Transport All Roles to Another System

Hi Experts,
I have one requirement. I want to create same roles in Development System that I have made in QA System.
So is there any technic, I dont have to make it again in Development system and copy from QA system?

Hi,
Transport is not possible from QAS to DEV system.
So in this case you can use upload download roles.
Go to PFCG. Create one composite role and add all the roles that you want to transfer.
Then select that composite role in PFCG screen. Go to Role --> Download. It will ask to save the role file. Save it on your machine.
Now login into the DEV system, go to pfcg. Go to Role --> Upload and select the file which you have stored earlier.
It will create all the roles in DEV same as QAS. You have to create profile of all that role.
You can generate mass profile using SUPC. Go to SUPC and select all the roles which you have transfered and generate their profile.

Similar Messages

Transporting XML forms to another system.

Hi , I need to transport my XML project only one time to another sytem. What do i do ?? I do not want to setup and use ICE stuffs.... any ideas out there. is there some post processing stuff?
thanks.

Hi,
You can do one thing.
You can create a KM Navigation iview and set the property 'path to document' as /ice
and assign this iview to page to workse to role. Assign this role to users/groups.
This way you can export the KM content.
For import/package upload.
Check that Cotent management ->package upload iview in pcd content and duplicate that iview and assign that also to the same role.
This way you can do the KM transport.
Hope that helps.
Raghu

Export or transport all the RFC destination from one system to another syst

Hi
Is there any method to Export or transport all the RFC destination from one system to another system

Hi,
the information is stored in table rfcdes.But there are also some other RFC*-tables which have some relations. Nevertheless the RFC-connectons will possibly not work anymore in the new system(depending on the release your systems are), as the passwords are stored in the Sec store with system-dependent keys.
b.rgds, Bernhard

How to transport a package(dev class) to another system?

dear gurus,
is it possible to transport a package (development class) from one system to anther system mannully? there is no transport path between the two systems.
best regards.
Jun

Hello Jun
The "correct" way would be to create a transport request of type Relocation of Complete Package (SE10):
DE ORDER_MVE
Short Text
     Select relocation of a complete package
Definition
     Relocations of complete packages are transports with which you
     simultaneously
     o   move the original location of all objects in a package to the target
         system and
     o   simultaneously assign the package to another transport layer.
Use
     Changing the transport layer means that you can edit and transport the
     objects consistently in their new original location without delay.
However, I assume that this is not possible in your system landscape. In this case you can download the transport files using transaction CG3Y (if available => download as BIN not ASC) yourself. A transport request E01K900100 consists of two files (data and log file), e.g.:
/usr/sap/trans/data/R900100.E01
/usr/sap/trans/cofiles/K900100.E01
Please note that the transport directory is likely to be different on your SAP system (check for directory DIR_TRANS in AL11 or ask your basis colleagues).
Now on your target system you either upload the files into the corresponding transport directories using CG3Z (if available) or ask your basis people to put the files into the directories. Either your basis is importing the request or you can use transaction STMS (Import queue <target system>, menu Extras -> Other Requests -> Add).
Add the request to the import queue and import it.
Finally you need to change the original system of the transported object and the transport layer of the package:
1) SE03 -> Change Object Directory Entries of Objects in Request
2) SE80 -> Package in Change Modus: maintain transport layer
Regards
Uwe

Transporting SBWP distribution list to another system

Hi all,
Have anyone knows how to transport a SBWP distribution list to another system? I mean transport it from development system to QA system.
Thanks,
Teddy

I think the distribution list is not transportable. I will use another method to store the data so it will be transportable.

How i can copy my transport request from one system to another system

hi,
i want to copy all my code means( programs,tcode,class,FM...every thing.) which is under a transport request, now i want to copy all this code same as it is in another system
eg.
i have all my objects in for example D10 now i want all my code in some another system for e.g in D30.
how it is possible....

Hi Vipin,
Check tcode SE03 for transport related issues.
as suggested by all the TR needs to be released from the current system to make it ready to be transported to next system.
Once you release the request ask your basis administrator to transport the request to D30.
<b>Before releasing the request check with the basis administrator if the target system has been set to D30.</b>
Lokesh
Message was edited by:
Lokesh Aggarwal

How can download the roles from one system and upload them into another ??

Do anyone have the solution ..... ......it very important.

Hi,
Visit [Role Maintenance Functions|http://help.sap.com/saphelp_nw04/helpdata/en/e4/15e48efd6c11d296430000e82de14a/content.htm] in section Download/Upload.
To avoid inconsistencies, all roles from which a role is derived are also downloaded. When you download composite roles, all the roles which they contain are also downloaded.
When you upload a role, all role data, including authorization data is uploaded from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case. You must therefore regenerate the authorization profiles after the upload.
Mass Download:
Save several roles on the PC.
You can choose on the selection screen whether you:
Also want to transport the single roles contained in the selected composite roles (Customizing switch ADD_COMPOSITE_ROLES in table SSM_CUST)
Also want to transport the generated profiles for all single roles (PROFILE_TRANSPORT in table PRGN_CUST)
You can define the default setting for both options using the value in the Customizing switch. If you explicitly set a switch to NO, the option in question on the selection screen is not active. Otherwise, it is active.
Regards,
Srilatha.

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Copy Web Dynpro to another system - no transport

Hello
is it possible to copy a web dynpro to another system without using a transport? I know that i can simply copy and past the code of the methods but what about the layout, the context nodes, views, windows, .....
Thanks in advance
Fabian

and you need the Webdynpro Plugin from here:
[saplink-plugins|http://code.google.com/p/saplink/wiki/pluginList]

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

Transport all Ques Tab strip in Development to production transport system

By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback transportation.
Its very Urgent. Can any one help me?
Thanks in Advance

hi
Yes,you can reimport the same request back to your development,ask your basis people,they can do it..
Hope it helps
Thanks
Teja

Transport org. unit & position to another system

Hi,
I modified some org. units and positions in development and system did not ask for a transport request. How can I move my objects into test system ??

Jorge hi;
With tcode RE_RHMOVE30 you can create a request and transport them.
All you have to do is to choose the plan version, object types, objects. If you want all relations to be transported you can write A* in field evaluation path but if you want you can transport specific relations.
Select transport objects box.
In field task you can press f4 and then you can create a new request for the transport. After this press F8.
There will be a new screen. In this screen select the objects to be transported and then press F8.
After that you will release the request and transport it to the other system via using se09 and stms.
Regards;
Okan
Edited by: Okan Caliskan on Oct 4, 2011 1:58 PM

How to Transport a planning book to another system

Hello,
Can someone please let me know how to transport a planning book to another system?
Thanks for your time.
Sarath.

Dear Sarath,
Transporting Macro Books:
You can add macro books to a transport request so that they are transported to the target system(s) when the request is released. When you transport a macro book, the system exports relevant notes directly to the target system. For this, you must specify the relevant RFC destination.
To be able to use macro books in another system, you need to have already exported other objects such as the relevant planning object structures and planning areas to the target system. You do this in Customizing for Demand Planning or Supply Network Planning under Basic Settings -> Maintain Manual Transport Link for DP/SNP. You can also use this activity to transport macro books. If the planning area does not exist in the target system, you can transport the macro book, but you cannot open the macro book or use the macros.
To transport a macro book, select the book and choose Tools -> Transport Macro Books. On the dialog box that appears, enter an existing transport request or create new one. The transport request determines the system to which the macro book is transported. Choose Enter.
Regards,
Naveen.

How to transport R/3 datasources to another system (Urgent)

hai friends
I want to transport R/3 datasources i.e 2lis_03_bx, 2lis_03_bf, 2lis_03_um
these are transport to another system i.e QAS 300
please tell me the procedure
Urgent
Thanks
Ravindra

Hi Ravindra,
If the datsources are active then the steps are as follows:
1. Goto se03 -> Change Object Directory Entries -> Enter R3TR DSAA and the datasource name -> assignn a apckage and create the transport request.
2. Repeat the process for the next datasource and so on.
3. Now goto se09 and relase transport request.
4. Use STMS to transport the request.
Bye
Dinesh
(Assign points if useful)

How to transport CU02 objects from one system to another?

Hi,
How to transport CU02 objects from one system (Development) to another (Quality)?

You need to set up the object dependency IDOC in the partner profile.Message type is KNOMAS. The transaction to send is CLD2.

Transport All Roles to Another System

Similar Messages

Maybe you are looking for