Translated wire message missing some values

Hi,
I am enqueuing an EDIFACT xml to B2B out queue (IP_OUT_QUEUE) which is getting converted to wire message and delivered correctly. But the translated wire message is missing some values:
UNH segment of EDIFACT xml:
<Segment-UNH>
<Element-0062>1</Element-0062>
<Composite-S009>
<Element-0065>ORDERS</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>07B</Element-0054>
<Element-0051>UN</Element-0051>
</Composite-S009>
</Segment-UNH>
Starting part of wire message:
UNA:+.? 'UNB+UNOB:1+ + +100407:2354+1003'UNG+ORDERS+ + +100407:2354+1003+UN+D:07B'UNH+1+ORDERS'BGM+105:::?' ?'+GSIAP.WORLD?:oracle.apps.po.event.xm::?'
In wire message, 'UNH+1+ORDERS' - this portion is not having values of Element-0052, Element-0054 and Element-0051. Why are this values ('D','07B','UN') missing in the translated wire message?
How can I make them appear in wire message?
Appreciate your help.
Thanks in Advance,
Siddhesh

Hi Siddhesh,
Check your ecs file. Possibly you have not defined these params in ecs file.
Enable the validation then you will come to know exact issue.
Rgds,
Nitesh Jain

Similar Messages

Missing some values for Navigation attr

Hi All,
1.     We are using a Navigational attr for an MD Info object
2.     This Nav attr is used in Cube(Checked box - as Nav @ cube level)
3.     Problem is : I am able to see all Navigation attr values data , but randomly missing some values for this Nav attr.
u2022     What is the reason?
u2022     Please advise step wise..Any seetings I missed?
Thanks ,
LN

Cube neednot display all values of your navigational attributes.It displays only value for which it recieved the main infoobject.
eg :assume 0MATERIAL and nav attr say A.
Then only values for 0MATERIAL which is present in the cube the nav attribute will be displayed.
Hope this helps.

Missing some value of Message Notification from WorkCenter

Hi Expert,
I have scenario when user create message notification from workcenter, it will be send mail automatically to the user (mail account) in status new and I have successfully create it.
And the issue is =
When i preview the message from the transaction (from menu action), it will display the whole message.
But when user received the message via mail account, some value from the message is miss (not whole message will be appear)
Could anyone help me how to solve this issue?
Regards,
Rhesa Syahrial

I just used to have stalonetray running at the bottom of my screen. I made its height small enough to fit along with my conky 16px I think it was. Doesn't take up too much space.
Since I switched to i3, I find its better to just not use trays as I can simply assign a whole workspace for skype and so I don't need any tray.

Sales Order - Missing some values at Header

Hi all,
I have a sales order with item category TAQ. Two items go to one plant, and one item go to another plant. All pricing exist at line item level. However at header level, the net value only include net value of the one items in one plant. Net value of the sale order is missing the two items.
I don't understand how this happen. There are pricing calculations for all 3 items at the line level.
Would anyone have any suggestions ?
thanks
joyce

HI,
When you say pricing will be calculated at header level, do you mean at the finished goods level in sales order ?
thanks
Joyce
If you are working on BOM scenario, then for TAQ the pricing will be calculated at header level only for Higher level item. for other items, item category must be different.

Inbound IDOC missing some values

Hi ,
We got few fields in the IDOC which are populated at the sender side of the IDOC but when it comes to XI we dont see those fields populated in the payload at the sender. Any idea on what could be wrong. I have checked the mapping in XI and the sender has the 2 fields in the IDOC. Trying to figure out where it went wrong.

@ Srinivas - If there is problem with metadata, there will error message here is not the case.
actually if there is a field generated on the IDOC it has to come to XI in the source payload.
check this.
Idoc Payload incorrect
Edited by: Venkat Anusuri on May 18, 2009 4:46 PM

Error printing Check - "Missing Parameter Values. Error During Printing"

Dear friends,
Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
We have checked the Crystal Reports and all the parameters are given.
Can anyone help me regarding this?
Thanks and regards,
Bharath S

hi,
Quoted from Note 1555170
1555170 - Error 'Missing parameter values' printing with CR layout
Symptom
When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
Step by Step scenario:
1.Go to Administration / System Initialization / Print preferences and select the tab per document.
2.Select the document stock transfer and tick the box print document when adding document and click on update.
3.Go to stock management / stock transactions / stock transfer
set the Crystal report template as default.
Note:
- The issue is reproduced also for Goods Receipt and Good Issue.
- The issue is reporduced with any Crystal Report Template for the     above documents.
Cause
Program error
Solution
This issue is candidate for a change in a future release of SAP Business One.
Workarounds:
1.Use PLD for printing the stock transactions.
2.Convert the PLD layout to Crystal reports with Crystal converter.
3.Print the document after adding it.
Other terms
sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
Header Data
Released on     07.02.2011 13:27:30
Release status     Released for Customer
Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
Other Components
SBO-GEN-PRT Printing Issues
Priority     Correction with low priority
Category     Program error
Validity
Software Component
Version
SAP BUSINESS ONE
8.8
8.81
you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
regards,
Fidel

"Missing parameter values." Error when setting record selection formula

Setup - VS 2008, CR 2008 (v12.0), Win XP & C#.Net
I have a form which loops through all parameters (non-linked to sub reports, so only off the main report) and allows users to enter the values for each parameter. When hitting the preview button, I loop through all of the saved values, set the parameter field values and then add any additional filters into the recordselection formula as below. The problem i'm having is that the ReportDocument.HasRecords returns true if the ReportDocument.RecordSelectionFormula doesn't filter out every result.
For example, I have a list of customers and if I set the selection formula to filter out a specific customer, ReportDocument.HasRecors returns true, if I set the selection formula to filter something that doesn't exist i.e. customer "xk39df", the moment this line of code runs "ReportDocument.RecordSelectionFormula = rsFormula;" - ReportDocument.HasRecors returns the following exception as opposed to "False".
Message: Missing parameter values.
Source: CrystalDecisions.ReportAppServer.DataSetConversion
StackTrace:    at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.hasRecords()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_HasRecords()
ErrorID: MissingParameterFieldCurrentValue
The strange thing is, it works fine if the recordselectionformula selects a record which exists in the results - all parameters have a current value except for the linked parameters.
This one has got me stumped!
foreach (ParameterFieldDefinition parameterField in ReportDocument.DataDefinition.ParameterFields)
                var query = ReportObjects.Values.Cast<Filters>().Where(objects => objects.ParameterName == parameterField.Name.ToUpper().Trim());
                foreach (var item in query)
                    parameterField.CurrentValues.Clear();
                    parameterField.CurrentValues.Add(item.ParameterValue);
                    parameterField.ApplyMinMaxValues(item.MinLength, item.MaxLengh);
                    parameterField.ApplyCurrentValues(parameterField.CurrentValues);
            var records = ReportObjects.Values.Cast<Filters>().Where(recordSelection => recordSelection.RecordSelectionFormula.Trim().Length != 0);
            foreach (var item in records)
                rsFormula += item.RecordSelectionFormula;
            if (rsFormula.EndsWith(" AND "))
                rsFormula = rsFormula.RTrim(5);
            ReportDocument.RecordSelectionFormula = rsFormula;

Hi,
The report has it's own ADO Datasource set in crystal reports, so I just pass the log on information to the report object before doing anything else.
this.DataSourceConnections[0].SetConnection("ServerName", "Database", "sa", "Password");
I then do a refresh before applying the parameter values (I do this because the user can preview the report more than one time by using a preview button on the parameter form without re-loading the report object)
this.Refresh();
Then I set all parameter values followed by setting the recordselection formula.

Upgrading from FF 3.0.5 on Intel Duo Macbook (OS 10.5.8). Cannot drag downloaded new version into applications folder. Missing some "privileges."

Currently using FF 3.0.5. Trying to upgrade to current version.
Running Mac bok Pro OS 10.5.8 (Intel Duo).
Downloads fine. But whn dragging to Appl folder get message "Missing some privileges."

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Missing some error messages from the error stack

Hi all,
We use some PL/SQL code to load data in to the database.
One value was to large for a column.
I got the errors below, but there are some messages missing from the alert file and from the trace file.
Error messages:
ORA-06502: PL/SQL: numeric or value error
ORA-01401: inserted value too large for column
That's it, noting else. I can't see anything else in the alert log either.
No trace files either.
Can someone please explain to me why am i missing the rest of the error stack, like the column name where the issue occurs?
Thanks.

Peter,
No your code won't work the same in 10g as it would in 9i and earlier. The -1401 exception is not secretly catching -12899 now. So that means it could be an upgrade issue: you'd have to manually change the code when upgrading to 10.
Here is a little test on 10.2.0.1:
SQL> create table t
2 ( id number(2)
3 , name varchar2(2)
4 )
5 /
Tabel is aangemaakt.
SQL> declare
2    my_exception exception;
3    pragma exception_init(my_exception,-1401);
4 begin
5    insert into t values (99,'AAA');
6 exception
7 when my_exception then
8    dbms_output.put_line('my error message');
9 end;
10 /
declare
FOUT in regel 1:
.ORA-12899: waarde te groot voor kolom "RWIJK"."T"."NAME" (huidige waarde: 3, maximumwaarde: 2)
ORA-06512: in regel 5Regards,
Rob.

Missing parameter values message when exporting report

Post Author: Gr_Pr
CA Forum: .NET
Using .NET 2005, CR XI R2, and the Crystal SDK for .NET 2005 to generate reports. Basically CR is my application's reporting tool. So, we create a report in CR XI R2, then distribute that report to our users loading it into the .NET application using the Report Document class.
We have a small problem.
Our user's have the ability to use pre-defined 'prompts' that will pass parameters to the reports. Let's say that the prompt will pass in (5) pre-defined parameter values, but the customer wants to run their own 'custom' report using our prompt, but their 'custom' report contains (6) parameters.
If I let the Report Viewer load the report, the user will be prompted for the missing parameter value that was not supplied by the 'prompt'.
If I run the report without loading it into the Viewer and try to export the report directly to PDF I receive an error message from CR stating I have 'Missing Parameter Values' then the report errors out.
Has anyone come across this? Is there something I missed?
I am not real sure as to why you would be prompted by the Viewer and not by the Export Class. This worked fine when using the RDC component, I was prompted for the missing parameter value by both options.
Any help would be greatly appreciated.

Hi,
The report has it's own ADO Datasource set in crystal reports, so I just pass the log on information to the report object before doing anything else.
this.DataSourceConnections[0].SetConnection("ServerName", "Database", "sa", "Password");
I then do a refresh before applying the parameter values (I do this because the user can preview the report more than one time by using a preview button on the parameter form without re-loading the report object)
this.Refresh();
Then I set all parameter values followed by setting the recordselection formula.

I am trying to play some videos from the internet and I get the message missing plug in. I click on "missing plug in" and download adobe flash player. When i try to log in again to play videos, I still get the message missing plug in. Any suggestions?

I am trying to play some videos from the internet and I get the message "missing plug in". I click on the message and downlaod adobe flash player as prompted. When I log in again to play the videos, I still get the missing plug in message. Any suggestions??

that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).

Some values missing in FAX whereas same drivr program and smartfrm in print

Hi Experts,
I have a driver form and smartform in Print and same in fax configured in nace. But there are some values missing in FAX output whereas in print and email it is correct.
Can anyone help with the reason.
Thanks

closed..

Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing Some of the application components are missing from the Application directory. Please reinstall the application. I have the pay monthly package and don't

Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.

Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Import Mailbox Missing Some Messages

Hi,
I am trying to move my local mailboxes in Mail from a Macbook Pro with OSX 10.5 to a Macbook Pro with OSX 10.7. I backed up each mailbox on the old computer using Mailbox > Archive Mailbox within Mail. I then copied those files from the old computer to the new computer. On the new computer, I imported each mailbox using File > Import Mailboxes within Mail.
Unfortunately, several of the mailboxes on the new computer don't have all of the original messages. For example, one mailbox that has about 2000 messages on the old computer now has only about 1500 messages on the new computer.
Can anyone tell me why this happening and how to fix it?
Thanks for any help!

Thanks! This helped, but not fully.
On the old computer, I rebuilt each of the mailboxes that hadn't imported correctly. I then archived those mailboxes, copied to the new computer, and imported in Mail. More of the missing messages are now there, but not all.
For example, one mailbox had 5481 messages on the old computer. When I first moved it to the new computer, it only had 1693 messages. Once I went back and rebuilt, then archived, copied, and imported again, it now has 4129 messages on the new computer. But there are still about 1300 messages missing.
I also tried rebuilding the mailboxes once they had been imported on the new computer, but that didn't change anything.
Is there another use of Rebuild that I'm missing?

ReportDocument.Export() raises "Missing Parameter Values" exception

Hi
Recently I encountered a question about SAP Crystal Report that I have a rpt file with several sub reports and I am required to make the data source to be XML with http/https URLs. I created different .NET pages which returns XML stream as data source for both main report and sub reports in my rpt file, and also created a sub report links which pass dynamic parameters from main report to the sub reports, everything worked fine when I entered the necessary parameters only for the main report in the design tool, both the main report and sub reports displayed perfectly.
But it did not work in my .NET application which export the reports to PDFs, I referenced “CrystalDecisions.CrystalReports.Engine” and some other necessary DLLs into my project, and then I created an instance of ReportDocument, loaded the rpt file, set parameters which used in the main report, set connection info, and at last when I export the report it throw out an exception with “Missing Parameter Values” error message, even though I removed the sub report links which pass parameters from main report, the exception still occurred, but when I removed all the sub reports, and only export the main report it worked!!
Here is a result of my attempts:
Main Report
Sub Report
Result
1
With XML data source
No report
Works fine with dynamic parameters set to the http/https url which returns an xml results
2
With XML data source
Pass a static value and print it on the report
Works fine.
3
With XML data source
Create a SQL command WITHOUT any parameters passed from main report
Works fine
4
With XML data source
Create a SQL command WITH a dynamic parameter passed from main report
Works fine
5
With XML data source
Create a xml data source WITHOUT any parameters passed from main report
Failed with "Missing Parameter Values"
6
With XML data source
Create a xml data source WITH a dynamic parameter passed from main report
Failed with "Missing Parameter Values"
I am confused about this issue for a few days, is there any ideas or helps? many thanks!

OK:
We upgraded to CR 13.0.2000.0 and Visual Studio 2012 and .Net Framework 4.5.
Problem still happens.
When we display the report in the designer, the url has parameters. Here are the IIS log entries:
2014-05-01 18:24:56 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test.aspx @IFPPSID=1899582751211388&@styleColorScheme=10511658/13343077/10511658/13343077/16777215/15720656/16777215/15720656/24831/13426687|10511658/16777215/16777215/16777215/0/0/0/0/0/0 80 - 10.16.26.44 Java/1.6.0_37 200 0 0 959
2014-05-01 18:24:56 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test2.aspx @BrokerID=23433176 80 - 10.16.26.44 Java/1.6.0_37 200 0 0 742
When we use the crystaldecisions.crystalreports.engine, no parameters are passed. Here are the IIS log entries:
2014-05-01 18:22:28 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test2.aspx - 80 - 10.16.26.44 Java/1.7.0_45 200 0 0 58
2014-05-01 18:22:28 192.168.251.10 GET /quotit/apps/leadspro/CrystalServiceGateway_test.aspx - 80 - 10.16.26.44 Java/1.7.0_45 200 0 0 115
I cannot attach the rpt file here. If you need it, please let me know how to get it to you. I am attaching a screenshot of the datasource location. I am pasting in the striped down .NET code. Any help or pointers would be greatly appreciated.
Thanks,
Tom
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Configuration;
using System.IO;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using System.Collections;
namespace CrystalTest
    class Program
        static void Main(string[] args)
            string source = Path.Combine(@"C:\Users\thomas\Desktop\reports\eProIFP\iProReports", "summaryReportByPremium_ACA_UltraColor.rpt");
            string destination = Path.Combine(@"C:\Users\thomas\Desktop\testReports", "output.pdf");
            if (File.Exists(destination))
                File.Delete(destination);
            ReportDocument rptDoc = new ReportDocument();
            if (File.Exists(source))
                rptDoc.Load(source);
                rptDoc.SetParameterValue("@IFPPSID", "1899582751211388");
                rptDoc.SetParameterValue("@styleColorScheme", "10511658/13343077/10511658/13343077/16777215/15720656/16777215/15720656/24831/13426687|10511658/16777215/16777215/16777215/0/0/0/0/0/0");
                rptDoc.SetParameterValue("@testID", "1");
                CrystalDecisions.Shared.TableLogOnInfo logOnInfo = new CrystalDecisions.Shared.TableLogOnInfo();
                foreach (CrystalDecisions.CrystalReports.Engine.Table objTable in rptDoc.Database.Tables)
                    logOnInfo.ConnectionInfo.IntegratedSecurity = true;
                    objTable.ApplyLogOnInfo(logOnInfo);
                ExportOptions CrExportOptions = new ExportOptions();
                DiskFileDestinationOptions crDiskFileDestinationOptions = new DiskFileDestinationOptions();
                crDiskFileDestinationOptions.DiskFileName = destination;
                CrExportOptions = rptDoc.ExportOptions;
                CrExportOptions.DestinationOptions = crDiskFileDestinationOptions;
                CrExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
                CrExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat;
                rptDoc.Export();

Translated wire message missing some values

Similar Messages

Maybe you are looking for