Transport a standard text
hi all,
1.how to transport a standard text?
2. how can we make available a form which is on client 100 to client 200?
thanks & regards
sanjeev
1. RSTXTRAN is the program to transport the texts
2. You will have to copy the Scripts from the one client to other client. I think you can do it in the SAP Scripts transaction.
Regards,
Ravi
Note - Please mark all the helpful answers
Similar Messages
-
HOW TO TRANSPORT THE STANDARD TEXT FROM ONE SERVER TO ANOTHER?
After creating the standard text in SO10 transaction
it will not ask for any transport request no while saving ,
i want to transport the standard text from development to test server.
how can we do that?Hi Riaz,
To transport a Standard Text through a transport request , you need to attach the standard text through the transaction RSTXTRAN.
After executing the report RSTXTRAN , you can enter first the task name then the Object as TEXT , then the name of the standard text , ID as ST, then the language as EN or something else .then execute.
you cannot attach a standard text to an unassigned task.Firat you have to either activate a smartform or a script with that task then only you have to attach a standard text.
I think your query is almost answered .
Reward if you please.
Thanks & regards,
Ram -
How can I initiate a transport of Standard Text over to another client
HI,
I need to re-create all the customized standard text in our new ECC6.0 box. Afte creation, I want to transport it to the QA for testing and eventually to the new ECC 6.0 production.
While creating the text, it does not trigger any transport request.
How can I initiate the Transport request?
I had explored and found that it is also possible to upload to the destination. I would prefer the Transport method.
Can someone advice?
Thanks
ThanksThe program name is RSTXTRAN. run from SE38
detailed documentation is here.
Symptom
This is a brief guide to RSTXTRAN
More Terms
RSTXTRAN, Transport of SAPscript Texts, Standard Texts
Cause and Prerequisites
Solution
Basic Background
You want to transport SAPscript Texts from a source system to the target
system. You can do it in different ways. If you want to copy texts within a
system from one client to the other you can execute the report RSTXTCPY. In
other cases, i.e. transporting the texts between the different systems, you
can use the report RSTXTRAN. This report (RSTXTRAN) itself does not perform
any transporting but is used to prepare a Transport Task (TT). Having
prepared the TT with RSTXTRAN you have then to release it and the
corresponding Transport Request (TR) in a normal way (e.g. with an
assistance of Customizing Organizer - se10).
Please note the Type of Transport Requests (WBO or Customizing) depends on
the system settings.
Working with RSTXTRAN
1. Execute the report RSTXTRAN (e.g. within the transaction se38)
2. On the selection screen appeared you may specify:
2.1. Name of the Transport Task (TT). Make sure you specify the
Transport TASK number, NOT the Transport REQUEST ! You may leave this
field empty if you did not create to this moment the appropriate TT.
Later you will be able to create it within the report.
2.2. Text Key. This composite key consists of four fields: Object,
Name, Id and Language. You may specify these fields also generic
(caution: until Rel.4.6A you have to specify \'*\' if you need a generic
selection; leaving a field empty will cause a search for the blank
field that usually returns no results!). This key serves as
preliminary search restriction only and does NOT mean all the texts
which satisfied the specified key must be included into TT.
3. Having specified some fields on the selection screen you can go
further with \'Execute\'(F8).
4. On the screen appeared you will see the list of texts that satisfy the
specified restrictions. By default all the texts are selected for
including in the TT. You can deselect all the texts or select all of
them again using the function \'deselect all\' or \'select all\'
respectfully. Certainly you may select the texts individually as well.
In order to proceed you have to use function code \'continue\' clicking
on the icon \'OK\' or pressing the button \'ENTER\'.
5. At this stage you get another list of texts that already exactly
defines the list of texts to be included in a Transport Task. You
cannot change this list any more. If you want to change something (add
new texts or exclude any of them) you have to go one step back (F3)
and update your selection. You can now include this list to the TT by
pressing the button in the toolbar \'Transfer texts to correction
request\' and confirming the action.
6. If you have left the field \'Name of Correction\' empty on the first
selection screen you will then be asked to provide the Transport
Request number. You can select it from already existed ones or create
a new one. However if you specify anything(!) in the field \'Name of
correction\' on the first selection screen and the specified TT does
NOT exist (generic input is not allowed there) you will get an error
message \'Request/Task xxx does not exist\' (TR 806). In that case
please go to the first screen and fill out this field correctly, or
leave it completely empty. Then repeat the selection again.
7. When you have performed all the steps properly you get a message the
selected texts were included into TT. Now you can leave the report and
release the appropriate Transport Task/Request in Customizing
Organizer (se10).
Edited by: Henry Hsu on Nov 27, 2010 3:37 AM -
Deletion transport of standard texts
Hello,
I want to delete some standard texts in DEV system and transport this deletion to the QAS system. So that after some kind of transport the texts are deleted in QAS system as well. How can I do this?
Thanks in advance.
RobinHi,
I think this program (RSTXTRAN) only adds existing texts to a transport. How can I tell, that a non existing text shall be deleted on target system?
Robin
Message was edited by:
Robin Senge -
Error while transporting standard text using RSTXTRAN
Hai Gurus
I am trying to transport the standard text that was created in Development to Quality with the script I am working. I tried to attach the SO to the task Request using RSTXTRAN and SO are selected.Finally when I am trying attach to the correction it throws up error like this "You cannot transport client-specific objects"...what should we do for this...
Thanks
GaneshHi Gurus
The Message is "You cannot transport client-specific objects".
Diagnosis
The object 'R3TR' 'TEXT' 'TEXT,Z_2200_REMIT2,ST,E' is client-specific. The current client is set so that you cannot transport client-specific objects.
System Response
You cannot release the request.
Procedure
Delete the object from the request, or ask the system administrator to change the setting of this client.
Should this occur of Settings by the Basis Guy in this client
Thanks
Ganesh -
Getting error while transporting standard text
Hi,
I am trying to transport the standard text(created in SO10), by using RSTXTRAN program but i am getting this error message " Changes to objects are not allowed in correction/Repair" after click on "Trsfr texts to corr" button.
I am doing in the following way.
Program : RSTXTRAN
Given
Text key - Object - TEXT
TEXT KEY Name - ZTEXT
ID - ST
Language EN
Execute
enter -> click on button called transf text to corr -> it is throwing message " Transfer text to a correction" i am saying "yes" then its throwing the following error " Changes to objects are not allowed in correction/Repair"
Regards,
Sarath.JHi,
In order to assign a standard text to your request. You should be the owner of the request. Though you have a task on your name under that request, it doesnt allow you to assign. You will be getting the error which you got now.
Regards -
Transport STANDARD TEXT KEY from CA10
Hi ,
Is it possible to transport the STANDARD TEXT KEY created in CA10? Please give your suggestion on how it can be done or is it advisable to create entries in each client manually.
Thank you.You can only transport the standard text key along with its short text, long text transportation is difficult as they are not stored in transparent tables.
Follow the steps:
1. Go to transaction SE10. Click on Create.
2. Following pop-up appears. Select Workbench request.
3. Now double-click on the request
4. give the following details:
Prog ID: R3TR
Object type: TABU
Object Name: T435T
5. Now click on the key button available under the name u201CFunctionu201D
6. Following screen appears. Double-click on the first empty line.
7. Here we can provide the entries that we would need to transport.
Client: Client name
Language:*
Std text key: *
8. Now you can check for the entries that would be transported as per the given condition, by clicking on the table button
Select the third radio button u201CTable contents specified by current keyu201D.
9. Click on Save. A warning message would appear.
Ignore the warning message and click on Save. Now transport this request to transport the data to any other system. -
Hi All,
I did some changes in Standard Text in the development system. Can anybody tell me how to transport the the standard text?
Any pointer / document link will be highly appreciated.
Thanks,
RKM.Hi Ravi
You can transport the standard text changes with a new transport request using SE01.
In the new transport request provide the details as follows.
PgmID as R3TR
Obj as TEXT
Object nam as TEXT,Standard text name,Text id,Language. Example: TEXT,ZSTTEXT,ST,E
After providing these details Save the CTS and release to transport.
Regards
Hareesh -
Transport Standard Text Changes
i have done some changes for the standard text in PB60.
but those changes are not transported in to production
i used
RSTXTRAN
program to transport changes
after selecting relevant Object(TEXT,Z_JKH_LOA_GROUP,ST,E) -> selected 'Transfer texts to correction
request' & then assigned relevant Transport Request to next step
Some blogs says this is the way to do this.......... but it is not working somehow
Can anybody help me to solve this issue
thanx!!!!!Hi Waruna,
You can transport the standard text changes with a new transport request using SE01.
In the new transport request provide the details as follows.
PgmID as R3TR
Obj as TEXT
Object nam as TEXT,Standard text name,Text id,Language. Example: TEXT,ZSTTEXT,ST,E
After providing these details Save the CTS and release to transport.
This will deffinately solves your problem.
Feel free to rise if you have any queries on this.
Regards,
SB.
Edited by: sunil bodda on Feb 24, 2009 2:29 PM -
Hi
Can any body tell me the table name which stores the standard text.
And what is the procedure to transport a standard text .
thankshi thanks for helping me out.
but i need some more help. tell me about the parameters which i have to pass in the selection screen of RSTXTRAN prg.
How can i attach the CR .what is fuctionality of Name of correction field.
Do i run the prg RSTXTRAN in the target server or target client.
plz tell its urgent -
Standard Text Correspondence emailed
Hi,
I hope this is the correct forum for this question.
I've created some standard texts (via SO10) for correspondence in the recruitment module (PA-RC), when I send this to a candidate it produces an email with a PDF document which has the correspondence but the body of the email is empty (other than the attachment). Does anyone know how, or have any suggestions on how to either input the content of the PDF into the body of the email, or how to generate some text in the body?
I've had a look through the forums and can only see this question asked by others, but with no resoultion.
Thanks
TomHi,
Standard text is "<b>client depedent</b>". ( so is SAPScript )
You can transport it with two different ways.
[1]. Program <b>RSTXTCPY</b>
[2]. Create a manual transport of standard text. For this follow these steps.
- Go to transaction SE10. Create a transport request ( workbench ) and task under it.
- Select task and hit button "Disply object list (Shift + F11)".
- On the next screen, switch to change mode.
- Hit button "New entries".
- Now create entry with these values
PgmID = R3TR
Obj = TEXT
Object Name = TEXT,MY_TEXT_NAME,ST,E
here, MY_TEXT_NAME is your standard text created in SO10 and 'E' is language. ( i assume the text is in english ).
Let me know if you have any question.
Regards,
RS -
Can anybody tell me how to transport a standard text to different systems. And if it is possible tell me how to add standard text in a CTS.
Thanks,
Daniel Son.To Transport Standard Text to Different Systems
Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a transport request.
The entries are as follows:
R3TR FORM NAME (NAME = Name of the layout set)
R3TR STYL NAME (NAME = Name of the style)
R3TR TEXT OBJECT,NAME,ID,L
(OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a correction. The transport request must be entered and released via the transport system.
to add standard text to CTS
this link wud be of help
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Do reward if helpful -
Hi Experts,
I have created custom text using So10, while creating it doesn't ask for CTS...how to save the custom text in CTS
Thanks in advance
ReddyYou can use standard texts in workitem texts Rick,
Hi Reddy,
You can use program RSTXTRAN to transport these standard texts.
Kind regards, Rob Dielemans -
How to transport standard text in SO10 to different system.
Hi,
I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
Please let me know regarding this. Thanks in advanceSteps..
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA.. -
How to Transport standard text in scpits from 1 client to other
HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
VeerendraHi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m.
Maybe you are looking for
-
Iam getting error message when i launch Opera web browser
Hi All, I have installed Opera web Browser on solaris 9 without any error message. When i try to start Opera web browser it says following message ld.so.1: ./bin/opera: fatal: libqt-mt.so.3: open failed: No such file or directory Killed How to solve
-
Hi, I don't know how to find a specific security patch to apply to my Oracle database version 11.2.0.2.0 (on windows server 2003 32 bits) to fix the following vulnerability: Risk: High Application: oracle_tnslsnr Port: 1521 Protocol: tcp Synopsis: It
-
HELP needed with LG monitor working
I was given a 22" LG external monitor to use with my MacBook Pro. Once I got a minidisplay port to VGA adapter, it worked, but only as a mirror. I could not get it to act as a separate monitor to move programs and the cursor between. For dual display
-
Purchase Order item text not present in accounting documents after MIGO
Hello all, in ECC 5.0 I create a PO using ME21N. Afterwards the GR is done with MIGO. For the moment the PO item text is not transferred to the FI documents. The field BESEG-SGTXT is empty. Is there a possibility to copy the text during GR from the P
-
How do I print a list of the songs I have downloaded?
How do I print a list of the songs I have downloaded on I Tunes? Also I would like to know how to print a lable for the jewel case the cd's go in.