Transfer of a fixed asset to a WBS

Hello Everybody ,
I need your help.
A new scenario has come over here and i am not getting how to implement it in
SAP .
Scenario is :
1. We have a fixed asset at cost center .
2. Now the asset is need to be replaced .
3. We settled new asset at that cost center .
4. Old asset needs to be used in a project.
Problem is :
Client is required that old asset that was replaced, should be transferred to a new project or WBS where the asset final cost
(including depreciation) should consume the budget from the WBS .
Example:
Asset cost along with depreciation is say Rs 50000.
We transferred an Asset to a new WBS where budget is defined 80000.
So as asset gets transferred , remaining WBS budget value should be 80000 - 50000 = 30000 means old asset value should get expensed by WBS .
Then later on we can settle the asset along with the AUC of WBS.
Conclusion:
We need to transfer an fixed asset that is not in anymore used in that defined cost center and need to be replaced and after replacement it should get transferred to a WBS where WBS budget value would be reduced equal to asset value along with depreciation and later on we could transfer it to a cost center where asset is required.
Thanks,
Jagjeet Sandhu

Hi Sunil.
Thanks for your valuable response .
But issue is bit different
Scenario is :
We dont have to make asset as an scrap.
Ex:
We have to take the same asset to another WBS without making scrap and the current asset value should be expensed from the defined WBS budget .
How the asset at cost centre would be transferred to WBS and should be capitalised again at new WBS .
Kindly share the procedure .
Thanks & Regards

Similar Messages

Standard report to check total cost (WIP) or before transfer to fixed asset

Hi All,
Is there any standard report to check total cost work in progress (WIP) or cost before we transfer to FXA (fixed asset)
Please advice.
Thank you.
Nies

Hi,
You can use the report RKA_SETTLE_TABLES_COMPARE for finding the WIP awaiting settlement. You need tp pass object number for executing this report. For getting the object number, you can use report:RKACSHOW.
If useful, please close the posting.
Regards
Muraleedharan.R

Assets (Investment profile): Transfer value from AuC to Fixed asset

Good afternoon all,
We have implemented Assets across investments profile. The settlement of investment is u201CSummary settlementu201D and we do not have u201CList of Originsu201D.
We have created a project and then a WBS that automatically creates the AuC (asset under construction). Transaction code CJ20N.
Then we have created the purchase order (ME21N) and afterwards we have carried out an entry sheet (ML81N) where we have informed the WBS previously created.
Through CJ88 we have done the settlement of the WBS and we have checked it.
Now we have created the fixed asset and we would like to transfer the value of the AuC to the fixed asset. I am not able and I am a bit lost. I do not how to perform it.
Any idea?
Many thanks and regards in advance. Daniel

Hi Renfe,
If the asset is an asset under construction belonging to an investment measure, then the transaction code KO88 needs to be used.
Warm regards,
Murukan Arunachalam

Settlement of WBS to the Fixed Asset in another company code

Hi Friends,
I have another problem with WBS elements and fixed assets.
I used WBS elements to create a AUC by AUC settlement in company code A. Then I put a second settlement rule with settlement type "FUL" in WBS element and settle AUC to a depreciable asset in company code A. Then I transfer the depreciable asset from company code A to company code B. Now I put the current month as the end day of the second settlement rule and add a third settlement rule in WBS element in compnay code A. The third settlement rule will settle to the depreciable asset in company B. When I am adding the third settlement rule, the system gives an error: "Asset XXXX not in company code A" .
Then I add another WBS element in company code A and put a settlement rule which settle to the depreciable asset in company code B. The system did not issue any error. Everything works fine.
So it seems the WBS element cannot settle to the asset in the other company code if it created a AUC in its own company code.
People told me that it worked in their legacy SAP system. So I am wondering whether there is some settings that I did not do, which caused this problem.
Do you have any idea about this?
Thanks,
Ting

in the requesting company codeon the wbs master data enter the company code for which the AuC and the fixed asset will be created
in this way you can settle from a project in one company code to an asset in another company code

Mass transfer for AUC to Fixed assets

Hi,
I would like to do a mass transfer from AUC assets to fixed assets. 900 new fixed assets have been created. However, the AUC settlement to 900 assets are very tedious. Are there any batch processing available for this ?
Or can I use via LSMW ?
Thanks.
Angel.

Hi,
Prepare an excel sheet with columns as shown in the settlement rules screen and then paste it into settle rules screen.
I hope this can be done.
Thanks,
Srinu

Transfer Fixed Assets From Profit Center to Another

Dears,
I have transferred a fixed assets from location to another location. So that, I have to change the profit center for the transferred fixed assets.
I tried to do the following :
AS02 => Time dependent =>More Intervals => Add Intervals .
But the cost center is not able to be changed.
Please help...
Thanks

HI,
To trasfer an asset from one profit center to other profit center, create an asset in receiving profit center and run transaction ABUMN. System will retire asset from sending profit center and the value will be trasferred to receiving profit center.
You can also have second option for this, change cost center of asset by defining the validity for the same.
Hope this would help you.
Regards
Pankaj

Fixed Asset Report datewise

Hai Experts,
      My report requirement is to get list of Fixed Asset by date wise. Now i am using BAPI_FIXEDASSET_GETDETAIL.
This BAPI is giving output by year (Fiscal year).
       Please help me is there any other BAPI or Function Module to solve my issue. Also tell me the alternative solution for this.
Thank you,

check these
BAPI_FIXEDASSET_CHANGE         Changes an Asset
BAPI_FIXEDASSET_CREATE         Creates an Asset
BAPI_FIXEDASSET_CREATE1        Creates an Asset
BAPI_FIXEDASSET_GETDETAIL      Display Detailed Information on a Fixed Asset
BAPI_FIXEDASSET_GETLIST        Information on Selected Assets
BAPI_FIXEDASSET_OVRTAKE_CREATE BAPI for Legacy Data Transfer
BAPI_FIXEDASSET_TEST           BAPI for Legacy Data Transfer
AMFA                           Fixed asset posting BAPIs
Thanks nd Regards,
Karthik

Fixed Asset Importation Issue (Capitalisation Date)

Hello experts,
I have an issue regarding fixed asset importation.
I've import the fixed asset master data correctly in the system, with it's correct capitalisation date, APC, depreciation cumulative value and everything else correctly in the master data. Under Administration --> Data Import/Export --> Data Import --> Import Fixed Asset Master Data from Microsoft Excel.
However, where the issue is, it's now on the fixed asset history sheet, where the capitalisation date, is defined as the first date of the fiscal year "01/01/2014". Where by none of these assets were purchased on that date. But everything else on the report is correct except the capitalisation date.
Due to this issue, it is hard to explain how an asset was purchased on 01/01/2014, which have a use full life of 4 years, has depreciate completely in 2015. But if I check in its master data, I find out the capitalisation date is like in 6 years ego.
Note: I'm using SAP Business One 9.0 PL11
Any suggestion, comment or help is highly appreciated.
Best Regards,
Cedric Kayitare

Hi Cedric,
Capitalization date won't change it self after import. Check your import sheet which capitalization date you have enter. you need to execute fiscal year change and then import sheet.
If you have capitalization date for different years then you should have all period created and then year transfer.
In that case you will have to run depreciation from SAP for all corresponding year.
Post your sheet with heading for more understanding.
Regards,
Chintan

Fixed Asset Import fails

HI All,
I am getting the below error message when I import a fixed asset master data.
'' Import End; Number of imported asset: 0; Number of processed
assets: 0; Error: 1".
I have gone through SAP note 876670 which explains about this sort of errors and corrected the date format but still no luck. Can someone tell me if somethingelse need to be checked ?
Await your respnse
Thanks
Johnson

Hi Johnson,
You may check more threads here for example:
How to import Fixed Asset Master File
Fixed Assets Transaction: Transfer => Error
Check your import data carefully, one comma difference would result great difference.
Thanks,
Gordon

How to import Fixed Asset Master File

Hi all expert,
I used BAMasterDataImportFile to import the Fixed Asset. But the message as below appear :
"Import end;Number of successfully imported assets: 0;Number of processed assets:2"
After complete import the fixed asset master files still empty. May i know anybody can advise me for import fixed asset files?
Thank for help.
From:
Eric Tan

Hi Eric,
Please refer your error with the possible reasons below (from SAP notes):
Error message: "Import End; Number of imported assets:0; Number of processed asset:2"
Reason: Note that there is no error. It is usually because of the conflict of Depr. Start Date , Use Life and Remaining Life.
The following is a list of possible errors:
1. Fixed Asset in Production Mode -- Make sure Fixed Asset is in Transfer mode before importing.
2. The number of semicolons for each line is not 66 -- For each line, each field must be separated by a semicolon(, the number of separators( should be 66. Number( = 66.
3. Wrong Date Format DD-MM-YYYY or MM-DD-YYYY -- The correct date formats should be : YYYYMMDD, YYYY-MM-DD, YYYY.MM.DD or YYYY/MM/DD
4. Asset Class unavailable -- The asset class in your csv file does not exist in Fixed Assets; make sure the used asset classes are defined in Fixed Assets before importing.
5. Depr. Type unavailable -- The given depreciation type does not exist in Fixed Assets, make sure the used depreciation type is defined in Fixed Assets before importing.
6. Depr. Area unavailable -- You entered data for a depreciation area that does not exist. If there are only 2 depreciation areas in Fixed Assets do not enter data for area 3 or 4.
7. Depr. Area is inactive for asset class -- You entered data in the csv file for an area that is not active for the given class in Fixed Assets.
8. Life parameter is negative or the remaining life is greater than planned life -- All life parameters should be positive, the remaining life should be less than the planned life
Life Parameters(Depr. Start Date, Useful Life and Remaining Life) are mathematically incorrect for one of the areas in csv. Remaining life = Useful life - (the difference between the first date of import year and depreciation start date). Note that it is not the difference between import date(the date you import Fixed Asset Master Data) and depreciation start date. You must calculate the remaining life correctly. For example, you want to import an asset in 2005, you import it on 2005-09-01 ,then the first date of the import year is 2005-01-01, Depr. Start Date = 2003-06-01, Useful Life = 60 months, then
      Remaining Life = 60 - (2005-01-01 - 2003-06-01) = 60 - 19 = 41 months.
      The following calculation is wrong:
      Remaining Life = 60 - (2005-09-01 - 2003-06-01) = 60 - 27 = 33 months
Import Fixed Asset for the current fiscal year -- The fixed asset master data import function is designed for legacy data importing. We recommend you to import fixed asset master in the past years. If you insist on importing an asset for the current fiscal year, make sure the depreciation start date is the first date of current fiscal year and the Remaining Life is the same as the Useful Life.
Year Values -- the sum of the accumulated depreciation (planned, unplanned and special depreciation) in the csv file is greater than the acquistion and production costs.
Also, don't forget to change the fixed asset mode to transfer. Administration>System initialization>Company Details> Basic initialization tab.
Hope this helps.
Rogelio Elicor Jr.

Fixed Asset: market value

Hi All!
Due to IAS we must post an special provision:
when the inmaterial fixed asset value market is minor than fixed asset net value we have to post a provision by depreciation (in order to reflect the possible loss when we sale it)
This provision does not affect the fixed asset countable net value. So that provision don't have post in 01 depreciation area. But:
1- when we sell the assets the provision must appear in the sale affecting to the benefit or loss.
2- I need to know the provision for each fixed assets. That's why we need SAP shows its in FI-AA area.
With the transactions under Manual Value Correction folder (fixed asset menu) the fixed asset net value is modified.
We've tried to implement a second area doesnt affect to fixed
asset values from the 01 depreciation area and vice verse to post there this provision. But The system doesnt allow that (message error number AC528)
Do have more ideas?
Thank You in advance

Hi Vijay, thank you for your answer but...
It seems that Transferred Reserves is used to sell a fixed asset and transfer the benefit to other asset (If I've undertood right)
I put an exemple to fix the question:
I adquiered a fixed asset by 1.000 euros (a building) in 2005
- Deprecation key: LIND (Str.-line) / Use Life: 10 years
In 2007 my building on second hand house market is valuated in 500 euros (minor than fixed asset countable net value 800 euros).
So I must post a provision by depreciation by 300 euros. That post does'nt affect to fixed asset countable net value (is just a provision). My fixed asset countable net value is 800 euros.
In 2010 I sold my asset by 1.000 euros. My fixed asset countable net value is 500 euros. So my profit is 500 euros. Then I must to reverse the provision post in 2007 .
I need to post that provision related to fixed asset but without affect to asset net value, to reverse that in the asset sale.
Thank You very much
Francesc

Fixed Assets - Tax Book Depreciation Reset

Hello Fixed Assets Experts,
My company recently reorganized our parent company, and now has the following scenario:
Due to legal changes, we need to start over the useful life on our tax books (10 and 11) and restart the calculation of depreciation based on the net book value of the asset on 1/1/2008. Book 01 needs to continue as normal. We would like to use the current asset numbers and not transfer anything to new numbers. These are all of our FFE assets, so there are multiple depreciation keys and useful lives (i.e. computer equipment, property, etc). I have tried making custom depreciation keys and changing the useful lives to get the desired result, but can't seem to find a way to do it.
Here is an example:
Asset 1 (software), was capitalized on 06/30/2006 with a useful life of 3 years and has been depreciating since. It is scheduled for end of life in 2009. The net book value of the asset on 1/1/08 is 1219.97. I need to depreciate the 1219.97 over 3 years starting on 1/1/08.
Is this possible? We have not run our December 08 depreciation, but I am running out of options.
Thanks in advance!

Do you working on ECC 6 and activate the option EA-FIN. In that case it is possible to use time intervale in the tab Depr Areas (click 2 times on the line). This should solve your problem.
See the wiki about new depreciation
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting

SAP fixed asset add-on. Not able to import master data using upload pgm.

Hi all,
I am trying to import fixed asset master data using an excel file into sap B1 2007a patch level 42. I am able to run the import transaction. It tries to process and then giving me a message ' Import end: Number of successfully imported assets: 0. Number of processed assets:2. We have looked at the event log file and couldn't find anything related to the upload. I have gone through other posts and didn't face this issue. Any hellp is apreciated.
Path which I am using to upload the fixed asset master master data: Administration --> Setup --> fixed asset --> import fixed asset master data.
Following points (see below) also taken into account while creating the master data sheet.
also replaced the ',' in the csv file to ';' before uploading and changed the fixed asset mode to 'transfer' in the administration --> system initialization > company detaills> basis initialization.
Thanks
Johnson zavier
Mandatory:     Item Code = Asset Class; this Asset Class must be previous defined in the Asset Settings (don't change/delete anything in the item-master data - there are the Asset Classes Z-00u2026. Are stored
     Description = Description of this Asset
     Capitalization Date = do it like this (YYYY-MM-DD). This columne must be a text format
     APC = Aquisition/Procuction Cost; when you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Quantity = only mandatory, when you use the same assets stored under one asset number. Example you have ten equal chairs, so you can handle this with one asset number and quantity ten
     Dep01 = Depreciation area; this entry must be previous defined in the Asset Settings
     Depr Start date 01 = do it like this (YYYY-MM-DD). This columne must be a text format. The beginning must be the first of the month. Please compare it in this case with the capitalization date
     Useful Life 01 = calculated in months (not years)
     Remaining Life 01 = calculated in months (not years)
     Depr Type 01 = Depreciation Type must be previous defined in the Asset settings
     Ordinary Depr 01 = ordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     Unplanned Depr 01 = unplanned/extraordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
     SpDpAcc1 01 = Special depreciation account; when you use special depreciations and you have it to balance on special accounts fill in this account. This is an exeption - in normal projects not needed
     SpDpKey2 01 = Special depreciation; when you use special depreciation you have to enter this cumulative value in this field. This is an exeption in normal projects not needed
     SpDpAccu2026 = for further special depreciation accounts; This is an exeption
     SpDpKey.. = for furhter special depreciation values; This is an exeption
Optional:     Vendor Code = when using this please be aware that the vendor code is previous defined in the system
     all others = you can use if you want. The only limitation is the type/length of these fields
     When you are ready with your entries mark from the first free row on for instance the next 20 rows than right mouse key - delete rows. This is necessary to prevent that in the background are invisible signs
     After entering in this default excel all your assets, please save it as .csv file. (the grey message - relation to information of csv - please say yes; when you close than excel a furhter message - would you save.. - please say no now
     After entering all data please save it as .CSV file. First grey window (format information) please choose 'yes'. Second window (when you close this file) please choose 'no'.
     You have now a .csv file in hands right now for uploading into the fixed assets.
     This example you can use for a test-import based on the year 2004

The issue was because of the conflict of Depr. Start Date, Use Life and Remaining Life. After I corrected the data, it worked just fine. The note 876670 helped me to resolve this issue. Thanks to Adam at Toronto SAP Business one support for his expert analysis and suggestions.
thanks
johnson zavier
Edited by: Johnson Zavier on Feb 19, 2009 11:10 PM
Edited by: Johnson Zavier on Feb 19, 2009 11:20 PM

How to take Profit Center Wise (Customer Line item & fixed assets)?

Profit Center Wise (Customer Line item & fixed assets)
GL Report: S_ALR_87012282 (Profit Center wise GL A/C Line item)
AP Report: S_ALR_87012103 (Profit Center wise Vendor A/C Line item)
Similar for I want customer line item wise and fixed asset line item (profit center wise) report, S_ALR_87012197* this for customer line item wise report but,Here in the dynamic function there but not available in profit center, I need report what t.code available in profit center wise customer line item and fixed asset line item.
Thanks in advance
Selva

Hi Sweta
For obtaining profit center wise receivables/payablees and stock reports, you may need to follow these steps at every period end.
1. Execute F.5D - Calculate Balance sheet adjustment
2. Execute 1KEK - Transfer Payables/Receivables
3. Execute 1KEI - Transfer Assets
4. Execute 1KEH - Transfer material stocks
5. Execute 1KEJ - Transfer Work in progress
For more information, you can read the heading "Balance Sheet Items in Profit Center Accounting" in the below URL.
http://help.sap.com/saphelp_erp60/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Regards

AuC to Fixed Asset Settlement... (through Investment Management)

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to that AuC?
Kindly assist....

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to the same?
The reason for this is my client made a down payment (with special GL indicator A) in December 2010 and he wants to settle the asset in December itself....
However, the down payment clearing is happening in this month.... But, he does not want to wait till the down payment clearing and wants to settle the same in December.
When he is trying to settle Without down payment clearing he is getting the following error...
Down payment to recipient 212000 0 area 01 amount 74,034.00 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 130434 0 in area 01. An amount of 74,034.00 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 130434 0.
Kindly assist on this issue.... whether it is possble or not?
Thanks in Advance

Transfer of a fixed asset to a WBS

Similar Messages

Maybe you are looking for