Gray screen, flashing folder with ? In it....

I can't even power up my comp, why I try and turn it on, a gray screen comes up with a flashing folder that has a question mark in it. And ideas on solutions?! Thanks guys!!

"If you see a flashing question mark when you start your Mac, it's probably because it can't find the system software it needs to start up. Usually, all you have to do to get your Mac back up and running is remind it where its software is."
"If your computer starts up normally after a brief delay, you probably just need to reselect the startup disk in Startup Disk preferences. It's normal to see the flashing question mark when a startup disk has not been selected. In most cases, reselecting the startup disk is all that is required to resolve the issue."
Read this for more troubleshooting info: http://support.apple.com/kb/ts1440

Similar Messages

Gray screen, flashing folder with question mark

My macbook pro was working normal in the afternoon... I closed the computer lid and returned a couple hours later to a gray screen & flashing folder with a question mark. When I hold the option key down at startup I only get an internet recovery mode. I plugged in my airport time capsule and was able to boot from it. I used disc utility check and everything checked out ok. I used my ESET NOD32 Antivirus and it checked out ok. Finally, I went to start up disc and restarted my computer from the Mac HD. This also worked without problem. Afterwards I disconnected my airport capsule and restarted the computer as a final test. Unfortunately I am back to the flashing folder with a question mark. What do I do?

See:
A flashing question mark or globe appears when you start your Mac - Apple Support
Seems like your disk is failling.

HELP! Gray Screen & File Folder with Question Mark!

Hello!
If anyone can offer suggestions or if you've dealt with this before I would love feedback so that we can fix this problem!
I recently converted my husband from a PC user to a Mac user (it was a happy day). A little over 1 month ago we bought a brand new 20" iMac and since then everything has gone quite smoothly, he's even said how happy he is with the switch!
Then yesterday morning as I lay sleeping in the other room a noise similar to dial up internet woke me. I went into the office to find the internet up on the screen of our iMac, Firefox wouldn't shut down so I tried force quitting, but that too did not work. Finally I pushed the power button, and went back to bed.
A few hours later as I went to check my email I powered on the iMac and got a gray screen. Nervous, I turned if off, and then back on in safe mode. I still got a gray screen but now with a file folder with a question mark inside flashing at me. Thankfully we're within the 1yr. warrenty so we took it back and they're diagnosing the problem....but I'm worried about the outcome.
Has anyone else had this problem? What was the result? What caused it? We save most everything onto external hard drives (thankfully!) so it's not as if the machine was being overloaded. It kept making that weird dial up noise too... kind of a bleeb, fans running, trying to work noise. Obviously my husband isn't so thrilled with Macs now. Any help would be greatly appreciated!! Thanks!

Welcome to Discussions - you have an intel iMac, and this is the PPC G5 forum, but even so, I would first advise you to buy Apple Care before then first year of ownership is up.
Then, I would remind you that all electronics will fail at some point, but the exact point is unknown and sometimes is much sooner than it should be. It would be interesting to hear from you what the exact failure was, there do not seem to be many reports of intel power supply failures, that seems to have been fixed since the era of the G5s.
The flashing question mark is usually a sign that the hard drive has failed and drives can fail at any point, yours may simply have some bad sectors; it could also be the logic board and again, they fail, but usually not within the first three years. Your machine may have been defective to begin with, it certainly doesn't sound as if you have been abusing it, so do please let us know what the ultimate diagnosis was.

I can't log in to my computer- when it turns on it has a white/gray screen with a flashing folder with a question mark in it. What does this mean and how can I get it to stop to log in?

Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?

Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph

IMac won't boot and has flashing folder with question mark on gray screen

I just bought a new iMac. I have been trying all week (with no success) to transfer files and apps from my previous iMac. The last time I tried to transfer, I used target mode on the old computer. It looked as if it was finally working, so I left with 2+ hours remaining on the transfer. When I returned, the computer was frozen and nothing would work. So I held the power button to turn it off. When I tried to turn it back on, there was only a gray screen with a flashing folder with a question mark. I feel like I have tried everything listed in other discussions. The only thing I am not able to try is to reinstall Lion because the new computer did NOT come with an OSX disc of any type. Any suggestions?

Go to > OS X Lion: About Lion Recovery

Grey Screen with Flashing Folder with Question Mark

Hi,
I need some help with an issue I'm having on my Mid-2012 Macbook Pro (13"; OSX 10.9.2; 8GB RAM). I've had issues with this Macbook for the past year. I've worked with Apple Support and had it into the Mac Store prior to the warranty expiring (Dec 2013). I have the exact same model with all of the same specs that my employer purchased at the same time for work as my work computer, and I haven't had any issues with that one.
Previously, the system would slow down excessively and eventually start hanging. Occasionally the screen would start flashing. Apple phone support had me wipe the hard drive and re-install the OS and all of my file, apps, and setting from my Time Machine backup. That worked for about four months, and then it started again. Since it was getting close to the warranty expiration, I took it to an Apple Store. They ran a bunch of diagnostics, said the hardware was all fine but the OS needed to be re-installed. They did that in early Dec, and everything was cool again until about three days ago. Three days ago, it started slowing down and freezing again (even when doing non-memory intensive tasks such as broswing the web with only a couple of tabs open and no other applications open). Last night, it froze hard and wouldn't shut down, so I had to cold boot it. When I tried to power it back on, it came to the grey screen with the flashing folder with the question mark (which I know means it can't find the boot sector). I waited until this morning, and it stil wouldn't boot. I then rebooted into Startup Manager, and the HDD was there. I selected the HDD, and it booted fine and ran fine for a couple of hours (I was able to do a Time Machine backup). Then it froze up solid again. I waited for an hour or so before cold booting (don't like doing that), and when I tried rebooting, I got the flashing folder with the question mark. I tried booting into the Startup Manager again, but this time, my HDD wasn't listed. I then booted into the OSX Recovery utility (CMD R on boot), went into the Disk Utility hoping to do a disk repair, but my HDD wasn't listed. I have an external SATA to USB adapter, so I pulled the HDD, hooked it to a USB port on my other (identical except it doesn't have problems) Macbook Pro. Once my other Macbook booted, the HDD from the bad Macbook Pro showed up fine. I ran a verify and repair disk on the HDD from the bad Macbook, and it didn't show any issues.
So I figured I'd be really brave. I took the HDD from the bad Macbook Pro and put it in my work (good) Macbook Pro (I took the HDD out of my working work Macbook Pro). It booted fine. I then did the verify and repair disk (again no errors) and verify and repair permissions (it found a few, but no more than it has in the past). I ran it that way for about an hour with no issues. That led me to believe that the HDD for my personal Macbook was fine, and it must be an issue with the SATA cable or the mainboard.
Here's where it gets odd. I put the HDD from my work Macbook Pro into the bad Macbook Pro thinking it wouldn't even recognize it. It did recognize it, and it booted fine. I ran it like that for about 30 minutes. It did have a couple of short freeze ups, but it didn't lock up solid. I didn't want to push my luck and possibly damage the HDD for my work Macbook, so I shut down the bad Macbook Pro ended the experiment at that point.
I put the original HDD back in the Macbooks where they originally came from. I then ran the Apple Hardware Test (press and hold D on startup) on the bad Macbook Pro; I did the extended testing option. It ran for about an hour, but it didn't find any issues with the bad Macbook Pro.
I put the HDD from the bad Macbook back in my working Macbook and wiped the disk and reinstalled OSX from a Time Machine Backup from last week (before the problems occured). Put it back in the bad Macbook and still no luck. Finally I tried resetting the PRAM because I saw that as one of the options on this discussion board.
I've searched and read everything I can find related to this, but I can't find anything that works, and I'm at my wits end. Can anyone point me in a direction of what might be wrong and what else to try?
Thanks!
Mike

You performed thorough and methodical troubleshooting, and this appears to be the most important result:
I put the HDD from my work Macbook Pro into the bad Macbook Pro thinking it wouldn't even recognize it. It did recognize it, and it booted fine. I ran it like that for about 30 minutes. It did have a couple of short freeze ups, but it didn't lock up solid.
Given compatible hardware, you ought to be able to swap hard disk drives in exactly that manner, so it shouldn't surprise you that it worked. However, installing the "known good" HDD in the problem machine should not have resulted in any freeze-ups at all.
You can conclude the hard disks (both of them) are serviceable and whatever fault exists probably lies elsewhere. Often the SATA cable is damaged or not seated properly, and is likely to fail more than anything on the logic board. Inspect the logic board's SATA connections and make sure there are no contaminants or damage. The two drives and two logic boards are going to have slightly different component tolerances, so perhaps the defective one is simply exceeding some limit.
Apple Hardware Test is very cursory and essentially tests for the presence of operable hardware. It is far from an exhaustive test, and only a report of a failure can be relied upon for accuracy. For a more thorough test you would need to have Apple evaluate it using the time-consuming Apple Service Diagnostics. Even then, they may come up without a clue, and eventually someone will suggest a logic board replacement which can be expensive.
It is an unusual problem, and I don't know how much time Apple would invest in diagnosing it before they conclude you really ought to buy a new Mac instead. They might surprise you though in that a "depot repair", if yours is eligible, is a very cost effective option so consider it.
Given your ability you might also consider purchasing a replacement logic board from PowerbookMedic, or even sending it to them for a flat rate repair.

My new mac mini (3 month) didn't start up,all that appeared was a white screen and a flashing folder with a question mark inside it.

My new Mac mini (3 month) didn't start up, all that appeared was a white screen and a flashing folder with a question mark inside it.
I followed by recommendations from 'Everything Mac': "shut it down by pressing and holding the power button for about 5 seconds.
Then hold down the Option key and press the power button again to start up the Mac mini. Keep holding down the Option key until
the Mac mini starts up."
But I got a Wi-Fi button only to chose and connect the local network. I connected to my network and I can't use this connection
becouse no icons.
Could you please help me?

Your Mini (running 10.6.4) should have come with grey-colored install disks. Now is the time to put them into service. Turn on your computer so that there is power to accept disk #1 into the optical drive. Once the disk is in the drive, shut off the computer by holding the start button down until it powers off. Then turn it on this time holding down the "C" key to make the computer boot from the disk. The question mark that you saw indicates that the computer cannot find a bootable volume. This can happen due to corrupted system files or an improper shutdown etc. Once you are in the "Installer" you can choose Disk Utility from the Utilities Menu in the menu bar. Use it to repair the disk and to see if that can solve your trouble.

Flashing Folder with Question Mark, Disk Utility Grayed Out

I was working on my macbook pro when it appeared to freeze, so I manually shut it down by pressing the power button. When I pressed it again to restart the computer, the restart "chime" sounded, and a flashing folder with a question mark appeared shortly after. The folder flashes for a few minutes, and the macbook turns off again. After consulting the internet, I restarted while holding command+r, and the computer told me to reconnect to the internet, select a language, and so on. When I reached the menu giving me choices for how to recover my information, I discovered that there were apparently no time machine backups recognized and when I tried to use the "first aid" option in Disk Utility, all of the action buttons are grayed out when I select the drives (I'm running OS X Mavericks) at the left, including the "Verify" option at the top. Is there anything I can do? I really would rather not restore a new version of OS X to preserve my information.

Thanks for the response. When I clicked on the option to reinstall, the window asking me to select the disk where I would like to install Mac OS X presents no options. There's just a blank white box with no other messages or prompts.

I just powered on my mac book pro and have a blue screen with a flashing folder with a question mark in the middle, how do I get out of this?

I just booted my mac book pro and it is at a blue screen with a flashing folder with a question mark in the middle of it. How do I get out of it?

Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(126818)

I have the mac book air and when I turn it on its a light blue screen with a flashing folder with a question mark on it and I cant get past it. Anyone know about this?

I have the mac book air and when I turn it on its a light blue screen with a flashing folder with question mark on it. Any one know how to get past it?

The MBA is trying to tell you that it is not able to find a bootable system
Either the file is corrupt or access to the storrage has failed
I would start by seeing if it will boot with Command + R depressed

What do I do when he only thing on my screen is a flashing folder with a question mark.

I had a few browsers open on my computer. I accessed my calendar and it froze. The mouse would still move, but I could not click on anything. Then the screen went grey with a flashing folder with a question mark. I turned the power off and turned it back only but only see the grey screen with the flashing folder. I tried resetting the PRAM but it still will not work. Can this be fixed? Please help!!

You may have a disk error - could be an unrepairable physical problem with the drive, or a repairable file structure problem.
Hold down cmd-R (both keys together) as you start up the Mac, and keep them held down until you see the Apple menu. When it boots to the recovery partition, click Disk Utility, and run Repair Disk on the Macintosh HD. Let us know if you see errors there and whether or not DU can fix them.
Good luck!
Matt

Blank screen with flashing folder with question mark on startup of 13" macbook

Hello world, my daughter's 13" macbook upon startup opens to a blank screen with a flashing folder with a question mark in it... If anyone could help us resolve this issue we would greatly appreciate it... Thanks!..

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then select the First Aid Tab and run Repair Disk. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Flashing folder with question mark on screen

flashing folder with question mark on screen

This is the first time I have joined the support forum for MacBook - I tried the after Power Off - then while you turn it back on again your hold the "Command + R" - This has worked for some people - this was obtained on YouTube - see www.youtube.com/watch?v=flv2ebQMMtE. This however, did not work for me. I remember having a problem with my PC a few years ago - when I experienced something like this on it. I fixed it by taking out the battery. I was going to check the cable between the hard drive and the motherboard to make sure it was secure. I removed the Battery on my MacBook - blew it off, and put it back in again and surprisingly it booted up normally. Thanked the Lord for the quick fix. Back to Normal.

Flashing folder with question mark on startup mac mavericks

Hi buddies, I've an old macbook (those with pretty die hard silver case).
last night when i just turned it on, after days a flashing folder with a ? mark on it appeared... and nothing..!
I read this A flashing question mark or globe appears when you start your Mac
but i wanna know if my datas on my hard disk would be safe or not... and what should I do keep them safe.
If I loose my files and data, you can name me dead!!!

Your data are safe if you have them separately backed up. Otherwise, there is no assurance they are safe. Given the nature of the problem it's too late to backup your data, so you will need to try reinstalling OS X and take your chances all will work out well. Hopefully, it will.
If you have Snow Leopard installed:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you have Lion or later installed:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.

Flashing folder with question mark comes up at startup, HELP!

I turned on my computer this morning (it has been working fine until then) and a flashing folder with a "?" appears. White screen. I don't know what to do, I held the Alt key at startup and that just gets me to a gray screen with my mouse. I'm not too computer saavy so please let me know what I need to do! thanks!

Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Or for Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Gray screen, flashing folder with ? In it....

Similar Messages

Maybe you are looking for