Error when try to release transport request

I encounter some error during the release of transport request.
First, when I go to SE10, it will show message "Global information cannot be read". Then, after I login, I try to release a request, it prompt me another message "Test call of transport control program (tp) ended with return code 0208". I had tried to update the tp.exe, but still the same error. Any clue to solve it? Below is the error details:
Test call of transport control program (tp) ended with return code 0208
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK DVPK900006 pf=
swisapfs01\sapmnt\trans\bin\TP_DOMAIN_PRD.PFL -Dtransdir="
which checks the export requirements, returned the following information:
Return code from tp: 0208
Error text from tp: ERROR:
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed

Hi,
Any STMS operation will not work without the DIR_TRANS directory defined and accessible - and that seems to be the problem in your system.
Set the transdir via links:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3d/ad5bb54ebc11d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1e/080c6401b011d284870000e8a57770/content.htm
Regards,
Srikishan

Similar Messages

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

RFC error when trying to add transport request in queue in STMS..

Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.

Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers

Wizard Error ESR, I tried create transport request

Hello guys!
I have this problem when try create Order ( Transport request) from wizard ESR.
Cannot get default request (for applType: XI, user: xxxxx, sid: XS, SC: b9ca1bd07fb611df9997d6feac116089),
(service=com.sap.tms)
Can you send me any blogs of help than contemplates this error?
Notes: We are using Sap Netweaver 7.1
Edited by: ecruz2010 on Aug 18, 2011 2:32 PM
Edited by: ecruz2010 on Aug 18, 2011 3:06 PM
Edited by: ecruz2010 on Aug 18, 2011 3:06 PM

Hi,
Please check if the below thread is useful:
More Problems installing Enhanced CTS (CTS+) on PI 7.1 System
Regards,
Sanjeev.

Releasing Transport Request Error.

Hi all,
I have created the Query Objects under a Transport Request in Development System and has to be transported to the QA system.
One thing i have observed is, when u create a Transport request for an Object.
Two Transport Requests will be created,
For Example,
If "A" object is assigned a new transport request 1, two Requests will be assigned to this Object "A".
Those requests would be 1 and 2.
But here 1 request is empty and 2 request is holding the Object "A".
So while transporting the request 2, even since 1 is assigned to the object, even it should be transported,
but im gettin the following message as below and hence the Transport cannot be done,
"Task 1(TR 1) is unclassified and does not contain any objects,
As soon as you include objects in the task/request, the SAP system automatically assigns a type to the task"
So can any1 plz help me out what was the error and my next steps to be followed.
Thanks,
Sowrabh

Sowrabh,
It's like creating Task under one perticular Request no...
Go to RSA1-Transport comnnection _ Drag the query you are intended to transport and check whether all objects are under same request..If not change the Owner of the object to you userid and then try to create a request..
Cheer's
HVr.

Database tables holding details for a non - released transport request

Dear All,
We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
SAP kernel release 7.00, kernel patch number 173
Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
The problem is the following :
We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
We are now facing the following conflict :
One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
( This was done during the day of the data corruption)
When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
'Request lock on non u2013 existent task / request DEVK921426'
No details for the transport request DEVK921426 exist in either of the two directories :
/usr/sap/trans/data , /usr/sap/trans/cofiles
The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
Any clues would be highly appreciated.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Dear Volker,
Thank you very much for your interest.
The transport request of interest did not appear in transaction code SE03
Eliminating the record from table TLOCK indeed did solve the problem.
Thank you again.
Best regards.
Reda Khalifa

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Designer Workflow SharePoint 2013 error when try to assign a task forbidden

designer Workflow SharePoint 2013 error when try to assign a task
Next attempt scheduled in less than one minute. Details of last request: HTTP Forbidden to http://oursite/_vti_bin/client.svc/web/lists/getbyid(guid'3cd5739e-f243-4b75-a724-fdbee704913f')/ContentTypes
Correlation Id: 56baaedd-a2d1-4377-9277-89d20cbdf434
and then after cancel I get
RequestorId: da9fe991-f8d5-7f4a-7dc2-fec198a2a115. Details: System.ApplicationException: HTTP 403 {"x-ms-diagnostics":["30000000; reason=SSL is required"],"SPRequestGuid":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"request-id":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["151"],"SPIisLatency":["0"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Wed, 15 Jan 2014 17:49:27 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-Powered-By":["ASP.NET"]} at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the error occurred when you assigned a task.
Did you install any CU for SharePoint?
If yes, after an update has been performed, several Windows PowerShell cmdlets must be run in order to maintain the connection between the SharePoint Server 2013 farm and the Workflow Manager farm.
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite(<siteUri>)
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
After running the command, re-register the workflow service to see if the issue still occurs.
Register-SPWorkflowService: http://technet.microsoft.com/en-us/library/jj663115.aspx
More information are provided in the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Is it is possible to delete released transport requests...

Hi Experts,
I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
Thanks & Regards,
RAJ

HI,
Its not possible to delete the released transport request. You should have to follow transport procedure .
T-code for Transport Connection- Check in SE09/se10 for creating requests.
For collecting objects you have go Transport connection without missing the objects.
SE03 for checking the Request objects.
Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
Thanks
sudhakar.

Releasing transport requests with job roles take forever after upgrading to Netweaver 7

Dear experts,
Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
Afterwards, the import in our QAS and PRD system don't take longer than normal.
Apparently this time is taken by the Export phase:
Checks at Operating System Level
17.04.2014 09:50:03
(0) Successfully Completed
Pre-Export Methods
17.04.2014 09:50:37
(0) Successfully Completed
Export
17.04.2014 13:51:02
(0) Successfully Completed
Does anyone know what causes this and how to solve?
Kind regards,
Nicolas

Hello Nicolas,
What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
Hope this helps to investigate the issue
Regards,
Archana

Why this message? selected server returned an error when attempting to fulfill your request

been using my yahoo email for 2 months, but yesterday it wouldnt let me sign in.
it pops up the message: selected server returned an error when attemptingt to fulfill your request.
i tried to search and google this error message without much real sucess. people either didnt know or gave highly technicdal answers.
all other websites are fine, just cant access my yahoo email.
tia
Solved!
Go to Solution.

Hello !
Try signing in after connecting your device to WiFi.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

Releasing Transport Requests

Hi,
I want to release trasport requests weekly once,guide me for the same.
Thanku

Hi Harshit,
Releasing a transport request automatically is not a recommended practice .
It can lead to number of errors and inconsistencies .
Who will monitor the logs or may be developer want to add some more stuff in same TR.
So there should be no suggestion like releasing transport request automatically from consultant end.
Still if you need you can get some idea from here
Re: Automatic Release of Transport Request: By ABAP Program
Regards,
Gagan Deep Kaushal

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

Error when try to release transport request

Similar Messages

Maybe you are looking for