Transport Error while moving BI objects to quality

Hi All,
I have the followinng landscape.
Source system :- Dev ECC 100(config) and Dev ECC 200 (data is present here).
Since for my BI implementation, I need data. I have created requests i.e for activating datasources in Dev ECC100 and then copied them into Dev ECC200.
Dev BI is connected to Dev ECC200, replicate the datasources and do my development.
Now I have created request in Dev BI for my BI objects.
*The question is when I have to transport it to Quality. What source system assignment I maintain in Quality Box ? *
So far, Quality ECC-100 and Quality BI-100 are connected.
Also I am maintaining Dev ECC 100 -> Qua ECC 100
                                 Dev BI 100 -> Qua BI 100.
I have alreday transported request from Dev ECC100 to Qua ECC100.
While transporting BI requests for datasources, I get the error : source system unknown Dev ECC 200.
Please respond.
-Amit

Hi,
I have resolved ths issue.
Actually in Quality BI, logical source system assignmement, I should have used
Source                                                       -->               Target
DEV ECC200 (instead of Dev ECC 100)     -- >                 QUA ECC 100.
Thanks,
-Amit
Edited by: Amit Dhasmana on May 5, 2009 2:05 PM

Similar Messages

  • Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

    Hello Experts
    Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
    Transport is included with  list of Data source Replica, Transfer rules, Transfer structure and Info Package.
    My data Source : ZVPRCRDT for an UPFILE
    Below is my error screen :
    Tried to resolve the error by moving the Data source Replica as an individual Transport.
    Still see the same error and my data source is active in the current system.
    Looking for a resolution to find out the root cause.
    Any help is appreciated...

    Thanks for your response Ram.
    My Source System UPFILE is in active mode.
    Unsure why system is throwing error as source system assignement was inconsistency.
    All fields are mapped perfect with one-one relation.
    Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
    Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
    If so can you let me know the approach.
    Thanks

  • Error : While Importing the Objects in Quality

    Dear all,
           I'm facing some error while transporting the Objects to quality server. The error's like
    Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
    Source system RD1100LS does not exist
    Source system RD1100LS does not exist
    Source system RD1100LS does not exist
    Source system RD1110LS does not exist
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
        Anyone suggest me how to solve this error..,
    Thanx in Advance..
    Regards,
    Saran

    Hi saran,
    Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
    First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
    Check all these things and if still the problem persists... Refer to the below threads which may help u...
    Transport Problem - Reference to Transfer Structure not available
    No Source system exist
    Assign points if this helps u...
    Regards,
    KK.

  • Error while creating info object

    error while creating info object a character
    Info object may be a maximum of  000060 digits...... what would be the error?
    Thanks ALL

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Error while creating Temse Object (W2 form in PU19)

    Team,
    When i try to create the w2 in PU19, i am getting the error statingthat ERROR WHILE CREATING TEMSE OBJECT HRLUS01A100900109026.Please advise me in this.(We are maintaining the HRSP-42).It is veryurgent,Expecting your valuable Guidance.Points sure for the answers.
    Regards
    Priya.K

    Hi
    let me know weather r u using any reference object which contain the routinee.
    regards,
    chandra.

  • Error while creating PDF object

    We are using Adobe Interactive Forms with Guided Procedures.  Netweaver 7.0 SP14 (Dual stack Java & Abap).  All was working well it appears until we configured SSL for ADS - don't know for sure if this caused the problem but it is the only change we can identify around the time that our problems began.
    When we attempt to Create an Impersonalized Form we receive the following error -
    Cannot retrieve template structure: Execution ended in an unrecognized state
    When we attempt to test a callable object associated with an interactive form we receive -
    Error while creating PDF object: PDF object could not be created; object returned from ADS is null.
    In both cases the entries in the default trace log are the same -
    Service XMLFormService: Native process (PID=0) /usr/sap/UFD/DVEBMGS02/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe terminated abnormally with error code 134
    PDF object could not be created; object returned from ADS is null
    com.sap.caf.eu.gp.base.exception.EngineException: PDF object could not be created; object returned from ADS is null
    at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.createInstanceDocument(AdobePDFAdapter.java:542)
    at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:507)
    Like I mentioned earlier this functionality was working successfully in our environment at one time.
    Any guidance in this matter would be greatly appreciated.
    Thanks,
    Joe

    Joe,
    If you originally configured ADS without SSL, I would recommend going back through the ADS Configuration Guide for your NetWeaver stack and make sure all the necessary changes for SSL were made.  I've seen another case where a step was missed in SSL configuration for ADS which caused a form to error.
    If everything looks good based on your SSL configuration, I would recommend creating an OSS Note.
    -Matt

  • Error while activating ODS Object (urgent)

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log  --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.     
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Hi venkat,
    There are only 3 info objects which  i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
    Is this issue is related to any authorization concerned?
    Urs,
    Raki.

  • Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Frank,
    There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
    Strange i m unable to find out the solution.
    Urs,
    Raki.

  • Error : while Importing SAP Objects in ESR.

    I am getting error, while importing SAP object in a scenario in ESR.
    What can be the issue ? as we have configured all the beckend settings & sldcheck is also OK.
    Also, we are using proxy scenarios are working fine on system.
    The details are as below :
        at com.sap.aii.ib.server.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulTransactionAssociation.invoke(Interceptors_StatefulTransactionAssociation.java:43)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulSessionInstanceGetter.invoke(Interceptors_StatefulSessionInstanceGetter.java:37)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
        at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
        at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
        at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
        at $Proxy1366.openSAPSource(Unknown Source)

    Hello,
    Have you used the notes to import ESR content?
    Refer to one of them according to your system version:
    PI 7.1X:
    #1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
    XI 7.0:
    #836200 - SAP NetWeaver 7.0: Importing Process Integration Content
    XI 3.0:
    #705541 - XI 3.0 (SP1 and higher): Importing XI Content
    Regards,
    Caio Cagnani

  • Getting status as ERROR while instantiating Business Object in work flow?

    Hi,
    Getting status as ERROR while instantiating Business Object in work flow.
    How to rectify it.
    Tahnks in Advance.
    Moderator message: please have a look at the dedicated Workflow forum on SCN.
    Edited by: Thomas Zloch on Jan 19, 2012

    Hi,
    Go to SWDD and create a new workflow. This workflow will have two steps. This is just for test purpose so we are not going to define any triggering event etc.  First step will instantiate (creating a runtime object) a business object and second step will use that runtime object to execute one of its method. We know that to instantiate any BO we need the object key to be passed. Key uniquely identifies a runtime instance of Business Object (henceforth we will refer it as BO or business object interchangeably). 
    use Business Object SYSTEM and method GENERICINSTANTIATE to instantiate any Business Object in workflow

  • Error while getting data objects for instance

    Hello Expert,
    I am getting some weird error - whenever there is a new process is triggered and I check context Data, I get following error -
    "Error while getting data objects for instance processinstanceid"
    Thanks is advance
    Priya

    Hi Priya,
    this is a known issue in the xml processing of the Java Virtual Machine. Please refer to the SAP Note for this issue: 1949395
    This should solve your issue.
    Best regards,
    Stefan

  • What are the objects need to collect while moving transfer rules to quality

    Hi All,
    In production data loads we have faced alpha conversion errror for the customised object ,so chkd transfer rules in that the conversion box is not chkd for that particular infoobject.So i have chkd that box in dev and activated the transfer rules.So now to transport to quality what are all the objects i need to select ?.
    If i drag drop the transfer rules in transport connection it shows like none of them are selected even infoobjects,infosource,source system and the selection box is inactive for transfer rules.
    So please provide me inputs how to goahead....Thanks

    Hi,
    While activating the transfer rules(after changes)-it proposes you the request number .. that u can transport to target systems.
    Else, using transport conn--> select only necessary objects in grouping --> find ur transfer rules and transport it.
    you can expand all the objects and check only required ones (uncheck others and source sys, coz ss cant be transported)
    Thanks,

  • Error while importing Configuration Object

    Hello guys,
    I get this error while I try to import the Configuration Scenario objects from DEV to QAS.
    Obligatory transport target for business system MDD_BS not found in System Landscape Directory
    The particular scenario was done by creating a business service MDD_BS for the MDM in SLD. There is no QAS server for MDM and we are using the same MDM server for both DEV as well as QAS. I created two groups in SLD, Group one for Business systems pointing to DEV and Group two for Business systems pointing to QAS. In SLD, Group two, there is no matching Business system for MDD_BS in QAS.
    I tried to edit Group two and add the same business system for QAS as well. But I am unable to do so.
    How do I solve this error?
    Harish

    To solve this issue, You can create an MDM BS for QAS Transport Group (something like MDM_BS_QAS and setup this BS in the same way of your MDM_BS_DEV), and add it to trasport target tab for MDM_BS_DEV.
    Use it only for "logical" purpose.
    Business System is only a logical senders or receivers that exchange messages by using the Integration Server.

  • Transport error while exporting swf to enterprise

    Hi all,
    OLD scenario : Server OS :  Windows2003, BO  XI3.1   Client OS : Windows XP , all BO lcient tools and Xcelsius 2008 ..system works fine in all respects
    New Scenario : Server OS upgraded to Windows 2008 with out doing any modifications on the running applicaitions.
    All client tools are able to connect to BO Application including designer, deski , importwizrd, webirichclient with EXCEPTION Xelcius 2008.
    In Xcelsius 2008 with SP1 --> while tring to export to Business objects platform, upon giving username and password and authenticationi (any) ...waits for 3-4 sec ...pops up " Transport Error : Communication Failure" .... same error while importing also ..application is not getting response from server ...
    pls guide ...thnx ..
    .kishore

    Sorry for delayed update .The Issue is resolved after un-checking auto assign port to CMS and assigning port number manually.

  • Error while saving for Objective setting

    Hi,
    While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
    <u>Error documentation is as follows</u>
    <b>Diagnosis</b>
    Entries in table HRPAD605 cannot be edited in connection with customizing object PDST      T as table HRPAD605 does not belong to customizing object PDST      T, according to the object definition.
    <b>System Response</b>
    The function terminates.
    <b>Procedure</b>
    Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
    Correct the object definition or the entry for the Transport Organizer interface.
    Thanks

    Hello,
    Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
    Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
    The report RHSOBJCH corrects the missing HR entries in the OBJS table.
    This step you need to perform only once. For OSA you need to overtake
    *5020 up to *5026, also PAD605,606 and 607 references.
    When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
    Hope this helps,
    Regards and Groetjes,
    Maurice

Maybe you are looking for