Transferring drivers over to new install

Hi!
I'm a recent switcher (5 months), and since I've moved to OS X, I've installed, and subsequently uninstalled, untold piles of crap. Therefore I've decided that together with the external enclosure I'm getting for one of my hard drives, I'm going to do a fresh install.
However, my printer isn't supported my OS X. To get it to work, I had to install Xcode and use the Terminal to run some sort of Linux driver.
Because I plan on keeping my new install as lean and clean as possible, I'd like to avoid all the tedious mucking about in Xcode and simply copy the driver over. Is this possible?
The printer in question is a Minolta 1350W, and it's using the 13xx linux drivers.
Thanks
hudgie

Do you know where (all) the file(s)
are?
> That's what I want to know. Where are drivers kept?
And is it possible to just transfer one from one
machine to another?
You really have to look at the source code package to determine where files will be installed when you do your own compiling. The usual install directories are /usr or /usr/local. It should be noted that you may have changed the default location when you built the driver.
I took a short look at the source code. Running a "./configure --help" includes the following --By default, `make install' will install all the files in`/usr/local/bin', `/usr/local/lib' etc. You can specify an installation prefix other than `/usr/local' using `--prefix', for instance `--prefix=$HOME'.After a quick "./configure" and "make" followed by a "make -n install", it appears that files were installed in /usr/local/bin and /usr/local/man/man1. I didn't do a full make install and check for all the files that would be installed and I may have missed other files that were installed somewhere in the /usr/local tree. There may well have been more than one file placed in each of the directories such as /usr/local and /usr/local/lib.
It does not appear that a PPD was generated during the build. I am assuming you used the PPD from the linuxprinting.org site. That PPD will be whereever you manually placed it.
To be sure you get all the files installed, it would indeed seem easier to install XCode and rebuild the package. XCode has a convenient uninstaller in /Developer/Tools. I think you will actually spend less time going this route than searching all over the indicated directories trying to determine which files you need to transfer.
Matt
Mac Mini G4; B&W G3/300

Similar Messages

Drivers trouble in new installed windows 8.1

hi,
I have a problem with toshiba c55-b5362 ,
the original windows of this laptop was windows 8.1, but there were some problems with installing softwars like autocad, ... even playing videos, so my brother installed windows 7, (without following instructions or anything) and in windows 7 , nothing worked properly, so we installed windows 8.1 again! now problems are there, i downloaded the Intel Chipset SW Installation Utility, intel wireless, intel proset, ... just to be enable to connect to internet through wifi, but no success! after trying to install drivers that is the error that we see on the screen!

Satellite C55-B5362
Downloads here.
in windows 7 , nothing worked properly
There appear to be plenty of drivers and utilities to support 64-bit Windows 7 at the download site above. You will need essentially all of them for the laptop to perform as designed.
The installation order matters. Be sure to install the Intel chipset driver followed by the Intel display driver prior to any other driver. Install the TVAP before any other Toshiba utility.
-Jerry

TS3899 just got my 5c transfered everything over to new phone but my mailis not connecting

just synched old sim to new sim for new phone but cannot get into mail please help

I think you may have the process confused. You do not sync anything to do with the SIM. If you sync your phone via the iTunes process and sync over the email settings, the one thing that does not sync is the password. You need to go into the mail accounts in settings and enter your password. To receive mail, you need to go into the Incoming Mail server settings, to send mail, it is the outgoing or SMTP server. Did you read through the support document that you linked to the forum with?

Recently bought new macbook pro , transferred data over and thought microsoft office would work on new laptop. Icons are there , although don't have my key codes!! should i just buy new software package ?

recently bought new macbook pro , transferred data over and thought microsoft office would work on new laptop. Icons are there , although requires key codes and I don't have my key codes anymore as dog chewed the packaging!! should i just buy new software package ? I am told that this is a microsoft issue not a mac issue !! But all my other data on the old macbook pro transferred over even the icons for office for mac on the bottom app bar. only now I can't open any of my word or excel files without key code! I thought that there may have been something that could be done before having to bite the bullet and fork out for new software package.??

If this is Office for Mac 2011 then it will work on your new computer. Reinstall it. If you don't have the key code call Microsoft's activation line to get a new key code. Explain that you lost the original key code and want to install Office on your new computer.

My computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

my computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

Unfortunely, all movies and songs purchased in iTunes will be lost...you'll have to purchase them again! Any applications you've purchased, you can download again for free.
Music Rescue is a program you can use to transfer any and all data (music, movies, pictures..) from your iPod to your computer, and iTunes.
http://www.kennettnet.co.uk/products/musicrescue/

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone.

Using Itunes, I copied all my apps from my Ipod touch to a new Iphone 4. Problem is all the apps on the Iphone are starting up like a new install. I would think my "password" app and "lose it" app would have the past data transferred to the Iphone. Is this not possible??

Try this Discussion...
https://discussions.apple.com/message/19529357#19529357

How to Install Latest SB Live Drivers Onto New Install of

I upgraded to a new motherboard and CPU and have just installed a fresh new copy of Windows XP on the machine. I haven't plugged it in yet, but I will be installing a SB Li've Value CT4830.
In preparation for installing this card, I tried to download the latest drivers, but the web site says that in order to install the latest driver, I must already have the driver from July 2002 installed.
Where can I get the July 2002 driver? It can't be on my original CD since I bought the card before 2002.
I am trying to do a minimal install of drivers, and do not need or want to install any non-essential appliction software, unless its necessary to get surround sound.
If it matters, XP Service Pack 2 is installed.Message Edited by anthonyanthony on -25-2004 02:25 PM

Bif
Same thing here with me. I recently got a new system but kept my Soundblaster
card (Li've Platinum 5.) and with it a fresh install of XP SP2. I knew I would
have to use the Li'veDrvUni-Pack(ENG).exe driver update because the origi-
nal CD could not be used (same as you). So I was doing a fresh install of the
Li'veDrvUni-Pack(ENG).exe with no pre-existing Soundblaster stuff installed (save
for the XP Soundblaster drivers).
So here is what happened:
* ran Li'veDrvUni-Pack(ENG).exe; did the typical install
* sound is ok -- however, I ran the diagnostics and the mixer, soundfonts, and
one other one (the last item, forgot which one it was) failed
* tried to start the mixer to verify the mixer failure and the familiar "CTDevcon.dll
has failed" message came up
I have had this happen to me before in trying to install the Li'veDrvUni-Pack and I did
manage to get everything working again but I forget how. I believe it involved running
the CTzapxx program which I did try but XP keeps on putting in the default Sound-
blaster drivers after rebooting. I think this might be the problem (the fact that the
default drivers keep on getting installed) but I can't remember how to get around it.
Moderators/experts/technicians -- any ideas?
DarkO

Missing cd/dvd drivers on new install of win7

I have a HP EliteBook 8460p. Replaced the faulty hard drive with a new Hard drive which was sent by HP. Tried to do a new, clean install ofWindows 7 Pro but I keep getting an error that says "a required cd/dvd device driver is missing". I have read some HP support forum where i need to download Storage Controller Driver http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/missing-cd-dvd-drivers-on-new-install-of-win7/m-p/2411307/highlight/true#M9718 I'm unable to find the Storage Controller Driver, Can some please forward the link to downloadhttp://h20565.www2.hp.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=5056942&sp4ts.pn=SN188UC&sp4ts.sn=CZC2141VHC

Hi: I think that is the problem then. Hopefully you can find the W7 pro version you need at the link below. SP1 Media Refresh are the newest files. http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languages-X86-amp-X64/page60?p=470600&viewfull=1#post470600 Then use this tool to make the file bootable onto a 4 GB USB flash drive or a DVD. http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool It is very important to check to make sure the file that you downloaded reports the same size as what it was advertised to be. For example, some members have gotten a "Download Complete" message but only part of the file was actually downloaded (like 2 GB out of 3 GB).

How do I install dell v305 print drivers on my new macbook pro?

how do I install dell v305 print drivers on my new macbook pro?

Dell's drivers are only for Windows. If you can find out who makes the printer and what model it is, then you may be able to find OS X drivers for it. Or you can see how well it works using the Generic driver.

I bought a new computer, and when transferring over to new computer, forgot bookmarks, now I can't find them on my old computer!

We bought a new computer, and somehow bookmarks did not transfer to new computer, and now i cannot find them anywhere!

at the end of the article Ed mentioned is
* [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox - MozillaZine Knowledge Base]
I actually copied most of my user application data from my old system to my new system and that includes all of my Firefox profiles. If I just wanted one profile, I would create the new profile on the new system and copy the old profile into it as I have much too much in the way of modifications to risk losing. as opposed to copying just a few files to the new profile.
Since it appears you only want/need your bookmarks file, then assuming your old system is operational and was using Firefox 3.0 or higher,
bring it up type in about:support or use Help -> Trouble Shooting Information then click on "Open Containing Folder" You will find your old places.sqlite file there or you can restore the latest .json file from the bookmarksbackups directory with the help of a USB thumb drive.
The places.sqlite file would be copied into your new profile with Firefox down and check the Windows Task Manager's Processes Tab to make sure firefox.exe is not running (Window's 7 only keyboard shortcut is Ctrl+Shift+Esc).
If you restore a bookmarkbackups .json file you would do that with your new Firefox open and through the Library list ("Ctrl+Shift+B") then "Import and Backup" on the Library menu bar, then "Restore" then "Choose File" the restore will go very fast.
Since you are going to a new system and both Firefox 4 and Windows 7 may both be new to you, and I would suggest checking out the following two articles where you may find solutions to some of the problems with each, or how to work with them.
You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
[http://dmcritchie.mvps.org/windows-7/win7.htm Windows 7 Home Premium]

Bluetooth driver fix needed for Windows 8.1 new install

I recently did a clean install on my Lenovo Thinkpad T61P of Windows 8.1. Bluetooth is missing in PC Settings but does show up in services and it is enabled and set to automatic. Don't think that matters as the program or drivers are missing. Can someone direct me to the proper download link to get this installed and showing up in PC Settings so I can get it running? I cannot find proper download to install and this is a well known issue as I have upgraded from a XP system.
thanks in advance

thanks for replying. As I was waiting for some answers to how to fix this bluetooth issue, I was continally bombarded with this popup window for time and date per the side window screen when you scroll over by it. I tried fixing it and decided to go into the mouse properties in Control Panel, went to mouse, and then into Ultranav. I unchecked the second feature that evidently froze my cursor, and now I have no cursor at all. I have booted up and as soon as I enter my login pin, I lose the cursor. I have tried system restore but it wants my anti virus disabled and I have not been able to do it. I have gone bake into the same settings feature to enable, but as soon as I do, it immediately transfers me out of the Ultranav properties menu.
Short question, Can I boot load the new driver into this OS that it needs? I do not see this driver as a property for my touchpad. I suppose I could get a mouse and try it, but do not have the USB end for the ones I have. Any idea how to get this Ultranav driver loaded without any cursor? I have no idea and system restore does not work without disabling antivirus and I cannot do this without cursor. Tried to boot to safe mode but I have not been successful as I don't know how evidently. Any suggestions would be appreciated then I will get back to you on the bluetooth issue.
thanks
edit to say I found a laser mouse and inserted it and it did get my cursor back. I have not disabled antivirus and doing another system restore. Two points come up as a result of this. How do I disable my antivirus using Windows 8.1 on a laptop that does not have FN + F8 option? Is there a file you can install to get this nice bootup option to work?
Second. is it possible to put a shortcut on the desktop or startup page for system restore. Maybe it is in the programs section as I just now thought it may be there but can't look right now as doing a system restore.
Finally if anyone can tell me the current drivers to download and install for a Lenovo T61P using Windows 8.1 for the updated Ultranav files and also the bluetooth recognition file. I will get back and answer your questions on what is seen as soon as I am up and running again, which should be shortly.
And if anyone has the answer to disabling the popup date and time window in lower left hand corner when the charms menu is activated, I would greatly appreciate it as this drives me crazy. this is how I got all these things messed up to begin with.
thanks and I hope this is not confusing.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Error 6 - Transferring Photoshop CS4 to new macbook pro

I'm in the process of changing transferring everything over to my new Macbook Pro. I uninstalled photoshop CS4 on my old laptop but when I tried to install it on this laptop a box popped up saying I needed a certain Java application (can't remember which) which it searched for and downloaded for me but after it finished and I clicked to install CS4 it said that my computer needed to be restarted and if that didn't solve the problem to contact support and let them know I have an error 6. Hoping someone can help me out. Thank you in advance!!

Try downloading a fresh Mac CS4 installler.
Use the CScleaner tool first before installing, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS4 products Have your serial number ready.

Transferring stuff to my New Macbook Pro

I just recently bought a Macbook Pro 2.4 GHZ 2 GB Ram 15" and I had a question about transferring stuff to my new computer. Such as Safari tabbing through everything, Front row being choppy with videos and MS word and excel documents not being read.
I used to have an iMac G5 17" 1.9 GHZ and there were several problems with it's software. Now that I've transferred all my stuff to my Macbook Pro, I'm worried that the problems that plagued my iMac followed and that my computer will run slow despite having 2 GB or RAM.
I'm not too sure what I should do. Should I keep my MBP the way that it is now and keep all the transferred items on it? Or should I reinstall the OS with the disks that came with it and just transfer over my music and my applications via the iPod and reinstall?
Thanks in advance!

Apart from potential stability and performance issues, one big problem I have with the Migration Assistant is that one is really not to know exactly how well their new system is supposed to perform. While sure, using the MA can be far quicker and more convenient although there's a lot to be said for know exactly how your system is "supposed" to perform. By clean installing all of your software and manually transitioning one's data you get that.
If you go to the Xbench results page and look at the wild variance in system performance for any one model you'll see there are swathes of users out there that have no idea their systems are under-performing.

New install of Crystal 2013 Server; getting errors

New install of Crystal 2013 Server on Windows 2012R2 Server
In the Connectivity Services; the ConnectionServer32 shows a state of Initalizing, and Disabled
In the Crystal Report Services; the CrystalReports2013ProcessingServer shows a state of Running with errors and Disabled
In the Crystal Report Services; the CrystalReports2013ReportApplicationServer shows a state of Stopped and Enabled
Hovering over Stopped I get "The Executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess error + 14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log."
Application Event Log Entry:
Log Name:      Application
Source:        BusinessObjects_cms
Date:          4/21/2014 11:43:12 AM
Event ID:      33017
Task Category: General
Level:        Warning
Keywords:      Classic
User:          N/A
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
Unable to contact server DBHTCRYSTAL01.ConnectionServer32 on machine DBH-TCRYSTAL01.sbcounty.gov to perform status notification. Please check the server's system log for errors.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="BusinessObjects_cms" />
    <EventID Qualifiers="0">33017</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T18:43:12.000000000Z" />
    <EventRecordID>32081</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security />
</System>
<EventData>
    <Data>DBHTCRYSTAL01.ConnectionServer32</Data>
    <Data>DBH-TCRYSTAL01.sbcounty.gov</Data>
</EventData>
</Event>
System Event Log Entry:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          4/21/2014 7:49:07 AM
Event ID:      10016
Task Category: None
Level:        Error
Keywords:      Classic
User:          SYSTEM
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}
and APPID
{AD65A69D-3831-40D7-9629-9B0B50A93843}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T14:49:07.818690400Z" />
    <EventRecordID>8228</EventRecordID>
    <Correlation />
    <Execution ProcessID="668" ThreadID="804" />
    <Channel>System</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Launch</Data>
    <Data Name="param4">{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}</Data>
    <Data Name="param5">{AD65A69D-3831-40D7-9629-9B0B50A93843}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
    <Data Name="param10">Unavailable</Data>
    <Data Name="param11">Unavailable</Data>
</EventData>
</Event>
I also have second Windows 2012R2 Server / Crystal 2013 Server install that is working just fine and the only difference is it is not a member of the Domain.
Barry Streets
[email protected]
510-238-2727 ext 2780

In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

Transferring drivers over to new install

Similar Messages

Maybe you are looking for