Transporting "Deleted records" with TABU
Hi everybody,
I have a Z table defined as customizing (Delivery Class C)
We are updating it using a special dialog program we developed that doesn't creates change request.
usually the changes in this table are small (only a few records) and we repeat the changes using the same dialog program in further environments (QA, PROD).
I have to make a big amount of changes in the table contain, most of them deletions.
I was thinking of creating a change request manually using TABU but I could not find a way of defining a delete in the change request.
when I delete a record from an usual SM30 it creates the TABU entry + the key in the change request and it looks exactly like an adding in the table.
My question is: How can I ensure that the record that I deleted in DEV will be deleted in QA & PROD using the change request ?
Thank you very much
Gilbert COHEN
Hi
I know the problem, but you can create that MAINTENACE and not transport it in prod, so u use it in dev and/or quality system only.
Anyway I can't see any difference too, so I believe the line of kind TABU can be the same if it needs to insert or update or delete a record, I suppose the system decides which action to be done after releasing the request. Probably here it checks the record in the table:
- if it exists it means it has to be inserted/updated
- if it doesn't exist it means it has to be deleted.
So you can try to change a few record in the table (one updating and one deleting), create, release and trasport the request for these changing in QA system. Here see the result.
Max
Similar Messages
-
How to deal with delete record in generic delta of generic datasource
Hi,
Anyone can give me suggestion about the delete record in generic delta of generic data. I need extract data with a generic datasource and hope deleted record in datasource also can be "delete" in next delta extraction. I do a test with generic delta. It seem that the delete record can not be updated in ODS. but updated record can be updated in next delta extraction.
How dose BW generic delta deal with the deleted record with generic delta mechanisim? Or how can I use generic delta mechanisim to realize that BW "delete" the deleted record of source system in ODS with delta extraction?
Thanks in advance!
BillyDelete is not supported in delta mechanism of generic delta extractor. You will need to add a workaround for that.
- Capture the deleted records somewhere (maybe enhance the txn deleting the record so the key is written to a Z table). Take these records to BW and manipulate the recordmode to affect deletion of corresponding record from ODS.
- If your generic delta is based on FM, and if the 'delete' is captured in change document tables, add the logic to check change document tables whether any records are deleted, and if yes, send those to BW with appropriate recordmode to achieve deletion. -
Deleted records are not captured in 2lis_02_itm
Hi SDN,
I am extracting Purchase order records(more specifically Outline agreements ME23K) from 2LIS_02_ITM.
When I delete a PO with Purchase Order History in ME23K and save it I am able to see the change recorded in LBWQ and now i run the collective run in LBWE I can see the total coloum in RSA7 filling with value 1.
Now when i try to see the record in in RSA7 it is showing nothing and also when the delta infopackage is run zero records are being pulled.
In a nutshell I am missing the deleted records with Extractor.
Is there any way I can see the actual delta record sitting in LBWQ after the deletion is posted.
Please help me out folksHi,
check this notes:
FAQ: Business Warehouse (BW) in Purchasing
SAP Note Number: [459517|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343539353137%7d]
Note [527490|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=527490] - BW: Deletion indicator not set correctly - Part 2
Regards
Andreas -
Want to crate a bc set with transport request,which has deleted records
Hi
I need a help in BC sets regarding records deletion.
I want to create a BC sets with the transport, which has one deleted records from the table
I have 30 records in table. I have deleted one record and created transport for the same.
When I try to create BC sets with the above transport. It is not showing records, which is in Transport request.
Could you please help me on this How can we create BC sets with deleted records.
Thanks and Regards,
VenkatHai,
Please check the following link.....
http://help.sap.com/saphelp_nw70/helpdata/en/a6/c3a768465411d395c600a0c930dcc1/frameset.htm
Regards,
Yoganand.V -
Procedure to delete mutiple table records with 1000 rows at a time
Hello Champs,
I am having requirement to create procedure to achive the deletes from 5 big tables. 1 master table and 4 child tables. Each table has 28 millions records. Now I have to schedule a procedure to run it on daily basis to delete approximately 500k records from each tables. But the condition is: Seperate procedures for each tables and delete only 1000 rows at a time. The plan is below. Since I am new for writing complicate procedure, I don't have much idea how to code the procedures, can some one help me to design the procedure queries. Many Thanks
1. Fetch 1000 rows from master table with where clause condition.
2. Match them with each child tables and delete the records.
3. Atlast delete those 1000 rows from master table.
4. over all commit for all 5 X 1000 records.
5. Repeat the steps 1 to 4 till no rows to fetch from master table.
Below are detailed procedure plan:----
----- Main procedure to fetch 1000 rows at a time and providing them as input to 5 different procedures to delete records, repeating same steps till no rows to fetch i.e. (i=0)-----
Create procedure fetch_record_from_master_table:
loop
i = Select column1 from mastertable where <somecondition> and rowcount <= 1000;
call procedure 1 and i rows as input;
call procedure 2 and i rows as input;
call procedure 3 and i rows as input;
call procedure 4 and i rows as input;
call procedure 5 and i rows as input;
commit;
exit when i=0
end loop;
----- Sepereate procedure's to delete records from each child tables------
Create procedure 1 with input:
delete from child_table1 where column1=input rows of master table;
Create procedure 2 with input:
delete from child_table2 where column1=input rows of master table;
Create procedure 3 with input:
delete from child_table3 where column1=input rows of master table;
Create procedure 4 with input:
delete from child_table4 where column1=input rows of master table;
--- procedure to delete records from master table atlast----
Create procedure 5 with input:
delete from Master_table where column1=input rows of master table;Oops, but this will work, won't it?
begin
execute immediate 'truncate table child_table1';
execute immediate ' truncate table child_table2';
execute immediate ' truncate table child_table3';
execute immediate ' truncate table child_table4';
for r_fk in ( select table_name, constraint_name
from user_constraints
where table_name = 'MASTER_TABLE'
and constraint_type = 'R'
loop
execute immediate 'ALTER TABLE ' || r_fk.table_name || ' MODIFY CONSTRAINT ' || r_fk.constraint_name || ' DISABLE';
end loop;
execute immediate ' truncate table master_table';
for r_fk in ( select table_name, constraint_name
from user_constraints
where table_name = 'MASTER_TABLE'
and constraint_type = 'R'
loop
execute immediate 'ALTER TABLE ' || r_fk.table_name || ' MODIFY CONSTRAINT ' || r_fk.constraint_name || ' ENABLE';
end loop;
end;
/ Or
truncate table child_table1;
truncate table child_table2;
truncate table child_table3;
truncate table child_table4;
begin
for r_fk in ( select table_name, constraint_name
from user_constraints
where table_name = 'MASTER_TABLE'
and constraint_type = 'R'
loop
execute immediate 'ALTER TABLE ' || r_fk.table_name || ' MODIFY CONSTRAINT ' || r_fk.constraint_name || ' DISABLE';
end loop;
end;
truncate table master_table;
begin
for r_fk in ( select table_name, constraint_name
from user_constraints
where table_name = 'MASTER_TABLE'
and constraint_type = 'R'
loop
execute immediate 'ALTER TABLE ' || r_fk.table_name || ' MODIFY CONSTRAINT ' || r_fk.constraint_name || ' ENABLE';
end loop;
end;
/ -
The correct way to delete old transport request record ?
Dear all,
We want to delete old transport request record before 2008 (two years before) of our system.
We learn that we should delete the records in the below two path:
/usr/sap/trans/data
/usr/sap/trans/cofiles
Our target is that we will not see the old record after deleting in our PRD system.
Normally, we see the transport request record in system by this way:
STMS --> import overview --> PRD --> Import Queue system PRD --> Import history
Our question is do we need to restart our system after delete the record to refresh the Import history?
We have not delete the record now.
Any experienced or expert, please kindly give advice.
Regards,
AllenHello Allen,
there are some notes and documentations for this process. Deleting the files from /cofiles and /data will not erase the request from the import history, as you already know.
You should follow note #41732 to have the requests/data completely deleted from your system. There is a lot of complementary reading in notes #7224, #556734, #189841, etc.
Note that you can remove the request from the import queue, import history, data and cofiles subdirectory, but still have it on the <SID> buffer (located in /usr/sap/trans/buffer/<SID>). If this happens to you, please save a copy of the buffer file <SID>, then create a new, blank file named <SID> at a time when the import queue is empty (VERY IMPORTANT). Or, alternatively, please excute the tp cleanbuffer FIL command (which will erase the requests that are not found in /data and /cofiles directories).
--> Please test this first on a test system, not directly on a productive environment.
This should be enough to delete old transport requests on your system.
Best regards,
Tomas Black -
SUN TEAM: Bugs in update and delete a record with long query
Creator Team,
In my opinio there is a bug issue with update and delete a record with a complex sql query. I�m using oracleXE and ojdbc14.ar with tomcat
In just two page I�m receving the following msg (I have 12 pages doing the same thing with less complex queries)
* Number of conflicts while synchronizing: 1 SyncResolver.DELETE_ROW_CONFLICT row 2 won't delete as values in database have changed: 2006-11-29
* Cannot commit changes: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 0 values changed in database
when i tried to delete or commit the updated changes in the register...
The interesting is that this code function with jdbc of jsc...
My query is bellow:
SELECT ALL PATRIMONIO.TB_BEM.INCODIGOBEM,
PATRIMONIO.TB_BEM.VATOMBAMENTO,
PATRIMONIO.TB_BEM.VAMATERIAL,
PATRIMONIO.TB_BEM.INCODIGOSETOR,
PATRIMONIO.TB_SETOR.VANOME AS NOMESETOR,
PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR,
PATRIMONIO.TB_FORNECEDOR.VANOME AS NOMEFORNECEDOR,
PATRIMONIO.TB_BEM.DACHEGADA ,
PATRIMONIO.TB_BEM.DASAIDAPREVISTA,
PATRIMONIO.TB_BEM.DASAIDAEFETIVA,
PATRIMONIO.TB_BEM.VAMARCA,
PATRIMONIO.TB_BEM.VAMODELO,
PATRIMONIO.TB_BEM.VADESBAIXABEM,
PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO,
PATRIMONIO.TB_TIPOAQUISICAO.VANOME AS NOMETIPOAQUISICAO
FROM PATRIMONIO.TB_BEM , PATRIMONIO.TB_TIPOAQUISICAO, PATRIMONIO.TB_SETOR, PATRIMONIO.TB_FORNECEDOR
WHERE PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO = PATRIMONIO.TB_TIPOAQUISICAO.INCODIGOTIPOAQUISICAO
AND PATRIMONIO.TB_BEM.INCODIGOSETOR = PATRIMONIO.TB_SETOR.INCODIGOSETOR
AND PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR = PATRIMONIO.TB_FORNECEDOR.INCODIGOFORNECEDOR
AND PATRIMONIO.TB_BEM.INCODIGOBEM LIKE ?
AND PATRIMONIO.TB_BEM.VATOMBAMENTO LIKE ?
AND PATRIMONIO.TB_BEM.VAMATERIAL LIKE ?
AND PATRIMONIO.TB_SETOR.VANOME LIKE ?
AND PATRIMONIO.TB_FORNECEDOR.VANOME LIKE ?
ORDER BY PATRIMONIO.TB_BEM.VATOMBAMENTO ASC
Why this problem is happing? Did you had some solution for that? Is the problem because the query is too long?!
please help me!
Gustavo CallouHello people,
I�m doing this to try to solution that bug:
This code is working fine... but I do not understand why I�m receiving the nullpointer exception!??!!?
// create a new rowset
CachedRowSetXImpl pkRowSet = new CachedRowSetXImpl();
try {
RowKey rk = tableRowGroup1.getRowKey();
if (rk != null) {
// set the rowset to use the Patrimonio database
pkRowSet.setDataSourceName("java:comp/env/jdbc/Patrimonio");
String query = "DELETE FROM TB_BEM WHERE INCODIGOBEM = "+tb_bemDataProvider.getValue("INCODIGOBEM", rk).toString();
pkRowSet.setCommand(query);
pkRowSet.setTableName("TB_BEM");
// execute the rowset -- which will contain a single row and single column
pkRowSet.execute();
pkRowSet.next();
info("Apagado");
} catch (Exception ex) {
log("ErrorDescription", ex);
error(getApplicationBean1().trateException(ex.getMessage()));
} finally {
pkRowSet.close();
Please someone help me!!!
Gustavo Callou -
How do you delete records from table with data in a select option
how do you delete records from table with relevant to data in a select option..how to write coding
Hi,
Try
if not s_select_option [ ] is initial.
delete * from table
where field in s_select_option.
endif.
commit work.
Be careful though. If select option is emty, you will delete the entire table.
Regards,
Arek -
Can I retrieve a deleted video that was recorded with my iPad and not backed up?
I deleted a video that was recorded with my iPad & was not backed up. Is there any way to retrieve it?
No.
-
Displaying ALV agan with deleted record not shown....
Hello Gurus,
I am working on ALV. The ALV deipalys data froma custom table. Now I have created a Button in application toollbar saying 'Delete'. I have wrirren logic in 'ALV_UC (i_callback_user_command) so that when user pushes 'Delete' button, the data record gets deleted from custom table.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lv_progname
i_callback_pf_status_set = 'ALV_STAT'
i_callback_user_command = 'ALV_UC'
* i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = is_layout
it_fieldcat = field_lst
* is_variant = g_variant
it_event_exit = gt_event_exit
i_save = 'A'
it_sort = it_sort
i_screen_start_column = i_start_col
i_screen_start_line = i_start_ln
i_screen_end_column = i_end_col
i_screen_end_line = i_end_ln
tables
t_outtab = p_outtab
exceptions
program_error = 1
others = 2.
Now, I want the ALV to be dsiplayed with that deleted record not shown. How can I do this ? Is there a Refresh function or something ?
Thanks.
Regards,
Rajesh.Hello Rajesh
A quick view into the documentation of IMPORTING parameter I_CALLBACK_USER_COMMAND would have answered your question:
Within the USER_COMMAND callback routine set
REFRESH = 'X'. " That's all
EXIT routine for command handling
Description
Passing an EXIT routine indicates to the ALV that the application wants
to respond to certain function codes.
Generally, these are function codes that are unknown to the ALV (that
is, are not standard ALV functions) and that were defined and set by a
user status.
See also the documentation on parameter I_CALLBACK_PF_STATUS_SET.
The interface of the form routine specified must be defined as follows:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Parameter R_UCOMM contains the function code triggered.
Structure RS_SELFIELD contains the following information:
o tabname : Name of the internal output table
o tabindex : Index of the internal output table
o fieldname: Field name
o endsum : Cursor is located on the totals line
o sumindex : If >0, the cursor is located on a subtotals line
o value : Value of the field on the list
o refresh : (Exporting) List should be set up again
o col_stable:(Exporting) Keep column position when list is set up
again
o row_stable:(Exporting) Keep row position when list is set up again
o exit :(Exporting) Exit list (and ALV)
o before_action: Call before standard action execution
o after_action : Call after standard action execution, before list
setup
o ignore_multi : Internal use
o sel_tab_field: Internal use
The EXIT routine is called whenever a function unknown to the ALV is
triggered or if the routine call before/after the execution of a
standard function code has been defined by interface parameter
IT_EVENT_EXIT.
See also the documentation on parameter IT_EVENT_EXIT.
The function code and the current cursor position are then passed on to
the calling program through the EXIT routine.
If the user has selected multiple rows by selecting checkboxes, the
output table field designated as the checkbox contains the current state
of the checkbox in the list.
Regards
Uwe -
Filtering records with deletion flag in Query report
Dear Friends,
We are using ECC6.00 (EHP4) for one of our QM requirement, i have created a query in SQ01 with the tables QMEL,AUFK,AFKO,QMFE etc., to get the details of production order and notification.
The report will list out the production scheduler wise, order wise, defect wise quantity with the notification number also in the display.
For notifications which are created wrongly, the users set deletion flag. The same i.e., notifications with deletion flag should not appear in the report and hence i have called the field and filtered the value in the output (i.e., field value not equal to X where X is for deletion flag set records).
Everything works fine upto this, but when users (to carry out analysis) send the data to the spread sheet, the filter values are removed and all records are populated in the excel sheet (even records with deletion flag).
To select and display only records without deletion flag, i want to introduce coding in the query. Kindly tell me whether this is possible, if so where and what code should be written to meet my requirement.
The records with the deletion flag (notifications) should be eliminated from the selection and display.
Experts help required.
Regards,
M.MDear Raymond Giuseppi,
Thank you for your reply. The code syntax had been corrected based on your information. Unfortunately the code doesn't filter the records. On further investigation , it was observed that the field KZLOESCH doesn't get updated and hence a field had been created in the infoset wherein the following coding is written
clear : w_dlfl.
data : w_inact type char1.
select single inact into w_inact from jest
where objnr = qmel-objnr
and stat = 'I0076'
and inact ne 'X'.
if sy-subrc = 0 .
w_dlfl = 'X'.
else.
w_dlfl = ''.
endif.
The field name is W_dlfl.
In the above condition how and where should i include the code given by you. Since the field KZLOESCH is not updated how should we get the data from the field w_dlfl be exempted from selection?
Kindly provide solution.
Regards,
M.M -
Select statement from a join file deletes the primary records with MS Expl.
Hello,
is reality,
Select statement from a join file deletes the primary records with MS Explorer 6, Firefox not, this with a normal data provider or with a normal "select..." statement.
This is very strange, I should have a.a.s.p. a solution or workaround
Thanks, Franco.
Message was edited by:
fbiaggiPlease see the following excerpt from the online documentation.
http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_modes.htm#SUTIL1332
Enabled Constraints
During a direct path load, the constraints that remain enabled are as follows:
NOT NULL
UNIQUE
PRIMARY KEY (unique-constraints on not-null columns)
NOT NULL constraints are checked at column array build time. Any row that violates the NOT NULL constraint is rejected.
Even though UNIQUE constraints remain enabled during direct path loads, any rows that violate those constraints are loaded anyway (this is different than in conventional path in which such rows would be rejected). When indexes are rebuilt at the end of the direct path load, UNIQUE constraints are verified and if a violation is detected, then the index will be left in an Index Unusable state. See "Indexes Left in an Unusable State". -
Deleting records based on date with timestamp
Hi there,
In continuation from my earlier Query. Multiple reccord have inadvertantly been inserted in the LOAN_TXN table. I want to delete all the records, except one, based on date with timestamp.
CREATE TABLE LOAN_TXN
TXN_DATE DATE,
BALANCE NUMBER(10,2),
CODE VARCHAR2(1),
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '02/15/2010 11:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'), 250000, 'D');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2010 11:59:59 AM', 'MM/DD/YYYY HH:MI:SS AM'), 250000, 'B');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '05/14/2010 11:25:00 AM', 'MM/DD/YYYY HH:MI:SS AM'), 500000, 'D');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '06/30/2010 12:15:00 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '08/02/2010 10:45:26 AM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '09/08/2010 02:10:17 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '10/27/2010 04:25:20 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '11/09/2010 10:15:55 AM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '12/29/2010 03:10:20 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '01/12/2011 01:11:15 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '02/11/2011 12:11:48 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2011 11:59:59 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2011 11:59:59 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2011 11:59:59 PM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2011 11:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM'), 4000, 'R');
INSERT INTO LOAN_TXN ( TXN_DATE, BALANCE, CODE) VALUES (TO_Date( '03/31/2011 11:59:59 AM', 'MM/DD/YYYY HH:MI:SS AM'), 460000, 'B');I want to delete mutiple records, except one, with code 'R' and TXN_DATE = '03/31/2011 11:59:59 PM' How do I do that ?user3308033 wrote:
I think your query would delete all the duplicate records. Keeping one, I just want to delete mutiple records with timestamp : 11:59:59.
DELETE FROM loan_txn
WHERE rowid != (
SELECT MIN(rowid)
FROM loan_txn
WHERE txn_date = TO_DATE('03/31/2011 11:59:59 PM','MM/DD/YYYY HH:MI:SS AM')
AND code = 'R'
AND txn_date = TO_DATE('03/31/2011 11:59:59 PM','MM/DD/YYYY HH:MI:SS AM')
AND code = 'R'
/SY. -
Delete multiple records with MDM WebService
Hi everyone!
I'm using an MDM Web Service with delete functionality. It identifies records to be deleted either by internal ID or by defined field value. The point is that i need this web service to delete all records with one specific value in specific field (lets say all the records with value "hidden" in field "VISIBILITY").
But when I try to map value "hidden" of the field "VISIBILITY" to the web service input in BPM it says in tracing that there are multiple fields with that value in the table (certainly there are) and that it can't process them. Cause it doesn't support multiple processing. Is there any way to do that?
Thanks in advance,
PeterHi Peter,
I guess you can do that if you first retrieve the internalIDs of the to be deleted records:
Do a search for the records with the field value.
Then you will receive the internalIds of them.
Then you can put these internalIds to the delete records webservice. Each in a new element of the record identification.
I hope this helps!
Best regards,
Stefan Brauneis -
Deleting parent record with child instances
Is there a way i can delete records from the database when i have one of the columns being used in other tables.
Eg: m_id used in tables meter ( Primary key ) and period_meter( foreign key) and site_area_meter (foreign key). I want to delete record whose m_id is so and so...
if not then any other idea to discard that parent , child records
thanks in advanceI was able to solve my problem by using the item tag to the Navigate Tree: Get Parent invoke node and then wiring through the item to the next item tag as needed.
I attached a screen shot.
Kenny
Kenny
Attachments:
get items from tree control.gif 4 KB
Maybe you are looking for
-
IPad not recognized by Windows 7 PC
How do I get the iPad to be recognized by my Windows 7 PC? The Apple Mobile Device Driver is installed and reported as working properly. iTunes is an updated install, but iTunes will not recognize the iPad. Reports iPad has been detected, but coul
-
Not able to ssh from one EC2 instance to another
I was trying to work with Oracle AMIs on Amazon cloud (EC2 instances). 1) Created 2 EC2 instances of an Oracle database AMI ( based on Oracle Enterprise Linux (OEL) 5) 2) I have opened ports in my security group associated with these EC2 instances. i
-
How do i get backup password if i forgot
how can i reset my backup password
-
Unusually long bootup followed by blue screen
So last night I decided to restart my MBP then when it came back to bootup, I got a gray screen with the broken file/folder icon. So I ran disk utility and repaired everything, one minor repair was made. Now when I try to bootup, the apple screen tak
-
My N95 is not working as i accidently d/ced the us...
My N95 went dead after i accidently disconnected the USB while upgrading the firmware. Now the screen shows a faint nokia logo when i try turning it on. does anyone know how i can get my phone working again?