Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

Dear Experts,
I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
IMG Activity  Create Planning Layouts for Cost Element Planning
-> ke34
->
CEFORMC
CEFORMF
CEFORMS
CEFORMT
CEFORMV
CEFORMW
CEPRINT
CESETS
TKEBS 
TKEP1 
TKEP2 
TKES1 
TKES2 
TKES4 
TKES5 
TKESK 
The transport worked without error.
Unfortunately none of the layouts arrives in test environment.
Do you have any idea of what I could have forgotten?
Thanks a lot!!
Thomas

After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
       1.      Log onto the system in the desired target client.
       2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
       3.      Then start importing the objects.

Similar Messages

  • Moving Planning areas and Planning books from SCM 4.0 to SCM 5.1

    Hello Experts,
    Can anyone have idea of how to transport planning areas and Planning book from SCM 4.0 to SCM 5.1.
    Do we need any prerequisite to Transport Planning area and Planning book from Lower version (SCM 4.0) to higher version SCM 5.1.
    Any suggestion could be very helpful for me.
    Thanks!
    Best Regards,

    I have never done this, but I suspect it might be tad easier to just recreate them in 5.1 There are scores of tables that Planning Book configuration lies in. I would not rely on a transport mechanism working across versions to migrate every bit of the configuration accurately.

  • Planning function and planning sequence of Design studio new features!!

    Hi Experts
    Recently I have updated my design studio to 1.3 and happy to see many new updates. Meanwhile i saw some new features add planning function and planning sequence.
    As per my understanding, Using this features we can enter data at run time. My query is here
    Is it like we are entering data at run time and see the changes in current data(chart series)
    Ex: Add discount for product 10% and relevant data(in chart) reduced to 10%
    or
    Is it like integrated planning? Once we enter data in run time and it saves in BW planning cube?
    I am totally confused with this feature.. Can any one help me to get clear understanding on this please !
    Regards,
    Mathivanan M

    Hi,
    maybe these two article can help you:
    #1 Planning in Design Studio 1.3
    #2 Planning in DS 1.3 - Using different script methods for planning
    As i unterstand, it's only possible to write back in BW.
    Best Regards 
    Sebastian

  • Creating Planning layout and profile in Integated planning

    Hello,
    We have a requirement  like to craete a planning profile and planning Layout in in bi(Planning profile and Planning layout concept like bps) in Integrated Planning.We want to know what is the corresponding structures in Integrated Planning for planning profile and planning Layout .The requirement is in CRM once we create the structure crm will use the same for acessing the data.
    If any one has already worked on that or having any doc please give ur suggestions .
    Thanks in advance
    sr

    Hi,
    Stand corrected.
    Have you looked at the below thread
    Re: Trade promotional planning CRM and BPS

  • How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

    Hi,
    I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
    How to retrieve Planned Cost that based on the Cost Plan Version ?
    Appreciate helps. Thanks.
    Regards,
    See Mun

    Plan versions:   A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
    Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
    Plan version 1 is used for the planning...
    How to see the  same in CJE5 is suggested by Virendra..
    However there is no filed name planned cost  in report but the name of the filed is Proj.cost sched.000
    with which you can achieve your result.
    path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the  right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
    similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
    Regards
    Nitin
    Edited by: Nitin  Patoliya on Jan 17, 2009 11:18 AM

  • Planning Level and Planning Group empty

    Hello
    We have recently activated EA-FIN (Financials Extension) in our client´s SAP system (ECC 6.0) to implement Liquidity Planner via transaction SFW5.
    After this activation, we found that SAP is not updating fields of planning level (FDLEV) and planning group (FDGRP) in BSEG for relevant  FI document postings, these fields are empty after FI document postings. We don´t no this is because of activation of EA-FIN or some customizing parameters of Liquidity Planner. We were not able to find any SAP notes for this issue. Can anybody help out please.
    Thanks and regards
    Srinivas

    HI,
    Directly EA-FIN doesn't have any impact on said issue. EA-FIN activation is mandatory for any TRM implementation and the said fields are updated properly in the documents without any issue.
    You can try one option since you activated EA-FIN in between. Run Tcode -FDFD which will update all cash managment related flows and fields at both FI & TRM areas.
    Please confirm the testing of FDFD in test system before executing the same in Live System.
    Regards
    Prasad AV

  • Planning horizon and planning time fence

    What is the meaning of terms
    - planning horizon.
    - planning time fence.
    Where and how we can use these terms?
    Kindly explain with a example.

    Hi,
    1. planning horizon
    Net change planning in the system only plans materials that have undergone a change that is relevant to the planning run within the period which you defined as the planning horizon. The system sets the net change planning horizon indicator automatically for these materials.
    In net change planning in the planning horizon, the system only plans those materials provided with the net change planning horizon indicator.
    2. planning time fence
    The planning time fence dictates a firm period for planning purposes. Subsequent MRP runs will not create planned orders within the time fence but will place them just outside it. Orders must be manually moved forward if desired. The idea is to create a short term period of plan stability.Check the MRP tabs on the Material Master for the planning time fence
    period for the material.
    Regards,
    Sankaran

  • Table for Planning area and planning books

    Hi,
            Is there a table that gives the list of planning books associated with a planning area? I want to enter a planning area  and get the planning books associated with it or enter planning book and be able to get the planning area it is in.
    Thanks.

    Hi Raj,
    You can try with transaction ST14,there you find the detail about your planning area and book and macro and so on ..for all the application DP and SNP and CIF.
    Regards,
    Prabhu

  • Function Module to Delimit From and to Date in Cost Center Master Data

    Hi,
    I am using BAPI_COSTCENTER_CHANGE_MULTIPLE to change Cost Centers.
    I am finding a Problem in changing the from and to date.
    When i try to change the validity dates through standard transaction KS02
    they have a Peculiar way of splitting the dates.
    Is there any FM to split these dates?
    Regards
    Manjari

    Hi Manjari
    I think you need to be a bit more descriptive about your issue. Are you trying to say that for the same cost center, you need to have different validity periods in the CSKS table. For eg:
    KOSTL    DATBI     DATAB
    100         23.02.2011     01.02.2011
    100         31.12.9999     24.02.2011
    Let me know if i am getting you correct here.
    If this is the case, then while populating the BAPI table for cost center '100' (as in the example) you need to divide this into two different items. The data will be same for all the BAPI fields except DATAB and DATBI. Let me know if you need a code snippet for this.
    Hope this helps.
    Harsh

  • MF50 : Planning table and planning time fence

    HI,
    I use the transaction MF50 as planning table ( in order to do my MPS planning), I use "set firming date" to fix a firming date.
    Now, I want o know if it should possible to reveal a message when we create a planned order within the firming date??
    Thanks for your answer.

    Hi,
    For clarity , I am describing  below the functionlity of Set Firming date is explained as below:
    By setting Manual Firming date , we extend the planning time fence.
    If a planning time fence has been created for a material then the following applies:
    If the manual firming date lies before the end of the planning time fence, the planning time fence is still valid.
    If the manual firming date lies after the end of the planning time fence, the planning time fence is extended until this date.
    All order proposals with availability dates that lie before the end of the planning time fence of the manually extended planning fence are firmed for the planning run, if the materials have an MRP type which contains firming type or firming type 1 or 2
    The system does not automatically firm order proposals for materials that have an MRP type with firming type 3 or 4, even if their availability dates lie before the end of the planning time fence or manually extended planning time fence.
    Please check if this helps you.
    Regards
    Datta

  • KP06 Plan Values are not updating in Cost center  report

    Hi,
    I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
    But after uploading planned values are not updating in the S_ ALR_87013611 Report.
    What could be the reason.kindly give me some inputs regarding this.
    Thanks
    Supriya

    Hi Supriya,
    After uploading the entries have you saved or have you verified with excel values.
    Please check.
    Sateesh

  • Planning layout for material and cost element

    Dear all,
    i need to upload data from r/3 and start planning from data i have uploaded.
    data is as follows:
    year month material amount
    what i need to do is to put data in planning layout and put cost element next to that and manually enter cost element.
    so desired column is like that:
    year month costelement( enter manually) material amount(enter manually)
    is it possible and how?
    thanks

    Hi,
    You can do it.Take a  look at the best practice  below.It is telling step by step how to do cost center accoıunting planning.
    http://help.sap.com/bp_biv235/bi_en/html/BW/CostCtrPlan.htm
    Regards.

  • Activity prices in KP26 used for actual and plan in version 0

    We plan activity prices via KP26 in version 0. We then plan activity consumption via KP06, and run the plan reconciliation via KPSI.
    During the year, we need to update the activity prices used in actual activity allocation. This price also comes from version 0.
    When we change the activity price, the planned amounts change also. We are looking for a way to maintain a separate price for actual activity allocation.

    Ajay,
    Your answer definitely sent me down the right path...thank you!
    For other's benefit, these are the steps I took to make this work:
    1) set the "Purely Iter. Price" indicator in plan version 0
    2) import planning layout 1-N01 from client 000 (OBKF)
    3) add planning area "Cctr: Manual actual prices" to planning layout SAPALL (KP34)
    4) add planning layout 1-N01 to planner profile SAPALL (KP34)
    5) create and run custom program from note 551309 to add cost element field to the input screen in KBK6 (SE38)
    6) transport planning layout for planning area "Cctr: Manual actual prices" (OKEX)
    Now we can plan a price in KP26, and maintain a different price in KBK6 which is used in the actual activity allocation.
    Thanks again,
    Linda

  • Retreive the values from a user Input Popup before planning layout

    Hi all,
    The user run a planning layout and is coming the popup where he can choose :
    Cost Center
    Currency .
    Is there any function module between executing the popup and showing the layout.
    I have to create a function module to check the entries of the users.
    Regards

    Frank,
    There are multiple ways to ensure that the values entered by the users are valid. A few of them are:
    1. Restrict values for users with in SEM planning area.
    2. Write custom code to restrict values in dropdown list.
    3. Another  way of doing it is by using two sets of variables. One for input by users and the other for passing the values in the planning level. The user would enter a value, the code for passing the value to the planning level, would check the data entered and then either pop up an error message or refresh the layout with the data.
    As mentioned, the approach would depend on the specfic need and the design of the planning application.
    Sunil

  • Planning Layout for Activities

    Good morning gurus,
    my need today is the following:
    I have a dummy activity type with a price manually planned on a dummy cost center
    I have quantities to plan on wbs elements
    I have a planne margin valid for one year
    I want to insert in the planning layout this margin (as statistical key figure or i don't know...)
    Eg:
    - Activity tipe PreConfig01 with planned price 10.000,00u20AC on Cost center Offset_Plan
    - Planned quantities are 10 on WbeXX and 20 on WbeYY
    - My yearly planned margin for 2011 is 20%
    - When i use Tcode CJR2 with layout 1-702 i would obtain 120.000,00u20AC and 240.000,00u20AC as result of my planning, instead of 100.000,00u20AC and 200.000,00u20AC that i get now.
    Does anybody know how can i customize the layout using skf or formulas?
    I don't want to hardcode the margin as a formula in the layout; i want to maintain it as master data in order to easily update it every year.
    Thanks in advance,
    Enrico

    Does anydody know something to in matter?

Maybe you are looking for

  • Streaming from a TV Card

    I have a Hauppauge HVR-1250 HDTV capture card.  I want to stream a local analog channel from my TV card to a web server.  Through the WinTV7 application that came with the TV card, I can tune the card to the desired channel and watch it locally on th

  • Problème arrêt acquisition sur graphique CVI

    bonjour, je refais ce poste car je viens de m'apercevoir que je l'avais mis dans le forum anglais   je fais l'acquisition de température en continue mais je souhaiterais l'arrêter aprés un certain temps Le problème c'est que plus je diminue mon sleep

  • Query to get InfoObject(ReportObject) from specific Folder

    Hi, I am using XI Release 2.I am having one report object in two folders with the same name. example: I am having one report object named TestReport that exist in folder ALL as well as folder TEMPORARY in CMS. Following query i am using: "SELECT TOP

  • Relationship between WebDynproContext and Interactive Form (WebDynpro ABAP)

    Hi, I created a WebDynpro application including an interactive form. The context of the view contains a node 'Employeeinfo' with a further node 'Employeerecords' and a Attribute pdfSource. The node Employeerecords contains 2 Attributes: Employeename

  • Problem sqlite+berkeley PANIC: fatal region error detected.

    Excuse for my English and if this wrong place to explain the problem I'm checking to replace Berkeley DB and SQLite for testing the stability against involuntary interruptions of program I have encountered the following error: Berkeley DB trust in kn