloud, you can enable the Notes feature of iCloud on your Macs.
    Be sure to set iCloud as the default account to store your notes, in case you have other email services with a Notes feature.
    New notes that you create on any device will sync to each other.
    Notes that you created before doing all this cannot sync to your Macs, since the notes were not in iCloud.  Just turning on iCloud Notes does not cause them to enter iCloud and sync -- you'd have to copy and paste them into a new note, after ensuring that iCloud is the default account for any new notes.

  • How to transfer a set of data from Excel spread sheet to an Access database

    hi,
    Can any one please tell me how to transfer a set of data from Excel spread sheet to an Access database using SQL query.I'm using java API currently. I have done all sorts of ODBC connection in administrative tools.The file is in correct location. I have done certain coding but with errors.Help me to get rid of these errors,
    Coding:*
    try
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection datacon=DriverManager.getConnection("jdbc:odbc:exdata","",""); *//For Excel driver*
    Connection datacon1=DriverManager.getConnection("jdbc:odbc:stock1","",""); *// For mdb driver*
    Statement datast=datacon.createStatement();
    Statement datast1=datacon1.createStatement();
    ResultSet excelrs=datast.executeQuery("select item_code,sdata,closing_stock from phy "); *//phy is the excel file*
    while(excelrs.next())
    String ic=excelrs.getString("item_code");
    System.out.println(ic);
    String d=excelrs.getString("sdate");
    double cs=excelrs.getDouble("closing_stock");
    int dbrs=datast1.executeUpdate("insert into second values('"+ic+"','"+d+"',"+cs+")"); *//second is the mdb*
    excelrs.close();
    }catch(Exception e)
    System.out.println(e);
    Error:*
    java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'C:\JavaGreen\phy.xls'. Make sure the object exists and that you spell its name and the path name correctly.
    thanks,
    kumar.

    JAVA_GREEN wrote:
    No i haven't mixed up.But the file from where i have to retrieve the data is in csv format.Even though i created another csv driver.and tried but i cud not find a solution to load/transfer a set of records from one file(in Excel/csv format) to another file(in mdb format).plz help me.Is there any other methods for this data transfer.A csv file is NOT an excel file.
    The fact that Excel can import a csv file doesn't make it an excel file.
    If you have a csv file then you must use a csv driver or just use other code (not jdbc) to access it. There is, normally, a ODBC (nothing to do with java) text driver that can do that.

  • Customizing FD01 and FB70 using PS Class and Characteristics

    Hello SAP Experts
    I have the following issue:
    My client has a requirement where we need to customize the Customer Master  (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
    Please kindly give your suggestions. Thanks in advance
    Regards,
    Nik

    Joao Paulo,
    Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
    Nik

  • How to use ale/idocs in sap crm to transfer master and transactional data

    hi all,
    I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
    pls help..
    regards,
    kavita chaudhary

    Kavita,
    In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
    Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
    You can extend the standard XIF IDOCs using Transaction BDFg as well.
    Thanks,
    Ravi

  • How to Create an R/3 source system and load data from there

    Hello All,
    Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
    Does anyone has detailed steps for that. I am using BW 3.5 system
    Thanks n Regards,
    Abhishek

    1. Type Transaction WE30. Check iDoc types
    2. Type Transaction SM59. Maintain RFC destinations
    a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
    3. Type Transaction WE21. iDoc Processing Ports.
    a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
    4. Type Transaction SE16. Data browser (for R/3  BW Connections)
    5. Type Transaction SM30. Msg Types & Assignment to iDocs
    Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
    6. Go to the SM30 main screen. Clients Overview
    Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
    8. On BW Type Transaction WE20. Partner Profiles
    9. On R/3 Type Transaction WE20. Partner Profiles
    10. Check all is correct

  • Customizing FD01 and FB70 using SAP PS Class and Characteristics

    Hello SAP Experts
    I have the following issue:
    My client has a requirement where we need to customize the Customer Master  (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS characteristics. Your opinions would be much appreciated.
    Please kindly chip in your ideas
    Regards,
    Nik

    Joao Paulo,
    Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
    Nik

  • How can we transfer huge amount of data from database server to xml format

    hi guru
    how can we transfer huge amount of data from database server to xml format.
    regards
    subhasis.

    Create ABAP coding
    At first we create the internal table TYPES and DATA definition, we want to fill with the XML data. I have declared the table "it_airplus" like the structure from XML file definition for a better overview, because it is a long XML Definition (see the XSD file in the sample ZIP container by airplus.com)
    *the declaration
    TYPES: BEGIN OF t_sum_vat_sum,
              a_rate(5),
              net_value(15),
              vat_value(15),
             END OF t_sum_vat_sum.
    TYPES: BEGIN OF t_sum_total_sale,
            a_currency(3),
            net_total(15),
            vat_total(15),
            vat_sum TYPE REF TO t_sum_vat_sum,
           END OF t_sum_total_sale.
    TYPES: BEGIN OF t_sum_total_bill,
            net_total(15),
            vat_total(15),
            vat_sum TYPE t_sum_vat_sum,
            add_ins_val(15),
            total_bill_amount(15),
           END OF t_sum_total_bill.TYPES: BEGIN OF t_ap_summary,
            a_num_inv_det(5),
            total_sale_values TYPE t_sum_total_sale,
            total_bill_values TYPE t_sum_total_bill,
           END OF t_ap_summary.TYPES: BEGIN OF t_ap,
            head    TYPE t_ap_head,
            details TYPE t_ap_details,
            summary TYPE t_ap_summary,
           END OF t_ap.DATA: it_airplus TYPE STANDARD TABLE OF t_ap
    *call the transformation
    CALL TRANSFORMATION ZFI_AIRPLUS
         SOURCE xml l_xml_x1
         RESULT xml_output = it_airplus
         .see the complete report: Read data from XML file via XSLT program
    Create XSLT program
    There are two options to create a XSLT program:
    Tcode: SE80 -> create/choose packet -> right click on it | Create -> Others -> XSL Transformation
    Tcode: XSLT_TOOL
    For a quick overview you can watch at the SXSLTDEMO* programs.
    In this example we already use the three XSLT options explained later.
    As you can see we define a XSL and ASX (ABAP) tags to handle the ABAP and XML variables/tags. After "

  • I want to transfer some of the data from an intel 2006 iMac running 10.4.11 to a 2011 iMac running 10.6.8

    I want to transfer some of the data from an intel 2006 iMac running 10.4.11 to a 2011 iMac running 10.6.8. What is the best way?

    It depends on what you have. The options include:
    1. Connect them with a FireWire cable and start up with old iMac with the T key held down.
    2. Copy the files over a network.
    3. Copy the files to an external drive. Some files require the volume to be formatted as Mac OS Extended.
    (117837)

  • Regarding Class and Characteristics

    Can any body give  a clear picture on  Class and Characteristics
    i have seen this in batch and alos in variant it is common concept in SAP  please tell the concept behind this
    Thanks in Advance
    Rajesh
    Points will be rewarded

    Hi,
    when you want to assign different characteristics for a material we use the this concept.
    for example in pharma industry when we maintain batch wih characteristics like date of manufacture, though the material is same still we differentiate them it on the basis of batch thus ensuring a FIFO method.
    Similarly in Variant against the same materail the customer has a choice to selection the type of product he wants.
    so all such characteristics(options) are assigned to a class and then to a material.
    regards
    sadhu kishore

  • ADF 11g can not select and copy data from cell of readonly table in IE

    hi,
    In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
    is it a bug?
    Edited by: kent2066 on 2009-5-18 上午8:46

    Hi Timo,
    Sorry forgot to mention versions.
    We are using 11.1.1.7 and IE 9.
    I tried in Google but could not get the solution.
    Kindly let me know solution for this.
    PavanKumar

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • I have 2 Macs - an iMac that holds my entire iPhoto library and a Mac Book Pro that I use to hold a subset of the main library - how can I transfer photos and their metadata from the main library of the iMac to my Mac Book?

    I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?

    Link the two Macs together and use iPhoto Library Manager
    Regards
    TD

Maybe you are looking for