Transport Request status Hang

Hi all,
i have imported the request in production but from last 3 hrs its status is Running.
please help me. its urgent for me.
thanks in advance.

Hi Jayendra
This issue can be solved.
- You have to ensure that none import further transport.
- At the OS level kill the process TP
- At SAP lvel : STMS -> Import queue -> remove the requests with the status "RUNNING" (Truck Icon) manually
- Ensure that there exists no clogged entries in TRBAT & TRJOB table entries. If exists remove them ( TP must not running )
-- At SAP level via the transcation SE16 check the table TBSTAT, in the 2nd field , "TRKORR" enter your the concerned transport request number --> Execute
(you will see the concerned transport)
- At Oracle level connect as sysdba
--> Select from SAPR3.TBSTAT
--> Then: Delete from SAPR3.TBSTAT and commit
I have already done this and it works fine.
Cheers
Yacine

Similar Messages

How to know the Transport Request status?

Hi all,
i need to develop a report wherein i need to display the status of the Transport Request..i mean it should display wheteher it has move to the Production system?Is there any table or FM which gives the cross system details of the Transport Request.
Thanks in advance,
Rakesh.

Hi Rakesh,
Please check this FM.
TR_LOG_OVERVIEW_REQUEST_REMOTE
TR_LOG_OVERVIEW_REQUEST
TR_LOG_OVERVIEW_REQUESTS
Hope this will help.
Regarsds,
Ferry Lianto
Please reward points if helpful.

Transport Request status table

Hi All,
In se10, for a given transport id, i can check the status, i.e. if it has been transported to quality & production systems.
I would like to know in which table i can get this info, i.e. when it was transported to QAS & PRD
I am able to get the details of transports in e070 & e071, also in e071k if a transport has been made, but not able to get the full details which i need.
I checked the forum, but was unable to find any info on this.
Await inputs.
Vivek

Hi,
your question had been moved to the transport forum which is named "Software Logistics". It can be found in "Forum -> Expert Forums » SAP NetWeaver » Software Logistics". That's all.
Concerning the table e070 & e071 you mentioned - it's a cache which might be not up to date.
So it is strictly recommended not to use this.
The official method is the implementation of the BADI CTS_IMPORT_FEEDBACK.
This method is triggered at the end of each import and returns a table with the following structure:
TRKORR
TARSYSTEM
TARCLIENT
RETCODE
OWNER
PROJECT
Perhaps this helps - good luck
Regards
Frank
Edited by: Frank Misch on Dec 12, 2008 3:04 PM

After importing the transport request status is not changing to imported

Hi Experts,
I have added the data & cofiles from rollout system to sandbox system via sftp on os level. Now when I am trying to import these requests, the requests are not getting imported.
Can any one tell me the reason?
In tp system log, I found the following entry:
ERROR: /usr/sap/trans/cofiles/K999999.DEV : can't open
: Permission denied
OS is AIX
After transferring from rollout system to sandbox system, should we change permissions of the data & cofiles.
Please let me know. it is urgent
Thanks in advance.
--Hari

Hi Hari,
Yes you are right just go ahead and change the permissions, reimport it works.
Regards.
S.Manu

Checking Transport requests present in two different clients.

We have around 200 transport requests that have been transported by consultants from D01 to R01-client1/client2 and I need to check that which transport is present in which R01 system client.. i.e. a) how many of them are present in client 1, b) how many are in client 2 and c) how many are in both. We can check the logs of every transoprt through SE10 but Is there any quick/automated way of checking mass Transport Requests status ?

Dear Raichandi,
Please follow the below steps to get the desired information.
1. Login to D01 (Dev client) to find the released transports..
2. Execute transaction SE01
3. Go to "Transport" tab
4. Give User as "*"
5. Select "Request Type" by tick mark as Customizing Requests and Workbench Requests
6 Select "Request Status" by tick mark as "Released" only
7. Click on "Display Button"
8. It would display all the released transports requests.
9. From here you can copy and paste all these requests numbers in the spread sheet
(CTRL + Y) then use Mouse to select the requets, (CTRL +C), and then paste it in exel sheet.
1. Now Login to the R01 (QA client) to find the import status of the release transports from D01.
2. Execute transaction STMS
3. Click on "Import Overview (F5)" or the Truck Symbol.
4. It will take you to the Import Queues for the Import Domain D01.
5. This is the option where you can select the Queue to see the desired information for Quality/Stag/prod system.
6. Now double click on the required "Import Queue" for R01 (Quality system).
7. Now Go to "Import History or (CTRL+ F7)"
8. Change the Filters as required (may be for time interval or remove any filter on client -Clt)
9. The import History will display all the Imported requests in all clients in one system (SID), so for your case it will display requests for R01/client1 and R01/client2
10. Copy the same in the spread sheet...
11. Do the VLOOKUP to find which are not imported in which clients.
Please provide the feedback if it works.
Thanks,
Vinod

Unable to Import Transport Request - hanged with Truck icon

Dear SAP Expert,
Our DEV & QAS are on normal domain installation but Production installation is on HA Cluster on Windows.
We have configured the STMS for the CRM landscape system and domain is Development server. While trying to import all the Transport Request, it is getting hanged and showing in import running status (showing Truck icon).
We have checked some possible logs and reviewed the complete STMS configuration, profiles and process and found the BG job RDDIMPDP is not getting scheduled continuously.
The below error is from latest log file u201CSLOG1151.PCRu201D from F:\usr\sap\trans\log (global directory) from Production server for your review
WARNING: System PCR. Warning.        20111220144048 :
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=PCR pf=
VSAPPRDCRMSCS\sapmnt\PIS\SYS\profile\DEFAULT.PFL
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
I would request, please help me for resolving this issue immediately as our GO-LIVE date is nearby and have to import all the TRs from CRM QAS to this PRD servers.
Kindly let me know, if you need any further information.
Thanking you,
Devki Nandan

Hi,
This forum is for SAP application called as 'SAP Transportation Management'. Your query is irrelevant to this forum. Please look for an appropriate forum to post your query.
Regards,
Nageshwara Manda

Posting Key Field Status changes - unable to generate Transport request

Dear All,
I did posting key field status change from suppress to optional ( P.Key 24).
However I am unable to generate a transport request.
Please share your inputs
Thanks
Sanjai

Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
Regards
Abhay

To show the release status of the transport request

Hello Experts,
I am having a requirement like the following:
I need to list the transports along with the release status of the transport request in a View.
Release status means that transport request imported into Development system, Quality system and Production system.
Which table will hold this information?
I have checked with E070. But i dont know how to find in that. Or any other table is there to do this?
Thanks and Best Regards,
Suresh

Hello Kalyan,
I dont know how to find my request in TMSBUFTXT.
For example i am having a TR now in Dev system: XXX45678.
If i have imported it to Quality system, then how to find this entry?
Or if i have imported it to Production system, then how could i find that the TR XXX45678 is now in Production system.
Since i am creating a View, i need the information that in which Database Table this entry will be stored.
I dont want Function module name.
Best Regards,
Suresh

Transport request -repair status

Hi All
I have transport request in repair status...yellow in colour
Why does this happen? ( reasons; Did I do anything wrong?)
How to make the transport into normal status?
Thanks in advance

Hi Venkata,
It is showing 'Repair' status, as you are trying to make modifications to
either 1) a standard object using Access Key or 2) a semi-standard object which will not ask for a Access Key.
In case 1 & 2, the object / application would be developed by SAP.
In the 2nd case, you can do the customizing change provided you are sure that the application is used only for 1 purpose.
If it is used across projects, then the changes you are making will be affecting other's outputs also.
In that case, what you can do is copy the standard / semi-standard application and make the changes in your new custom application.
In some cases you will have to make some customizing changes to direct the control to the custom application rather than standard application.
It is always recommended to avoid any repairs being transported.
While SAP applies any patches, your changes to the object might get overwritten.
Please let us know if it answers your query.
Thanks,
Nisha Vengal.

Unable to manually set the BW request status from hanged yellow state

Hi All,
We were running a BW upload when it failed due to some ABAP dump. The request remained in the status yellow.
We tried to manually set the status to red or green in RSA1--> manage (infoprovider)
This did not allow me to reset the status there.
I searched the SDN and found this blog: http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2013/10/23/deleting-dtp-requests-when-the-dtp-step-is-hanged
But in our case the table : RSBKREQUEST shows "USTATE" and "TSTATE as "0"(zero). I can reset the status only when it shows 5. So running RSBM_GUI_CHANGE_USTATE in SE37 to reset the status to "0" (zero) is not an option here.
Iam sure others would have come across this situation before. If you could throw some light on how to reset the BW request status to RED or Green so that I can restart the load again.
Your help is really appreciated.
Thanks
Manmath

Hi,
please check the below tables have your DTP request ID.
Note: Be aware the deleting the request form the data base tables
RSBKREQUEST
RSREQDONE,
RSREQICODS,
RSICCONT
Thanks,
Phani.

Transport Request in PRD is in the IMPORT RUNNING status..

Hello Experts,
I have a problem while i m importing the request in PRD,the request is in the state of IMPORT RUNNING.
While i have imported the same request in the other systems DEV and QAS successfully.
I have seen the RDDIMPDP in sm37 it is getting cancelled. Then in 000 client i have runned the job RDDNEWPP with the DDIC user. And did the same in the PRD Live Clinet.
I have also triggered it in sm64 and then checked the job in sm37 the job is finished successfully but the request is still in the same state.
I have checked the consistency its all ok.
One of the request suddednly got imported and rest are still in the same Import Running state.
Now this made me curious if one got imported then why not other requests getting imported.
All the other requests are imported successfully in DEV and QAS successfully.
A couple of days ago i have made the changes to the Live Client in PRD for some requirment then i have revert back the changes to the non modifiable state. Does it have any effect on the transports. Because i have been facing this problem after the changes of the PRD Live Client.
Please i would appreciate if anyone can help me giving the proper solution.
Thanks.
Regards.
Mudassir Imtiaz.

Hello Anindya.
Thanks for your quick help. I have removed the entries from the table TRBAT and imported and it was successfully done.
Now the problem is for each transport request i have to see the job RDDIMPDP and schedule it because its getting cancelled and for each transport request i have delete the entries from TRBAT table. Can you tell me something by which i dont have to go delete the entries from the table TRBAT every time. And i still wonder why the job RDDIMPDP is getting cancelled. I have also scheduled RDDNEWPP in Client 000 with DDIC and still the same problem.
Another thing which i have noticed in sm21 is the job (RDDIMPDP) is getting scheduled in Application server but i have scheduled in DB server. Every time i have to schedule the job from sm36 give the DB server in Exec. Server and execute.
Thanks for your response.
Regards.
Mudassir Imtiaz.

Transport request hang

Dear all,
I have transported request from QA to Prod , but its still running ...
Kindly advise

Hi,
Check OS level whether, tp is running. Plus, check log file same name with transport request, SLOG and ALOG files under <Drive>:\usr\sap\trans\log
Best regards,
Orkun Gedik

Transport request main task releasing problem

Hi friends,
Environment is Linux, ECC5.0, Two system landscape,
I have problem with Transport Request task releasing when I am going to release the subtask that willbe released success fully when I am trying to releasing the main task that task is not released and at that time the system wil hang( mesg on the status bar is tp is connected success fully) thats it we wait for long time then also that looks thats only no log will be generating in usr/sap/trans/log there will be a log on this one that log is
WARNING:/usr/sap/trans/tmp/<username.LOS>is already in use (10), I'm waiting 3 sec(20070326124305). My name:pid 7265 on test(sd1adm)
after saw the this mesg I kill the 7265 pid then also same proablem.
I change the ownet of the request then the request is released but not uppeard in the import que. whn i am trying to import in que as manually that will appear in que but not importing when i press the import button the error is tp error 0203.
I check the both users authorizations also bothe authorizations also same then why it wil happening ???
then I check the nfc also that service also running ok the six services are 1.off 2.off 3.on 4. on 5.on 6.off.
I mount the trans dir also the mounting points also ok tms configuration is also ok
wt can i do plz help me with ur valuable suggessions
Thankyou
Ranjith

Hello Ranjith,
This is usually because the tp transport buffer lock file remains locked by the
operating system (OS).
You should be able to move or delete this file from the DIR_TRANS/tmp dir.
After that the tp should run fine after.
Thanks,
George

Error while exporting .epa file to transport request

Hi Experts,
I got a problem while exporting the transport package to transport request. In the last step of the export process, I am getting a status message as
"Could not release BIPortalContent.epa to transport request ABCD900005; consult your system administrator."
Can anyone help me in diagnosing this problem? I could not get a solution for this and due to this, the export process is stopped. I have tried with different transport requests and different authorizations, but result is the same.
I would appreciate your help in resolving this issue.
Thank You.
Regards,
Murthy J N.

Hi Bala,
Yes, I am using CTS
and I have tried all possibilities but the export to the transport request is not successful.
Regards,
Murthy.

Transport Requests

Hello Experts,
I am facing couple of issues in transporting the requests from Dev to QA environment.
Firstly when trying to replicate DS in QA, DS is replicated but it is in MOdified status (and Cannot activate because QA system is non modifiable status) . I just right click on the appln component & then replicated metadata . Is ther any step I'm missing or can be taken so that DS can be activated ?
Secondly when trying to move transport request for transformation between InfoSource & DS getting this error message "Message no. R7501"
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)"
Also along with this message also getting message :-
Source RSDS ZQMNOTIFICATION_STATUS2 SD2CLNTXXX does not exist
Above mentioned source SD2CLNTXXX is dev DS and transport req is only for transformation .
I'm not able to understand why transformation req b/w IS & DS is including source system name.
Please advice if anybody has faced this situation.
Thanks,
Murtuza.

Firstly when trying to replicate DS in QA, DS is replicated but it is in MOdified status (and Cannot activate because QA system is non modifiable status) .
I guess, this is due to different versions of support packs in DEV & QA.
After replication of Datasource, now u have to transport the same datasource from BI Dev to BI QA. So, that it should overwrite the replicated one.
Secondly when trying to move transport request for transformation between InfoSource & DS getting this error message "Message no. R7501"
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)"
Also along with this message also getting message :-
Source RSDS ZQMNOTIFICATION_STATUS2 SD2CLNTXXX does not exist
Above mentioned source SD2CLNTXXX is dev DS and transport req is only for transformation .
I'm not able to understand why transformation req b/w IS & DS is including source system name.
Since the datasource is not actively present in QA, thats why transportion of transformation throwing errors. to transport Transformation, Datasource & InfoSource must present in QA
Now, in BI Dev u should collect Datasource, Infosource, transformation and transport them to QA.

Transport Request status Hang

Similar Messages

Maybe you are looking for