Transport Service and master repository

Dear Experts,
I'm meeting unexpected system malfunctioning using the Transport Service on our Repository Server (CRM Release 2007 / 5.0 SP 09)
I am trying to push runtime objects to the CRM server but the operation fails. The system shows the messages:
- Sending to server Changelist: Failed
- Current repository is not a master repository. Data sent cannot be put in the run time queue...
- Pushing runtime objects from the server to the mobile client: Failed
- Repository is not listed as Master repository on the server
Thanks in advanced for your help.
Kind regards,
Alberto

Hi,
didn't you maintain an entry in Tx smobrepmain as mentioned in the inst guide?
Regards,
Wolfhard

Similar Messages

Cannot able to export Topology and Master Repository

Hi Gurus,
I cannot able to export the topology.. the error i am encountering with is as follows.
com.sunopsis.core.SnpsInexistantObjectException: SnpMtxt.getObjectByIdent: SnpMtxt does not exist
can anyone help me out why this error was getting and is there any other way to export the topology.
The same issue even for the Master Repository as well.
NOTE: succesfully exporting the Logical and Work repositories.
Any help is greatly appreciable.
Regards,
Pavan Kumar

Hi Pavan,
As far as I know that was a bug which should be fixed in 11g. Better you talk with Oracle support Team.

ODI work repository and master repository account locked unknown reason....

Hello,
It has just happened that the work repository and the master repository has been locked for an unknown reason. It is to be noted that a remote connection to the environment has been done from a different client environment than the one already has been set with. Upon trying to connect the credentials didn't pass and was was found locked for both the work repository and the master repository.
Help with the issue would be much appreciated with suspected causes of such incident.
Regards,

Hi,
could you compare resultset from this query
select CON_NAME,PASS from snp_connect where CONNECT_TYPE = 'R'
executed both on backup and "actual" master repository?

OTN Community Code Services and CVS Repository

Dear all,
An how-to paper from of the 5th of November in JDeveloper section explain the connection to OTN Community Code Services CVS Repository
I can't find any CVS repository in that section; Is that a project that has been delayed (or abandonned)!
thank you for your help
Of course I could use another hosted development system, but why ?

Gregory,
We are in the process of updating our CVS services (specifically for Linux) with the expectation of having the service back in place in the next 4-6 weeks.
I'm guessing from your note this is a service you are interested in using and so I will post to this thread as I get more news / information and an ETA.
Thanks, Andrew
OTN - Team

Exchange Server crashed while installing Transport service

Hi!
Having some massive issues with the initial install of Exchange 2013 SP1 on Windows Server 2012 Standard.
Basically, it has crashed multiple times and usually at the end of the install, so I end up with a partial installation which then needs to be manually removed as it won't remove it via the Programs and Features option.
I have finally got the error after doing the install from the powershell.
Take note, I am part of the Schema Groups and Domain Admins and have fulfilled the Exchange 2013 prerequisites.
The server came from Dell with Windows 2012 set up already, Ive just downloaded the Exchange 2013 iso from microsoft and mounted it.
I've tried also running the setup.exe as administrator (I am also logged in as the domain administrator)
The last command that I ran from power shell is this.
Setup.exe /mode:Install /role:ClientAccess,Mailbox /DomainController:SERVER /IAcceptExchangeServerLicenseTerms
Then I get the below error, regardless of the error the server has 16gb of memory with not much else going on, the hard drives have plenty of space so no issues there either.
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete
this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete
this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
The 2 things that I had to fix during install was that the registry was missing the FIPS entry, once I had manually created that entry again the Exchange installation got up installing the Mailbox role: Transport Service and then errored with the above message.
As this is a fairly new product theres not much information out there.
Any Help will be appreciated.
Thanks,
Cameron

Hi
Since you have mentioned that It has crashed multiple times its not successful its better to try the installation on a different PC or you can try formatting the box and proceed with the exchange installation since its a new Exchange 2013 installation.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

Transport Service Stops once a week & doesn't restart- causing mailflow issue

Hi All
I have a customer with Exchange Server 2013 Standard SP1. I have recently migrated them from Exchange 2010.
Single Server for All roles. VM has Trend Micro office scan agent installed. Server resource is adequate, Separate drive holds logs, exchange database.
The only Error / warnings I can find from Event logs are below
1) Event ID - 6002, Ping of Mailbox database timed out after 00.00.00 minutes
2) Event ID- 6027, MS Filtering failed to contact primary update path
3) Event ID- 16028, A lot of this event.
I have done a bit of searching and reading and seems like all the above could be ignored,
However my main concern is, I have noticed over the last couple of week that once a week Exchange Transport Service stops and fails to restart itself causing mail flow until staff tells me none is receiving email then I manually start the service.
Has someone ran it to something similar or can offer a solution? Perhaps a script that runs and checks transport service and if service failure detected then wait 1 minute to force restart it?
Thank you in advance.
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

I have gone through several troubleshooting as below
1) Made sure disabled Anti-malware agent in exchange
2) Made sure frontend connectors only have one 25 port as described in this article -
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2013/ManagementAdministration/exchange-server-2013-sp1-transport-service-stops-and-does-not-restart.html
3) Made sure to exclude folders that hold mailbox database from scanning by trend Micro officescan agent
4) Made sure the DNS is pointing currently and doesn't have any bindings to 127. address
5) Do not have any custom receive connector, the only modification I did to the default Hum transport and Default frontendTransport connector is that I have enabled anonymous user for both of this connector.
I am in the process of creating a powershell script with the help of (powershell boy) which does a service check via task scheduler and if found service not running then waits for 2 minutes and force
re-starts the transport service. If this work, it will be a band aid solution, however wondering if someone has found a permanent fix yet?
MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

Dataguard Log Transport Services Warning

Please, explain me. What mind Warning on Primary Server
SELECT a.facility, a.severity, a.ERROR_CODE, a.MESSAGE
FROM v_$dataguard_status a
where a.facility = 'Log Transport Services'
and a.severity = 'Warning';
result
FACILITY SEVERITY ERROR_CODE
MESSAGE
Log Transport Services Warning 0
LNS: Standby redo logfile selected for thread 1 sequence 136 for destination LOG_ARCHIVE_DEST_2
Log Transport Services Warning 0
ARC0: Standby redo logfile selected for thread 1 sequence 135 for destination LOG_ARCHIVE_DEST_2

In alertlog on Primary only message like :
Fri Jun 20 16:08:11 2008
LNS: Standby redo logfile selected for thread 1 sequence 146 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:12 2008
Thread 1 advanced to log sequence 147 (LGWR switch)
Current log# 3 seq# 147 mem# 0: /ora/oradata/testmain/redo31.log
Current log# 3 seq# 147 mem# 1: /ora/oradata/testmain/redo32.log
Fri Jun 20 16:08:12 2008
LNS: Standby redo logfile selected for thread 1 sequence 147 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:13 2008
Thread 1 advanced to log sequence 148 (LGWR switch)
Current log# 1 seq# 148 mem# 0: /ora/oradata/testmain/redo11.log
Current log# 1 seq# 148 mem# 1: /ora/oradata/testmain/redo12.log
and alert log Standby like:
Fri Jun 20 16:06:29 2008
Recovery of Online Redo Log: Thread 1 Group 5 Seq 145 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo51std.log
Mem# 1: /ora/oradata/maintest/redo52std.log
Fri Jun 20 16:08:11 2008
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Successfully opened standby log 4: '/ora/oradata/maintest/redo41std.log'
Fri Jun 20 16:08:11 2008
Media Recovery Waiting for thread 1 sequence 146 (in transit)
Fri Jun 20 16:08:11 2008
Recovery of Online Redo Log: Thread 1 Group 4 Seq 146 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo41std.log
Mem# 1: /ora/oradata/maintest/redo42std.log
I think that all work property. But I do not understand why message Warning?

SBS2011 - microsoft exchange transport service not installed

i have been having issues with SMTP and now with some changes advised I have lost the MS exchange Transport service all together - it is not listed under services!
how to I re-install just the transport service - and more - where did it go???
KArl

Hi:
Can't really tell from here what happened, but please review this article and let us know if it helps:
http://technet.microsoft.com/en-us/library/gg680345.aspx
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Microsoft Exchange Transport service terminated unexpectedly

Hi All,
We have configured exchange 2013 in windows server 2012. From last two days exchange transport service getting stopped.
Microsoft Exchange Transport service terminated unexpectedly.
Log Name:      System
Source:        Service Control Manager
Date:          11/13/2014 1:10:28 AM
Event ID:      7031
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      BMBPRMBX01.BMB.LOCAL
Description:
The Microsoft Exchange Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.

Hi,
This issue may due to some of the corrupt message in the queue. Please try these steps to solve this issue.
Pause the transport service and let all the messaged go out.
When queue is empty, stop the transport service and go to the mail.que database in transport-->queue folder. Cut paste all the files from queue folder to some other folder as backup.
Now start the transport service, it will create a fresh mail.que database and observe if the service us crashing again.
In addition, please try to disable any AV software, sometimes it will cause Transport service corrupted.
Best Regards.

Transport - Business services and Party components

Hi Folks ...
My SLD has Business systems with different names for each of my environment .
e.g. - ECC_DEV -> ECC_QAS ->ECC_PRD
and the transport targets takes care of the name changes when the objects are transported.
How can I use the same concept for Business services and Party services. these objects do not have an entry in the SLD hence i cannot use the transport target concept.
I Would like my services (both with and without party) to have different names in deifferent environments -\e.g. - BS_DEV -> BS_QAS -> BS_PRD.
Possible?
Regards,
Arvind R

Hi,
>>>Possible?
yes&no
- transport targets work only with business systems
- if you want to change changed names you can always
create a business system instead of a business service
but just make it third party business system
this way it will work later on
Regards,
Michal Krawczyk

11.5.10 and OCS10GR1 Content Services As a repository

Hi,
I Had succesfully integarted 11.5.10 With Oracle Files
But I did not succed to do same thing with Oracle Content Services 10GR1.
Do you know if there is a way to use Content Services as a repository.(Workaround)?
Thanks
JO

Now I just realized the old servers were RHEL4 32-bit and the new servers were by default created on RH 5 64-bit.
I'm pretty sure I can't just fire it up on a 64-bit OS without doing some extra work like export/import on the database.
App server not sure what I would do as libraries etc. would be different also.The apps tier node of EBS 11i is not certified on 64-bit Linux OS -- Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 [ID 343917.1]
My thought is to get the servers rebuilt using RH5 32-bit and everything should work hopefully as long as packages are there.
Sound right or should I just go with what it runs on now (RHEL4) to be on the safe side.What is your database version? Please note that Oracle9i is not certified on RHEL5, so if you are running on 10g/11g database you should be good to go with RHEL5
Thanks,
Hussein

Export and Import of master repository - error snpuser not found

We had installed ODI on a windows server and created physicla and logical topologies etc and developed some models and projects.
But we had sone all of this while still pointing to the demo master repository using the HypersonicSQL. This means we always have to have the 'Start Demo Agent' running etc.
So we wanted to move to an Oracle based master repository. I have used the 'Create Master Repository' function to create a new repository using ORacle thinnet driver and this is all OK and I can sign in to the SUPERVISOR user.
But when I export our existing repository from the 'HypersonocSQL' demo one to a ZIP file and then use the 'Import Master Repository' to create a master repository in the Oracle using thinnet driver etc - firstly it removes the repository details that I originally created - fair enough - then creates it all again but from the ZIP file.
The SNP_ tables all exist in the oracle database user and I can see that in SNP_USER there is the record for SUPERVISOR etc.
But when I try to sign in to this through topology manager or security manager - as SUPERVISOR I immediately get the error 'SNPUser does not exist'
Am I doing something wrong with exporting my 'demo' master repository and trying to import it in to the new Oracle repository ?

thanks - but that is effectivley what I did - used the repository import from my exported ZIP file - and it all imported OK - but the error on login to topology manager afterwards is that the snp user does not exist.
Although I initially used the 'Master Repository Creation' I then adaondoned this - dropped and recreated my Oracle user 'snpm' that owns the master repository and used the import repository approach.
I am trying to sign in as the standard SUPERVISOR user (that existed OK in the Hypersonic master repository that was exported to the ZIP file) and also trying other users that I know existed in the Hypersonic reporitory that I exported - same problem. I can see in Oracle SQL*Plus that in the SNP_USERS table the SUPERVISOR user exists.
If I do instead carry out a standard 'Create Master Repository' and do NOT try to import anything then it works OK and I can sign in to the Topology Manager as SUPERVISOR.

MS Exchange server 2010 messages will be placed in the poison queue and the transport service will crash

Can any1 please help.
We have Exchange server 2010, we just upgraded it with SP3 and then the issue occers that we were unable to send n receive mail outside of our LAN...i mean from gmail or hotmail..
we have then updated with CU4 which is the latest but still messages will be placed in the poison queue and the transport service will crash.
We have disabled the antivirus also but issue remains same.
We have CAS 1 n 2 as of Clustering environment and we upgraded sp3 for both. but we did CU4 on CAS1 to see the results to resovle this issue but no luck

Hi,
Did you get any NDR message now when you send a email to outside? And vice versa.
In addtion,I recommend you telnet to port 25 to test SMTP communication.
If any question,please feel free to post here.
Thanks.
Niko Cheng
TechNet Community Support

Master and work Repository

Hi,
Can we create Master and work repository in one oracle schema.
And can we create work2 respository in oracle schema2.
Do we find any issues later.
Please advice

As far as I know it is not recommended solution to create both master and work repositories in one Oracle schema, better create them as separate schemas.

Transport PC and CC master data

Hi,
Can we transport profit and cost center master data? I didn't see that option on menu when I created one.
Also, I tried transporting std hierarchy, which is allowed and in there I checked Profit center master data to be transport along. But my questions are:
1. Whether complete list is transported or are only the Profit center under the highlighted node get transported?
2. Do they get copied into other clients in active/inactive state?
3. Does the transport carry only the changes or the complete hierarchy?
Please advise!
Thanks!
N.

1. If the hierarchy was already created and transported and now I make some more changes to it, will the transport carry the whole of hierarchy or only the changes.
Entire Hierarchy
2. Though there is a check box for only std hierarchy, still does that mean both std and alternative hierarchy will be tranported.
I think just the std hierarchy
3. There seems to be no way I could select the cost/profit centers specifically in these transactions. Does that mean all the profit and cost centers in the client will get transported.
Yes
4. I am assuming they will be transported in active state if activated in originating client. Is that correct?
Yes
Using above transaction, it is always suggested to transport hierarchy, profit centers and groups together; as groups are just sets and if not transported could cause inconsistencies in the target system.
Here is SAP's recommendation on transporting PC master data.
Recommendation
1. Always transport the following objects together to avoid inconsistencies in the target system:
The standard hierarchy and the profit center groups represent logical sets of profit centers. Transporting these sets separately could lead to inconsistencies if the corresponding profit centers (master data) do not exist or are incorrect in the target system.
2. If you have transported profit centers, restart the matchcode data in the target system so that the transported master data can be displayed using the "Possible entries" function.

Transport Service and master repository

Similar Messages

Maybe you are looking for