Transport Package Import Error/Warning
Hi Experts,
I Created a New Transport Package (SE80) in BI Development and Imported to BI Test System.
I am getting the below Transport warning...What does it mean...can i ignore it
ABAP Dictionary Activation---Result '(4) Ended with Warning'
Log:
No object to be deleted and activated exists
Thanks
hi,
i hope this is due to no objects selected in the package.
try including any object in the package and transport to the testing server and you may not get this warning too.
Ramesh
Similar Messages
-
Transport Reuest import error in BW Live System
Hi,
I raised a transport request in BW Development system for the changes i made to the queries that are already avaliable in Live system.
I imported the request with out error in Quality System and the queries in Quality are updated with the changes i made.
When i import the same request to Live system it is failed with error RC 8.
When i checked the queries one query is updated with the changes i made in Dev system and other is not updated
Error Msg:
Object ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported successfully
Diagnosis
The object R3TR ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported without error.
System Response
Import post-processing is not performed for this object.
Procedure
Examine the import log for this transport request for error messages.
Repeat the import after removing the cause of the errors.
Please update me how to proceed
ThanksOne of the query elements (e.g. Calculated Key Figure, Variable, et. al.) was not captured on your transport and has never been imported into your target environment.
In your development system, go to SE16 and query on table RSZELTDIR to determine which query element the thrown issue is referring to. Use the following parameters for your query:
ELTUID (ID) = 8HV3QPKGUZL61GQH00KRI7369
OBJVERS (Varsion) = A
The MAPNAME (Query) column will give you the name of the query element that you'll need to put on a transport and move through to your target environment. -
Support Package Import Error in ECC 6.0 SR2
Hi,
We tried to upgrade EA-GLTRADE in our ECC 6.0 SR 2 system with
SAPKGPGD07 patch during which, we encounter with some error at
DDIC_ACTIVATION. (Attached: Entire Log)
Note:
We have already updated the Kernal with latest patch and SPAM with
latest version 7.00/0023.
We also applied dependency patches for SAPKGPGD07.
Please give us the steps to resolve it or to reset the Queue so that
atleast we can continue with other patches
Thanks,
Vignesh P,
Log from Log File:
ides\sapmnt\trans\log\SAPAGPGD07.I01
Log File:
ides\sapmnt\trans\log\SAPAGPGD07.I01
ABAP Dictionary: Activation
Transport request : SAPKGPGD07
 System : I01
tp path : tp
Version and release: 370.01.01 700
3T Program start============================================================
Mass Activation
=========================================================================
 Process..................: ides_9
User.....................: DDIC
Date, time...............: 20.04.2007, 17:14:35
Platform.................: CUSTOMER-I01(700)/MSSQL/WindowsNT/ides
Tool.....................: BATCH/RADMASG0
Log......................: F,
ides\sapmnt\trans\tmp\SAPAGPGD07.I01
Program parameters:
Input Medium...............: Transp. Request SAPKGPGD07
Activation Method..........: Inactv.
Chk Mode...................: T
Version to be activated....: M
Versions to be deleted.....: Delete Only Active Versions
Lock Against Paral. Exec...: Shared
Independent Statistics Log.: being written
Parallel Mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
Number of objects to be analyzed: 121
Number of relevant dependencies: 108
Level 1:42 objects assigned, 52 less dependencies
Level 2:34 objects assigned, 35 less dependencies
Level 3:27 objects assigned, 10 less dependencies
Level 4:7 objects assigned, 7 less dependencies
Level 5:7 objects assigned, 4 less dependencies
Level 6:4 objects assigned, 0 less dependencies
Graph_Analysis: 121 objects on 6 topological levels
Start phase 001 **********************************************************
Object Activation
3T *** Activate objects at level 1
Parallel execution with maximal 3 concurrent tasks *
Total of 42 objects with 28.630 costs in 8 tasks
3T Activate data element WB2_DEFAULT_TEW
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_FIELD
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_KBETR_BAPI
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_KBETR_SCALE_BAPI
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_KOMXWRT_BAPI
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_KSTBW_SCALE_BAPI
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activate data element WB2_ORDER_KEY
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Activate table BAPITCCOND
Table BAPITCCOND was activated successfully
Activate table BAPITCCONDCX
Table BAPITCCONDCX was activated successfully
Activate table BAPITCCONDD
Table BAPITCCONDD was activated successfully
Activate table BAPITCCONDDCX
Table BAPITCCONDDCX was activated successfully
Activate table E1BPTCCOND
Table E1BPTCCOND was activated successfully
Activate table E1BPTCCONDCX
Table E1BPTCCONDCX was activated successfully
Activate table E1BPTCCONDD
Table E1BPTCCONDD was activated successfully
Activate table E1BPTCCONDDCX
Table E1BPTCCONDDCX was activated successfully
Activate table KOMEXPENSE
Table KOMEXPENSE was activated successfully
Activate table KOMTCKO
Table KOMTCKO was activated successfully
Activate table KOMTCKOCX
Table KOMTCKOCX was activated successfully
Activate table KOMTCKOE
Table KOMTCKOE was activated successfully
Activate table KOMWBHIE_NEW
Table KOMWBHIE_NEW was activated successfully
Activate table KOMWBHKEX_NEW
Table KOMWBHKEX_NEW was activated successfully
Activate table KOMWBHKE_NEW
Table KOMWBHKE_NEW was activated successfully
Activate table WB2_CHANGED_FIELDS
Table WB2_CHANGED_FIELDS was activated successfully
Activate table WB2_COND_MAP
Table WB2_COND_MAP was activated successfully
Activate table WB2_KONV_SELECT
Table WB2_KONV_SELECT was activated successfully
Activate table WB2_SCALE_EXTERNAL
Table WB2_SCALE_EXTERNAL was activated successfully
Activate table WBHID_NEW
WBHID_NEW-LGOBE: Table KOMWBHI in search help attachment differs from table of search field
Table WBHID_NEW was activated successfully
Activate table WCOCOH
WCOCOH-RATE: Table KOMWCOCOH in search help attachment differs from table of search field
Table WCOCOH was activated successfully
3T Activation of table type T681E_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type T6B2F_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type TB2BN_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type TB2BO_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type TB2BP_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type TWBACCTYPE_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type TWBEXCLASSGROUP_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPIRET2_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_CONDSCALE_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_CONDSCALE_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_KONH_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_KONP_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_KONP_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_VAKE_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Server Usage ************************************************************
Server.............. Workp Tasks Error .Timesum Objcount ms/Obj ..KCosts ms/KCs
ides_I01_00......... ....3 ....8 ..... .....106 ......42 .2.524 ......29 .3.655
 Parallel execution: 38 sec., Phase out time: 8 sec., Load: 9,2982456140350877E+01 percent
3T *** Activate objects at level 2
Parallel execution with maximal 3 concurrent tasks *
Total of 34 objects with 28.040 costs in 8 tasks
Activate table APPEND_KOMWBHKEX
 8R Enhancement category for table missing
8R Enhancement category for include or subtype missing
Table APPEND_KOMWBHKEX was activated with warnings
Activate table BAPITCCONDITIONITEM
Table BAPITCCONDITIONITEM was activated successfully
Activate table BAPITCCONDITIONITEMO
Table BAPITCCONDITIONITEMO was activated successfully
Activate table BAPITCCONDITIONITEMX
Table BAPITCCONDITIONITEMX was activated successfully
Activate table BAPITCCONDITIONKEY
Table BAPITCCONDITIONKEY was activated successfully
Activate table BAPITCCONDITIONKEYO
Table BAPITCCONDITIONKEYO was activated successfully
Activate table BAPITCCONDITIONKEYX
Table BAPITCCONDITIONKEYX was activated successfully
Activate dependent table KOMWBHIE_APPEND
Activation of dependent table KOMWBHIE_APPEND successful
Activate dependent table KOMWBHKE_APPEND
Activation of dependent table KOMWBHKE_APPEND successful
Activate dependent table KOMWCOCOH
Activation of dependent table KOMWCOCOH successful
Activate dependent table KOMWCOCOH_LI
KOMWCOCOH_LI-RATE: Table KOMWCOCOH in search help attachment differs from table of search field
Activation of dependent table KOMWCOCOH_LI successful
Activate table TWGTA
Table TWGTA was activated successfully
Activate table WB2_KOMG
 8O WB2_KOMG-ZZANZ_KG (combination reference table/field WB2_KOMG-ZZME_KG does not exist)
 8O WB2_KOMG-ZZAUFMENG_KG (combination reference table/field WB2_KOMG-ZZME_KG does not exist)
8R Flag: 'Incorrect enhancement category' could not be updated
Table WB2_KOMG was not activated
Activate dependent table WBHID_APPEND
Activation of dependent table WBHID_APPEND successful
3T Activation of table type KOMEXPENSE_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Activate dependent table type TABKOMTCKO
Activate dependent table type TABKOMTCKOCX
3T Activation of table type WB2B_FIELD_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_CHANGED_FIELDS_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_COND_MAP_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_SCALE_EXTERNAL_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Activate dependent table type WCB_WCOCOH_STAB
Activate dependent table type WCB_WCOCOH_TAB
Activate dependent view DB_WCOCOA
 View must be deleted from the database and created again
Activate dependent view DB_WCOCOA_JEST
 View must be deleted from the database and created again
Activate dependent view DB_WCOCOH_I_ST
 View must be deleted from the database and created again
Activate dependent view V_WCOCOA_CUS_LST
Check dependent search help WCB_SH_CC_NUM_CUS_LST_HEADER
Search help WCB_SH_CC_NUM_CUS_LST_HEADER is consistent
 View must be deleted from the database and created again
Activate dependent view V_WCOCOA_VEN_LST
Check dependent search help WCB_SH_CC_NUM_VEN_LST_HEADER
Search help WCB_SH_CC_NUM_VEN_LST_HEADER is consistent
 View must be deleted from the database and created again
Activate dependent view V_WCOCOH_CUS_LST
Check dependent search help WCB_SH_CC_NUM_CUS_LST_A
Search help WCB_SH_CC_NUM_CUS_LST_A is consistent
 View must be deleted from the database and created again
Activate dependent view V_WCOCOH_VEN_LST
Check dependent search help WCB_SH_CC_NUM_VEN_LST_A
Search help WCB_SH_CC_NUM_VEN_LST_A is consistent
 View must be deleted from the database and created again
Server Usage ************************************************************
Server.............. Workp Tasks Error .Timesum Objcount ms/Obj ..KCosts ms/KCs
ides_I01_00......... ....3 ....8 ..... .....171 ......34 .5.029 ......28 .6.107
 Parallel execution: 82 sec., Phase out time: 44 sec., Load: 6,9512195121951223E+01 percent
3T *** Activate objects at level 3
Parallel execution with maximal 3 concurrent tasks *
Total of 28 objects with 20.340 costs in 6 tasks
Activate dependent search help WCB_SH_CC_NUM_CUS_LST_A
Activate dependent search help WCB_SH_CC_NUM_CUS_LST_HEADER
Activate dependent search help WCB_SH_CC_NUM_VEN_LST_A
Activate dependent search help WCB_SH_CC_NUM_VEN_LST_HEADER
Activate table BAPITCSCALE
Table BAPITCSCALE was activated successfully
Activate table BAPITCSCALEO
Table BAPITCSCALEO was activated successfully
Activate dependent table KOMWBHIE
Activation of dependent table KOMWBHIE successful
Activate dependent table KOMWBHKE
Activation of dependent table KOMWBHKE successful
Activate dependent table KOMWBHKEX
 Append structure APPEND_KOMWBHKEX appended to table KOMWBHKEX
8R Enhancement category 2 possible, but include or subty. not yet classified
Activation of dependent table KOMWBHKEX successful
Activate table WB2_COND_CHANGE
Table WB2_COND_CHANGE was activated successfully
Activate table WB2_KEY_CHANGE
 8O INCLUDE table WB2_KOMG is not active
 8O Routine EXPAND (Table WB2_KEY_CHANGE could not be expanded)
Table WB2_KEY_CHANGE was not activated
Activate table WB2_KOMG_EXT
Table WB2_KOMG_EXT was activated successfully
Activate dependent table WBHID
Activation of dependent table WBHID successful
Activate dependent table type KOMWCOCOH_LI_TAB
Activate dependent table type KOMWCOCOH_STAB
3T Activation of table type WB2_BAPITCCONDITIONITEMO_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCCONDITIONITEMX_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCCONDITIONITEM_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCCONDITIONKEYO_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCCONDITIONKEYX_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCCONDITIONKEY_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Activation of table type WB2_KOMG_STAB
 8O Row type WB2_KOMG is not active or does not exist
Table type WB2_KOMG_STAB was not activated
Activate dependent table type WCB_DB_WCOCOA_JEST_STAB
Activate dependent table type WCB_DB_WCOCOA_STAB
Activate dependent table type WCB_DB_WCOCOH_I_ST_STAB
Activate view V_TWGTA
Activate dependent view V_TWGTA_CFM
Server Usage ************************************************************
Server.............. Workp Tasks Error .Timesum Objcount ms/Obj ..KCosts ms/KCs
ides_I01_00......... ....3 ....6 ..... ......45 ......28 .1.607 ......20 .2.250
 Parallel execution: 17 sec., Phase out time: 3 sec., Load: 8,8235294117647058E+01 percent
3T *** Activate objects at level 4
Too low cost (3.270) for parallel processing. Minimum: 6.000
Synchronous execution, no parallel processing *
3T Activate dependent table KOMWBHI
KOMWBHI-HKPSTP: Table KOMWBHK in search help attachment differs from table of search field
Activation of dependent table KOMWBHI successful
Activate dependent table type TABKOMWBHIE
3T Activation of table type WB2_BAPITCSCALEO_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_BAPITCSCALE_TAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
3T Activation of table type WB2_COND_CHANGE_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Activation of table type WB2_KEY_CHANGE_STAB
 8O Row type WB2_KEY_CHANGE is not active or does not exist
Table type WB2_KEY_CHANGE_STAB was not activated
3T Activation of table type WB2_KOMG_EXT_STAB
 Actions to be performed for dependent objects: activate, ABAP timestamp, DYNP timestamp
Synchronous processing: 19 sec., 7 objects, 3.270 costs
3T *** Activate objects at level 5
Too low cost (4.630) for parallel processing. Minimum: 6.000
Synchronous execution, no parallel processing *
3T Activate dependent table KOMWBHIH
KOMWBHIH-HKPSTP: Table KOMWBHK in search help attachment differs from table of search field
Activation of dependent table KOMWBHIH successful
3T Activate dependent table MCWBHI
MCWBHI-HKPSTP: Table KOMWBHK in search help attachment differs from table of search field
Activation of dependent table MCWBHI successful
Activate dependent table WB2_NASTLIEF
Activation of dependent table WB2_NASTLIEF successful
Activate dependent table type KOMWBHI_TAB
Activate dependent table type TABKOMWBHI
Activate dependent table type TRCON_KOMWBHI_TAB
Activate dependent table type WB2_KOMWBHI_STAB
Synchronous processing: 27 sec., 7 objects, 4.630 costs
3T *** Activate objects at level 6
Too low cost (2.160) for parallel processing. Minimum: 6.000
Synchronous execution, no parallel processing *
Activate dependent table TRCON_OUTP_DBDATA
Activation of dependent table TRCON_OUTP_DBDATA successful
Activate dependent table type GT_MCWBHI
Activate dependent table type KOMWBHIH_TAB
Activate dependent table type WB2_NASTLIEF_TAB
Synchronous processing: 2 sec., 4 objects, 2.160 costs
Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Final log
Following objects not activated/deleted or activated/deleted w. warning:
3T 8O Table WB2_KEY_CHANGE could not be activated
8O Table WB2_KOMG could not be activated
8O Table Type WB2_KEY_CHANGE_STAB could not be activated
(E- Row type WB2_KEY_CHANGE is not active or does not exist )
8O Table Type WB2_KOMG_STAB could not be activated
8R Table Type WB2_CHANGED_FIELDS_STAB was activated (error in the dependencies)
8R Table Type WB2_VAKE_TAB was activated (error in the dependencies)
8R Table APPEND_KOMWBHKEX was activated (warning for the dependent tables)
8R Table KOMWBHKEX_NEW was activated (warning for the dependent tables)
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on Activated and Deleted Objects
Number of objects to be activated............: 118
Objects not activated........................: 4
Activated objects with errors in dependencies: 2
Objects activated with warning...............: 2
Successfully activated objects...............: 110
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
Statistics on Activated and Deleted Objects
End phase 003 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
 Process..................: ides_9
Return code..............: 8
Phase 001..................: 00:03:05 (Object Activation)
Phase 002..................: < 1 sec. (Final log)
Phase 003..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:03:20
Date, time...............: 20.04.2007, 17:17:55
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20070420171755
 8O Ended with return code: ===> 8 <===
ALOG
ALL I01.ALL t 0000 20070419142033 DDIC ides
SAPKD70022 I01.ALL m 0000 20070419142040 SAPUSER DDIC ides
SAPKD70022 I01.ALL L 0004 20070419142051 SAPUSER DDIC ides 20070419142042
SAPKD70022 I01.ALL P 0004 20070419142056 SAPUSER DDIC ides 20070419142053
SAPKD70022 I01.ALL H 0004 20070419142615 SAPUSER DDIC ides 20070419142100
SAPKD70022 I01.ALL A 0004 20070419142914 SAPUSER DDIC ides 20070419142100
ALL I01.ALL S 0000 20070419142929 DDIC ides 20070419142100
ALL I01.ALL 6 0004 20070419142947 DDIC ides 20070419142100
SAPKD70022 I01.ALL I 0004 20070419143215 SAPUSER DDIC ides 20070419142100
ALL I01.ALL n 0000 20070419143340 DDIC ides 20070419142100
SAPKD70022 I01.ALL R 0000 20070419143413 SAPUSER DDIC ides 20070419142100
ALL I01.ALL t 0000 20070419145325 DDIC ides
SAPKD70023 I01.ALL m 0000 20070419145327 SAPUSER DDIC ides
SAPKD70023 I01.ALL L 0004 20070419145330 SAPUSER DDIC ides 20070419145328
SAPKD70023 I01.ALL P 0004 20070419145332 SAPUSER DDIC ides 20070419145331
SAPKD70023 I01.ALL H 0004 20070419145350 SAPUSER DDIC ides 20070419145332
SAPKD70023 I01.ALL A 0004 20070419145432 SAPUSER DDIC ides 20070419145332
ALL I01.ALL S 0000 20070419145439 DDIC ides 20070419145332
ALL I01.ALL 6 0000 20070419145443 DDIC ides 20070419145332
SAPKD70023 I01.ALL I 0004 20070419145527 SAPUSER DDIC ides 20070419145332
ALL I01.ALL n 0000 20070419145529 DDIC ides 20070419145332
SAPKD70023 I01.ALL R 0000 20070419145535 SAPUSER DDIC ides 20070419145332
ALL I01.ALL t 0000 20070419150805 DDIC ides
SAPKB70010 I01.ALL m 0000 20070419150826 SAPUSER DDIC ides
SAPKB70010 I01.ALL L 0004 20070419151011 SAPUSER DDIC ides 20070419150915
SAPKB70010 I01.ALL P 0004 20070419151101 SAPUSER DDIC ides 20070419151032
SAPKB70010 I01.ALL H 0004 20070419152544 SAPUSER DDIC ides 20070419152217
SAPKB70010 I01.ALL A 0004 20070419154149 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070419154232 DDIC ides 20070419154155
ALL I01.ALL N 0000 20070419154335 DDIC ides 20070419154155
ALL I01.ALL 6 0004 20070419154820 DDIC ides 20070419154155
SAPKB70010 I01.ALL I 0004 20070419163829 SAPUSER DDIC ides 20070419154155
ALL I01.ALL n 0000 20070419164133 DDIC ides 20070419154155
SAPKB70010 I01.ALL R 0000 20070419171913 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070419172644 DDIC ides
ALL I01.ALL t 0000 20070420101414 DDIC ides
ALL I01.ALL t 0000 20070420102627 DDIC ides
SAPKA70010 I01.ALL m 0000 20070420102638 SAPUSER DDIC ides
SAPKIPYJ7A I01.ALL m 0000 20070420102647 PIBASISUSER DDIC ides
SAPKW70010 I01.ALL m 0000 20070420102659 SAPUSER DDIC ides
SAPKNA7007 I01.ALL m 0000 20070420102705 SAPAPUSER DDIC ides
SAPKH60007 I01.ALL m 0000 20070420102728 SAPUSER DDIC ides
SAPK-60007INFICA I01.ALL m 0000 20070420102754 SAPUSER DDIC ides
SAPK-60007INFICAX I01.ALL m 0000 20070420102757 SAPUSER DDIC ides
SAPKA70010 I01.ALL L 0004 20070420102832 SAPUSER DDIC ides 20070420102800
SAPKIPYJ7A I01.ALL L 0004 20070420102838 PIBASISUSER DDIC ides 20070420102800
SAPKW70010 I01.ALL L 0004 20070420102906 SAPUSER DDIC ides 20070420102800
SAPKNA7007 I01.ALL L 0004 20070420102910 SAPAPUSER DDIC ides 20070420102800
SAPKH60007 I01.ALL L 0004 20070420102949 SAPUSER DDIC ides 20070420102800
SAPK-60007INFICA I01.ALL L 0004 20070420103005 SAPUSER DDIC ides 20070420102800
SAPK-60007INFICAX I01.ALL L 0004 20070420103007 SAPUSER DDIC ides 20070420102800
SAPKA70010 I01.ALL P 0004 20070420103039 SAPUSER DDIC ides 20070420103026
SAPKIPYJ7A I01.ALL P 0004 20070420103042 PIBASISUSER DDIC ides 20070420103026
SAPKW70010 I01.ALL P 0004 20070420103053 SAPUSER DDIC ides 20070420103026
SAPKNA7007 I01.ALL P 0004 20070420103055 SAPAPUSER DDIC ides 20070420103026
SAPKH60007 I01.ALL P 0004 20070420103121 SAPUSER DDIC ides 20070420103026
SAPK-60007INFICA I01.ALL P 0004 20070420103126 SAPUSER DDIC ides 20070420103026
SAPK-60007INFICAX I01.ALL P 0004 20070420103128 SAPUSER DDIC ides 20070420103026
SAPKA70010 I01.ALL H 0004 20070420104455 SAPUSER DDIC ides 20070420104317
SAPKIPYJ7A I01.ALL H 0004 20070420104510 PIBASISUSER DDIC ides 20070420104317
SAPKW70010 I01.ALL H 0004 20070420104614 SAPUSER DDIC ides 20070420104317
SAPKNA7007 I01.ALL H 0004 20070420104619 SAPAPUSER DDIC ides 20070420104317
SAPKH60007 I01.ALL H 0004 20070420105120 SAPUSER DDIC ides 20070420104317
SAPK-60007INFICA I01.ALL H 0004 20070420105217 SAPUSER DDIC ides 20070420104317
SAPK-60007INFICAX I01.ALL H 0004 20070420105228 SAPUSER DDIC ides 20070420104317
ALL I01.ALL t 0000 20070420110210 DDIC ides
SAPK-60007INFICA I01.ALL A 0004 20070420115140 SAPUSER DDIC ides
SAPK-60007INFICAX I01.ALL A 0004 20070420115140 SAPUSER DDIC ides
SAPKA70010 I01.ALL A 0004 20070420115140 SAPUSER DDIC ides
SAPKH60007 I01.ALL A 0004 20070420115140 SAPUSER DDIC ides
SAPKIPYJ7A I01.ALL A 0004 20070420115140 PIBASISUSER DDIC ides
SAPKNA7007 I01.ALL A 0004 20070420115140 SAPAPUSER DDIC ides
SAPKW70010 I01.ALL A 0004 20070420115140 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070420115355 DDIC ides 20070420115217
ALL I01.ALL N 0000 20070420115401 DDIC ides 20070420115217
ALL I01.ALL 6 0004 20070420120305 DDIC ides 20070420115217
SAPKA70010 I01.ALL I 0004 20070420121421 SAPUSER DDIC ides 20070420115217
SAPKIPYJ7A I01.ALL I 0004 20070420121612 PIBASISUSER DDIC ides 20070420115217
SAPKW70010 I01.ALL I 0004 20070420123219 SAPUSER DDIC ides 20070420115217
SAPKNA7007 I01.ALL I 0004 20070420123349 SAPAPUSER DDIC ides 20070420115217
SAPKH60007 I01.ALL I 0004 20070420130625 SAPUSER DDIC ides 20070420115217
SAPK-60007INFICA I01.ALL I 0004 20070420131144 SAPUSER DDIC ides 20070420115217
SAPK-60007INFICAX I01.ALL I 0004 20070420131253 SAPUSER DDIC ides 20070420115217
ALL I01.ALL n 0000 20070420131356 DDIC ides 20070420115217
SAPKA70010 I01.ALL R 0000 20070420132346 SAPUSER DDIC ides
SAPKIPYJ7A I01.ALL R 0000 20070420132353 PIBASISUSER DDIC ides
SAPKW70010 I01.ALL R 0000 20070420134358 SAPUSER DDIC ides
SAPKNA7007 I01.ALL R 0000 20070420134934 SAPAPUSER DDIC ides
SAPKH60007 I01.ALL R 0006 20070420140042 SAPUSER DDIC ides
SAPK-60007INFICA I01.ALL R 0000 20070420140703 SAPUSER DDIC ides
SAPK-60007INFICAX I01.ALL R 0000 20070420140713 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420141932 DDIC ides
ALL I01.ALL t 0000 20070420141939 DDIC ides
ALL I01.ALL t 0000 20070420142045 DDIC ides
ALL I01.ALL t 0000 20070420142823 DDIC ides
SAPKGPID07 I01.ALL m 0000 20070420142825 SAPUSER DDIC ides
SAPKGPID07 I01.ALL L 0004 20070420142836 SAPUSER DDIC ides 20070420142828
SAPKGPID07 I01.ALL P 0004 20070420142839 SAPUSER DDIC ides 20070420142837
ALL I01.ALL 6 0000 20070420143317 DDIC ides 20070420143303
SAPKGPID07 I01.ALL I 0004 20070420143348 SAPUSER DDIC ides 20070420143303
ALL I01.ALL t 0000 20070420143614 DDIC ides
SAPKW70011 I01.ALL m 0000 20070420143625 SAPUSER DDIC ides
SAPKW70011 I01.ALL L 0004 20070420143742 SAPUSER DDIC ides 20070420143632
SAPKW70011 I01.ALL P 0004 20070420143811 SAPUSER DDIC ides 20070420143749
SAPKW70011 I01.ALL H 0004 20070420144247 SAPUSER DDIC ides 20070420144134
SAPKW70011 I01.ALL A 0004 20070420144612 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070420144641 DDIC ides 20070420144617
ALL I01.ALL 6 0004 20070420144903 DDIC ides 20070420144617
SAPKW70011 I01.ALL I 0004 20070420150622 SAPUSER DDIC ides 20070420144617
ALL I01.ALL n 0000 20070420150652 DDIC ides 20070420144617
SAPKW70011 I01.ALL R 0000 20070420151931 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420153322 DDIC ides
SAPKGPDD07 I01.ALL m 0000 20070420153324 SAPUSER DDIC ides
SAPKGPDD07 I01.ALL L 0004 20070420153338 SAPUSER DDIC ides 20070420153326
SAPKGPDD07 I01.ALL P 0004 20070420153345 SAPUSER DDIC ides 20070420153340
SAPKGPDD07 I01.ALL H 0004 20070420153632 SAPUSER DDIC ides 20070420153610
SAPKGPDD07 I01.ALL A 0004 20070420153818 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070420153831 DDIC ides 20070420153823
ALL I01.ALL 6 0000 20070420153905 DDIC ides 20070420153823
SAPKGPDD07 I01.ALL I 0004 20070420154205 SAPUSER DDIC ides 20070420153823
SAPKGPDD07 I01.ALL R 0000 20070420154226 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420154751 DDIC ides
SAPKGPAD07 I01.ALL m 0000 20070420154807 SAPUSER DDIC ides
SAPKGPAD07 I01.ALL L 0004 20070420154851 SAPUSER DDIC ides 20070420154814
SAPKGPAD07 I01.ALL P 0004 20070420154911 SAPUSER DDIC ides 20070420154856
SAPKGPAD07 I01.ALL H 0004 20070420155533 SAPUSER DDIC ides 20070420155317
ALL I01.ALL t 0000 20070420155918 DDIC ides
SAPKGPAD07 I01.ALL A 0004 20070420160620 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070420160638 DDIC ides 20070420160625
ALL I01.ALL 6 0004 20070420160743 DDIC ides 20070420160625
SAPKGPAD07 I01.ALL I 0004 20070420162359 SAPUSER DDIC ides 20070420160625
ALL I01.ALL n 0000 20070420162445 DDIC ides 20070420160625
SAPKGPAD07 I01.ALL R 0004 20070420163533 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420163915 DDIC ides
ALL I01.ALL t 0000 20070420164004 DDIC ides
ALL I01.ALL t 0000 20070420164112 DDIC ides
SAPKGPFD07 I01.ALL m 0000 20070420164119 SAPUSER DDIC ides
SAPKGPFD07 I01.ALL L 0004 20070420164205 SAPUSER DDIC ides 20070420164129
SAPKGPFD07 I01.ALL P 0004 20070420164217 SAPUSER DDIC ides 20070420164209
SAPKGPFD07 I01.ALL H 0004 20070420164645 SAPUSER DDIC ides 20070420164524
SAPKGPFD07 I01.ALL A 0004 20070420165233 SAPUSER DDIC ides
ALL I01.ALL S 0000 20070420165248 DDIC ides 20070420165238
ALL I01.ALL 6 0000 20070420165322 DDIC ides 20070420165238
SAPKGPFD07 I01.ALL I 0004 20070420170133 SAPUSER DDIC ides 20070420165238
ALL I01.ALL n 0000 20070420170156 DDIC ides 20070420165238
SAPKGPFD07 I01.ALL R 0000 20070420170418 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420170650 DDIC ides
ALL I01.ALL t 0000 20070420171054 DDIC ides
SAPKGPGD07 I01.ALL m 0000 20070420171056 SAPUSER DDIC ides
SAPKGPGD07 I01.ALL L 0004 20070420171108 SAPUSER DDIC ides 20070420171059
SAPKGPGD07 I01.ALL P 0004 20070420171112 SAPUSER DDIC ides 20070420171109
SAPKGPGD07 I01.ALL H 0004 20070420171431 SAPUSER DDIC ides 20070420171339
SAPKGPGD07 I01.ALL A 0008 20070420171755 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420171911 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420171918 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420172106 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420172117 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420173251 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420173255 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420173753 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420173756 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420173914 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420173917 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420174114 DDIC ides
ALL I01.ALL t 0000 20070420174541 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420174543 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420181327 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420181355 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420183111 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420183123 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420183655 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420183700 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420185422 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420185424 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420185611 TMSADM ides
ALL I01.ALL S 0000 20070420190348 DDIC ides 20070420190338
ALL I01.ALL t 0000 20070420190358 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420190403 SAPUSER DDIC ides
ALL I01.ALL 6 0000 20070420190407 DDIC ides 20070420190338
ALL I01.ALL a 0000 20070420190537 DDIC ides
ALL I01.ALL t 0000 20070420190559 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420190606 SAPUSER DDIC ides
ALL I01.ALL d 0000 20070420190622 DDIC ides
SAPKGPGD07 I01:000 I 0004 20070420190713 SAPUSER DDIC ides 20070420190338
ALL I01.ALL t 0000 20070420190713 DDIC ides
ALL I01.ALL Q 0000 20070420190717 DDIC ides 20070420190338
SAPKGPGD07 I01.ALL A 0008 20070420190925 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420191154 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420191156 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420202424 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420202534 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420204507 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420204509 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420211533 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420211555 SAPUSER DDIC ides
ALL I01.ALL t 0000 20070420220457 DDIC ides
SAPKGPGD07 I01.ALL A 0008 20070420220500 SAPUSER DDIC ides
SLOG
START CMDIMPORT I01 L 20070419142043 DDIC ides 20070419142042
STOP CMDIMPORT I01 L 20070419142052 DDIC ides 20070419142042
START imp all I01 20070419142100 DDIC ides 20070419142100
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT I01 H 20070419142101 DDIC ides 20070419142100
STOP DD IMPORT I01 H 20070419142617 DDIC ides 20070419142100
START DD ACTIVATION I01 A 20070419142618 DDIC ides 20070419142100
START tp_getprots I01 J 20070419142620 DDIC ides 20070419142100
STOP tp_getprots I01 J 20070419142918 DDIC ides 20070419142100
STOP DD ACTIVATION I01 A 20070419142918 DDIC ides 20070419142100
START DISTRIBUTION OF DD-O I01 S 20070419142918 DDIC ides 20070419142100
START tp_getprots I01 S 20070419142918 DDIC ides 20070419142100
STOP tp_getprots I01 S 20070419142933 DDIC ides 20070419142100
STOP DISTRIBUTION OF DD-O I01 S 20070419142933 DDIC ides 20070419142100
INFO TBATG CONVERSION OF I01 N not needed DDIC ides 20070419142100
START MOVE NAMETABS I01 6 20070419142934 DDIC ides 20070419142100
START tp_getprots I01 P 20070419142934 DDIC ides 20070419142100
STOP tp_getprots I01 P 20070419142949 DDIC ides 20070419142100
STOP MOVE NAMETABS I01 6 20070419142949 DDIC ides 20070419142100
START MAIN IMPORT I01 I 20070419142949 DDIC ides 20070419142100
STOP MAIN IMPORT I01 I 20070419143215 DDIC ides 20070419142100
START TBATG CREATION OF EN I01 n 20070419143216 DDIC ides 20070419142100
START tp_getprots I01 Y 20070419143216 DDIC ides 20070419142100
STOP tp_getprots I01 Y 200How was this problem fixed? We are running into the same problem. Any help will be much appreciated.
Thanks so much.
Mario -
App-V 5 SP2 ODT Office 2013 32bit Package Import error
I have used ODT to package Office 2013/Project/Visio. The package is created without any errors. When I go to import the package using App-V Management Console i get the below error.
"There were problems interacting with the database on the server. The error was: String or binary data would be truncated.
The statement has been terminated."
There are no further errors and the import fails.
I have successfully imported the 64bit version using the exact same steps without issue. Can someone please advise?Thanks for the escalation Brandon. Yes i have created the 32bit version without the Languages, and this has worked. so it looks as if there is a String that is being created which may exceed the limits of the Database.
I was able to open the Appv file in Sequencer and just change the name using that. I am now able to publish the App. I still find it strange that ODT allows the file to be created with such a long string and then throw an error. -
OWB package import error. PRS-00318. In need of urgent help
Hello everyone,
I am having a weird error when i try to import a package in owb. Saying "PRS-00318: SQL Error encountered while updating CMPALLFOLDERFCO for key ********************************* Please contact Oracle Support with the stack trace and details on how to reproduce it. " ( neglect the ** i didnt want to write that bit )
This started to happen a couple of days ago. When i try to import a package or re-import them it seems like the procedures in the packages all seems like they are requiring a parameter ( i understand it in the import window, the paranthesis after the procedure name like procudre_name( ) ) But actually there is not a parameter required for the procedure to work. It is not declared at all. When i hit the import button it gives me the error below.
Metadata Import Result Report
Date: Jan 31, 2011 7:41:38 AM
Installed Module Information:
Physical Name: ........... ****************
Logical Name: ............ ****************
Application Type: ........ Oracle Warehouse Application
System Type: ............. Oracle Database 8i/9i/10g
Database Link: ........... owb_8467
Dictionary Type: ......... DATABASE_DICTIONARY
Schema/Application System: null
The following actions have been applied:
+ View
+ Transformation
+ MS_********************* : Created with Second Class Object Failure
+ Package Spec ................. : Created
+ Package Body ................. : Created
+ EX_*******************() .. : PRS-00318: SQL Error encountered while updating CMPALLFOLDERFCO for key ******************************Please contact Oracle Support with the stack trace and details on how to reproduce it. ??
Well i have no idea what is going on. Even the existing packages ( that are imported long before this error ocurred ) are showing the procedures with parameters.
Anyone having any idea how to solve this problem ?
Your help would be appreciated.finally sorted it out! it had something to do with the ArrayCollection in the mx.collections not being linked to the AS hence the error. so heres what i did:
import mx.collections.ArrayCollection;
import flash.net.registerClassAlias;
registerClassAlias("flex.messaging.io.ArrayCollection", ArrayCollection);
i imported the ArrayCollection class and the registerClassAlias class into the AS i was using and then registered the alias then voila! error gone! -
Transport Request import Error
Hello Experts,
When I import transport request SAP system from another SAP system then getting error as "Result of cross-total check indicates a damaged data file (9114)" with the return code 16. Please suggest any one what is problem and how to resolve it?
Thanks.Hi,
You can generate a transport os copies for the sae request an release it to get a proper datafie and cofile.
Regards,
Nirmal.K -
GP CO implemention package imports error
Hi Frndz..
Am just implemanting the GP CO , so in the impemantion of Interface controller when am adding the below imports itz giving error how i can resolve this
import com.sap.caf.eu.gp.co.api.GPCallableObjectFactory;
import com.sap.caf.eu.gp.co.api.GPWebDynproResourceAccessor;
import com.sap.caf.eu.gp.co.api.IGPCOResultStateInfo;
And also by default in thid Interface Controller impelmantion am getting an error like
"This compilation unit indiresctly refernces the missing type com.sap.caf.eu.gp.co.api.IGPTechnicalDescription(typically some required class file is referncing out side the classpath)"
Am uysing NWDS 7.0.09 and java is JDK1.5.0_01
I
If any ideas plz share with me..
Thanks in Advance
Regards
RajeshResolved, errors due to the NWDS
-
BHOLD Import Error/Warning: Exported-Change-Not-Reimported for OUs
Hi,
I have a bhold setup where there are list of 600 OUs.
Have provisioned all the OUs into BHOLD Core and the parent attribute is set in as the objectidentifier of the parents.
This is achieved using FINDMVutils.
But when i am exporting only 540 OUs are correctly placed under their parents but there are list of 60 OUs which are not placed correctly under their parent OU instead they are place under ROOT ou as their parent OU.
The error when importing after export reads "export change not reimported".
I have checked for issues but still not able to get any help.Can anybody guide me what is the problem.
i have referred the link https://social.technet.microsoft.com/Forums/en-US/484a701c-7a40-4492-9b0d-f4da4fc17bd2/bhold-import-errorwarning-exportedchangenotreimported?forum=ilm2 but cant understand the reply.
shaktiCan you enable tracing on the bhold MA and see if that gives you any ideas?
http://blog.goverco.com/2013/11/can-you-trace-bhold-access-management.html -
Portal Run time error when created a seperate role for Transport package.
Hi Experts,
I have created a seperate role for Transport Package(import/export iviews).
Normally we have transport package functionality in system admin.
Below steps i followed for creating the new role(trans admin)
1.Copied SAP provided system admin role to a seperate folder.
2.Deleted reamining portal objects(like UWL, portal display etc ..) except transport packege workset.
3.Renamed the role to trans admin.
I have assigned that role to my self, it is working fine to me when i clcik on export and import.I have super admin role.
when i assign this role to some portal users, Export is not working.
when user clicks on Export role they are getting below error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/medium_safety/com.sap.portal.appdesigner.contentcatalog/components/Framework).
Exception id: 12:10_31/08/09_0031_21763550
See the details for the exception ID in the log file
By looking into exception iD also, same error access denied it is showing.
Please Advice.
Thanks
Sony.Hi Raghu,
Thanks for the reply.
I have given full permissions to all users to this trans admin role before itself.
Thanks in advance.
Sony.
Edited by: ambica sony on Aug 31, 2009 1:53 PM -
Revert Portal transport package .epa file and .sca file
Hi,
Recently we have imported one transport package .epa file (through transport package import editor) and imported one .sca file (though SDM) in Portal Quality system.
Now we want to revert both the transport package .epa file and .sca file in Portal Quality system.
Can anyone tell us the procedure?
Thanks
PhaniHi Phani,
You can find the previous version of SDA/SCA's in the following path
Go to SDM -- Deploy tab-- there is little black arrow pointing up in the bottom right corner. Click on it to expand the menu and one of the options will be "Deploy SDAs/SCAs that have any version.
Please refer this link for more information
To undeploy .sca
Hope this helps you...
Regards,
Saleem Mohammad. -
Error while importing Transport Package ?
Hi,
I have created a Transport Package which includes the following things :
1. Two folders
2. Two iViews
3. one .par file
I am trying to Import the above package by choosing the option 'Source for package file - client' and then browsing where my .epa file is placed.
When i click the Upload Button I am getting the following error -
'Error extracting the package file. Check the log file for details'
What can be reason for this error?
Regards,
Vikas KhandpurHi Vikas
It is not generally advised to Package a .PAR file into a .EPA file. Because a .PAR file may depend on parts that are not included in the .EPA file which might cause incosistent transports.
You can directly upload a .PAR file into the Portal. Just go to System Administration -> Support -> Portal Runtime -> Administration Console and upolad the .PAR file.
Try removing the .PAR file from the Transport Package and download the exported .EPA file. Import this new file and see if it works this time.
Hope that helped
Best Regards
Priya -
Export/Import Transport package error.
Hi,
I created a transport package as follows:
System admin>transport>export>(in a folder)>new transport package.
added the content(a folder) PCD.
in properties: References Filter:*
Exported it and saved on my local machine. (as .zip file)
When im trying to import the same in another instance, im getting an error as:
"Could not upload file. Check the log files for details."
I checked in the log file and it says:
"java.io.IOException: Bad ZIP file format: D:\usr\sap\DEV\tmp\_htmlb13135711805411293310975743163865.tmp; does not contain a package file. "
Please help me to understand where the error is!.
Any help would be appreciated..!!.
Thanks,
Shikha.
Edited by: thakur_shikha on Aug 17, 2011 11:17 AMHI,
I think that Package file donu2019t have any Portal Content. We have to Export the portal Content .epa file structure and import that .epa into another portal Server. Donu2019t Save .zip file
Please follow these Steps
How to Export Package from Portal Component
1.Go to System Administrator-Transport-Transport Package-Click on ExportPortal ContentGo to our Folder (SapExample)-RC-NEW-Click on Transport Package
Here create one Transport Package.
Transport Package Name: Pack1
Transport Package ID: PackID1
Next--FINISH-Select Open object for editing---- OK
iView/Page/Work Set/Role/Folder/-RCClick on Add Object to Transport Package-Click on Export button
Here Change File Name: Pack1.epa-----Click on Start Export Button.
Now you will see that Pack1.epa file created or not
Go this Path D:\usr\sap\System ID\Instance Name\global\pcd\Export
Here Pack1.epa File Available.
Or you can download from portal also. When you are export that .epa file click on Start Export Button after one download link available. So we can download here also.
How to Import to Portal Component
2. Go to System Administrator--Transport Package--Click on IMPORT
Select Source for Package Files: Client
Browse the Pack1.epa file--And click on Upload--Click on Import button.
Please Look at this wiki:[Export/Import|http://wiki.sdn.sap.com/wiki/display/EP/TransportingPortalContent]
Hope this helps!!
Regards
Vijay
Edited by: VijaySAPEP on Aug 17, 2011 3:13 PM
Edited by: VijaySAPEP on Aug 17, 2011 3:14 PM -
Problem in Importing Transport Package in Quality
Dear All,
I had created an Transport Package on Development Server of EP.
That transport package has got three ivews and one work set and two role.
I downloaded that Transport package ".epa" file on my local machine.
I tried to Import that ".epa" file in Quality Server of Ep i am getting an error "Could not upload file. Check the log files for details."
I need to know how to resolve this problem.
Please help fast.
Regards,
Swapnil IndulkarHi swapnil,
Whats the error you are getting in Log file.
once check it provide the details here. and at the time of Exporting in EP Development is it given the sucess message with '0' errors?
Check the log file in <host:portno/nwa-> Monitoring --> logs and traces
Regards
Mahesh -
Portal content Transport Packages Export/Import Question.
Hi,everyone:
I have a problem when Export packages of portal content,the epa-file is correct on the server however become error after download from the server to localhost.
The bug is Function of Download itself,if anyone have meet this case and help me. I need your help!
Regard!
FishHi Ree,
As I mentioned in my previous reply it is working perfectly for me. The import is creating the required files in the PCD.
Let me explain how it is done.
Create a TP
Create a folder and add the required files(Workset,pages, iviews etc) to the the folder.
add the folder with all the contents(select 'Add all objects to transport package' from the content menu) to the TP.
Export the TP. give a name of your choice(removing the numbers)
Download it to the local machine using the dowmload link.
the file will be saved as a <i>TPName</i>.epa in your local drive.
in import, select 'client' for Source for Package Files.
brose and select the <i>TPName</i>.epa file.
upload the file, and you can see the contents.
then import it to the new environment. Now the complete folder stucture will be created in the PCD exactly as you created it for the TP.
I hope you are doing like this. It should work
Are yo able to open the downloaded file with WinZip?
cheers
Kiran -
Problem importing Transport package.
Hello,
I am importing WPC web content (Transport package) (http://help.sap.com/saphelp_nw70/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm ). Transport Package doesn't show up in pending imports after Package upload. I repeated the package upload. Still its not showing under "Pending Imports"
Anything else has to be done while importing a transport package (wpc web content).
Thanks
TonyI never had to enter object ID, when I was exporting. The only required property was the name of the package. I was following this document to export WPC Web Content http://help.sap.com/saphelp_nw70/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
When I exported, the file had a random name d03d399d-c6f6-2b10-12b1-c1a02f8f42c5.zip
Here is the summary of the logfile:
Export "<name>Content" (d03d399d-c6f6-2b10-12b1-c1a02f8f42c5) finished with 0 errors after 0 minute(s) 5 second(s)
Mar 19, 2009 10:20:14 AM Info Statistics: 180 items (43 folders, 85 files, 52 links), 7941246 bytes in total
Mar 19, 2009 10:20:14 AM Info ******************************************************************************
Mar 19, 2009 10:20:14 AM Info Generating archive for export "<name> Content" (d03d399d-c6f6-2b10-12b1-c1a02f8f42c5)
Mar 19, 2009 10:20:15 AM Info Archive with 1 parts generated for export "<name> Content" (d03d399d-c6f6-2b10-12b1-c1a02f8f42c5) after 0 minute(s) 1 second(s)
Should I change the name of the file to "com.<name>..." ?
Maybe you are looking for
-
HT1473 Podcast Error Message "The network connection could not be made."
Any Help. Just switched my ipod to a new windows 8 computer. ipod was recognized. Thanks
-
Oracle ODBC and DAO extremely slow
Hi I'm using Microsoft DAO 3.6 with an Oracle ODBC connection (version 9.2) in an VB6 application. Opening an updateable dynaset is extremely slow, I have measured the performance with Oracle ODBC, Microsoft Oracle ODBC and Microsoft SQL-Server ODBC
-
Probeli con l'attivazione del pannello pulsanti e moduli
perché in Indesign cc 2014 il pannello dei pulsanti e dei moduli non si attiva?
-
hi greetings. sahall anybody explain step by step of installing the business content. thanks regards sridhar [email protected]
-
Connected Ethernet but no internet (Lion 10.7.1)
My MBP worked well with Lion. But after updating to 10.7.1 some days, I couldn't access internet via cable anymore (Wi-fi is ok). I have checked cable, router, modem,... but all were ok. Looking for info from this communities and trying most options