Transfer of service between lines & major loss of ...

Prior to Monday 1st March we had two phone lines installed, the first for phone and the second for broadband and fax (a legacy of when I required a separate fax line for work and when we using dail-up internet). The broadband speed was good, not the 8Mbs advertised, but I reckon perhaps at least 2Mbs (don't have the numbers from any old speed tests).
In an attempt to save some money and due to no longer requiring the use of the fax machine, on Monday I arranged for BT to transfer the broadband service to the phone line. The result however has been a shock to the system and a step back 10 years... the download speed now is 0.3Mbs! Nothing else has been adjusted - filters are in the right places, no difference in the cabling etc... Productivity has been majorly affected, and there's no point in making any attempt at streaming anymore...
Should I have expected to experience this major loss of speed after the transfer? Is there anything I can do, or is this going to be an issue for the BT complaints department?

For your selected line, on the Leadselection event, you can get the contents of the line, pass the values to the node that is mapped to the component controller.
Then in the other view, you can use the same node again to get back the values.
Mapping should be done properly.
So if the line in the table has 3 fields, all these 3 fields can be put to a node of Comp Controller.
Then this node needs to be bound both to view A and view B.
Hope it helps...

Similar Messages

Transfer Phone Numbers Between Lines on Same Account

Hello,
I'm on a family plan currently with 5 lines. One of the lines is no longer used, but it's contract doesn't expire until 2014. We have another line (on the same account) that is month to month. We'd like to cancel the month to month line, but keep the phone number. Is it possible to switch the phone number we don't use with the phone number we do use and cancel the month to month line?
I'm sorry if that sounds really confusing. Thanks for your help!

No. The contract is associated with the phone number and can't be transferred to another line of service.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

Transfer call from fixed line to BB Z10

Hello
When you transfer calls from fixed line to BB Z10 the device only gives a split second notification of transfer call and then you do not see it any more.
So it is difficult to see the difference between direct calls and my transfered call from my fixed line.
Is it possible to keep the notification of transfered call "on screen" when it is dialing?
With friendly greets
Karel

The Z10 gives a split second a notification that the incomming phonecall is a transferred call and then shows the phone number of the original caller. Afterwords there is no way to see the differance between the straight calls and the transferred.
With my old Nokia N8 there was an onscreen "green arrow" notification.
After searching a little on the web I found out that only the old symbian phones (and some other) had that function.
https://supportforums.blackberry.com/t5/BlackBerry-Bold/Bold-Diverted-Calls-Symbol-or-Icon/td-p/9232...
Its a pitty it doesn't work on a BB Z10. I guess it will not be changed as the post above is from 2008 and now we are 2014.
With friendly greets
Karel

Data transfer i happening between SAP CRM & PI portal,

Hi Experts,
How is the data transfer i happening between SAP CRM & PI portal,
how many ways it has been done ,Please explain the my query.
Idoc wil be doing this functionality?
Thanks & Regards
Prajith P
Edited by: Prajith Prabhakara on Aug 12, 2011 7:51 AM

- Web Services Description Language (WSDL)
- XML provides the common syntax for representing data.
More info, refer
[http://wiki.sdn.sap.com/wiki/display/ABAP/Web+Services]
[http://wiki.sdn.sap.com/wiki/display/XI/SAPXIQuestionsAndAnswers]
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c018da90-0201-0010-ed85-d714ff7b7019]
Good day..!
Cheers, Satish

Switch Service Between Bionic and Original Droid

I am transitioning from my original Droid to a Bionic. However, I would like to continue using my original Droid at work. (I've killed the camera in the original for work, and would prefer not to do the same with the new Bionic). I was expecting to be able use *228 to switch the service between the two phones, but I now understand that *228 does not work with the 4G Sim Card. Is there still a way to switch my number back and forth between the two phones?

Hi Fool68,
I see the reason why you want to switch devices, since you have limitations on using the camera while at work. Thank you to the community for your responses.
With a 4G phone, once the line is switched to a 3G device, the SIM card does have to be replaced in many cases. Changing devices from 4G to 3G is different, as the community mentioned. Below is some additional information.
original 4G SIM can be re-used with the same phone number if the technology change back to 4G is processed prior to 12:00 a.m. ET of the day the 3G change was initially completed.
After 12:00 a.m. ET, a new 4G SIM is required in order for the line to go back to 4G.
SIM cards can be obtained online, if needed. There is no charge for a SIM replacement. To order online, please make the change of the devices online and visit http://www.vzw.com . Login to your online My Verizon Account (with the Account Holder Number).
If a replacement card is needed, you will receive this option in the screen when making the change in devices and there is no cost.
I hope this information is helpful. Have a good day!

Does Solaris publish a feature / function mapping of container services between Docker and Solaris ?

Docker is getting huge attention but most consider it not ready for production. Does Solaris publish a feature / function mapping of container services between Docker and Solaris ?
Solaris containerization has been battle tested in production for many, many years.

You need to understand how IPMP is used within Sun Cluster. Start reading at
http://docs.sun.com/app/docs/doc/819-2968/6n57jmghj?a=view and
http://docs.sun.com/app/docs/doc/819-2969/6n57kl141?a=view
for a brief description. In a nutshell - the IPMP group is providing availability on the interface level for each node, so that a single NIC failure is not resulting into a service loss.
The IP adresses you configure directly (ie. via /etc/hostname.* setup) are always considered local to a given node.
In order to configure highly available IP adresses, which move between nodes and which should be used for the application you make highly available, you must use the SUNW.LocgicalHostaname or SUNW.SharedAdress resource types. Have a look at
http://docs.sun.com/app/docs/doc/819-2974/6n57pdjtt?a=view on how to configure them.
Greets
Thorsten

Transfer of Goods between Center (2 Steps MM-SD)

Hi Friends;
I have a little problem to which I have done several tests and did not have much success to complete the activities related to the transfer of goods between centers using the procedure I describe below:
- ME21N -> Creation of Purchase for transfer using the category UB (Stock Transport Order);
- VL10B -> Process documents for Shipping (using Purchase Order);
- VL02N -> To Process Delivery (Picking and deposit);
- J1B3N -> Issue of the tax document (invoice);
- MB0A -> Entry of Goods to Purchase Order;
The problem is that when I am doing the PO (First part of the process) I notify the PO type, in the field I meet the supplier center provider, I meet the item and the center of will receipt the goods. After all information completed on the screens of Purchase Order (ME21N) the system displays the following message.
u201CNot possible to determine shipping data for material 9999999u201D
u201CMessage no. 06280u201D
As this is the beginning all of process, I am not able to continue. I already made several checks which I will describe below, and still am not successful in completing the process.
u2022     The material is already expanded to the Center Supplier and Receiver;
u2022     The material is already expanded to SD View, with the sales organization, distribution channel and sector of activity properly;
u2022     Customer (center) already expanded to the Organization of Sales and Channel Distribution properly;
u2022     On the table is expanded KNVV you both for the organization's sales center provider for the center as recepitor;
u2022     On IMG:
    o     It was the assign of the sales organization of the center (Materials Management -> Purchasing -> Purchase Order -> Set up
        Transport Order -> Define Shipping Data for Plants);
    o     It was assigned to the Shipping Points (Logistics Execution -> Shipping -> Basic Shipping Functions-> Shipping points and
        Good Receiving Point Determination -> Assign shipping Point). Therefore the u201CShipping Conditionsu201D is properly linking to
        Custumer Data Master and Loading Group is properly to Goods Master Data.
Even with all these settings made, I am not having success in the process of creating of PO and start the procedure for transfer of material between centers and so I ask the help of colleagues to help me find what is still missing or set up in process that can make it flow.
Beforehand, Thanks a lot.
Vinicius

Hi ,
GOTO IMG -> MM->PURCHASING ->Purchase Order ->Set up Stock Transport Order->Define Shipping Data for Plants-
here for both receiving and supplying plant give the same sales org , distridution channel and division .
And in receiving plant maintain the customer no .
And one more thing do the PO as document type NB (standard order ) , then maintain delivery type NLCC against NB in customizing (GOTO IMG -> MM->PURCHASING ->Purchase Order ->Set up Stock Transport Order ->Assign Delivery Type and Checking Rule )
Regards,
Anupam
Edited by: Anupam Halder on Jul 28, 2009 7:07 PM

How do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again

how do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again

Did you do this?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Page break between line items and address in invoice

Hi Team,
I am getting a Page beak problem between line items in an invoice.
If i have 10line items which needs to be displayed in the output all are displayed in 3 pages. but my problem is when displaying the line item details in any page it should be fully displayed on the same page else it should go to the next page for display.
Each line details needs to be printed on same page only (currenty Items and adresses are split up in different pages. ).
Please let us know how can i solve this.
Thank you for your help.
Best Regards,
Kumar.

Hi Karthik,
Thank you for your answer.
I have already done creating a folder and grouped the text elements as you have suggested in Mainwindow. I guess my explanation on my issue is not clear.
Actaully after printing the number of line items in an order we are printing the Certificate recevier details as a last row which is now having the problem, and it is getting truncated into two parts when enough space is not there to print on the same page.
If i make the text element related to the Certificate receiver properties to Page protection will it work ? i will try this option now..
Mean while any suggestion on this regard is welcome.
Thanks alot for your help.
Best Regards,
Kumar.

Table to see the link between line items on bank statement to customer invo

table to see the link between line items on bank statement to customer invoices

Hi,
There is no link from VBRP to BSEG directly.
This is because the data in BSEG is posted to various accounts and the VBRP is usually for a Sales Order or Delivery.
However there is a link from BKPF to VBRK and VBRK is linked to VBRP.
BKPF-AWKEY has the the Invoice number VBRK-VBELN
Hope this helps.
regards,
Advait

How do I add space between lines of text in the same cell on Numbers 3.0.1

I just updated to Mavericks 10.9. In numbers, I used to be able to uncheck a box in the inspector that would make it so the Return key did not move to the next cell, but instead allowed me to add more space between lines of text in the same cell.
How can I do this in the new version of numbers?

HI ilb,
Numbers 3 is a complete rewrite of the application. This preference option hasn't (yet) been included, but N3 is very much a 'work in progress. A word to Apple via Provide Numbers Feedback asking to have this option included in Numbers 3 might be a useful step. You'll find Provide Numbers Feedback in the Numbers menu in Numbers.
Regards,
Barry

Transfer app purchases between accounts

Hi all,
Is it possible to transfer app purchases between two different accounts?
I trashed my old account as my iPhone was stolen. Recreate the account with the exact same information. Unfortunately I cannot update my apps as it says that I'm on a different account.
Any idea how?
Thanks.
Cheers, JS.

:"Is it possible to transfer app purchases between two different accounts?"
No.
"I trashed my old account as my iPhone was stolen. "
Why would you do that? Just change your password.
". Unfortunately I cannot update my apps as it says that I'm on a different account."
because you started a new account. not sure why you would do that.
"Any idea how?"
You would have to sign into the old account in order to upgrade. This is why you don;t go creating new accounts when you can just change your password.

Process efficiency: transfer of stock between 2 sites

I'm looking for some input/experience concerning the comparison of user workload "in minutes" for WM Transfer of Stock between (2 storage types) (process in 2 steps: step1: transfer "issue"- Step2: validation of transfer) and Shipping between 2 SAP plants in the same company code based on MM SA - SD SA + Goods receipt.
Thanks

Hi Umesh,
It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
Hope the above helps.
Regards,
Vivek

Service PO Line Items u2013 EXT_LINE Replication values

Hi,
We have run into a new production problem replicating service po changes to our ECC 6.0 backend system from our SRM 5.0 EC system.
Weu2019ve reported the problem to OSS but weu2019re not able to come to an understanding.
When we add a new service item line to an existing service po in SRM, the existing ERP po is not updated correctly. The LINE value for the new/added service item in the ERP PO seems to be the same as the SRM PO service line item value instead of the next sequential base 10 number.
The original service LINE values in the ERP PO are assigned as per our ERP config which is increments of 10 (ie. With 2 service lines, 10, 20, u2026)
If a new service item is added to a PO that already has 2 service item lines, the new item is assigned the number 3. When replicated to ERP, the new service item is added as 3 to the existing 10 and 20 items.
Is there config in SRM to set the EXT_LINE values in increments of 10 instead of 1 as it currently appears to be replicated to ERP so it matches the ERP config? Or is this an error in either ERP or SRM?
Thanks,
Jerry

SAP is providing an OSS note to correct the problem.

Transfer of service between lines & major loss of ...

Similar Messages

Maybe you are looking for