Transport Request for Analysis Authorization

Hello Everyone,
When a trasport request is created for any BI analysis authorization ( including the Z*), the type of trasport request created
is workbench request. What is the reason behind this because when any Customised Role / Profile is included in transport request this will be customised request unlike analysis authorization.
Thanks in advance.....

Hi Rashmi,
The difference is In BI, the AA authorizations are independent. Any objects that are independent of the client will be captured in the workbench type of transport request, when they are required in the other client. Hence you can see the Workbech type request for transporting changed Repository objects and changed system settings from cross-client tables. However, customizing requests involve changes recorded to client-specific Customizing objects .
The Analysis authorizations are always captured in a Workbench type of transport request by default due to the above design.
You can still transport both the PFCG role, and AA in a single transport request, you can do the same by following the steps mentioned in the below Wiki:
https://wiki.sdn.sap.com/wiki/display/BI/HowtotranportroleandAAtogetherinBI
Regards,
Raghu

Similar Messages

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

How to Delete Transport request for Delete client

Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan

You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...

Transport request for BW queries and roles.

Hi All,
we need to craete 20 bw queries on 4 multiproviders. We need to save 18 queries as workbooks in one role and the other 2 queries in other role. Both the roles and queries does not exist and will be created in Developement environment.
We just want to know how we can transport them in the quality environment. What is the right method to transport them.
Can we transport all the object queries, workbooks and roles in number of transport requests so that if few queries or workbooks needs any changes then we do not have to transport all objects just the request which includes the changed objects.
Thanks & Kind Regards,
Hardeep

Thanks a lot for all of you for your quick response. But i still have questions.
If we create one transport for roles and one transport for each query then we will be having 21 transport requests. But the transport request on same multiprovider can lock the clacuated key figures and restricted key figures, if they are present in more than one query, it means they will be present in more than one transport requests, so they can be locked and trasport request will be failed.
If i just create one transport request for all the objects roles, quaries & workbooks it will not loack any object, and transport request will not fail. But i have to transport all the objects again if i need to change one of the queries.
Please let me know if there is a method that i can divide my queries as per multiprovider and can create transport requests as per multiprovider so that we can not lock calculated keyfigures and restricted key figures. Is workbooks can be published in the role in the same transport request. If it is and if in more than one transport request we are publishing the different workbooks to the same role, will it lock the role.

2 Transport Request for a report

Hi Experts,
I am having 2 Transport requests for the same Z report (classical report).
I have transported both of them to quality on after another with different modifications in both of them.
Now i want to transport it to Production.
I want to know do i need to transport both the requests or do i need to transport only the last
Transport request to production ?
Please help <removed by moderator>.
Edited by: Thomas Zloch on Jun 16, 2011 10:33 AM

Hi,
As per SAP Best practice there shouldnt be any floating TRs in Quality system which are not moved to Production. Which means all the transports which move from Dev to Quality should be moved to Production. If there is any unwanted change which is moved due to a TR, then a correction request should be created & released to subsequent systems.
Hence in your case move both the TRs in the same sequence to Production.
Thanks,
Best regards,
Prashant

How to create transport request for standard web template

hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shalini

Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome

How to create transport request for standard text created using SO10.

Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna L

Hi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva

How to assign transport request for Dynamic selection in SE36

Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PM

Moderator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM

No request has been set up as the standard transport request for BEx object

Hi gurus,
I have this error in a query . Have someone any ideea what is this?
Thanks,
Ramona

Hi,
Before you create a query you have to assign a global request to Bex application.
To do this goto Transport connection of RSA1, In the tool bar you will see a icon Bex (Create transport request for Bex). Assign a request for it. After doin so, you error will be resolved.
-- Selva

How do I AUTOMATICALLY generate Transport request for a Z table data?

Hello friends,
I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
Any ideas?
Your help is greatly appreciated.

You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
Also change the "delivery class' in the table attributes to 'C' - Customizing table

Transport request for the deleted dso

Hi,
i had deleted the dso in development and not captured the transport request. now how can i generate the transport request for the deleted dso to move for production.
Regards
Ram
Edited by: ramsapconsultant on Mar 9, 2011 7:40 AM

Hi Ram,
you can try creating DSO with same name in Dev system. Capture it in transport req.
Now delete that DSO and capture it in deletion Transport Request.
I am not 100% sure if this will work but you can give it a try.
Regards,
Hardik

Transport Request for Scripts

Hi Gurus,
How can I know the Transport Request for my Script form , other than SE09 and SE10.
Thanks in Advance.
Thanks and Regards
Siri......

In Se16 tcode: take table:E071
give the following values and execute.
PGMID                            R3TR
OBJECT                          FORM
OBJ_NAME                   "ur sapscript form name
you will get the transport request related to this form.

Creating transport request for SQVI

Hi ABAP Guru's,
I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
Thanks.
Regards,
Tushar.

Hi Tushar,
You cannot transport The query made via SQVI is only intended for individual use/reporting purpose.
To transport the query by converting it to SAP Query source of data tobe converted to an Infoset.
SQVI-> SAP QUERY
QUERY(MENU) -> CONVERT QUICKVIEWS
Assign Infoset and Area to the Query and then you can transport.
Hope this may help you.
Regards,
Lanka

Old transport request for sap script (form)

Hi,
I want to find the old transport request for the sapscript(form). Just now it has been over written by the latest CTR. So i need to transport the old one.
How to find out the old transport request.
Thanks,

Try giving the script name in OBJ_NAME field in table E071 and then execute and it will give you a list of all transports. You can sort it in descending and see the order of transports.
Thanks,
Srinivas

Transport request for function group

Hi All,
I have developed a function module in a function group say 'zdeep'. I have moved the transport request for newly developed function module to production. But there Iam unable to run the function module.
Should we transport the function group also to production?
If so, how can we get the transport request number for the function group?
I have tried in se80. but there iam not able to track the request no for the function group.
please help me
regards
Murali Krishna .T

yes i think if u r doing any chnages in func group then it also has to be moved to Reflect chnages..also some proper order is to be maintained while moving TR
http://wiki.sdn.sap.com/wiki/display/Snippets/Atoolrelatedtotrackingoftransport+request
check this link
Edited by: npathak on Aug 14, 2010 8:47 AM

Transport Request for Analysis Authorization

Similar Messages

Maybe you are looking for