Transport request prompt details

Whenever there is a modification to existing reports or new reports being created, SAP prompts for a request number to be captured. Apart from capturing the request number, I want to capture other details like technical person name, functional person name, plant, transaction code, etc. as such details will be very useful in drafting the charts like how many modifications / new reports made per plant, how many modifications / new reports done by a technical person, etc.
Is there any userexit that is called when transport request pop-up screen comes up ? Any other ideas ?
Please clarify.
Regards,
Tom Jerry.

For the transport details, please check the tables E070 and E071.
Just pass the <Program name >in the field E071-OBJ_NAME and get all the transport order details.
and also check the table TRDIR for all reports and pass the TRDIR-UNAME is username where you can get the Reports done by the person.
TRDIR for all reports and pass the TRDIR-CNAME is username where you can get the Reports changed  by the person.
TFDIR where all the function module are stored
DD03l where all tables are stored.
Prabhudas

Similar Messages

  • Transport request prompted when insert new entries for ADCOMP via SM30?

    When I insert new entries for table ADCOMP via SM30, the system prompts me for a transport request number when I save the entries.  It never asks me the transport no. for any other tables via SM30 edit.  Is it something specific to table ADCOMP?
    The Table Maintenace Generator is delived by SAP with Authorization group assign to VC (SD User Control), will this cause the issue I have here?
    The user is responsible for updating the entries in Production, I had created a Z tcode to run SM30 on this table, at the end, it stills ask for a transport request no. 
    Can someone help me out on this?
    Thanks for your help in advance.

    I had searched OSS notes before I posted my question here.  Note# 726769 mentioned the maintenance view on ADCOMP.  As I mentioned in my last reply, I am NOT going to change anything on ADCOMP, I just create a custom view ZV_ADCOMP on top of it and change the attributes on the custom view.  
    I tried and it seems working.  I can enter data via SM30 on ZV_ADCOMP, it allows me to save the data without a transport request. 
    I think my problem has been solved.  Thanks for Rob and Suhas 's reply.  Points has been rewarded for both.

  • No Transport request Prompt??

    Hello All,
                   Just for the training purpose I need to define a logical system in our dev environment.But it is prompting me a workbench request even if I cahnge the client settings in SCC4 by selecting changes without automatic recording,no transports allowed.I do not want any prompt of transport request while defining logical system.How is it Possible??

    click on the big button that sais "Own Request" then just create a new local request.
    Regards
    Juan

  • Is there a way to see the details of transport request files

    hello friends
    for some reason when I try to create a package with objects like function group and function modules, I am not able to import the function modules on the other server.
    So i would like to see if the transport request files that I have created (K900226.EC1 and R900226.EC1) has these modules included in them.
    Is there a way that I can see what objects are included in the released transport request files.
    Your help will be greatly appreciated.
    Thanks
    Ram

    Hi Ram,
    You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
    The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

  • Can give me the details how to release the transport request to the qa

    can give me the details how to release the transport request to the quality server pr production server
    thanks

    Hi,
    Use transaction SE09. Here select "modifiable" .Then click -Display.
    Now you get a list of all requests which can be released.
    Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
    Muraleedharan.R
    091 9880028904

  • Prompt for transport request if records are added/modified for custom table

    Hello Experts,
    A couple of questions,
    1. How do we prompt user to create a TR whenever he changes a record in my custom table
    via SM30? my custom table has a maintenance type of 'C' - customizing already.
    2. How do we transport the custom table contents to another client?
    Thank you guys and take care!

    Hello
    Regarding (1) just have a look at a standard maintenance view like V_T001W (SE11 -> menu Utilities -> Table Maintenance Generator ):
    Here you can see that the option Standard Recording Routine is chosen which is responsible for prompting for a transport request as soon as records of the table/view are changed.
    Regards
      Uwe

  • Database tables holding details for a non - released transport request

    Dear All,
    We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
    SAP kernel release 7.00, kernel patch number 173
    Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
    The problem is the following :
    We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB  command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans  directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
    We are now facing the following conflict :
    One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
    ( This was done during the day of the data corruption)
    When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
    'Request lock on non u2013 existent task / request DEVK921426'
    No details for the transport request DEVK921426 exist in either of the two directories :
    /usr/sap/trans/data   , /usr/sap/trans/cofiles
    The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
    Any clues would be highly appreciated.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Dear Volker,
    Thank you very much for your interest.
    The transport request of interest did not appear in transaction code SE03
    Eliminating the record from table TLOCK indeed did solve the problem.
    Thank you again.
    Best regards.
    Reda Khalifa

  • SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

    Hi Experts,
    Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
    I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
    Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
    1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
    2) If not, Why system did not prompted me for a transport?
    3) Then How Can I attach my CDM/changes to a transport?
    Thank you

    I don't think we get a TR prompt when adding a view in BD64.
    You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

  • No prompt for transport request

    Hi
    After our upgrade of development we have a problem that the system no longer is prompting for a transport request when you do something like create or change.
    We can go in to transport connection and make our own but obviously this is a bit of a pain.
    Has anyone else experienced this???
    The Dev system is open and set to automatic recording of changes in se06
    Andy

    Standard SAP programs should be default available in all landscapes(DEV,QA,PROD) you dont want to transport.
    However;if you find those program lines do not match across landscapes then some OSS notes,SP could have overwritten ,make sure they are applied across all landscapes in these event.
    If at all you find discrepancies ,can create a request so that you can transport it.
    goto SE80>Programs>select ur program-->object directory enty from main menu change the owner from SAP to personlized..
    Aforementioned steps would be last of my steps..
    Hope it Helps
    Chetan
    @CP..

  • Required tables which touch Transport Request details

    Could any one tell me which table we can get the following information
    1)Transport Request released by
    2)Transport Request Creation Date
    3)Transport Request released date
    4)Import to the  systems
    5)Imported to the systems on which dates
    I checked E070 and E071 and i did not found this details

    Hi,
    I think, you can find required information in below tables.
    E000
    E070
    E070A
    E070C
    E070CREATE
    E070DEP
    E070L
    E070M
    E070TAG
    E070TC
    E070USE
    E071
    E071C
    E071E
    E071K
    E071KF
    E071KFINI
    E071S
    E07T
    Regards,
    sai

  • Transport Request Details

    Hi,
    I want to know if there is any report or function module that would let us see if all the objects in a transport request are assigned to which package?
    Thanks in advance.

    Hi Kalyan,
    Thanks for your response. I have found the solution. I actually wanted all the objects in a transport request to be assigned to a package ZBW.
    The solution is, go to SE09 and give your request number, then do the following from the Menu Bar:
    Request Task->Object List->Object Directory Entries. This would show all the objects in the request and their packages.
    Thanks

  • Transport Request details in SAP

    Hello all,
    When a transport request is saved, all objects in it might or might not be included in the object list attached to it.
    Now the components in the object list are retrieved from E070, but I am not able to find the source for compnonents that are not a part of the object list of a TR.
    Can someone please let me know some table or API for the same?
    Thanks a ton!!
    Regards
    Priyanka

    Hello Krishna,
    I am already using the following query, but no use. Also I have checked directly in E071
      SELECT aobj_name AS object btrkorr AS treq
          bas4date AS release_date bas4time AS release_time
          c~as4text
        INTO CORRESPONDING FIELDS OF TABLE lt_trdet
        FROM e071 AS a
          INNER JOIN e070 AS b ON
          atrkorr = btrkorr
          INNER JOIN e07t AS c ON
          ctrkorr = btrkorr
        WHERE c~langu  = 'EN'
          AND b~trstatus = 'R'
          AND a~pgmid <> 'CORR'
          AND a~obj_name IN s_object
          AND a~trkorr   IN s_treq
          AND c~as4text  LIKE lv_descr
        ORDER BY a~obj_name ASCENDING
          b~as4date DESCENDING
          b~as4time DESCENDING.
    Regards
    Priyanka

  • Error when try to release transport request

    I encounter some error during the release of transport request.
    First, when I go to SE10, it will show message "Global information cannot be read". Then, after I login, I try to release a request, it prompt me another message "Test call of transport control program (tp) ended with return code 0208". I had tried to update the tp.exe, but still the same error. Any clue to solve it?  Below is the error details:
    Test call of transport control program (tp) ended with return code 0208
    Message no. TK094
    Diagnosis
    Your transport request could not be exported, since all requirements were not fulfilled.
    Calling the transport control program tp
       "tp EXPCHK DVPK900006 pf=
    swisapfs01\sapmnt\trans\bin\TP_DOMAIN_PRD.PFL -Dtransdir="
    which checks the export requirements, returned the following information:
    Return code from tp: 0208
    Error text from tp: ERROR:
    System Response
    Further processing is terminated.
    Procedure
    Check the following points:
    Feasibility of the transport control program tp
    Parameter settings in the transport profile
    Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    Write authorization for the subdirectories
    Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed

    Hi,
    Any STMS operation will not work without the DIR_TRANS directory defined and accessible - and that seems to be the problem in your system.
    Set the transdir via links:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3d/ad5bb54ebc11d182bf0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1e/080c6401b011d284870000e8a57770/content.htm
    Regards,
    Srikishan

  • How do I AUTOMATICALLY generate Transport request for a Z table data?

    Hello friends,
    I would like to automatically create/generate a transport request for a Z table every time I change, add or delete data in that table.
    Currently, every time I modify data in the Z table, I need to go and manually create a transport request and then indicate keys for the row(s) which were modified. I find this a tedious, time consuming, and error prone process.
    So I would like to automate this process. That is to say, the transport request is generated for the rows that I modified. The same way as is done when you change a program. It automatically prompts you for a transport request thingy.
    Any ideas?
    Your help is greatly appreciated.

    You need to make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
    In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
    Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
    Also change the "delivery class' in the table attributes to 'C' - Customizing table

  • Approve critical objects in transport requests (ChaRM)

    Hi folks!
    When trying to create transport of copies from within a Change Document (status 'to be tested') the system checks for critical objects in transport requests and prompts a warning that critical objects are to be approved.
    I do not want the Change Manager to approve every transport request containing critical objects. I would more likely use this feature as information for the Developer so he is aware of working on critical objects. The Developer should be able to make the approval.
    What I found out: only the user whos Business Partner is assigned to Partner Function 'Change Manager" is allowed to make the approval.
    More detailed it seems to be Partner Function of type "0008 responsible person"
    I tried changing Partner Function Developer from "0016 service group" to "0008 responsible person" but the system won't let me have two Partner Functions of that type in one Change Document.
    Any suggestions?
    Thanks in advance.
    /cheers

    Hi,
    For any user to approve the change req or change doc, he should have the authorization
    In your case Developer has to approve means
    1. Create a Action definition and maintain the processing parameters for the definition, select the partner fn as Developer
    2. Create the customized status in your status profile and its corresponding Authorization code also.
    3. Assign the Authorization code for Developer under teh authorization object B_USERSTAT
    By this Developer wil get the authorization for approving the change doc for the particular status
    If solves your query then mark the thread as answered
    regards
    Naveen

Maybe you are looking for