Transporting a BADI

Hi,
I am new to BADI. I am working on SAP Auto-Id infrastructure 4.0 (used in RFID projects) there is a Custom BADI which is implemented in one SAP AII system. I need to copy this to other SAP AII system.
How to create a Transport Request for Custom BADI.
Thanks

Hi
Check this link:
Re: How to transport a BADi and Class?
Create a Transport request .
Then Goto -> Object directory entry
Then Change the package and then attach the entry to a transport request created by you.
And check this link for BADI Implementation:
/message/1388382#1388382 [original link is broken]
Regards
Neha
Edited by: Neha Shukla on Dec 2, 2008 11:00 PM

Similar Messages

B2B-50079 Transport Error : Bad Message

Hi All,
I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
The use proxy is checked in the Channels of the Trading Partner.
The transfer fails while transfering the file to the TP with the below error.
"B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
Also i have verified that the certificate and host,port username details to connect to the TP are correct.
Please let us know on what the problem area could be.
There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Thanks Anuj for the response.
We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
Please let us know if there is any other configurations which we can check.
Thanks,
Sirisha

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Transport system BADIs

Hello, ladies and gentlemen,
I have a question regarding the BADIs in the transport system. I would like to implement the code inspector check of the transport request with some additional features. I know there is the BADI called CTS_REQUEST_CHECK. This one is launched before the standard code inspector integration into the transport system. That means that at the moment when it is executed, I have no idea what will be the users reaction to the "situation".
Can anbody suggest how to reuse the interaction between the system and the user when releasing the request, but still integrate the code inspector there? One of the options would be to have a BADI which is called AFTER the transport with SCI warnings was released.
Any ideas welcome:))
Thanks Otto

Thanks gentlemen,
but I see no news for me. I named one of the BADIs in my original post, I also researched the SE18 entries, I found all this information already. My question is whether there us way how to trick the system (or find another spot) so I can process stuff AFTER the release. I am interested in the state when there were SCI messages but the admin decided to "release anyway". When I only have a BADI which is called before the standard procedure I can`t access the information "what really happens". That means that I either have to dig out all the standard functionality and reuse it in my custom code (and then turn off the standard solution) or let the standard to do the job and process the information after everything happens.
Thanks for your time and effort anyway,
cheers Otto

Problem in transporting MIGO BADI screen exit?

Hi all,
I have implemented MB_MIGO_BADI for screen-exit of the MIGO.
Whem transporting I am getting an error that
Table ZMIGO_BADI_EX_SCREEN_FIELD could not be activated
(E- Routine EXPAND (Table ZMIGO_BADI_EX_SCREEN_FIELD could not be expanded) )
Table Type ZTY_T_EXTDATA could not be activated
(E- Row type ZMIGO_BADI_EX_SCREEN_FIELD is not active or does not exist ) .
But this row type is in the same request number and activated also ?
I am unable to identify the reason. Please help me to solve this problem?
Thanks,
Vamshi

Hi,
Go to se80 and display the program name which you might have given in methof IF_EX_MB_MIGO_BADI~PBO_DETAIL and activate the screen which you have created,
Thanks,
Shailaja Ainala.

Problem while releasing a transport request to Quality for BADI

Hi i have implemeted a BADI for ME21N User exit.
I have transported the BADI to Quality.
It is giving an syntax error.
But iam not getting any error message in Development.

Error in ABAP application program.
The current ABAP program "CL_EXIT_MASTER================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "ZCL_IM__ITMETAL_ME21N=========CP ", the following syntax error
occurred
in the Include "ZCL_IM__ITMETAL_ME21N=========CP " in line 5:
"INCLUDE report "ZCL_IM__ITMETAL_ME21N=========CL" not found."
This is what the error iam getting .
But iam not able to see this include anywhere in SAP.
I

Implementing Transport Naming convention with the help of BAdIs (Urgent)

Hi Gurus,
We need to implement Transport Naming convention in our landscape.
Transport request should follow the following naming conventions and to enable this we have to enable some necessary BAdIs?
Scenario would be like this....!
Customization
LC-<Track>-<Description> (Non Transportable Request)
<Module>-<Track>-<Configuration Type>-<Change No>-<Description of the Customisation.>
ABAP Developments
AB-<Track>-<Configuration Type>-<Development No>-<Description of the Development>
OSS Notes
BC-<Track>-OSS#<OSS Note No>-<Version>-<Patch Number>-<Process Team>-<Note Description>
Authorization
BA-<Track>-<Version>-<Authorisation Description>
Details :
Track : 01 u2013 Hot fixing, 02 u2013 Implementation, 03 u2013 BIW / EP, 04 u2013 Support
Module : SAP Module (FI, CO, MM, SD, PP, etc..)
Configuration Type : I u2013 Initial Configuration, R u2013 Change due to TPR or Additional Functionality
Change No / Development No : Unique no to trance the base documentation
Please suggest .....................!
Which are the necessary BAdIs needs to be enabled and what other configuration needs to be done.
If anybody has any document please provide.
Thanks in advance..............!!!
Regards,
Jai Sach

Hello,
SPRO --> SAP NetWeaver --> Application Server -->
System administration --> Change & Transport domain
--> BADI -->Business Add-In when Editing Requests
IF_EX_CTS_REQUEST_CHECK~CHECK_BEFORE_CREATION
Happy Tony

BPC Transports for the first time

Hello,
I am planning to transport my appset for the very first time. I need your guidance on the following:
1) Do I use Backup & Restore or UJBPCTR method? Pros and Cons?
2) Is the process to collect a transport in UJBPCTR once I am complete with the design and ready to move to QA? Will that capture all the changes if I do this? Also, should the appset be offline when I do this?
3) How do I migrate the SAP transports (how-tos on Destination AP etc) across landscapes? I cannot collect them as transports. Should I request BASIS to import into each landscape?
4) Do I need my appset to be transported before transporting my BADIs or it does not really matter?
5) I have heard few issues abt BPFs during transports. Is there any precaution I need to take?
I am on BPC 7.5NW SP04.
Thanks for your help and inputs.

1) Do I use Backup & Restore or UJBPCTR method? Pros and Cons?
I would not suggest to use backup/restore for transporting your appset through the landscape. Use the UJBPCTR to create your transport request and allow the transports framework to import your appset into other systems.
2) Is the process to collect a transport in UJBPCTR once I am complete with the design and ready to move to QA? Will that capture all the changes if I do this? Also, should the appset be offline when I do this?
Yes, you should create the transport request using UJBPCTR only when you are ready to transport the appset to other systems. When you run UJBPCTR, it will load metadata records into a shadow table, and this will be a snapshot of the appset at that time. So if you modify the appset after creating the request, these changes will not be reflected in the request. Yes, the appset needs to be offline to create the request.
3) How do I migrate the SAP transports (how-tos on Destination AP etc) across landscapes? I cannot collect them as transports. Should I request BASIS to import into each landscape?
Any transports associated with how-to guides should be imported and promoted to other systems via your basis people.
4) Do I need my appset to be transported before transporting my BADIs or it does not really matter?
The order does not matter. I would suggest that your badis be transported first, as this makes sense as something is dependent on them. But if you were to transport the AppSet first, it will not fail due to missing BAdIs, so again, it doesn't really matter.
5) I have heard few issues abt BPFs during transports. Is there any precaution I need to take?Not sure what you are referring to here. I believe only the templates are transported, and not the instances, and I have not heard any issues around this yet.
Regards,
Rich Heilman

STO classic scenario SRM 4.0

Hi All,
We create SC that transferred to STO (Stock Transfer Order).
With the Classic Scenario(SRM 4.0) we use BBP_CREAT_PO_BACK.
A STO is created but the number of the STO is not displayed in SC.
Any suggestion ?
Thanks in Advance..
Moti

Hi Christophe
I) In CS - Did you use the scenario were a SC is transferred to a STO in R/3?
II) In ECS - Did you use the scenario were a SC is transferred to a PO in SRM and a STO in R/3?
Here are more detail of whate i have done:
A. In the Classic Scenario
I) Standard Purchse Order (this one works fine):-
I adapted the BADI BBP_CREATE_PO_BACK as follows :
1. Changing the document from EC to NB,
2. Changing the Vendor from 1000000272 to 1000000271,
Run the program - CLEAN_REQREQ_UP.
The system as expected - A PO is created and
In the Follow-on Document, in the SC, I get tow messages:
1. Shopping Cart 1000000508/1 Follow-on Document Created
2. Purchase Order 4400002238/1
II) Stock transport Order (here the problem arises):-
In order to create a STO
I adapted the BADI BBP_CREATE_PO_BACK as follows :
1. Changing the document type from EC to UB (STO),
2. Changing the Vendor to a Supplying Plant 236 (The central warehouse),
3. Changing the Item category 7 (U - Transport),
Run the program - CLEAN_REQREQ_UP.
A STO is created (Number 4400002239) but the number of the PO is not in
the SC.
In the Follow-on Document in the SC I get only onr tow message:
1. Shopping Cart 1000000511/1 Follow-on Document Created
To confirm the goods receipt of that STO from the status screen I get the messsge: 'PO 1 contains no items for confirmation'.
When confirming the goods receipt from the Confirm Goods/Service I get the message: 'PO 4400002239 contains no items for confirmation'.
B. In the Extended Classic Scenario
I adapted the BADI BBP_ECS_PO_OUT_BADI as follows :
Document type - UB (STO),
Supplying Plant 1000 (The central warehouse),
Item category 7 (U - Transport),
The BADI use the BAPI BAPI_PO_CREATE1.
The BAPI_PO_CREATE1 returns the following listed error messages:
'Net price must be greater than 0'.
Because the BAPI is activated whith extra parameters like: Invoice Receipt Indicator and Partial Invoice
Your help is appreciated.
Rgds
Yoram

Power Mac Video Capture card for G5 Quad

Can anyone direct me to where I can get a video capture card for my Power Mac G5 Quad.
I would like to directly connect my DVD player to my G5.
Can I do this and what do I need and where can I get it. Thank you for your guidance!

Canto makes a nice firewire video digitizer for under $ 200 that will handle full (non-HD) resolution video. If you already have a mini-dv camera or can find a used one cheap (maybe one where the tape transport is bad) you can connect the camera to your G5 via Firewire, and then use the camera's auxiliary video and audio inputs to connect the source you want to digitize.

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

User Exit Or BADi for Ship-to-Party's Transportation Zone F4 Help in VA01

Dear Experts,
I want to change the F4 help of Transportation Zone in Ship-to-Party Address in VA01.
I have to show the possible entries from Z table which is compared by the city of that particular customer.
Explanation:
1. Go to Transaction VA01.
2. Enter the values in first screen and Enter.
3. select the sold to party and ship to party and Enter.
4. Enter any item in item level.
5. Press Display Doc. Header ICON.
6. Go to partners tab.
7. Double click on Ship to party.
8. One Pop up screen will open. (ie. Address from Master Data for Ship-to-Party (Document Header).
9. Press F4 help for the field Transportation Zone. (It will show the possible entries from the table TZONE (All records).
10. I want to show the possible entries only for that particular city.(For a particular city there may be more than one transportation zone. I will maintain these records in Z table ).
I have tried all user exit from the program MV45AFZZ and ADDRESS_SUBSCREEN BAdI. But I could not get the solution.
Please help help me to do this.
Thanks,
Maruthamuthu

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

User Exit / BADI or similar...for transaction SE10 (Transport Organizer)

Hi folks.
I am working with ECC 6.0 and I would like to kow if there is an user exit (that works during creation of a Request (workbench and customizing) ) that could give me the request number that is being created during that moment.
There are some exits/badis for the releaseing moment/changing of a request, but I need some procees that could give me the request number being created !!!
Example:
BADI: CL_IM_CTS_REQUEST_CHECK / method IF_EX_CTS_REQUEST_CHECK~CHECK_BEFORE_CREATION, does not have, at that moment, the request number that is being created, since the request number is created by SAP a few moments before this method...
Does anyone already implemented a process like this one before ?
Thansk in advance!!

I don't think there is one, but you may either implement an implicit enhancement option (routine GET_NEXT_NUMBER in program SAPLSTRD), or make a custom program which creates transport requests (it is then easier to get the number).

BADI UserExit Required for Before transport Request is created

Hi Friends,
I have a problem in implementing :
We have two development client one for support and other for development.
Same object can be worked together in both client simultaneously that is causing lot of synchronization problem in both client.
Can any one suggest any BADI which i can use when creating Transport Request to check if the same object is locked in other client or not using the RFC.
Please provide if there is any solution to implement the same.

Hi
Check the following BADI's
<b>
CTS_REQUEST_CHECK               Request checks</b>
CTS_EXPORT_FEEDBACK           Feedback after export of a transport request
CTS_IMPORT_FEEDBACK           Feedback after import of transport requests
CTS_INT_REQUEST_CHCK          Internal: Request Checks
CTS_TASKDOC_TEMPLATE        Determine template for the task documentation
<b>Reward points for useful Answers</b>
Regards
Anji

Badi/Enhancement to while creating a transport request

Hi Friends,
Please let me know if there any enhancement or Badi while creating a transport request to add a additional field while creating a transport request.
I found below list of badis but are not relevant to my requirement
CTS_EXPORT_FEEDBACK
CTS_IMPORT_FEEDBACK
CTS_INT_REQUEST_CHCK
CTS_REQUEST_CHECK
CTS_TASKDOC_TEMPLATE
Thanks in advance

solution removed, not correct.
Edited by: vishal kapoor on Nov 28, 2008 2:41 PM

Transporting a BADI

Similar Messages

Maybe you are looking for