Transport inconsistency for PCD contents

Hi All,
We are working on EP7.0 SP17. We are using Export tool for Portal Transport from Dev environment to QA.
One thing to be noticed that initially we transported a page with 2 iviews. The Page was successfully imported in QA env.
Later we edited the page by deleting an iview from it and transported the same page again. This time we found that the page is not getting overwritten in QA.It is still displaying 2 iviews. Besided setting Overwrite properyty as ALL durinh import, we are still facing this issue.
Tried several times but didnt work. Has anyone faced a situation like this while PCD Export Import, please share.
Thanks,
Archana

Hi Avik,
The problem occurs in those pages that have been updated later by adding new ivews. I think some of the pages may include iviews whose id has changed.
The page IDs are still same.
Thanks,
Archana

Similar Messages

  • Transport request for Business Content

    Hi SDN Gurus,
    We have a Fresh BI 7.0 System and we are Doing a CRM implementation project. This requires standard Business Content related to CRM opportunity and Activity cubes. I have installed(Activated) the relevant Business Content for the same. As this is my Development system for demo purpose all the relevant Business Content objects are stored in $tmp package.
    My Question is whether we need to allocate a separate package and Request for Transporting the same(All the Activated Business Content) to QA system or only custom created Objects required to be Transported as a new request to QA.
    Please clarify whether the same Objects ($temp business content) will be available in the QA in activated state or we need to Activate the Business Content in QA also.
    Any help will be rewarded.
    Thanks
    Vish

    Hi Vishwanath,
    You need to put(collect) all the business content objects along with your custom created objects in a separate package and put them in a new request.
    The business content will be activated in Quality system only when you activate these in Development and transport it to Quality.
    Regards
    Prasad
    Message was edited by: Prasad Sarolkar
    Message was edited by: Prasad Sarolkar
    Message was edited by: Prasad Sarolkar

  • Transport Movement for BI Content Installation

    Hi All,
    We are working on BW 3.5 version. Yesterday I have Installed BI Content Infosource 2LIS_12_VCITM for a previously Inactive DataSourcre 2LIS_12_VCITM.  I followed below steps:
    1. Activated 2LIS_12_VCITM in RSA5
    2. Activation and Maintenance in LBWE and filled Setup tables
    3. Replicated DS
    4. Installed BI Content for InfoSource 2LIS_12_VCITM (Used All downwards option)
    5. Created a Customized ODS and Multiprovider
    6. Created Delta Initialialization and Loaded data successfully
    I didn't care in capturing the TRs properly and it's a mess now.
    I again want to individually capture each objects in TR. Please suggest how I should go ahead with it.
    Regards,
    Vivek Das Gupta

    Hi Sharayu,
    Please correct me if I'm wrong. I'm thinking of following the below procedure.
    Capture RSA5 activation in TR1
    Capture Activation and Maintenace of LBWE in TR2
    RSA6 Activation in TR3
    Replicate
    Individual TR for all BW Objects
    Regards,
    Vivek

  • Best Practices For Portal Content Objects Transport System

    Hi All,
    I am going to make some documentation on Transport Sytem for Portal content objects in Best Practices.
    Please help in out and send me some documents related to SAP Best Practices for transport  for Portal Content Objects.
    Thanks,
    Iqbal Ahmad
    Edited by: Iqbal Ahmad on Sep 15, 2008 6:31 PM

    Hi Iqbal,
    Hope you are doing good
    Well, have a look at these links.
    http://help.sap.com/saphelp_nw04/helpdata/en/91/4931eca9ef05449bfe272289d20b37/frameset.htm
    This document, gives a detailed description.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f570c7ee-0901-0010-269b-f743aefad0db
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • PCD Content Transport Issues

    Hi All,
    We have an issue while transporting PCD content.
    The PCD content is the delta link copy of the Business Package (from Content Provided by SAP folder). We have copied the standard content to custom folder as delta link and did few modifications on the roles.
    NOTE: The name space of the PCD content is not changed. It remains "com.sap.pct"
    We were able to transport this successfully to the quality portals earlier via CTS transport process.
    Now, we had a change to make in the development and after making the change when we are trying to transport the content via CTS, it is not getting imported to the Q portals.
    I have searched on the transport set up and limitations and came to know that any PCD object with sap namespace would not be exported to the package. But, I was able to export the content to the transport request earlier as well as now. Earlier, when we did this, it got successfully imported to the Q portals. But, now it is throwing error.
    We are using SAP NW Portal 7.3.
    ****Also, can any one please help me understand if this transport limitation of not able to transport PCD objects with sap namespace applies to 'File System' mode of transport as well? I am asking this because we are able to transport successfully via File System transport.
    Thanks in advance for all your replies and support regarding this.
    Regards,
    Murthy.

    hi
    You can only export resource bundles if you have write permission for these objects. You can find resource bundles in the Portal Catalog by calling them with System Administration ® Permissions. All administrators other than the superadministrator can access the folder for the resource bundles as „read-only“ in the standard delivery.
    See also Note 725797.
    please go through links
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/772240da03e569e10000000a155106/content.htm.hope this hellps you.please don,t forget to give points
    with regards
    subrato kundu

  • Transport strategy for your transport landscape is inconsistent

    Hello everybody,
    we had 4 system landscape.
    DEV>QAS>TST-->PRD.
    we move the request from DDEV >QAS>TST and then forward request from TST to PRD system.
    Now, we have delete the system TST from TMS, after deletion it give the warning.
    Transport strategy for your transport landscape is inconsistent.
    Message No. XT481
    Please suggest, what is meaning of this warning and how to correct.
    Thanks
    Ganesh

    You need to do following
    1. Logon to domain controller client 000 -->STMS --> Overview System --> Select TST --> SAP System --> Delete
    2. Reconfigure STMS  DEV>QAS>PRD
    3.STMS --> Overview Transport Routes  --> Configuration --> Distribute and Activate (To All System)
    Note : You should do this from Domain Controller client 000
    I assumed you know Step 2. If you dont please let me know i can guide you on that as well
    Cheers !
    Manish

  • Transport target for business system not found in System Landscape Director

    Folks,
    We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
    We are getting following error when we try to import an interfaces in to new PID system:
    Import failed because of business system transfer object
    Communication component XID_FileSystem: Obligatory
    transport target for business system XID_FileSystem not found in
    System Landscape Directory
    We are yet to install PIQ system.
    All the interfaces in the old XID system have transport target of XIQ system.  I removed the  transport taget for the interface, but transport target is still showing in the Business system under transport target head.
    How can we overcome this issue as we will not have PIQ system atleast for two weeks.
    Thanks in advance,
    Regards
    Chandu

    Hi,
    You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
    Illustrated with DEv & PRD here.
    Procedure:
    1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
    2) Call SLD (System Landscape Directory) Component from the Integration builder
    Save all the Following .zip files on the Local Desktop
    3) Select the Software Component & say Export that you want to Export from DEV
    Server to Production server and which is going to use in the IR of XI
    4) Also Select the Product of the above SWC and say Export
    5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
    6) Select the Business System(s) & say Export; those are associated with above Exported
    Technical systems.
    In Production Server
    1) Logon to the SLD of the Production Server.
    2) Create a Technical System and Business system which points to the Production SAP R/3
    3) Go to Administration TAB in the main page of SLD
    4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
    5) Click on Browse and select the .zip files that is to Import into Production Server,
    Which were stored on the local desktop at the time of DEV Server Export
    And say Import Selected File Option
    By this we exported and imported the SLD Objects
    Now we have to create transport groups and transport targets in the Production server of SLD
    Creation of Transport Groups
    Edit GroupsGroup1) Select the Business systems 
    2) Click on New Group and give the name of the group as DEV_group & select the
    Corresponding Development serveru2019s integration Server
    3) Similar way create another group for Production serveru2019s business system as
    PRD_group and select the Production serveru2019s integration Server
    Creation of transport targets
    This is to Define which business systems in two different groups correspond to each other
    1) Select each Business system in the SLD and select transport TAB---click on
    Add/Change Target and select its corresponding target business system.
    For Example:
    If you select the business system of Production XI server means
    In the target you have to select group as DEVGROUP and the business system of Development XI server.
    Like this do the same for other business systems also
    Ex:
    BS_PRD_Integration Server----
    BS_DEV_Inetration Server
    How to create Transport Groups & transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards
    Seshagiri

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • How do I AUTOMATICALLY generate Transport request for a Z table data?

    Hello friends,
    I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
    Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
    So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
    Any ideas?
    Your help is greatly appreciated.

    You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
    In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
    Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
    Also change the "delivery class' in the table attributes to 'C' - Customizing table

  • Email Notification need anyone changes the PCD content..

    Hello,
    Can someone give me a solution for this issue.
    An email should be sent to a person if someone has changed the PCD content. Can be an iveiw property, role property, workset property etc,.
    Or if any thing is created or modified in PCD i should get an email notification that so and so content has been modified by so and so person.
    Regards,
    Krishna

    Hello Krishna,
    As far as regarding to your question there is no built in functionality with portal. Email notification for subscription and notification service can be configured in the portal as:
    Sys admin - System Configuration - Knowledge Management-Content Management - Utilities-channels - email channels  by this you can configure the communication channels available in the portal. However this is used to send information to the users.
    Also the email notifications are used in the User Management where the user profile changes can be tracked by the Administrator, similarly for tasks and notification's we can configure the UWL for the email communication.
    Some of the useful links are:
    /thread/34939 [original link is broken]
    EP-Email Configuration
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2678e05a-0701-0010-fa86-ddfbec5a2b94
    Outlook Email Based Approval
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d6bdc790-0201-0010-4597-da11d5f9e5a1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41d59a90-0201-0010-ba9d-e1c5c0078a71
    Creating An Import File For UME From Excel
    In these there are threads which explain you some concepts of Collaboration rooms by which you can track the details of PCD and also like the System landscape monitoring.
    I hope this information would give you an idea as of how email channel could be used in portal where in as specific to your question i think we need to build an application and try integrate it with portal to test it.
    Thanks,
    Aparna
    'Please reward point if helpful'

  • Problems with Pcd Content after restore EP Portal with online Backup

    Dear Colleagues,
    We have problems to show Pcd Content (Browse and Search) of the Content Administration tab of the EP Portal after restore with a online Backup during Disaster Recovery Test.
    Restore has become on a mirror system of Production environment. Ours EP Portal is a cluster system with the following configuration:
    Production landscape:
    Node 1
    Disk K:\ SAP SCS directory. (Clustered)
    Disk E:\ SAP Central Instance directory (Local)
    Node 2
    Disk E:\ SAP Dialogue Instance directory (Local)
    Disk M:\ SQL Datafiles. (Clustered)
    Disk L:\ SQL Logfiles. (Clustered)
    Disaster Recovery landscape:
    Only a Node
    Disk K:\ SAP SCS directory. (Clustered)
    Disk E:\ SAP Central Instance directory (Local)
    Disk M:\ SQL Datafiles
    Disk L:\ SQL Logfiles
    Portal Version
    J2EE Engine = 6.40 PatchLevel 105424.313
    Portal = 6.0.18.0.0
    After restore, the data base as the SAP application starts
    correctly but when logon in the Portal, the Pcd Content of Content Administration tab
    and to other tabs with similar information is not shown.
    After restore it can be necessary to reactivate some type of configuration, links, etc?, for this type of restore is better to make a backup offline instead of online one?
    We are thankful for any information on the matter.
    Thanks,
    Regards.
    Rafa R.R.

    The issue was solved with a offline backup.

  • Integrating PCD Content into Web Page Composer

    Hi,
    I am following the link to [wpc link|http://help.sap.com/saphelp_nw70/helpdata/EN/06/4776399abf4b73945acb8fb4f41473/frameset.htm] to integrate PCD Content into WPC.
    I have deactivated "Hide in Root Folder " check in PCD Repository properties in KM and restarted the portal server. Still I am not able to create an entry point the for the portal content (logged in as 'administrator'). Is there any other settings I am missing?

    For creating site specific entry points, I could see the following procedure in the SAP Help ddocs
      1.      Navigate to the /Web Content/Sites//Entry Points folder.
           2.      Choose New ® Link.
           3.      Choose Browse... and select the folder containing shared Web content.
           4.      Enter a name for the entry point to appear in the Web content browser and choose Save.
    Is this not working out?
    Or do you need anything else?
    Thanks
    Avik

  • Create PCD content

    Hi all,
    I have to develop a Web Dynpro tool which should create PCD content. Do you know where I can get more information about the PCD structure and how to implement new content in this structure? Where can I find code samples or tutorials for that?
    Thanx and regards,
    Thomas

    Hi Thomas,
    see http://help.sap.com/saphelp_nw04/helpdata/de/df/eb5c42da4de92ce10000000a1550b0/frameset.htm and around. Anyhow, using WD for portal internals does not sound very reasonable.
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

  • Creating transport package for CRM Business Package

    Hi there,
    I have recently installed the CRM Business Packages 60.2 onto our EP6.0 SP2 server.  I have also performed quite a lot of configuration on the portal e.g. creating new roles, worksets, iviews etc.
    We have now installed a new EP6 server which is running on EP6 SP12.  I now need to install the CRM Business Packages 60.2 along with my work again onto the new EP server.
    Anyway I have some questions below:
    1) I was wondering whether I could create various 'Transport Packages' using the Transport > Export functionality under the System Administration tab.  So if I create Transport packages which contains the CRM business packages, export these to the server, then on the new EP6 server import these.  Is this possible or is it advisable to install the CRM business package again.
    2) In addition to this say for example I could create transport packages for the CRM business package, can I also create transport packages for the new roles, iView etc I created and import these into the new EP server?
    3) If say I decided to install the CRM Business Package onto the new EP server, but then I imported my work from the old EP server (i.e. new roles/worksets etc) into the new EP server, would this work.  Reason I ask is because some worksets I used in my new role on the old EP server are delta links to the migrated content.  If I only import my work how does it know where the delta links are pointing to?
    I hope this makes sense.
    Cheers
    JoJo

    Hi JoJo,
    Can you please give me the link of latest version of CRM Business package for EP 6.
    Thanks,
    Padmanaban

  • Transport request for admin cockpit  set-up

    Hi Experts,
    i have to do technical content installation (admin cockpit set up),for this i should create one transport request
    can any one tell me or share the docs how to create a Transport request for admin cockpot set up.
    Regards
    Mrudula

    The process of creating TR is same for cockpit too
    go to se09, create, select customizing or workbench request
    Enter the description, project name if any, and Save
    A transport request number is created automatically with the provided details
    Thanks
    Regards

Maybe you are looking for