TransferHandler - Clearing after a paste

Hi,
I was wondering how to stop double pasting.
Once I paste from the importData(JComponent, Transferable) function, I would like to clear the Transferable so that it cannot be re-pasted again.

My problem is that it is not just a string, it is a pretty complicated set of ui components being transfered, and it is valid to paste them into themselves... (its a graph with nodes and edges) so the original gets changed - and then things get very messy.
Hmm... now that I think about it, I should just disallow the nested pasting behavior instead. That would make more sense... ok never mind.
Thanks though!

Similar Messages

LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Hi,
For example itab-matnr is your screen field
in PAI
field: itab-matnr,
module check_matnr_0700.
module check_matnr_0700 input.
move itab_matnr to v_matnr.
endmodule.
in PBO.
move v_matnr to itab-matnr.
a®

Document not auto cleared after performing FF67

Hi all,
firstly i would like to acknowledge that i'm using version 4.7.
after performing FF67, bank recon document generated in main bank & clearing bank GL accounts. But it is not auto clear in the clearing bank GL account. the treatment is as post GL account & manual clear.
after checking:-
1. trans type ABC using int. algorithm 15 - use assignment field to clear.
2. posting type in posting rule is 4 - clear debit GL account
in FF67 screen variant, assignment field entered the same as assignment value in clearing bank account. by right, the documents will clear off automatically.
anyone can assist what else that i miss out?
thanks in advance.

hi..
we can perform manual clearing or F.13, but the pupose of having such posting rule and posting type is to minimize steps of clearing.
by right, once ff67 posted, the clearing bank gl account will get cleared.

How to find the folder (EBS_R12) in OEL 5 after copy/paste from Windows 7 ?

Folks,
Hello. I have just installed Oracle Linux 5 as Guest OS on the top of VMPlayer. Host OS is Windows 7.
I downloaded Oracle E-Business Suite R12 from edelivery into Windows 7 in a folder(EBS_R12) on my LapTop screen.
In order to install EBS R12 into Oracle Linux 5, I copy/paste the folder EBS_R12 into Oracle Linux 5 screen. The file size is about 50GB. After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.
Can any folks tell me where is the folder (EBS_R12) in Oracle Linux 5 after copy/paste from Windows 7 ?

Hi,
After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.Was the copy/paste successful.
If yes then you can do the following
#find / -name EBS_R12 -type d -print
(Assuming you copied the folder "EBS_R12" , But not its contents).
Thanks

Why com.sun.CORBA.ORBServerHost can not be cleared after the JVM is closed?

run an application on a multiple IPs windows box. In order to initialize the ORB on the right IP, i set the com.sun.CORBA.ORBServerHost property at the app startup.
If the right IP is set, then the software works fine as expected. Btut ionce the wrong IP is set, the software won't work even if I restart it with the right parameter. It looks like the new value just does not take effect.
And until the box is rebooted, the new parameter will take effect. As per my understanding, this parameter should be set at a JVM level and will be cleared after the JVM is shutdown......
Have no idea how to fix this issue and even don't know where to start to investigate it?
Would you please provide any suggestion on it? Thx in advance.

I had the same problem when I upgraded to snv_114 from snv_98
on SPARC. The important line in /var/dt/Xerrors is this one:
could not open default font 'fixed'
The problem (in my case, anyway) was that the fonts.dir files were
not updated during the install/upgrade process. This fixed it:
$ su -
# cd /usr/X11/lib/X11/fonts
# for f in *; do cd $f; mkfontdir; cd -; done

Note 916654 - LM13: Verification field not cleared after [Enter] key

Hi Experts,
I'm facing the issue as stated in the OSS note 916654 - LM13: Verification field not cleared after [Enter] key. My current system is ECC, that is why the OSS is already applied to the ECC version. But the problem is, i still faced the problem stated in the OSS.
Symptom
In customizing:
- You have defined [ENTER] in destination screen 302 to SAVE items.
- You want to verify the destination bin information.
You use 'Confirm Transfer Order Clustered' RF transaction LM13.
You scan several SUs and press enter.
You press [F4-Next pushbutton] to confirm the associated TO(s).
In the destination screen 302, you scan the verification value for the first item and press [ENTER] key.
==> The item is confirmed correctly but when the system proposes the next item, the verification value of the first item is displayed.
Anyone know how to fix this issue? Pls help.
thanks
Hooi Fung

Thanks a lot for your prompt answer. Well yes if i clear in the PBO the value gets cleared, but then i wanted to get the next records value into the value field, well the problem got solved in a much easier way i put everything into one chain endchain statement.

Printing quality Is not clearly after Acrobat 8.1.2 Pro updating (HP Deskjet 9800)

*** The contents wrote with the auto compiler. (Korean -> English)
*** Meaning of the writing could not be delivered smoothly.
From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
To previously there was not a problem to printing quality.
Like this problem gets why?
--- System
OS : Mac OS X 10.5.2 Leopard
App : Adobe Reader 8.1.2
Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

Will the 4.0 GB of space erase or clear after the 24 hours of rental of the movie

Will the 4.0 GB of space erase or clear after the 24hour time of a rental of a movie.

Yes

Problems with Premiere Pro 2.0: sound lost after clip pasting

To integrate small projects to one bigger Project, it used to work well with Premiere Pro 1.5 in the following way: import small projects into the main sequence of the new project and, in parallel, copy the clips from the timeline of the small projects and past them into the timeline of the new project. However, I am encountering the following problems while trying to do the same thing with Premiere Pro 2.0:
·        Video and sound of every pasted clip becomes unlinked.
·        Although the sound was there (also shows in the wave view) right after the pasting and it can be rendered, but the audio Information gets lost as soon as I exit the new project (saved beforehand). If I re-open this new project, although the timeline shows all the pasted sound clips, but there is information in them - no sound (the wave views show only straight lines).
·        As well, some of the video and audio effect settings get lost (e.g. cross fading), but the effects such as brightness and contrast settings always remain.
·        At least one thing seems to be sure: the imported files themselves are ok. Newly created clips in the timeline from those imported files (dragged into the timeline) are fine - no information lost.
All tips are great helps. Thanks in advance.

I got it!
Though not described in the English HELP, but in the German HELP: I have to press the Shift and T Keys. It works in my case with the following steps:
1.     Mark the corresponding audio and video tracks
2.     Put CTI over the clip
3.     Press shift + T
4.     Double click the clip
5.     Eventually I have to repeat and press the keys shift +T again.
Thanks a lot once more for all of the hints and the detailed explanations. It is indeed a great help. I really appreciate it very much.
tryerlu

App updates won't clear after downloading on iPhone 4s ios7

After updating a number of apps recently I have this ongoing list continuing in the App Update after successfully downloading. They all show 'open'. But the apps won't clear after reboot.

Yes.
They fall off the bottom after 2 weeks.

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

Copied words into browser do not clear after closing session

When I go to a site that needs a password, I copy it from Last Pass into my browser. Then I enter my username and paste the password. Then when done, I sign off and close the page. I can go to another page that may want information. I fill it out and the previous password is still there and the only way I can get rid of it is to copy something new into the browser. Then, I have that new word stuck in my browsers. Whatever word is in there will only go away wen the computer is restarted. This can be just a password or any words that were copied and then pasted.
It used to be when I left a site that required a password, for example, when the page was closed, the word was gone instantly. I remember going back to a site that I need to do additional work on and when I clicked on the paste, it was greyed out or it would come up blank. That has how it has always worked until the last update. Have checked all security, cookie, privacy settings and it is all the same. Have tied every combination of settings and nothing will let the word or words clear out after I close Firefox. All browsing history ans history is cleared each time, but I have no control over the info copied into the browser, except to copy in something like 10 Xs, but then that stays. Have worked on this for a week and it really has me bugged. Last Pass told me it is a Firefox problem?

My Last Pass usually fills in everything just fine and there is no need to copy anything, it automatically autofills. On one credit card site, It will not let me use autofill, so I enter my username, look up my 75 digit password and copy it and then paste it to the site. It used to be that when I left that site and had to comeback to it for some reason, the pasted password was gone. I just thought this was a security feature. If you are saying that the actions I have described or completely normal and safe, I will just quit worrying about it. Thanks.

Why isn't Disk Utility clear after "Repair Disk Permissions"?

Having used my computer for several days I decided to use Disk Utility to “Repair Disk Permissions” after a few hours of use.
2008-11-29 08:30:17 -0800: Disk Utility started.
2008-11-29 08:30:24 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 08:30:24 -0800: Reading permissions database.
2008-11-29 08:30:24 -0800: Reading the permissions database can take several minutes.
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800: Permissions repair complete
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800:
I shut down the computer, turned off its power for 1 minute and restarted. I initiated Disk Utility once again.
2008-11-29 09:16:42 -0800: Disk Utility started.
2008-11-29 09:20:55 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:20:55 -0800: Reading permissions database.
2008-11-29 09:20:55 -0800: Reading the permissions database can take several minutes.
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800: Permissions repair complete
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800:
When Disk Utility was finished, I clicked on “Clear History” and reran “Repair Disk Permissions.”
2008-11-29 09:42:01 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:42:01 -0800: Reading permissions database.
2008-11-29 09:42:01 -0800: Reading the permissions database can take several minutes.
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800: Permissions repair complete
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800:
Now everything seems clear.
My question...
Why did I initially see:
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and why after restarting should I end up with only
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and after “Clear History” and rerunning Disk Utility why is everything clear until I start using the computer again?
I’ve had it explained that “Group differs on "private/etc/cups", should be 0, group is 26” is not meaningful, but I’d like to know WHY it happens. I’d also like to know why “ Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .” initially appears.
Thank you,
ZTIWYM3ZUI

As a casual "Apple Discussions" user it hadn't occurred to me that if a question had been answered previously, it should never be asked again.
It's not that. It's because the problem's been beaten to death over the past fourteen months, since Apple shipped Leopard, that most consider it common knowledge, no matter where one's been visiting or how often. Every Apple/Macintosh related website has addressed the never ending issue. Finally, since the forums Help file says:
*I have a question or issue—how do I search for answers?*
+It's possible that your question or issue has already been answered by other members so do a search before posting a question. On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+You can also refine your search by using the options in the Search Discussions Content pane. Click the Search Tips link for help with our search features. You can streamline your results by restricting your search terms by category or forum, specifying a date range, or searching for posts by username. You can also search the User Tips Library.+
Maybe that should be retitled: *+I have a question or issue—how do I resolve it?+*
Just out of curiosity, I wonder if any of these exceptional people can figure out my signature.
ZTIWYM3ZUI - "time is what you make—use it" or something of that nature.

No GR/IR items cleared after GR/IR clearing by F.19 and SM35

Hi experts,
After I execute the GR/IR clearing program through F.19 and then post the batch through SM35, I found the GR/IR open items have not been cleared, even though they match the clearing conditions. I test to create a PO, make the invoice receipt first and then goods receipt, so these two items should be cleared during GR/IR clearing. But after F.19 (With the indicator "GR/IR clearing" is ticked) and SM35, I can see the postings of "invoiced but not delivered" for other items, but the items I test to post still open. I've test in ECC5.0 and ECC6.0, and the results are the same.
Regards,
Walter

Hi Minghong,
MR11 seems not relevent because it seems to reverse the goods receipts or invoice verifications thus clear the open item. We know the F-03 can manually clear the G/L open items but we do not want to clear them manually. And in previous R/3 version, we can use the automatic GR/IR clearing in F.19 just by clicking the "GR/IR clearing" indicator. Now although there is still the "GR/IR clearing" indicator at F.19 in ECC versions, the indicator does not seem effective.
And as in my previous note, the F.19 in old version has a list with a field "assignment" for us to check the cleared items but the new version does not have. I feel strange the new version does not have the function instead, and the function is do helpful. Could you please advise?
Regards

Selected list in the right side of the shuttle gets clear after form submit

Hi all,
In my application, I have a list of email in the shuttle. User can choose the email from that list of email from the shuttle and/or they can also add additional email address separately. So, in my page, I have a shuttle which has pre-populated email list, and I have a text box and a multi-select list (where they can select multiple email address they entered and hit delete to delete them). The problem that I am seeing is, after selecting the email list from the shuttle, and if they entered additional email address and hit "Add" button (which is a submit button to add email address to the multi-select list), only one email address in the selected side of the shuttle remained. rest of them moved back to the left side. I am not sure how to accomplish not to behave that way. Can someone please guide me how to resolve this issue? Much appreciated. Thanks.
Soe

Just found out that there is some error in the page branch, which makes the shuttle to clear off. Now the problem solved. Thanks.

TransferHandler - Clearing after a paste

Similar Messages

Maybe you are looking for