Transport for DB connect datasource

Hi
I have a query for DB connect datasources.
I have created datasources for ORACLE quality system in SAP BI DEV. If I transported all the objects from SAP DEV to SAP prod directly is there be any problem?
Or I need to create the same datasource also for Oracle production system.
Can anybody through a light how object transport happens in DB coonect scenario.
Thanks
Debasish

Hi,
As your scenario, i can understand that you have got :
Oracle Quality connected with the BW Development.
So if you transport BW Development to your BW Production, then there should atleast
Oracle Production connected with the BW Production. (As your data Source created is based on the oracle system)."if this is the scenario in your case then transport your Table or view from Oracle Dev to Oracle Prod"
Now you have to more specific that what kind of connection you have in your BW Production with oracle.
Hope This Helps.
Regards,
Soumyadeep.

Similar Messages

Shall I use one datasource for multiple connection pool?

Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
Suresh

No. If its transactions across multiple databases you should use different datasources.

No key field found for creation of DataSource - Classification Datasource

Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regards

Hi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object   field
0PLANT       WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM

Transport for System Copy from RSA1 in BW 3.5

Hi Guys,
I am not able to create transport for Source system objects for system copy in RSA1.
I have copied the production system(BWP) to sandbox(BWQ) and want to connect to same source system.
According to note 886102 when creating transport for Source system objects I am getting following error.
You cannot use request BWQK900020
Object ISIP ZPAK_5FKMUFOSQPPRNYYDZV1U6A7W0 could not be saved to order
BWQK900020
This is stand alone system but for transports I have created virtual system. Before creating virtual system I am able to create transports. But now after creating virtual systems I am not able to get pass above errors.
Any help would be appreciated also with points.
regards,
Santosh

Hi,
Check the notes 140276 and 325470 to chart out a plan of action.
BR/
Mathew.

Set password for database connection at runtime

Hi there,
is it possible to set the password and/or the user for the database connection at runtime.
The use case is to read the values from a file and decrypt them, and the to establish the conenction. So that i don't habe to redeploy everything if there is a change.
Thanks in advance.

How exactly do i set these values for the datasource?
Edited by: Alex on 15.02.2012 09:50
€: JDeveloper 11.1.1.5.0
The use case is, that there is a file with an encrypted password. This should be decrypted and then be used for the connection. So when this encrypted passowrd changes, i don't want to edit and deploay the app once again. Instead the new encrypted password should be decrypted via code an then be used.
Edited by: Alex on 15.02.2012 10:00

Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
  <Application>
   <Name>ReportServerWebService</Name>
   <VirtualDirectory>ReportServer</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
  <Application>
   <Name>ReportManager</Name>
   <VirtualDirectory>Reports</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
</URLReservations>
<Authentication>
  <AuthenticationTypes>
   <RSWindowsNegotiate/>
   <RSWindowsNTLM/>
  </AuthenticationTypes>
  <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
  <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
  <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
  <IsSchedulingService>True</IsSchedulingService>
  <IsNotificationService>True</IsNotificationService>
  <IsEventService>True</IsEventService>
  <PollingInterval>10</PollingInterval>
  <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
  <MemorySafetyMargin>80</MemorySafetyMargin>
  <MemoryThreshold>90</MemoryThreshold>
  <RecycleTime>720</RecycleTime>
  <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
  <MaxQueueThreads>0</MaxQueueThreads>
  <UrlRoot>http://abraham/Reports</UrlRoot>
  <UnattendedExecutionAccount>
   <UserName></UserName>
   <Password></Password>
   <Domain></Domain>
  </UnattendedExecutionAccount>
  <PolicyLevel>rssrvpolicy.config</PolicyLevel>
  <IsWebServiceEnabled>True</IsWebServiceEnabled>
  <IsReportManagerEnabled>True</IsReportManagerEnabled>
  <FileShareStorageLocation>
   <Path>
   </Path>
  </FileShareStorageLocation>
</Service>
<UI>
  <ReportServerUrl>
  </ReportServerUrl>
  <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
  <Delivery>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <FileShareConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </FileShareConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <RSEmailDPConfiguration>
      <SMTPServer>192.168.11.210</SMTPServer>
      <SMTPServerPort></SMTPServerPort>
      <SMTPAccountName>
      </SMTPAccountName>
      <SMTPConnectionTimeout>
      </SMTPConnectionTimeout>
      <SMTPServerPickupDirectory>
      </SMTPServerPickupDirectory>
      <SMTPUseSSL>
      </SMTPUseSSL>
      <SendUsing>2</SendUsing>
      <SMTPAuthenticate>
      </SMTPAuthenticate>
      <From>[email protected]</From>
      <EmbeddedRenderFormats>
       <RenderingExtension>MHTML</RenderingExtension>
      </EmbeddedRenderFormats>
      <PrivilegedUserRenderFormats>
      </PrivilegedUserRenderFormats>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
      <SendEmailToUserAlias>True</SendEmailToUserAlias>
      <DefaultHostName>
      </DefaultHostName>
      <PermittedHosts>
      </PermittedHosts>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <DocumentLibraryConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </DocumentLibraryConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
  </Delivery>
  <DeliveryUI>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>
     <RSEmailDPConfiguration>
      <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
  </DeliveryUI>
  <Render>
   <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
   <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
   <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
   <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
   <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
   <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
   <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
   <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
  </Render>
  <Data>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
   <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
  </Data>
  <SemanticQuery>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
     <EnableUnistr>False</EnableUnistr>
     <DisableTSTruncation>False</DisableTSTruncation>
    </Configuration>
   </Extension>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
    </Configuration>
   </Extension>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
  </SemanticQuery>
  <ModelGeneration>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
  </ModelGeneration>
  <Security>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
  </Security>
  <Authentication>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
  </Authentication>
  <EventProcessing>
   <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
    <Event>
     <Type>ReportHistorySnapshotCreated</Type>
    </Event>
   </Extension>
   <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
    <Event>
     <Type>TimedSubscription</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
    <Event>
     <Type>RefreshCache</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
    <Event>
     <Type>SnapshotUpdated</Type>
    </Event>
   </Extension>
  </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
  <MaxConnections>2</MaxConnections>
  <Timeout>10</Timeout>
  <AppID>(Default)</AppID>
  <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

Original System for transformations and DataSources

Dear All,
I have imported all DataSources and transformations from DEV box into QAS box. Transports ended without errors and they are working fine.
I have the following questions, when check the Object Directory Entry (RSA1->Extras-> Object directory entry) for transformations and DataSources the Original System is QAS.
Should not the original system be DEV?
Transformations technical names in QAS are not the same as in DEV. Should not they have identical technical names?
Details:
BI70 SAP NetWeaver 2004s
Support Packge 10
Thanks,
Carlos Weffer

Transfornations' technical names change is normal.
Also, when you see the object directory, the sysytem will eb Qa only as you would have converted the source system while transporting.
Ravi Thothadri

Enhance UD connect Datasource

Hi Experts,
we are creating a UD connect Datasource based on a View which has 10 fields.
Now we want to add an extra field in the Datasource which is not present in the View (which we are using to create the datasource), please advice how to achieve this.
I am not able to add the extra field in the UD Connect datasource. Same thing i was able to do when the source is Flat File.
Thanks in advance.
Regards,
Rk.

Hi M,
Thanks for the reply,
The field is already available in the Data Target. Reason for adding this in Datasource is that for reporting purpose we are modifying the source record such that each record is converted to 19 records while transformations.
Along with this we have some validations to be done which will consume less time if done before the above conversion or columns to rows.
Is there any way we can add that field in the DataSource?
Regards,
Rk.

Failed to send email report ,The transport failed to connect to the server

HI i have to automate my report using sub
1.I have configured SMTP server in the configuration settings
2. I have created subscitption using my report,But i here i will found one error.
Please find the
failed to send email report ,The transport failed to connect to the server
and can u please help me out for this
when i check in the loge files it will show this error below
No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ;

I have change the settings as u suggested but still not able to send the mail .
its shows me the same error mesg
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__02_10_2015_03_44_06.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>10420</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!28d0!02/10/2015-03:44:06:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!28d0!02/10/2015-03:44:06:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!28d0!02/10/2015-03:44:06:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!28f4!02/10/2015-03:44:06:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!28f4!02/10/2015-03:44:06:: i INFO: Recycling the service from the default domain
rshost!rshost!28f4!02/10/2015-03:44:17:: i INFO: Application domain type WindowsService statistics: created: 10, unloaded: 10, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:17:: i INFO: Appdomain:12 WindowsService_10 started.
library!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_10!28f4!02/10/2015-03:44:17:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_10!28f4!02/10/2015-03:44:18:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_9!28f4!02/10/2015-03:44:18:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 unregistered.
appdomainmanager!DefaultDomain!28f4!02/10/2015-03:44:18:: i INFO: Appdomain:11 WindowsService_9 unloading.
appdomainmanager!DefaultDomain!e24!02/10/2015-03:44:18:: i INFO: AppDomain:11 0 pending unload(s)
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_10!19f0!02/10/2015-03:44:18:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!1ca8!02/10/2015-10:55:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
This is my Logfile can u pls go through it and resolve my issue.

Error when creatiing transport for process chain

Hi Experts,
I am trying to create a transport for a process chain, but when i click on the red truck i get the following error: Error in Object Editing: Edit objects seperately since they belong to different original systems.
Can you please advise me on how to resolve this issue? Thanks in advance.

Has this process chain or some components of it (for example IPAK) been brought from some other system?
Try collecting all the objects in RSA1/Transport connection - and see the directory entries for each subobject (txnSE03 or TADIR table). You may have to either change the source system for some objects (in SE03) or split the transport objects manually into multiple transports.

Coding for DB connect

Hi All,
I am new to SAP BW and trying to gather as much as I can when reading topics and looking to you all to gather the knowledge.
Can anyone tell me what is the ABAP code that needs to be put in place for DB connect. I am aware of the procedure , but have no idea of the preparation that needs to be done in BW and also the ABAP code that needs to be done.
Thanks in advance
Amit

it's very simple :
RSA1 -> SourceSystems -> right window RMB on SourceSystems -> Create ... -> Databasesystems -> type in the qualifier for your systemj in BW
On the next screen you can choose your Databasesystem and your User.
Type in the PIN twice and then the connection-Info, depending on your DBMS, b.e. for an ORACLE-System type in your Database-Connection you want out of your TNSNAMES.ORA.
Select afterwards your table/view, create a DataSource. Voilá, that's all.
A little hint. Don't forget synchronizing your connection on all your Systems (DEV, QAS, PRD), otherwise you'll waste a lot of time searching for this completely superfluos bug
Bye
Ralf

Failure sending mail: The transport failed to connect to the server.

Hi I have created Emailsubscription first time in my production server ,am facing this issue ,subscription were not created ,its shows me the follwing error.We did everything fine.
HI I have Configured Configuration settings properly ,
I have did the sMTP settings correctly,
I have facing this error since a long while.
Failure sending mail: The transport failed to connect to the server.
In my log file i have found these are the errors and warnings.
1.library!DefaultDomain!3738!04/23/2015-12:28:38:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
2.library!DefaultDomain!3738!04/23/2015-12:28:38:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
3.notification!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error occured processing subscription 3efe998d-0c40-460e-bc13-00f6c8d0a7f8: Failure sending mail: The transport failed to connect to the server.
4.emailextension!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error sending email. System.Runtime.InteropServices.COMException (0x80040213): The transport failed to connect to the server.
5. library!ReportServer_0-4!2368!04/23/2015-12:52:30:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
6.extensionfactory!ReportManager_0-3!1224!04/23/2015-12:52:31:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
7.library!ReportServer_0-2!331c!04/23/2015-12:25:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
please go through this errors and give me the right soluction to this..
Awaitng for your reply's

Hi Ychinnari,
According to your description, the subscription is failed to send an email with error “Failure sending mail: The transport failed to connect to the server.”.
In your scenario, though you have mentioned you have configured the SMTP and E-mail delivery correctly, please also check those settings according to official documents below to avoid small mistakes:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
How to Use Telnet to Test SMTP Communication
Also please check if you have specified the correct E-mail Settings in Report Server Configuration Manager refer to this article:
E-mail Settings - Configuration Manager (SSRS Native Mode).
Finally, please check if you have installed an antivirus on the SSRS server. And check if any firewall role blocks the connection between report server and SMTP.
Reference:
Failure sending mail: The transport failed to connect to the server
SCOM: Report Subscription “Failure sending mail: The transport failed to connect to the server”
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Shorting the timeout for socket connection

Hi everyone, i've got a client who owns a handle to a remote object. When the remote object quits, accesing it through a method invocation throws a java.net.SocketTimeoutException: Read timed out. That's fair, what's up is that it lasts about six seconds in sending it, and i would like to shorten the time it waits until it realises it can't connect. I've tried with sun.rmi.transport.connectionTimeout and sun.rmi.transport.tcp.readTimeout, and no success. Any idea?
Thanks in advance.

The "sun.rmi.transport.proxy.connectTimeout" parameter works only when HTTP is used.
We do it manually by utilizing RMI client and server socket factories and setting socket options as appropriate. For the connect timeout, there is connect(SocketAddress endpoint, int timeout) method of the Socket class. With this approach, the application has a full control over sockets used by the RMI engine.

ASA 5505 configured for WebVPN connecting to Citrix Web Interface

ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.

Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay

Transport for DB connect datasource

Similar Messages

Maybe you are looking for