Planning Layout for Activities

Good morning gurus,
my need today is the following:
I have a dummy activity type with a price manually planned on a dummy cost center
I have quantities to plan on wbs elements
I have a planne margin valid for one year
I want to insert in the planning layout this margin (as statistical key figure or i don't know...)
Eg:
- Activity tipe PreConfig01 with planned price 10.000,00u20AC on Cost center Offset_Plan
- Planned quantities are 10 on WbeXX and 20 on WbeYY
- My yearly planned margin for 2011 is 20%
- When i use Tcode CJR2 with layout 1-702 i would obtain 120.000,00u20AC and 240.000,00u20AC as result of my planning, instead of 100.000,00u20AC and 200.000,00u20AC that i get now.
Does anybody know how can i customize the layout using skf or formulas?
I don't want to hardcode the margin as a formula in the layout; i want to maintain it as master data in order to easily update it every year.
Thanks in advance,
Enrico

Does anydody know something to in matter?

Similar Messages

Planning Layout for Activity Rate

Hi
My Client is a German Company. Controlling Area currency is EURO, It has operations in India also.
For India, required to create BDC for Activity rate planning.
1. Is it necessary to create separate Planning Layout for INR currency?..I did not find any currency in standard layout.
2. Please explain how it works. whether it takes Cost Center currency or Controlling Area currency?
Regards
Pradeep Veer
Edited by: Pradeep Veer on Feb 9, 2011 7:13 AM

Hi,
The standard setting for the leading currency plans the transaction currency for costs and the controlling area currency for prices. This is the Standard design. Please review 100379 & 183556 for further information on this.
Please pay attention to the following section of note 100379:
'Note: you can only change these settings in the following Transactions: KP97 (as of Release 3.1I) and KP98 (as of Release
4.6), as well as CP97 and CP98 (as of Release 4.6C). However, you should only carry this out after you have taken Note 183556 into account.'
regards
Waman

Planning Layout for Statistical Key

Hello. Good Morning.
Does anybody know how to enter the field Transaction Currency as a variable in a planning layout for Statistical Key?
Please kindly answer me.
Thank you very much.
Best Regards,
Antonio

I try again as you said, it's ok. But I don't know why I can't do like before. Could you help me find the reason. Below lists all the data needed.
Gen. data selection:
Field Name          | Values
Fiscal Year            Variable entry
Period                   Variable entry From To
Company Code      Variable entry
Version                  Variable entry
Statistical Key Fig. Variable entry
data entry columns:
Profit Center | Description | Quantity | Unit |
Thanks in advance.
Alex
Edited by: Alexandro Miao on Jun 2, 2008 10:12 PM
Edited by: Alexandro Miao on Jun 2, 2008 10:13 PM

Planning Layout for WBS Elements

Any one have any idea how to set up the planning layout for WBS ELEMENTS & COST CENTER?
We are trying to plan for WBS elements and Cost center through CJR2 but I don't have any layout designed for this.
Any ideas or suggestions?

I doubt if you can have a single layout for planning both at Cost Centre and WBS level.
But you can create your own layout by copying the standard planning layout under a different name and then change the copy (T code OPO1)
We in our project created a layout with WBS Element (PSPGR) and Cost Element (KAGRU) as Characteristic Values with lead column structure 'Characteristic value and name'.
You then create/assign a Planner Profile>Planning Area>Planning layout using T Code KP34.
Call/change your planner profile (T code KP04) to above before doing the cost planning in CJR2.
Regards
Sreenivas

Planning Layout for WBS

Any one have any idea how to set up the planning layout for WBS ELEMENTS,COST CENTER,?
We are trying to plan for WBS elements and Cost center through CJR2 but I dont have any layout designed for this.
Any ideas or suggestions?

I doubt if you can have a single layout for planning both at Cost Centre and WBS level.
But you can create your own layout by copying the standard planning layout under a different name and then change the copy (T code OPO1)
We in our project created a layout with WBS Element (PSPGR) and Cost Element (KAGRU) as Characteristic Values with lead column structure 'Characteristic value and name'.
You then create/assign a Planner Profile>Planning Area>Planning layout using T Code KP34.
Call/change your planner profile (T code KP04) to above before doing the cost planning in CJR2.
Regards
Sreenivas

How to implemented Planning Layout for other plan

Hi,
I have one planning layout for X plant now I want to use same layout for anothr plant. Can I copy the same layout for another plant...? If yes pleast let me know the step with tr.code.
In this senario what I have to copy Planning area, Level or layout...?
Your help will be highly appreciated. I will assign full mark.
Regards
Manoj

Hello,
Why don't use restrict your layout by a variable based on the plant? This variable could for instance be put on the planning level.
Then just add this variable in your planning application via UPSPM.
The variable can be an authorization variable, exit variable, user specific variable...
Rgds,

Creating Planning Layout for GP12N - Posting Period as columns/rows

I am trying to create new layouts for GP12N, but do not know how to create the integrated layout with one column or one row for each Posting Period 1 - 12. I did read that 'Sets' were not allowed. Can anyone provide the steps necessary to allow Posting Periods as columns or rows?

Hi,
a) Remove period from general data selection.
b) Create 12 columns of the same Key Figure which use the characteristic period and set it as a fixed value

Planning layout for material and cost element

Dear all,
i need to upload data from r/3 and start planning from data i have uploaded.
data is as follows:
year month material amount
what i need to do is to put data in planning layout and put cost element next to that and manually enter cost element.
so desired column is like that:
year month costelement( enter manually) material amount(enter manually)
is it possible and how?
thanks

Hi,
You can do it.Take a look at the best practice below.It is telling step by step how to do cost center accoıunting planning.
http://help.sap.com/bp_biv235/bi_en/html/BW/CostCtrPlan.htm
Regards.

Planning layout for account based CO-PA

Hi Gurus!
I want to create a new planning layout in profitability analysis to be able to maintain planned values directly in profitabilty analysis on cost element level.
But somehow there is no possibility to plan the value in comany code currency. When selecting costing based co-pa and then calling transaction KE16 -> create new layout, you are asked by the system whether you want to plan in Controlling Area currency or also in company code currency. But, when selecvting account based co-pa this is not possible. You can only choose controlling area currency.
Can somebody explain this?
Thanks

What's the reason to do this?

Create User-Defined Planning Layouts for Detailed Planning

Dear All
I would like to change layout of Tcode CJR2.
I must copy planning layout "1-702" because I would like see:
sender cost center definition
sender activity type definition
alloc. cost definition.
what do I do?
Thanks
salvo50

Eli
I know what is already there. I would like to change layout of Tcode CJR2. I must add 3 following columns (display only) to those already there:
1. sender Cost Center Description LTEXT (new column - display only)
2. sender Activity Type Description LTEXT (new column - display only)
3. sender Cost Element Description LTEXT (new column - display only)
So my layout will appear:
sender Cost Center KOSTL
sender Cost Center Description LTEXT (new column - display only)
sender Activity Type LSTAR
sender Activity Type Description LTEXT (new column - display only)
total quantity MEG
sender Cost Element KSTAR
sender Cost Element Description LTEXT (new column - display only)
Is it possible ?
thanks
Salvo50

Help for Planning Layout in 4Th Currency in FI SL Currency 0SL

Dear friend,
One of my customers wants to create one Planning Layout for 4th in FI SL ( Planning in Profit Center), in table FAGLFLEXT but I didn´t find any information how to configure that. I have asked SAP but I did get any good answer from them.
My customer wants to clear some wrong data from this field 0SL currency. I have already did one but SAP inserted 0 for the other currency if I not flaged conversion field. If I flaged this field SAP wants to converte the data.
But for eraser the wrong data in 4th currency we need not converte and not filled the others currency.
Please, could some one send one material to create this layout or t-code for eraser this data?
Best regards and Thanks,
Roberta Fernandes
SAPFICO

Just to ask. Are you coining your own phrase "is not ready for input" or it is the system giving you this message? If it is the system, then the problem lies in your planning layout columns.
I believe you are working with a special purpose ledger. Planning with SPL can sometimes be very tricky. You may want to do the following:
1. Check the Z-tables to see if they contain any data if you've not already done so yet. Especially the Z table which ends with the letter "P".
2. Save the excel sheet as a template with data in text format.
3. Set your planner profile with t.code GLPSET
4. Use GLPLUP to upload your data
I do not believe the problem is with the ledger customizing but hey I may be wrong.
Good Luck,
Elias

User-Defined Planning Layouts - Translations

Hi Experts,
Custom Planning layouts have been created.
I need to translate the form from English to Danish.
This has to be done in the Development system then moved to Quality and Production.
This is how I proceeded with the task:
IMG Path: Project System  Costs  Planned Costs  Manual Cost Planning in WBS  Detailed Planning  Create User-Defined Planning Layouts for Detailed Planning.
Select Change PS Planning Cost Element/Activity Input Layouts.
Select Layout ZMY_LAYOUT  Planning Layout  Translate Form.
Specify Source Lanaguage : EN, Target Language: DA --> Clcik on Translate Button.
There is a prompt for including the request in a Transport Request. If clicked yes it asks for a workbench Request.
I specified the workbench request number.
Select Form --> Object List
Select the line with form name, Source Text --> Click on Translate.
Enter the translation -> Save and exit
However, when I check my request in SE10, it has no objects???
If I repeat the process, and select Transport form, it asks me for a customizing Request.
How can I move my transations from D to Q.
Regards,
Reema Shahbazkar.

Hi,
No it is NOT a unicode system.
Regards,
Reema

Intregarted Planning Design for Non-Cumulative Key Figures

Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.

Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi.

Planning Layout - Library/Reporting Table Assignement ?

Hello,
Anybody knows how to add characteristics/key figures to the ones available in standard when creating a planning layout for manual planning ? Via table KPPT you can deduct that planning areas are asigned to sort of libraries (1P1, 1P2...) but these libraries cannot be found in table T801K.
Thanks for your help.
Regards
Thomas

Paulo,
When you create a new element as you describe, one can select among proposed characteristics/key figures but if I want to use one that is not proposed; is there a solution for that. My precise request is to be able to include budgeted costs in a cost element planning layout.
Thanks and regards
Thomas
Edited by: Thomas Van Aken on Aug 3, 2009 12:03 AM

Planning Layout -KP66 with dynamic period column

Dear experts,
I would like to create a planning layout for cost center/ cost elements in which we have the different periods in the columns .The periods in the columns should dynamically select according to the planning cycle selected in the excel file.
Planning Cycle                           Start Period                                End Period                Total Months
JAN                                         JAN                                           JUN                            6
FEB                                         FEB                                            JUN                            5
MAR                                       MAR                                            JUN                           4
According to planning cycle my period column should change dynamically.Please let us know how to create planning layout with dynamic period columns. I donot want to create the planning layout with 12 period columns to upload the data.
Thanks & Regards
Kumar

NOT ANSWERED

Planning Layout for Activities

Similar Messages

Maybe you are looking for