Transform Object w/out losing perspective? CS6

Hello: Level: Newbie OS: Windows 7 64bit PS:CS6
So, I have been searching the manual for the answer to no avail. Believe it or not I do often find what I need in the user manual. Just don't want you all to think I come run'n here first to have someone esle do my work/research )
Any way,
I cannot currently recall how ... but in Inkscape I remember that when I wanted to flip an object and it lost its shape that I could do something like go under Path and Convert to Object or something to that affect (I took Inkscape off my pc to make room or I would go check).
I made a Fork at an angle which I've decided I don't like (it took me forever to get it just right), and when I change its placement it looks quite odd and loses its proper perspective/shape.
Does anyone know what I am trying to say? LOL ...
Is there an easy fix to my problem?
Thank You for your time

Thank you Noel.
I will try that out & let you know how it goes for me. I think I'll give the Vanishing Point under Filter a go.
Also, I will come back 2mar'o & post a pic of the fork in the first perspective I made and then an other of how it looks when I try to move it to where I've decided I want it placed.
Too tired 2nite. Need a pc break
JJ, that's not actually what I need to accomplish but thank you for your time. But it's my fault. I should have mentioned that I am Rotating the Fork and when I do it loses it's shape.
Thanx again to you both
Here are two pics of the fork. The first is how I drew it with the Pen tool and the second is how it looks after I have Rotated it. I understand the Layer Styles don't look the same because it's at a different angle. However, I was just wondering if there's something I can do so that when I change an Objects angle it will retain its shape.
I suppose I may have to just redraw the fork at the angle I decided I want. I would use the path tool to move the handles around but while making this I was unable to use the Dodge or Burn tools unless I Rasterized the Layer. Is that "Normal" ??
Noel, I haven't had a chance to try out your suggestions yet.
As always, thank you for your time
Still haven't gotten to Noels suggestions but I will and will come back to let people know how things worked out. Just been super busy. In the interim and I just redrew the fork and changed the angle of the Gradient Overlay.
It may be a bit before I can get back but I will in case someone in the future has the same question.

Similar Messages

Change dimensions of .jpeg pic w/out losing perspective?

Hello: Level: Newbie OS: Windows7 64bit PS: Cs6
The picture below is a (sadly), .jpeg and I would like to be able to change its dimensions from 800X600 to 958x198
However, when I use Ctrl + T to change the size (of course), the sun (most of all) becomes an ellipse.
Is there a way that I can change the dimensions of this image without losing the perspective?
Like maybe a way to extend the clouds? I've read about the Clone tool but it leaves seams and aside from that it looks like the image belongs on Santas island of misfit images .
Any way, maybe what I am asking is not possible at all but I thought I would ask nonetheless. I've tried keywords up the wahzoo in the FAQ's & forum but have come up empty handed. So, I am thinking that maybe I am shoot outta luck.
As always, I appreciate your time and TY for reading my post

oooh ya, that's right
Thanx again Noel!
Hi Noel,
Hopefully you'll see this post. I'm sorry to bother you again. Even though the image you made is awesome and I beyond appreciate your kindness for sharing it with me I have been trying to make it myself. Or a version of it I should say.
I've done okay with the clouds and the sunbeams but for the life of me I cannot seem to get the sun part done. I've tried loads of different settings for the layer mode, brush mode etc. but I can't get close to the same Bright Glowing effect of the sun itself.
Would you be willing to share your mad crazy awesome skills with me so that I could create a sun like (or similar) to the one in the image I posted?
I have tried to find a/n picture/image of a lone sun in the sky to begin with but I haven't had any luck. I have also taken a few pictures myself but I only have an Iphone to take pics with and so my pics aren't very effective.
Gotta run for now. Thanx in advance for your time and help.

How to make an object getting out of the screen ?

Hello everybody !
I am creating a game introduction with Flash pro CS6 and here's is my problem.
I want a object in my animation to leave the screen, but I dont know how to do it.
Is there for example, a way to delimited the working area, so that when I make an object go out of this area, it does not appear in my final animation ( no matter the format, .avi, .mov, spritesheets ... ) or can eventualy be "cut" ( if I make my object half inside the working arear and half outside ) ?
Is there an other way to do this ?
Thanks !

Using a mask might be one way.

MIDI Transformer Object

Is it possible to have the transformer object in the environment combine a note and a MIDI CC value and output different notes depending on the range that the CC value falls into? I'm trying to convert the hi-hat output from my V-drums into several different notes. Hitting the hi-hat pad produces the note A#2 and moving the pedal up or down generates data on CC#4 (in order to gradually progress from open hi-hat to closed hi-hat.) Superior Drummer and other plugins support hi-hat CC data out of the box, but I want to use Addictive Drums which doesn't support this. Basically, I want to implement some simple if statements. So for example:
- IF incoming note = A#2 and CC#4 is between 1 and 30, output note X
- IF incoming note = A#2 and CC#4 is between 31 and 60, output note Y
and so on...
Is it possible to do this in Logic? If it can't be done with out of the box environment objects, is there any way to program objects for Logic, or MIDI plugins? I have plenty of programming experience but haven't been able to find much on extending Logic with MIDI plugins.

Again, the answer is yes. Unfortunately, as far as I know, you can't do this in one operation.
IF incoming note = A#2 and CC#4 is between 1 and 30, output note X
IF incoming note = A#2 and CC#4 is between 31 and 60, output note Y
Will have to be done along these lines.
transformer 1: Status = Note: Pitch = A#2: Mode = Condition splitter(True -> top cable)
top cable to transformer 2
transformer 2: Status = Control: Data Byte 1 >= 30 (whichever > means less than; (it's late)): Mode = Condition splitter(True -> top cable)
send the lower cable from transformer 2 to transformer 3
set transformer 3 as for transformer 2 except Data Byte 1 >=60
You could end up with quite a complex chain of transformers. Don't worry; if they are set up correctly, they will do what you want with little or no latency.
I have used these type of commands combined with delays to create a complete arrangement for piano, synths, bass & drums from a single note. It was an interesting exercise.
I hope this makes sense & that it helps you sort out your problem.

Error when transforming object data HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi
I am running on NW04s. Working on WD for ABAP Interactive forms. whenever I open the Adobe editor thru SFP or Se80, the editor opens up and I am able to do my operations. The moement I hit back button/Save or any other action which involves coming out of the adobe editor, it throws me an Fatal error - <b>Error when transforming object data</b>. I find that in most of the threads there are similar issues which are still open. Any Help would be appreciated.
I have installed ADLC 7.1, xACF04s.
Murali.

I did the same installation on another PC, and to my suprise it works fine. Looks very strange

Adobe Forms Error Message 'Error when transforming object data'

Hi,
When i tried to save(Adobe Forms) after making changes in Layout its giving an error message 'Error when transforming object data' and takes me out of the transaction. How do i solve this ? Can anyone help me out.
Thanks and Regards,
Franklin.

hi
I have the same problem , plz help me out
thanks

Transformer object problem

Hi, my first post!
I'm using a transformer-object in the environment to transpose
some incoming midi-notes in real time.
This works so far, but somehow, all the notes that are played, 'hang'
for some reason, like no 'note-off' command is been given.
Also, when a note is triggered, a second note is triggered at release and
being displayed in the matrix-editor.
Is there anyone who can help me out?
I'm stuck!

You can transpose incoming data using the playback parameters box by deselecting all regions to display the parameters for the MIDI thru and setting a transpose value. Might be less buggy.

Transformer object- fix note problem

Hi, my first post!
I'm using a transformer-object in the environment to transpose
some incoming midi-notes in real time.
This works so far, but somehow, all the notes that are played, 'hang'
for some reason, like no 'note-off' command is been given.
Also, when a note is triggered, a second note is triggered at release and
being displayed in the matrix-editor.
Is there anyone who can help me out?
I'm stuck!

How I'd probably tackle it is to filter out all the note offs from the input stream first, do my processing to modify/transform whatever notes etc I needed, and add back in the necessary noteoffs when I finally pass the converted notes to the instrument - this won't in general be a problem with drum voices because they largely ignore note-offs anyway, as drum voices don't generally respond to gate time.
That way I know I always have a matching note-off following a note, and it's easier than trying to process the note-offs separately to match your note on processing, and keep everything in sync.
To generate note offs for a note on event, pass your modified note-on only MIDI stream to a final transformer, and the use "copy matching events" in whichever order you need, leaving the note pitch to THRU, and setting the velocity to zero, so every incoming note will pass through the transformer, followed by it's associated transformed note off.
If you have problems setting this up, post back and I'll take a look...
Edit: Hmm, transformers won't let you fix a note velocity to zero, at least in LP8. That's annoying.
I know I've done stuff like this before - I need to wait until I've got some clear head time to look at this... I think I ended up converting notes into other data types before converting them back into notes, specifically to break Logic's attempt at handling notes atomically, but can't remember offhand...

Error creating transformer object after server up for 2-3 days

Our application performs various XSL Transformations and as such it needs to create Transformer objects to perform the transformations. All works fine for several days (usually 2-3 days) then we begin to receive this exception:
{color:#0000ff}java.lang.ArrayIndexOutOfBoundsException: 5
at net.sf.saxon.om.NamespaceIterator.getInScopeNamespaceCodes(NamespaceIterator.java:288)
at net.sf.saxon.tree.ElementImpl.getInScopeNamespaceCodes(ElementImpl.java:670)
at net.sf.saxon.style.LiteralResultElement.validate(LiteralResultElement.java:200)
at net.sf.saxon.style.StyleElement.validateSubtree(StyleElement.java:1234)
at net.sf.saxon.style.StyleElement.validateChildren(StyleElement.java:1263)
at net.sf.saxon.style.StyleElement.validateSubtree(StyleElement.java:1238)
at net.sf.saxon.style.StyleElement.validateChildren(StyleElement.java:1263)
at net.sf.saxon.style.StyleElement.validateSubtree(StyleElement.java:1238)
at net.sf.saxon.style.XSLStylesheet.preprocess(XSLStylesheet.java:705)
at net.sf.saxon.PreparedStylesheet.setStylesheetDocument(PreparedStylesheet.java:331)
at net.sf.saxon.PreparedStylesheet.prepare(PreparedStylesheet.java:163)
at net.sf.saxon.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:139)
at weblogic.xml.jaxp.RegistryTransformerFactory.newTemplates(RegistryTransformerFactory.java:173)
{color:#000000}It's a very odd problem. It doesn't seem to be an issue with memory as there is memory free and some XSL transformations still work okay. There doesn't seem to be an issue with any particular style sheet, it rather random. Once a style sheet starts to fail, it doesn't ever work. If I restart the application server everything is back to normal.
{color}
We use Saxon9 and we use WebLogic's XML Registry to configure our XML/XSL implementing classes. Here is what that looks like:
Name:SAXON
Document Builder Factory:weblogic.apache.xerces.jaxp.DocumentBuilderFactoryImpl
SAX Parser Factory:com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
Transformer Factory:net.sf.saxon.TransformerFactoryImpl
When To Cache:cache-never
Here is our WebLogic Information:
WebLogic Version:WebLogic Server Temporary Patch for CR328282 Thu Nov 08 13:39:13 EST 2007 WebLogic Server Temporary Patch for CR345092 Wed Oct 24 10:56:58 IST 2007 WebLogic Server 9.2 MP2 Mon Jun 25 01:32:01 EDT 2007 952826
Java Vendor:BEA Systems, Inc.
Java Version:1.5.0_10
OSName:Linux
OSVersion:2.6.9-78.0.8.ELsmp
{color:#000000}We upgraded from saxon8 to saxon9 in the hopes of resolving this issue, but we still get the same error message.
{color}
{color:#000000}I'm wondering if something is going on with WebLogic's XML Registry?
I've tried to cause this problem to occurr by stress testing the application, but no such luck yet.
Any ideas?
Thanks!
Paul{color}
{color}

We are facing a very similar issue. The ditto configuration and the same issue. This issue disappears when we recycle the weblogic.
Can anybody give me a reply if this issue was sorted out? Any help would be appreciated. Incase if this issue was solved somewhere in threads, please give me an idea. Thank you in advance.
Regards!!
Jai

Put old I life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

Diane,
Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
Next download iPhoto:
https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

I was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

i was using same id on 2 iphones with no problems suddenly everything got mess, how can i set a new id w.out losing my contacts?

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How can I sync my ipod 6g. to a new computer with out losing all the info

My computer is starting to fail so I bought a new one. How do I sync my ipods they are 6 gen to the new computer with out losing all the data that is on the ipod?

Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
If it was set to Manual, you have no worries. Just continue on your way.
If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

If i have already logged in my iTunes with my iPod and plugged that in, but now i have a new iPod and I want to plug that in to my laptop how would i do that with out losing anything on my new iPod and my old one. Both my ipods are on different accounts?

If i have already logged in my iTunes with my iPod and plugged that in, but now i have a new iPod and I want to plug that in to my laptop how would i do that with out losing anything on my new iPod and my old one. Both my ipods are on different accounts?

Nothing special. See:
How to Set Up Two iTunes Accounts on One Computer | Chron.com
iTunes: How to share music between different accounts on a single computer

My laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!

my laptop died, how can I plug my ipod classic into a new pc with out losing all my music, over 10,000 songs?!
Please help!

Was your iPod previously set up to Manually Manage (where you dragged/dropped the music) or was it set to auto sync (where it started sycning as soon as you plugged it in.)?
If it was set to Manual, you have no worries. Just continue on your way.
If it was set to Auto, you will have to transfer your purchases or redownload them from the iTunes store.
You're either going to have to get the other music back from the websites/CDs you got them from before or find an iPod ripping software program that will do it for you.

Transform Object w/out losing perspective? CS6

Similar Messages

Maybe you are looking for