Transporting problem gui_status to live system

Hi gurus,
I have a problem transporting  gui status to live system.In development system area(se80),I see the gui_status folder but when I'm transporting the all program to live system,gui_status is missing.Can I get request only for this gui_status?I checked the codes between development area and live system,both of them same.And also in development system, the program works fine.but in live system I get in program and can not quit as you guess..Could it be for settings in live system or should I create a new gui_status in live system?
Thanks and regards,
ZCN.
Edited by: ozcandemirbilek on Mar 8, 2011 1:08 PM

Hi,
It seems that gui_status is missing because it might gets locked into other transport object which is not moved to the live system yet or it is saved as local object.
Check the gui_status object entry or check in tablle E071. in which TR this object is locked. If it is not locked in any TR. create new transport for this and moved to next system.

Similar Messages

  • Activate a transported rutine in customizing not allowed, live systems

    Hello,
    I am looking for any way to activate a trasported LIS (MC1B, MC1D) or copy control (VOFM) rutine from development to live system, without allowing customizing in live systems.
    Thanking you in advance.
    Kind regards,
    Nilüfer Çalışkan
    SD consultant

    When the requirement/Info structure is transported, it has to be activeted to take effect. To do this, run program <b>RV80HGEN</b> in the target system which will activate all requirements. This will add the requirement to program RV61BNNN (SAPLV61B => LV61BNNN).
    Else, the execution of program RV80HGEN can be included in the transport so that the program is run in the target system. To do this, edit the request in SE10.
    Select the request and press the Display Object List button. When in the object list, press Display <--> Change then New Entries. Add <b>R3TR XPRA RV80HGEN</b> to the object list: and Save.
    Next, transport the request normally. This would resolve your problem.
    Regards,
    Gauravjit.
    Reward points if the solution is helpful

  • Portal not picking up the changes when I transport to live system

    Hi All,
    I created a report by using report designer in dev. system when I run the report it is picking up the changes in the portal but when i transport the report to live still i can see the changes i made in the report in report designer but when i run the report it is giving me the same old version of the output instead of new changes.
    Could any one help....please

    Hi
    Open the workbook
    Place your mouse on the result area and right click...there one window will open ....in the properties...go to Interaction tab...and tick mark..third option refresh query when opening workbook
    Save the workbook
    Again change the query and see your change is saved in the workbook
    Assign points if useful
    Thanks
    N Ganesh

  • Transport Reuest import error in BW Live System

    Hi,
      I raised a transport request in BW Development system for the changes i made to the queries that are already avaliable in Live system.
      I imported the request with out error in Quality System and the queries in Quality are updated with the changes i made.
      When i import the same request to Live system it is failed with error RC 8.
      When i checked the queries one query is updated with the changes i made in Dev system and other is not updated
    Error Msg:
    Object ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported successfully
    Diagnosis
    The object R3TR ELEM 8HV3QPKGUZL61GQH00KRI7369 has not yet been imported without error.
    System Response
    Import post-processing is not performed for this object.
    Procedure
    Examine the import log for this transport request for error messages.
    Repeat the import after removing the cause of the errors.
    Please update me how to proceed
    Thanks

    One of the query elements (e.g. Calculated Key Figure, Variable, et. al.) was not captured on your transport and has never been imported into your target environment.
    In your development system, go to SE16 and query on table RSZELTDIR to determine which query element the thrown issue is referring to. Use the following parameters for your query:
    ELTUID (ID) = 8HV3QPKGUZL61GQH00KRI7369
    OBJVERS (Varsion) = A
    The MAPNAME (Query) column will give you the name of the query element that you'll need to put on a transport and move through to your target environment.

  • Error when transporting Webservice from our DEV system to QA system

    Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service.  This was created in our 030 client of DEV.  I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice.  I then transported the webservice to our DEV 200 client and all worked well.  Next I transported both to our QA box, first the vi/Service transport then the webservice transport.  This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign.  Is there a trick to transporting this webservice to different systems?
    I def award points for helpful answers
    Cheers
    Devlin

    hi,
    I had this problem once and in my case the service wasn't activated in SICF.
    so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
    anton

  • How to upgrade (with clean install) a OEL4 server to OL5 on a live system

    My problem is that I cannot find any meaningful information on how to perform a OL upgrade on a live system with a running database.
    The system is running OEL 4.9 (migrated from RHEL 4 to OEL) and I want to upgrade it to OL 5.7 (wanted to use 6.1 but that is not yet certified for 11.2)
    I know that using Anaconda's upgrade is not supported so I guess I will have to use a clean install. (the system is full of legacy rpm's and old drivers that where needed in previous 4.x releases and dependencies that I wouldn't want to upgrade).
    So I want to do a clean install of 5.7 on the server, but what is the process? There are 3 LVs running 1 for the OS (with partitions for /, /boot, /tmp, /usr, /var and /home )
    1 for the Oracle software / data files and 1 for exports / archive logs and such.
    If I do a clean install on the OS LV (after taking a backup of everything) will I be able to reuse the existing setup of Oracle software on the 2nd logical volume? create the oracle user with the same uid/gid, running root.sh, etc.. Will it start and be able to mount/open the database ? (I am assuming the need to rebuild the installation) There is also a home for 11.2 middleware web-tier utilities (for APEX).
    I have been searching in vain for some guides / insight into what the correct procedures are for upgrading the OEL4 to OL5 (or OL6 if it gets certified in the next few months).
    Any help appreciated.
    Oli

    My problem is that I cannot find any meaningful information on how to perform a OL upgrade on a live system with a running database.Firstly, it is good to know your system is running satisfactorily.
    After taking a full backup (and checking that the backup is good!), you must shutdown the RDBMS instances.
    1) Reboot from the distribution media.
    2) Choose a full install; you do not want to upgrade.
    3) Be very careful to click on the checkbox to "use custom setup" so that you will get a display of the current storage setup.
    4) In the Anaconda Disk Druid screen, edit the displayed LVMs to use their old mount points.
    5) Make absolutely certain that the checkbox to reformat the LVMs for your database setup are clear, not checked.
    6) Do install the default RPM package selection; the OL distro is configured to install the necessary prerequisites for an RDBMS setup.
    7) After the installation completes, be sure to install the "oracle-validated" RPM package to do the necessary tuning.
    8) Add back all the user accounts.
    9) Move on to bringing up the RDBMS.
    Looks scary, and is, but can be done. Practice installing this way before doing it for real -- you do want to be familiar with each installation step and to realize where you are along the process.

  • Workflow rule transporting problem

    Hi,
      When i am trying to transport rule to from dev system to client system it is not getting copied can any body tell how to copy the rule data from dev to c system

    Hi!!!
    Thanks for ur prompt helps. Actually instead of OBJECTID I was passing the Obj-key and not the OBJECTID. This was creating problem. But still dont know why it was creating the prob.
    Anyways THANKS A LOT.
    Regards,
    Sudipto.

  • Data Source Transport Problem

    Hi,
    I am trying to transport some BW Objects ( InfoCubes, IO, DTPs, Transformations, Datasources) from my SAP Bw Dev system to some other SAP BW dev system E15 010.
    All the Objects have been correctly transported but the DataSources as well as the connected Transformations are not getting transported.
    Following error is coming:
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Aktivierungsmodus)
    No rule exists
    Source RSDS 0TCT_DS02 T15CLNT100 does not exist
    No rule exists
    Please give me ideas how to solve this problem..
    Thanks and regards
    Pradeep

    Hi Pradeep,
    The datasource & transformations are dependent on the source system. Can you please confirm if this target BW system is connected with the source R/3 system where active datasource exist.
    If this target BW system is connected with some other R/3 system, can you please confirm that before transporting BI requests from one system to other, did you transport transport requests from source R/3 system to target R/3 system.

  • Original System incorrect after transporting from BD1 to BQ1 systems

    Hi all,
    BI 7.0 SP 10
    We have having problems with the 'original system' of our DataSources and certain transformations when transporting objects from BI dev system to the BI QA system.
    DataTargets are coming through the Transports with the correct 'original system' name but for DataSources and Transformations that are used to map from the DataSource to the DataTargets are incorrect.
    We have ensured in our 'Conversion of logical system name' has:
    - ID1 -> IQ1
    - CD1 -> CQ1
    - BD1 -> BQ1 (we were once missing this but this has been added and transported retransported but still it doens't seem to work)
    Could it be becauce we accidently activated the DataSources from IQ1 and replicated these in BQ1 and the Transports of the DataSources are not overwriting properly? I would have assumed that the Transports (with overwrite) option would overwrite the existing DataSources and replace it with those from the Dev system.
    As for the Transformation, could that be due to the incorrect orginal system setting of the DataSource which in turn is causing issues to the Transformation attached?
    Any ideas?
    Thanks,
    Wiki

    Hello,
    Goto RSA! -> Tool-> conversion of logicalsystem names
    Maintain the entries.
    SPRO also we can maintain same entries under transportconnection
    hope it helps,
    Kishore

  • How to import transport of copies to productive systems

    Hello,
    I have been experiencing a problem that even the guys from admin could not solve (yet). I should say I work in a development team.
    Imagine you have two landscapes, one DEV-QAS(1) to develop big projects and a normal DEV-QAS-PRD(2) landscape where my objects will be imported. After a new group of objects is finished in (1), we ask to import the workbench request in the STMS queue of DEV(2). After this, and after some small test, we create a transport of copies in DEV(2) where we include the first transport, release it and import it to the QAS(2) queue. After the tests in QAS(2) the idea would be to import the transport of copies to productive system PRD(2). But it does not work...
    In STMS queue for PRD(2), there is no entry for the transport of copies. Also, when I tried to add the transport request to the import queue (via menu -> Extras -> Other requests -> Add), I get an error message stating that no co-files where found for the transport.
    Does anyone know this problem? I suspect it can have sothing to do with the use of a transport of copies, but, if I don't use this kind of transport, how can I get objects from other systems to production?
    Thanks in advance.
    Davide Sepanas, Portugal

    Davide,
    Re your latest questions:
    > 1) Why this problem with transport of copies doesn't happen from DEV(2) to QAS(2), since these systems are also not in the same transport directory?
    >
    I think the answer is in your original problem description:
    we create a transport of copies in DEV(2) where we include the first transport
    >
    When you create a transport of copies you must indicate a terget system and I suppose you enter QAS(2) there. In that case the TMS will add the request to the import buffer of the target system when you export the request from DEV(2). I understand that you never have to add transports of copies to the import buffer of QAS(2) manually, which proves the TMS does this for you. However, for further imports into systems that are not designated as target system of the transport of copies, like PRD(2), the TMS will do nothing of the sort and you must add the request to the queue yourself - which in your case also means you have to forward the transport files first.
    > Can we assume, then, that, where I was working before, all three systems were configured in the same transport directory, avoiding thus the problem with the transport of copies requests?
    Yes, and that is the most common way of setting up the transport system. Having separate transport systems really only makes sense when sharing the transport directory between the dev, qas and prd systems (via NFS for UNIX, via network shares for Windows) is not possible, either because there is no local network between the servers or because some security policy forbids it. I'd advise you to certainly ask the question to your system admin.
    Regards,
    Mark

  • Transformation transport problems when containing routine

    Hi Gurus,
    I'm facing a transport problem.
    When i want to transport a transformation that contains routines, the transport says syntax error in routine. The routine in DEV is tested and correct. I realised, that the transport does not bring the routines. After transport, i open the transformation, and the routines contain the default routine: RESULT = .
    I found some answers in some posts, but no exact answer how can i get rid of this transport problem. I don't like copy - paste into prod system with manually editing....
    If you have any idea, please let me know.
    Thanks
    Laszlo

    Thanks for your help, it worked now, but i think it should work without owerwrite originals. Sometimes it seems that the routines is not included in the transport request, when i modify a routine in a transformation.
    But thanks anyway, problem solved now

  • XI Configuration objects Transport problem

    Hi Experts,
      Interface determination and Receiver Agreement in Receiver determination has to be configured every time when we move our transports from DEV to QA and QA to production ?
    Regards,
    Vikram

    Let me assue you that I have never made any changes manually on my Dev Box Ever.
    1.If you create the Transport Targets for your Business Systems correctly such that all Source Business Systems are mapped to a Target Business System and
    2. All the Target Business Systems belong to a Single Transport Group pointing to your QA / Prod Integration Server, things work like a charm.
    As you do not have details, it would be very difficult to point fingers on what the issue was, but normally the problem is due to either of the above 2 not being done correct,.
    Regards
    Bhavesh

  • How will you generate the work schedule in live system

    How will you generate the live system
    Appreciate for sppedy answer

    Your live system must be open for table changes if you want to generate your work schedule rules - this will need to be done by your basis team.
    Usually, work schedule rules are generated in development and transported through to production.  The generation is performed by using program RPTSHF00 (or transaction code OG00).  You generate as a batch with the 'BTCI = ''/online, ='A' or 'E'"field set to E.  This will save the generation to a transport.  If you have a lot of work schedule rules, you may need to split the generation over more than one transport.
    Regards

  • Transport Problem  - flow from one DSO to another DSO.

    Hi all experts,
    I am loading one DSO from program.  And based on first DSO, I am loading second DSO.
    In other words, second DSO is getting loaded from first one.
    While transporting from dev to quality system do i need to activate and include info-source of first DSO in the request ?
    <b>or</b>
    mere activation of both DSOs and update rules will be sufficient ?
    Waiting for your reply..
    Regards
    Vinay

    Thanks Patric.
    I am facing one problem.
    In one single request I have included two DSOs. ( One DSO is loading second DSO. ) Also I have included Info-source (generated from first DSO, commn structure and transfer structure).
    I also activated the update rules. But transport is getting failed showing error as below
    Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
    Update rules {tech name of update rules} read in version M
    Error when activating update rule {tech name of update rules}
    Activation of the update rules for {second dso} { 8first dso }
    IC={second dso} IS={ 8first dso } error when checking the update rules
    Can you help in this issue ?
    Regards
    Vinay

  • Open Hub transporting problems

    Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've looked at all the SAP Notes, but they reffer to the earlier patch levels...
    And other problem, is that it's OK in DEV system but in QUALITY system, when you launch a DTP it gives us a dumb with ASSIGN_TYPE_ERROR
    Any ideas??

    My destination path on the DEV box is simply the following (identified by BID in the following path):
          D:\usr\sap\BID\DVEBMGS00\work
    And when I locate the un-activated open hub on the QA box, the BID is already changed to BIQ, but the server name box/field is empty....
    I am going to try with the object changebility option, btw, is there any documentation on how to change these objects that are marked with object changebility on the QA box (provided that we can not manually change anything on the QA box)...
    Anyways, I think my problem is with the server name conversion from "abc-bi-dev" to "abc-bi-qa"....!!!
    Also, please note the RSBFILE entry for this object in the QA box has the "btcsrvname" as blank...
    Do you think there is any additional setting that needs to be done on the QA box to do this translation (from "abc-bi-dev" to "abc-bi-qa")?
    The only two setup we have done as far as the BI is concerned is at the "Tools-> Conversion of logical system name"....where you only put the conversion for client name mapping from dev to qa and local file system mapping from dev to qa.
    So, is there anything else to map the host name (from "abc-bi-dev" to "abc-bi-qa") either at BI perspective or Basis/NetWeaver perspective?
    Thanks a lot...
    ~Sabuj.
    Edited by: Sabuj Haque on Feb 1, 2009 1:11 PM
    Edited by: Sabuj Haque on Feb 1, 2009 5:34 PM

Maybe you are looking for