Transfering a bitmap using the Jco

Hello all,
I have to transfer a bitmap using a Jco-Server. It has to be uploaded to the BDS. I found one similar forum-post for that and programmed it in that way. Everything works fine when I'm using the GUI_UPLOAD-Function. If I try it with the Jco SAP won't recognize the picture.
I send it in a Table (one 128 RAW column). Unfortunatelly SAP somehow doubles the size of the picture. I think, that that's the Problem. It could be, because of our System. We're using an AS/400 with EBCDIC-Codepage and SAP 4.6C. Do I have to encode it to BASE64 first?
Did anyone ever had a similar problem and nows how to fix it? Or does somebody has an example for that?
Thanks a lot for your help!
Regards
Patrick

Check out service.sap.com/connectors

Similar Messages

Export data for the table of SAP using the JCO

Good Morning,
Sorry error of the agreement, and that I am using a translator.
I am needing of help, to solve a problem that I have to integrate the system in Java using the SAP JCO.
Well I need send (Export_Parameter) data into a table in SAP,but I do not know this process.
If someone went through that and can help, thank you in advance
Obs : Not found documents that help me
Att
Elton C.

This is a forum for problems with the Java language and the default libraries that come with it. We can't help you with any third-party applications/libraries such as SAP and JCO.
Sorry.

Does Multithreading for file transfers work when using the WebDAV protocol?

I am looking at recommending an upgrade from CS5.5 to CS6 for my job, but I am wondering if our server system will be able to use the multiple file upload and download feature new to CS6. If this is not available for WebDAV then there is not much of a point on the Dreamweaver side for us to upgrade.
Thanks

From the documenation:
http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7eb4a .html
"Background file transfer works for all of the transfer protocols supported by Dreamweaver: FTP, SFTP, LAN, WebDAV, Subversion, and RDS."
Get the 30-Day trial to compare features.
Nancy O.

Unable to use the JCO 2.1.8 to connect with windows 32 bit landscape

We are currently having SAP ( ECC 6.0 ) version running on Linux 64bit environment. The external system (SRE) is using a windows 2003 . We are not able to communicate / send or receive the data from SAP to edge system.
Is there something we are missing?
Any configuration we need to do explicitly? Have someone installed / Used in such landscape?
The external system is a 32bit architecture.

Could you please specify the error message displayed. And what does VMC stands for?
~ Madrid
http://hrivera99.blogspot.com/

Additional runtime license fees per user in order to use the Java connector

Hi All,
I have one question.
Do we require to pay additional runtime license fees per user in order to use the Java connector (Jco) supplied by SAP?
We're currently not using the Jco but are looking into the possibility of using it.
Thank in Advance.

Hi All,
Please answer my question
We need to use Jco to connect to our 4.6C SAP production system. We do not have Portal or any other components. It's just a plain 4.6C system, service pack level is 23.
We are currently paying license fees for using the system on a per user basis.
Thank You.

Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone...

Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone or in iTunes. Prior to the last update, this was always an option. I have also noticed that the Ringtones and Alert Tones are not showing up in my recent purchases as well to allow for me to place them back on my phone and there for require for them to be purchased again... Any help would be greatly appreciated!

I've discovered that all tones purchased will be downloaded as ringtones, BUT they can be utilized as tones and assigned as alert tones on the iPhone...

Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.

Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

I used the migrator utility to transfer music and picture from my old PC and now I have 2 accounts on my new Mac, how can I get back to one account and still have the music and photos transfered ?

I used the migrator utility to transfer itunes and photos from my old PC to my new Mac and ended up with 2 accounts on my new computer. How do I transfer the music and photos and only have the 1 account on the new Mac ?

That's not easy. The Windows migration tool makes a new user account, and you can't prevent it.
You may be able to transfer what you want manually, but it's not quick or easy. See Transferring files from one User Account to another.

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

I recently used the migration assistant and now my music has not transferred and it wont play, any ideas on how to get all my music and films to actually work?

Hello,
I recently used the migration assistant on my old macbook air to transfer my data to my new macbook pro, yet it seems that my music and Films have not fully transferred over. i have used macs for a while now and haven't had any problems before, yet now itunes has the names of my music and films yet it can't locate the original file. any ideas on how to get this fixed? i don't want to buy all my music and films again.
Help?!
Thanks

Did the original files actually transfer? They would be in Music>iTunes>iTunes Music. You may just need to rebuild the library if the files are in that folder.
Clinton

Do I need a destination for the use of JCo?

Hi.
I want to use JCo for a connection between EP7 and ECC6. What I want to do is to use JCo to create an IDoc.
Should I use a destination when creating the JCo client and if so, how do I create the destination? In all examples I have found the destination is for the backend system to communicate with the portal, but I just want the portal to communicate with backend, nothing else.
After logging in to Visual Admin going to "Server > Services" should I then go to "Destinations" or to JCo RFC Provider? I have most often seen the latter and to me that seems to be about a JCo in the other direction than I am interested in.
"Destinations" seem to be the more proper one also regarding the attributes you set but I can't find any documentation for this.
Does anyone know which one to use in the case portal to backend communication and how to configure it?
Regards
Benny

Hi,
you can create this kind of JCO connection in the Webdynpro Content Administrator. This is reachable from the j2ee startpage under "Web dynpro tools"
Regards,
Jozsef

Using the Firewire power cord for transfers

I have a 20 GB, fourth generation, iPod. It came with a USB adaptor for transfers and a firewire adaptor for charging. The firewire cable plugs into a charging block which connects to an electrical outlet. Is it possible to disconnect the firewire cable from the charging block and use it as a normal firewire cable for transfers? I ask because I have a front mounted Firewire port on my PC, but no available USB port. TIA
20 GB, fourth generation Windows XP Pro

Semantics? Well not really. If you ask a question
here about a usb adaptor, others will think you are
referring to the power adaptor, not a usb cable which
"connects" a usb port to a dock connector rather than
"adapts".
Yes, semantics. And yes, the Firewire to iPod dock connector, and the USB to iPod dock connector are, in fact, adaptor cables. Just because Apple may not use the term doesn't change what they are. Even Apple refers to their power adaptors as "power adaptors", or "charging blocks", USB or not. I never used the word "power", when referring to them so "adaptor" still applies.
Do a search for USB adaptor cables and you will find quite a diversity of products yet few, if any, include any form of power supply.
There are 4 pin and 6 pin firewire cables. Apple
provides the 6 pin variety which transfers both data
and power.
You do have the 6 pin port on your computer?
Of course.

Qeury not using the bitmap index

Hi,
Pls have a look at the query below:
SELECT
A.flnumber,
A.fldate,
SUBSTR(C.sec,1,3) sect,
D.element,
C.class,
SUM(C.qty) qty,
A.indicator,
DECODE(A.indicator, 'I', B.inrt, 'O', B.outrt, 'R', B.rting, NULL) direction,
B.rting
FROM
Header A,
Paths B,
PathData C,
ElementData D
WHERE
(D.category='N') AND
(A.rt=B.rt) AND
(C.element=D.element) AND
(A.fldate=C.fldate AND
A.flnumber=C.flnumber) AND
C.element IN (SELECT codes FROM Master_codes WHERE type='F')
GROUP BY A.flnumber,
     A.fldate,
     SUBSTR(C.sec, 1, 3),
     D.element,
     C.class,
     A.indicator,
     DECODE(A.indicator,'I', B.inrt, 'O', B.outrt,'R', B.rting, NULL),
B.rting
UNION ALL
SELECT
A.flnumber,
A.fldate,
SUBSTR(C.sec,1,3) sect,
D.element,
C.class,
SUM(C.qty) qty,
A.indicator,
DECODE(A.indicator, 'I', B.inrt, 'O', B.outrt, 'R', B.rting, NULL) ROUTE_direction,
B.rting
FROM
Header A,
Paths B,
PathData C,
ElementData D
WHERE
(D.category='N') AND
(A.rt=B.rt) AND
(C.element=D.element) AND
(A.fldate=C.fldate AND
A.flnumber=C.flnumber) AND
C.element NOT IN (SELECT codes FROM Master_codes WHERE type='F')
GROUP BY A.flnumber,
     A.fldate,
     SUBSTR(C.sec, 1, 3),
     D.element,
     C.class,
     A.indicator,
     DECODE(A.indicator,'I', B.inrt, 'O', B.outrt,'R', B.rting, NULL),
B.rting
The cost in the explain plan is very high. The table PathData* has 42710366 records and there is a bitmap index on the flnumber_ and fldate* columns. But the query above does not use the indexes. The other tables in the list are fine as their respective PK and indexes are used but the table PathData* is going for a "Table Access by Local Index Rowid". dont know what it means but the cost for this is 7126 which is high. I cant figure out why is the query not using the bitmap indexes for this table.
Pls let me know what should be done.???

Thread: HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting
SELECT a.flnumber,
       a.fldate,
       Substr(c.sec, 1, 3)       sect,
       d.element,
       c.class,
       SUM(c.qty)                qty,
       a.INDICATOR,
       Decode(a.INDICATOR, 'I', b.inrt,
                           'O', b.outrt,
                           'R', b.rting,
                           NULL) direction,
       b.rting
FROM   header a,
       paths b,
       pathdata c,
       elementdata d
WHERE ( d.category = 'N' )
       AND ( a.rt = b.rt )
       AND ( c.element = d.element )
       AND ( a.fldate = c.fldate
             AND a.flnumber = c.flnumber )
       AND c.element IN (SELECT codes
                         FROM   master_codes
                         WHERE TYPE = 'F')
GROUP BY a.flnumber,
          a.fldate,
          Substr(c.sec, 1, 3),
          d.element,
          c.class,
          a.INDICATOR,
          Decode(a.INDICATOR, 'I', b.inrt,
                              'O', b.outrt,
                              'R', b.rting,
                              NULL),
          b.rting
UNION ALL
SELECT a.flnumber,
       a.fldate,
       Substr(c.sec, 1, 3)       sect,
       d.element,
       c.class,
       SUM(c.qty)                qty,
       a.INDICATOR,
       Decode(a.INDICATOR, 'I', b.inrt,
                           'O', b.outrt,
                           'R', b.rting,
                           NULL) route_direction,
       b.rting
FROM   header a,
       paths b,
       pathdata c,
       elementdata d
WHERE ( d.category = 'N' )
       AND ( a.rt = b.rt )
       AND ( c.element = d.element )
       AND ( a.fldate = c.fldate
             AND a.flnumber = c.flnumber )
       AND c.element NOT IN (SELECT codes
                             FROM   master_codes
                             WHERE TYPE = 'F')
GROUP BY a.flnumber,
          a.fldate,
          Substr(c.sec, 1, 3),
          d.element,
          c.class,
          a.INDICATOR,
          Decode(a.INDICATOR, 'I', b.inrt,
                              'O', b.outrt,
                              'R', b.rting,
                              NULL),
          b.rting Edited by: sb92075 on Mar 13, 2011 7:58 AM

[svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

Revision: 13113
Revision: 13113
Author:   [email protected]
Date:     2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
    osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

I am having trouble transfering any media from my windows 7 pc to my iPad 3. Currently using the latest version of iTunes n my windows pc but still the media won't appear on my devicewhen being transferred..

The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
Even though it's about a different application, I'd try the following document with that:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
(Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

Transfering a bitmap using the Jco

Similar Messages

Maybe you are looking for