Transport Order to delete Update Rule

Hi,
we got a problem with a transport order to delete a Update Rule.
- The delete process was saved on a order A with other objects on it.
- Order A was released but not imported.
- Now we need to transport the delete process without the other objects on the order A.
We try creating a new order B and include all the objects from order A, so we can delete on order B the objects that we don't want to transport. The problem is that the update rules copied to order B doesn't have the delete function asigned.
How can we solve it.
thx in adavance.
JP

Hi
In such extreme cases you can change the target directly (QA and P).
you can delete the Upd Rules in QA and P and then just
transport the new Upd Rules.
This is not recommended but some times its the best and easiest solution.
Reg's
Edan

Similar Messages

Unable to delete update rule

Hello All,
When iam deleting an update rule it is not getting deleted and iam getting message saying underlying infosource does not exists .The underlying infosource is deleted long before any way how come deleting update rule depends on infosource. Please give me solution to delete update rule.

Try going into RSRV and choose All Elementary Tests => Database => Database Information about InfoProvider Tables and Databank Paramerters of *-Schema Tables for Infocube.
Those two options may help to correct the inconsistent state the database is currently in.
Another option .. copy your data target as a backup. Delete the data target, then copy it back.
Brian

Update open sales order values. - Update rule.

Hi
In library below information given for the updation of open sales order value in infostructure. Can any one please explaing how can we configure below two rules.
An update rule describes the set up of the open sales order value, i.e., the open sales order quantity. The second update rule describes the reduction of open sales order value, i.e., the open sales order quantity by the corresponding deliveries.
http://help.sap.com/saphelp_47x200/helpdata/en/96/dfec3410b5f563e10000009b38f83b/frameset.htm
Path: LIS - SIS - How the key figures are calculated - open sales order value.
Thanks in advance.
Raj.

Any inputs please.....

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Order of update rules execution of multiple key figures

Can anyone explain the order in which update rules execute if I have 10 key figures and defined one update routine for each key figure?

Hello GKR
This is applicable for yupdate rule as well as transfer rule
start routine executes first ( update rule/transfer routine)
In update rule the rule which u have defined first, executes first...same in transfer rule..the rule which u define first in transfer rule window executes first...
Thanks
Tripple k

Updates rules inactive after add KF

Hi experts,
we have to add aditional key figures to a infocube that is already in Q and P systems (with data).
Now we are not being able to transport the update rules to those systems.
Correct me if i'm wrong but if you add aditional characteristic's or key figures you don't need to delete data in the infoproviders in the ohter systems.
we have already try to transport:
cube and then update rules;
all together cube and update rules
in both cases it fails.
thanks in advance for any sugestion

Varadarajan, our database is in SQL the spaces requirements that you refer are the same for this scenario? The fact table for this infop is 43G in Q system and our database have enough space.
am i making this analysis ok including the Db space?
Praveen the update rules are not datamart's.
The transport ends with a 8 code and for each update rule inlcude gives the message:
Update rules 2237DNCKOFJ13SFIK2PT581MQ read in version M
Error when activating update rule 2237DNCKOFJ13SFIK2PT581MQ
Sadeesh, all necessary objects are in the destiny system and no modifications were made at infosource/data source level.
Thank you all for the answers.

0liv_dso1 update rules

Hi guys
Having problem with 0liv_dso1 update rules.
Im trying to install the routines for the update rule from content. Everything ele is available apart from the routines. Has anybody had this same problem where one routine hasnt been available.
Msg from BI Content
Object 485V83KBEXPI7VUNBAQ0D9UCR (Routine,ROUT) could not be collected for object 0GY4EYDO
Object '485V83KBEXPI7VUNBAQ0D9UCR' (ROUT) of type 'Routine' is not available in version 'D
Im using BI Content 703.
Thanks in advance.
Abu Muhammad.

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

Inactive connection in update rules

Hello,
How do I update my update rules for 0MATERIAL_ATTR in the production system (BW prod)?
I have attempted to transport the update from dev. I have the info object in the uodate rules, but not the connection to the source field.
How do I get the connection active in the update rules?
Best regards,
Fredrik

Frederik,
create new transport from DEV for Update Rules( Make some change in the description or some space in the routine). Transport this request to production it will be rectified.
or try to import the previous transport again. When cube gets changed UR get deactivated. Try to reactivate the UR either by creating new transport or reimport the old one.
Last week i faced the same problem. i reimported the same transport i sloved my problem. one time i created new transport for UR, i imported in Production it's activated my UR.
all the best.
Regards,
Nagesh Ganisetti.

Update Rule in Q not active

Hi SDNers,
when i transported a update rule from D to Q, the update rule still remains inactive. I repeated the transport again and again still it wont change although in D it is active. Even other objects are fine. I did only necessary objects first time and in the repeats i did dataflow b4..Any help??
Thanks
Dave

Hi Dave,
You need to ask your BASIS Team help in this regard.
First you have to identify which trnsports are to be reversed. For Example, The update rules were active until 17 jun 06. On 18 june 06 you transported some new changes to the cube or IS and the update rules were deactivated. Then you created several transports to activate the update rules and they are all failed.
So you have to back the changes upto 17 jun 06.
Once all the transports are reversed you can see the update rules active in QA.
Then you create a fresh transport and apply the changes. Make sure,If you change a cube ot IS, you also have to include UR in your transport.
Hope this helps
Praveen

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Transporting Update Rules

Hi,
I am transporting update rules for a Cube.
The InfoSource has been generated from a DSO and created update rules to the above said Cube.
In the transports I am getting the below error.
Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
Update rules 46H2HBH6BRHP9R29L0XREHQP3 read in version M
Update rules 46HK9D48LBRIH89ZBZVTZERTZ read in version M
Error when activating update rule 46H2HBH6BRHP9R29L0XREHQP3
Activation of the update rules for ZICUBE01 8ZDSO1
IC=ZICUBE01 IS=8ZDSO1 error when checking the update rules
Error when activating update rule 46HK9D48LBRIH89ZBZVTZERTZ
Activation of the update rules for ZICUBE04 8ZDSO04
IC=ZICUBE04 IS=8ZDSO04 error when checking the update rules
The InfoCube(It is already there in Q apd P) has been locked in a different user transport as he added a field to it and not yet transported.
Is this the problem?
Thans in advance..
Message was edited by:
        Indira SR

Hi indira,
make neccessary changes to the request if u created earlier i.e u can delete the original request or change the discrption to "Dont delete" and release it, if u unable to delete each task in that particular request.
Second step is activate all the infosources and cubes and Update rules.
Then create transport request individually i.e One for IS and One IC and another for Update rules..It would be easier to trace in case of any error.
Release the requests 4m DEV, and important thing is import these requests in Q or P in hierachiel manner i.e
1. IS
2. IC
and the Update rules request.

Error in Transporting Update Rules

Hi,
I am transporting ODS, Info package and UPdate Rule from Dev to QA.
I request seems to be fine, but transport ended in error.
ODS, IP and UR got transported , but the UR is inactive.
and i dont havr the permission to activate that in QA system.
What could be the reason for inactive UR in QA.

I have done that also,
But it is giving error as :
Error when activating update rule 49U3N0VD2IJOOELH5APVBBIP1
Activation of the update rules for ZFY6_SDT ZIB_SHIPDAILY_TRAN
IC=ZFY6_SDT IS=ZIB_SHIPDAILY_TRAN error when checking the update rules
Start of the after-import method for object type R3TR UPDR (Delete Mode)
Update rules 49U3N0VD2IJOOELH5APVBBIP1 read in version M
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Please help me out, all the dependent objects are present in the QA
Dependent Objects:
Info Objects
ODS
Info Source
Transfer and comm str
Info pacakge

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error when transporting a transformation (Update rule) BI 7.0

Error when transporting a transformation (Update rule) BI 7.0
Hi all,
Im trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
Transport message:
   Program terminated (job: RDDEXECL, no.: 18141700)
   See job log
   Execution of programs after import (XPRA)
   End date and time: 20070620181432
I go to the log and I got the following message:
Job started
Step 001 started (program RDDEXECL, variant, user ID DDIC)
All DB buffers of application server vrxsapq1 were synchronized
ABAP/4 processor: ASSERTION_FAILED
Job cancelled
Im using BI 7.0
I dont know what it is. Can someone tell what should I do or what Im missing?
Thanks a lot
Regards
Vic

Hi Victor,
check this thread may it solves your problem
Re: Error during the creation of transport request
one more thread
/message/2785863#2785863 [original link is broken]
cheers
Sunil
Message was edited by:
        Sunil John

Transport Order to delete Update Rule

Similar Messages

Maybe you are looking for