TransferHandler.importData() lacks generality

Hey there,
I'm using a TransferHandler on a JTree. The problem is that the importData() method doesn't convey the semantics of the import. There is no way of finding out if the import occured due to a COPY or a MOVE, and the way that I need to handle the import is highly dependant on this.
Seem like this is a fairly fundamental flaw, so hopefully It's an oversight on my behalf.
Thanks for any help.

I'm not sure I understand the problem. The component where the transfer is coming FROM can tell what type of transfer based on how it is started. If the transfer is a "move" it can remove data when the transfer is done.
The component where the transfer is going TO shouldn't care.
So you need to first ask yourself if the target really, really, really needs to know or whether there is a better design. If the target must know, I don't think you can use the transfer handler to find out.
Kevin

Similar Messages

Infoset query of vendor payments at the cost distribution level

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIIT & FMIFIHD). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table do not work well. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
It would be ideal to have vendor in BKPF, like FMIFIHD has, but it isn't a field.
Does anyone know of any other options? I have seen the helpful thread on How to Read BSEG Efficiently

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Infoset query of vendor payments at the cost distribution level of the document

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
Does anyone know of any other options?

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

I bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly . Can anybody help.

i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.

Do you clean your iPad screen? Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended. There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.

Voiceover in new iMovie lacks major low frequency and general quality?

Anyone else observing that voiceover in the new iMovie on Mavericks sounds remarkably different?
Me: recording voiceover with the built-in mic on an early 2013 macbook pro - compared audio with previous old iMovie/mountain lion, quite a large difference. Audio previously sounded admirably rich and decent for a built in mic, but now sounds faint, tinny, missing serous low end. I've messed with the new equalizer features for voiceover - the 'Bass boost' setting certainly helped, but it overcompensates and sounds muddy in comparison to how the previous audio was.
Haven't tried using the mic in other applications to see whether the problem is local to iMovie - curious if anyone else has noticed this?
On the plus, the new interface suits me much better, and for some reason rendering movies seems to be taking about 5 minutes compared to previously 5 hours? Ok I'll take that.

I have the same problem. Just tried using iMovie 13 for the first time (have been using FCE). My microphone is a Blue Yeti, which gives superb results in FCE.
Does anybody know what's going on?

Lack of loopback on Home Hub 3 is making me consid...

The lack of loopback on Home Hub 3 is making me considering quitting BT Infinity. Why? Because as a software developer this is a giant paint in the **bleep**!
Every application I develop from home has to use local IP addresses, which means it keeps adding development time to my projects as I cannot use hostnames and have to keep writing go-arounds. It's a giant PITA!
I mean, sure, if you didn't support some wacky new technology that only 1% of people used then that'd be understandable but BT Infinity is FAST internet and people who pay £40 a month for FAST internet usually aren't the clueless old people you think they are!
I don't even like BT I think you lot are a bunch of crooks, but I don't live in a cabled area in my new house so I'm stuck with you. Considering moving to a friends FTTC service even if I do have to pay £20 extra a month.
So BT, pull your finger out of your god **bleep** **bleep**, hire some decent developers and fix your **bleep** because I and thousands of other customers are wound up by this. You're doing nothing to inspire loyalty. Nothing.

Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
Its possible one of the forum members may be able to help you if its a general enquiry.
You do have the alternative of using your own router, there are plenty of cheap cable routers available.
If you only have one PC connected, then you can connect it directly to the modem, by setting up a PPPoE network connection type.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem with Drag and Drop (TransferHandler)

I have a stern problem with the java.swing.TransferHandler. It shows a design weakness, and because of a tiny glitch I am currently not able to finish my task.
The design weakness is that method importData(JComponent comp, Transferable t) does not pass the dropAction information in the parameter list. The application case in question is a transfer from a JTree to a JTree (might likewise be to/from a JList). The transfer semantics imply that partial success is possible (there are item identity and uniqueness considerations to handle). - I can deal with all detail demands except that I cannot discriminate between COPY and MOVE taking place in the transfer. Also I don't find any possibility to retrieve this information by subclassing TranferHandler or from any other element there.
Is there any expert who knows a solution?

I came up with two solutions. One is I modified my application requirements for the time being so the problem disappears. :)
Second, I had the idea to create a subclass of javax.swing.TransferHandler and copy/override as many methods as necessary to allow for an extra method public boolean importData(JComponent comp, Transferable t, int action) and derive the extra value from a modified method DropHandler.drop(DropTargetDropEvent e) in a copy of the DropHandler.
Whether this really works, I have not tested.
As for your answer, Andre_Uhres, I don't find it elaborate enough that it leads to a solution, hence no stars rewarded. You leave it open how to get hold of the DropTarget events which are dealt with privately in javax.swing.TransferHandler.
I consider the subject closed for my purposes. Thanks very much for your reply!

General Ledger Accounting (New): Line Items 0FIGL_O14 Performace issue

Dear Forum,
We are facing a performance issue while loading the data to 0FIGL_O14 General Ledger Accounting (New): Line Items from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO.
Please see my requirement below for updating the data to 0FIGL_O14 DSO.
This report is generated to display Dry Dock and Running Repair expenses for the particular Purchase orders with respective G/L's.
1) The G/L DSO will provide us the 0DEBIT_LC and    0DEB_CRE_DC Foreign currency amount with signs (+/-) amounts and.
2) ZMMPRC01 Cube   will provide us the 0ORDER_VALUE (Purchse order value)and    0INVCD_AMNT Invoice amount.
While we are loading the data from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO ,we have created nearly 19 InfoObject level routine to derive the below mentioned fields data for MM Purchase Order related records.
0CHRT_ACCTS    Chart of accounts
0ITEM_NUM      Number of line item within accounting documen
0AC_DOC_NO     Accounting document number
0GL_ACCOUNT    G/L Account
0COMP_CODE     Company code
0COSTCENTER    Cost Center
0CO_AREA       Controlling area
0COSTELMNT     Cost Element
0SEGMENT       Segment for Segmental Reporting
0BUS_AREA      Business area
0FUNC_AREA     Functional area
0AC_DOC_NR     Document Number (General Ledger View)
0AC_DOC_TYP    Document type
0POST_KEY      Posting key
0PSTNG_DATE    Posting date in the document
0DOC_CURRCY    Document currency
0LOC_CURTP2    Currency Type of Second Local Currency
0CALQUART1     Quarter
0CALYEAR       Calendar year
For reference Please see the below logic to derive the data for PO related record.
DATA:
      MONITOR_REC    TYPE rsmonitor.
$$ begin of routine - insert your code only below this line        -
    ... "insert your code here
    types : begin of ty_FIGL,
                CHRT_ACCTS type /BI0/OICHRT_ACCTS,
                ITEM_NUM type /BI0/OIITEM_NUM,
                AC_DOC_NO type /BI0/OIAC_DOC_NO,
                GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
            end of ty_FIGL.
    data :it_figl type STANDARD TABLE OF ty_figl,
          wa_figl type ty_figl.
    SELECT single CHRT_ACCTS
                    ITEM_NUM
                    AC_DOC_NO
                    GL_ACCOUNT from /BI0/AFIGL_O1400
                      into wa_figl
                      where DOC_NUM = SOURCE_FIELDS-DOC_NUM and
                            DOC_ITEM = SOURCE_FIELDS-DOC_ITEM and
                            /BIC/Z_PCODE = SOURCE_FIELDS-/BIC/Z_PCODE
                            and
                            /BIC/Z_VOY_NO = SOURCE_FIELDS-/BIC/Z_VOY_NO
                            and
                            FISCYEAR = SOURCE_FIELDS-FISCYEAR.
    if sy-subrc = 0.
      RESULT = wa_figl-AC_DOC_NO.
    ENDIF.
    clear wa_figl.
Please note the same kind of logic is applied for all the above mentioned fields.
Here is my concerns and issue.
For the all above all routines i am referring BI0/AFIGL_O1400
DSO and finally loading to the Same DSO(BI0/AFIGL_O1400
The worried part is my DSO 0FIGL_O1400 is currecnly having nearly 60 Lacks records and MM cube is having nearly 55 requests which are required to update to the Above DSO for PO related PO value and Invoice amount.
The big issue here is while uploading data from MM cube to DSO say for example if the request is having 25,000 records from this nearly 500-600 records will be updated to DSO.
But here it is taking huge time ( nearly 3 days for request ) for updating these records , like this i have to pull 50 more requests from Cube to DSO as per the requirement.
Please note as of now i haven't created any indexes on DSO to improve this loads.
Please note am facing this issue in Production environment and need your help ASAP.
Thanks & Regards,
Srinivas Padugula

Hi,
If selecting data from 0FIGL_O14 is taking long time then you can create secondary indexes on DSO.
0FIGL_O14 would be huge as data volume directly corresponds to data volume in BSEG.
But for you requirement, I think what you can do is,
1. create multiprovider on top of DSO and Cube and create Bex report to give you the fields requried from both the infoproviders, you can then use open hub or APD approach to keep the data in the staging table or direct update DSO and then load the data to the DSO
2. Create secondary indexes on DSO so that fetching would be faster.
3. Do the enhancment at R/3 level to fetch fields from MM during load of G/L
Regards,
Pravin Karkhanis.

Business Preorder - Lack of Support

I wanted to express my disappointment with the lack of support from Verizon. I decided to take part in the iPhone 6 preorder Friday Morning. I got my order in at 2:14am Central or 12:14 pacific. This was only 14 min into the preorder. I took screen captures of the summary page and of the status of the model when I placed the order. For some reason there was an error with my order. This error had nothing to do with my side but rather Verizon. Our account page indicates a 9/19 delivery but at 12:57pm on Friday we received an email saying that the date was 10/21. I have been trying to get an answer since Friday afternoon and this was the response that I got back. I can understand making mistakes but the unwillingness to make things right is what frustrates me the most.
As you can see from this screen shot the order was placed 14min into the Preorder.
After the order was placed I took a screen shout of the inventory page.

Hi Christine,
but in the BC case you need to remember one more thing...
JDK 1.3
from java.sun.com
J2SE 1.3.1 has begun the Sun End of Life (EOL) process. The EOL transition period is from Oct 25, 2004 until the General Availability (GA) of the next Java version, Java SE 6 (code name Mustang).
so even if SAP will provide any updates it may not
work with unsupported java right ?
and java SE 6 will probably be sooner than
end of BC support I believe
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

SL3100 Pairing problem and the lack of intelligent reply from creative

I posted a message a day or two ago about having trouble pairing my SL300 with its own adapter. This was a brand new out of the box unit. Since the unit was new I thought I'd ask Creative to assist and wrote to their tech support, who returned with following response. In my opinion this response shows a total lack of product knowledge or any concern whatever that one of their OWN products does not work. Here is the response I received when I could not pair THEIR ADAPTER with THEIR HEADSET? both of which came in a sealed box from THEM?I apologize for any inconvenience this may have caused you. However, let me try my best to help you out in resolving this issue.
To assist you on this, you may want to try on the following
troubleshooting tips and see if they could help:
1. Try unpairing the headset. A headset can only be paired to one device at a time.
2. Recharge the headset and try pairing the headset once more. A headset will not automatically pair with the device again when powered on.
3. Check that the device being paired to the headset has its Bluetooth feature(s) turned on.
4. Ensure the headset is turned on and the battery is fully charged.
5. Ensure the headset is within one meter of the device while pairing.
6. Remove and replace the device's battery (if the device has a replaceable battery) and try pairing the device and the headset again.
7. If prompted by the device for a passkey, enter 0000.
8. Make sure the Bluetooth headset and the device are both running compatible protocols.
9. Make sure the Bluetooth headset and the device are both running compatible protocols.
10. Make sure there are no obstructions between the device and the headset when pairing.
11. Make sure the pairing is being initiated on the headset, not the device the headset is being connected to.
If the issue would still persist, the product may need to be repaired/replaced.
The problem you described indicates your unit may require repair or replacement. If possible, try exchanging the product for another from the vendor, for this may be much quicker and easier than having an RMA (Return Merchandise Authorization) issued. If this is not possible, an RMA will need to be arranged to have your product tested for repair/replacement.
If the product has exceeded its one year warranty period, an out-of-warranty RMA will need to be issued. This type of RMA requires a non-refundable US $25.00 diagnostics and handling fee for each out-of-warranty product. The fee is applied toward the complete cost of repair/replacement. If the cost of the repair/replacement exceeds the initial diagnostic fee, the RMA department will contact you to obtain your authorization for finance of the remaining fee. If the product has not exceeded its warranty, no diagnostic fee is required.

It is pretty standard practice for you to get a more general response first time as it eliminates most users problems. And, unless you doing the pairing incorrectly, it seems the email does suggest an answer (its faulty) and recommends replacement.
I would assume the problem is its broke too, so just try to return it to the shop you got it from.
Message Edited by lakin on 04-15-2007 10:02 PM

What do you do with a group of random pics + general questions

I am a potential new user of iPhoto 6 and Mac. I have been reading through the hundreds of threads for iPhoto. I have a collection of over 12000 images (some on a pc, some on cd, and others on floppy). I have yet to get the entire catalog organized to date even with several attempts. I hope the Mac would solve all my troubles so I am holding off any further cataloging.
On to my question - I usually take random photos of my kids or outdoors or otherwise, along with a full larger set of photos from a day outing. The first few wouldnt be album criteria in and of themselves, but the full set would (i.e. Day at the Museum). I wonder how this type of shooting is handled as far as organizing with the roll/album features in iPhoto6.
Also, isn't anyone really concerned about the lack of IPTC support in iPhoto? I currently use Elements 4.0 and the Organizer is fantastic (although hated by others). I personally find it very useful to have all my photos saved in folders by import date. I cant grasp the idea of how to get roll# from this to import into iPhoto.
I would hope to find a Mac program that supports the use of photo captions and keywords. It doesnt appear that iPhoto is it. Is it? Does it also support PSD files? I am trying to understand the process on how the file copies/moves/edits files upon import too. It is hard to imagine the process when I dont have it yet (but may within a couple months)!
I am sure I have many more questions to come, but I'll start with this if someone would be so kind to give me information. I have hunted for specifics and find only very simple how to steps.

photobug:
Welcome to the Apple Discussions.
personally find it very useful to have all my photos saved in folders by import date.
iPhoto will create a roll for each folder imported and name that roll the same as the folder. However, the date on the roll may not match the capture date of your photos but instead reflect the latest modification date in the bunch. You can change the roll date so that it lists correctly chronologically.
iPhoto also supports Photoshop files, psd. You can also edit your photo from within iPhoto with PS. Just go into iPhoto's preferences General pane and select Photoshop in the Edit photo in: menu. Now when you double click on a photo PS will open it and you can edit. There is one caveat, however. If you edit a jpg file and create a layered image file or one that required the psd extension you must save it to the desktop and then import as a new file. Once imported as a psd file, you can edit it again without issue, layers or not.
If you're interested in maintaining your source files outside of iPhoto you can use iPhoto's alias method (see the Advanced section of iPhoto's preferences) and just have iPhoto use alias files instead of copying the full file into it's library folder system. This way you can have your source files on an external drive and only the library folder on your boot drive. I have 27G of photos on my second drive and a 1.7G library on my boot drive. If you have a laptop and want to take it traveling you'll be able to view thumbnails, create and delete albums, add comments and, with some aggravation, add keywords. You cannot do anything that will require the full image file, edit, slideshows, books, etc. Once the external HD is remounted the library will be fully functional again. I've create a Tutorial to assist users in converting over to the alias system. Good luck.

Lack of vibrancy in photos

Hi
I have a MX925 which while I am overalll very pleased with The Photos that iprint while of good quality seem to lack a bit of "punch/ vibrancy" . they just seem to lack something ? what am I doing wrong ? .
I use adobe Photoshop elements 6
I appreciate this is a vague question but i would appreciate sme general advice on setting for the printer
I usually set it to
Glossy photo. High quality ,
Photoshop manage colours ,
Printer profile I use one that I I had set for me ie an ICC profile adjusted to my ink Foto rite , paper 7day shop .com 270grm glossy .
Rendering st to Perceptual
What am i missing ?
Thanks in advance for any advice given
Mike

Hi Me again i should have added that i am using Windows & Home Premium I have also tried printing photos set to plain paper while using glossy the result being a lttle lighter but still lacking vibrancy / Punch for a better word
Mike

Lack of support at T Mobile Stores

My whole family are BB users. Wanted to upgrade. Went to 2 T mobile stores in NJ. First Rep couldn't use the phone. Stated didnt know how. 2nd store said BB was locked up and couldn't take it out. Then said "Honestly not many of our employees like the BB so not many know a lot about it". So discouraged! 4 upgrades that may now go to I phones. Blackberry should be outraged by T Mobiles lack of knowledge and support of this new product.

Or maybe TMO should be outraged? Consider...BlackBerry has already made their money selling to TMO...now it's up to TMO to sell to end users and make their profit.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Icon user here chiming in on lack of support from Verizon

As everyone else, I've been waiting patiently for Verizon to release the 8.1/Cyan update for the Lumia Icon since JULY. I've shared the same frustrations that have been expressed on this forum countless times over the past months, but never felt the need to chime in until now.
I've been a Verizon customer for around 5 years, starting with a Windows Mobile Omnia 2 and later going through an HTC Trophy, a Lumia 928 and now the Icon (since March). In all cases save for the 928, Verizon's support has been anywhere from non-existent to downright ignorant (Omnia 2 suffered from countless issues network connectivity-wise, which Verizon never managed to solve, Trophy never received the WP 7.8 update, and the Icon not only has been waiting for the 8.1/Cyan update for several months, but also got discontinued in about half a year after release. 928 at least received the Amber update in a timely fashion, but of course has also suffered from the same lack of support that the Icon owners have gone through.) To add insult to injury, Verizon has also offered far fewer options for Windows Phones over the years than other carriers have.
Despite all of these issues over the years, I always justified staying with Verizon due to my perception that their coverage was unparalleled. As I'm in the military and thus move around a lot, this was very important to me. So much so that I even chose to upgrade to the Icon instead of switching to AT&T despite currently being stationed in WV where Verizon doesn't even operate it's own network, causing me to have serious connectivity issues all over the place. I figured I'm only gonna be in the area for so long, and when I leave for some other assignment, I'd be glad I stayed with the superior network.
Well, times have changed. First of all, when I first signed up for Verizon, AT&T's network (at least in the areas where I worked at the time) had a very poor reputation. Now, five years later, I've been hearing nothing but good things about them. Supposedly Verizon's network is on average a bit faster, but coverage and reliability-wise they seem to be very close. As long as I can get a decent signal wherever I go, I really don't care if my speeds are a little bit slower. I'll use my computer and ISP for anything that requires high speeds.
I was still willing to give Verizon a pass on the delays with Cyan as long as they released it by the end of the year, but my eyes were opened by two events, one of which just happened today. First, was the very abrupt discontinuation of the Icon, THE flagship Windows Phone device. Then today I walked into the Verizon corporate store in Petaluma, CA (currently training in the nearby area) asking if they had any information about the timeline for the Cyan update. The guy at first seemed friendly and went into the back to talk to someone with more knowledge on the matter. He then came back and told me the most far-fetched line yet. He said Microsoft was discontinuing the Lumia phones and going forward was only going to provide updates to the HTC and Samsung models. Whatever the case, Verizon was not responsible for the updates. I couldn't help but laugh at the absurdity of this nonsense, and told him No, Microsoft bought Nokia, and the Lumia devices were simply being rebranded as Microsoft. In no way shape or form are they being discontinued. Well, he must have been insulted by getting corrected, because he then said to me and I quote: "I don't know, why don't you just go read about it on the internet then.", and began to walk away.
I have come to realize I've been putting up with Verizon's ignorance and lack of support of the Windows Phone platform for half a decade because of an illusion of supposedly better service! After all this time they haven't changed their ways and show now signs of changing. Sticking with Verizon is only going to result in more headaches, delays and disappointments. After my encounter with the representative in the previous paragraph, I stopped him and asked to talk to the manager, because I wanted to make sure I was getting the most authoritative answer I could get to my next question. I wanted to confirm that as a Verizon Edge customer, if I paid off my device in full, I could leave their network for another provider at any time (somehow I overlooked this fact when I signed up in March. I chose Edge simply to give me more flexibility with upgrading my phone), and she confirmed this was the case.
So to conclude, I have decided to wait until the end of the year. If by then Verizon has not at the very least provided a firm date for my Lumia Icon to receive the Denim (yes, Denim. After all this time, only updating to Cyan is not going to redeem them in my eyes) update, I will pay off my Icon, and switch to AT&T. Quite frankly, even then I think there is a high chance I will end up switching after my phone has been paid off in the normal timeline, because I feel there is no basis for me to trust Verizon with behaving any better in the future, but if they want to have any hope of me staying on as a customer, I better have a firm date for the Denim update by 2359 on 31DEC2014. I can understand delays, but I will not stand for Verizon's lack of communication to their customers. In the end I will vote with my wallet.

Here you go I found an ONLINE copy from MS. I highlighted the subsection in red. Just that section right there does not guarantee you will have a warranty as long as the DP is installed.
7. Disclaimer of warranties
General. To the maximum extent permitted by law, the Deliverables are provided to you “as is” and with all faults. You bear the entire risk of using the Deliverables. Except as provided herein, Microsoft, on behalf of itself, its licensors and its suppliers, expressly disclaims all other express, implied, or statutory warranties. This includes the warranties of merchantability, fitness for a particular purpose, title and non-infringement. Microsoft, its licensors and its suppliers do not warrant that the Deliverables are error free or that operation of the Windows Phones will be secure or uninterrupted.
INSTALLING WINDOWS PHONE SOFTWARE ON A WINDOWS PHONE THAT YOU OWN.
BY INSTALLING WINDOWS PHONE SOFTWARE UPDATES AVAILABLE THROUGH THIS PROGRAM, THE FOLLOWING MAY OCCUR:
YOU WILL LIKELY VOID ANY APPLICABLE OEM, ODM OR MOBILE OPERATOR WARRANTY FOR THAT PHONE.
YOU MAY CAUSE IRREPARABLE HARM TO YOUR PHONE, INCLUDING LOSS OF ALL DATA. DATA INCLUDES SMS MESSAGES, GAME INFORMATION AND APPLICATION INFORMATION, AS WELL AS MUSIC, VIDEOS, PHOTOS AND EMAIL. ADDITIONAL DATA NOT LISTED HERE MAY ALSO BE LOST.
YOU AGREE TO WAIVE ANY SUPPORT FOR YOUR WINDOWS PHONE FROM THE MANUFACTURER OF YOUR WINDOWS PHONE AND MOBILE OPERATOR OF THE NETWORK THAT YOUR WINDOWS PHONE WORKS ON. YOU AGREE TO WAIVE ANY RIGHT TO RETURN YOUR WINDOWS PHONE TO YOUR APPLICABLE OEM, ODM OR MOBILE OPERATOR.

Shocked by lack of interest in buying my Power PC or Mac Pro

This isn't really meant to be a question, but rather a statement . . . of astonishment.
I guess I'm like, waaaaaay out of touch, but has it reached the point where desktop computers are pretty much obsolete? I guess I'm not talking about iMacs so much, but the towers -- The G5 and the Mac Pro.
I have a fantastic PPC G5 tower with googolbytes of HD space and RAM, with a fantastic graphics card yada yada but I just can't even seem to GIVE it away.
How can it have come to this?
I mean, I love my MacBook Pro and my MacBook Air and my iPad. But they are completely different animals to my PPC and my MacPro (I have both -- the MacPro is running an Intel chip and the PPC is running, well, a PPC chip.
But I can't seem to drum up even a yawn when I post either of them for sale on my local classifieds site. I mean, we're talking boxes that have at least $3-4,000 invested in them, being completely ignored at $300!
I mean, I love my MacBook Pro, but I can't imagine power-editing videos with FCP and dealing with multi-gigabyte files on it. Not even mentioning the lack of screen space . . . but what is the "new" setup for the pros these days? Is it multi machines -- one MacBook Pro surrounded by two vast monitors, or one iMac flanked by 30" screens . . . what is it nowadays?
I hear not a peep from any media whatsoever about Mac Pros and the next generation of monster tower computers . . . is Apple phasing these things out?
It sure would appear so. It would also appear that I am now the proud owner of two huge paperweights.
What's up?

Steve Jobs foresaw the end of the desktop era a few years ago, though he said desktops will still remain viable and available for specific purposes, much as trucks are designed for different purposes than cars. Desktop PCs have generally been on the decline for at least the past couple of years. By and large people don't want them any more. The market has expressed a clear preference for small, portable, reliable devices to tweet, text, and otherwise waste time.
No one is going to pay much for any PowerPC Mac. Unless they are already using one to perform actual work and has an unexpected failure, they are going to upgrade.
If you want to get the maximum resale value for your G5, clean it up, repackage it in its original box, install its original OS, include the discs and original documentation, write a good description and include clear pictures. What you get for it, you get.
The market is the ultimate judge of a thing's worth. People are not going to pay much for a platform that has been obsolete for seven years. Eight years is just about the limit of economic life for any Mac. It has been that way since about 1984.
For those of us who need to use more capable machines to perform actual work, any Intel Mac will far exceed the capability of any PowerPC Mac. If an iMac's limitations are insufficient for your needs Tim Cook alluded to new Mac Pro models being introduced sometime this year.

TransferHandler.importData() lacks generality

Similar Messages

Maybe you are looking for