Transports across clients on same SID

I have a request from the SAP project consultants to set up automatic transports from client 203 to 204 on my development system.
I was given a script that the basis consultant had written to do this on a windows platform (he does not have iSeries background) but the script seems to refer to a different SID and at this time I cannot get clarification from them on this.
The question is what ways can one do a automatic transports from 1 client to another on the same system on an iSeries?
The consultants are complaining about using SCC1.
Anette

Hi Anette,
I would say: Both ways: Importing or SCC1 are useful ways ...
The automatic transport - should it happen "immediately" or e.g. all 15 minutes ?
I would normally suggest to NOT use automatic transports but to always use "import all" in DEV.
Why ?
Because the 15 minutes (in average 7.5) are too long for me => I would impoirt manually anyway - but why then all 15 minutes ?
=> I would setup the STMS with transport groups e.g. as follows:
DEV => /QA/ => PRD
/QA/ consists of:
DEV.203
DEV.203
QAS.100 etc.
You could even split /QA/ into a "/DEV-QA/" and a real "/QA/" if you prefer that.
Then all release of transports puts it automatically into the buffers and then they cna import themselves or you could automate it via STMS e.g. all 15 minutes (you should check this with your IFS backup during night).
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

  • Two portals (same SID), one R/3 System - changing portal client number?

    We have one R/3 system but two portals.  One is EP6, the other is EP7 and is due to replace EP6.  On installation of version 7.0 we had to keep the SID the same on both portals.
    Now we are having trouble with SSO into R/3 as the ACL in STRUSTSSO2 will only accept one unique SID with client number of 000.  However it does seem to accept the same SID but different client number.
    My question is, is there a way to change one portal generating the verify.der certificate using something other than default 000 client number?
    Is this messy?
    thanks.
    SiB

    Hi Simon,
    > is there a way to change one portal generating the verify.der certificate using
    > something other than default 000 client number
    > Is this messy?
    There is a way and it is absolutely not messy but the supported way; you just have to set the UME property "login.ticket_client" to some different value than "000" on the portal server in question (and of course you have to use this value on the ACL in the SSO target system).
    Also see https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/singleSign-Onand+Cookies& -- checklist number 3 and http://help.sap.com/saphelp_nw04/helpdata/en/e2/f71940d4558f5ce10000000a155106/frameset.htm
    I have just done this on my actual project, it's quite straight forward. Remember to restart the portal WAS after changing the value!
    Hope it helps
    Detlev

  • Same SID for QA & Prd systems - pros and cons?

    We have the foll systems:
    1. Enterprise Portal 7.0
    2. NWDI 7.0
    3. NW 7.0 (with XECO - Ecommerce)
    4. TREX 7.1
    5. Content Server 6.40
    6. ECC 6.0
    Currently the QA and Prd systems have the same SID and system/instance no, although they are on different hosts.
    We would like to know what are the long term pros and cons for keeping the QA and Prd SIDs the same for all systems.
    We are already making a list, so thought we might as well get more inputs from the community too.
    We already have this arrangement for the past 3 months and have not faced any major issues.
    A couple of cons though:
    1. Cannot use solman as it cannot distinguish between the diff servers with same SID
    2. ABAP transports from QA to Prd have to be manually done (cannot use STMS)
    Thanks
    Prasad

    Hi Manoj,
    Changing the SID of java systems is a very tedious procedure. Hom sys copy is just a part of the SID change...there are a whole lot of configs to be done after that...the task is eq to a new setup of systems
    For once, the efforts put in are huge..you can see there are 5 systems..besides, it will involve coordination from all teams - basis, development, functional, project management.
    Here are a few advantages that we know of:
    1. No efforts reqd to change back to original SID
    2. During disaster recovery, we just have to restore the production database on QA and change the hostname, whereas its not so in case of having diff SIDs
    3. For end-users this will be transparent because they will be using the hostname in the URL which is anyways different
    We have the same SIDs for the past 3 months and have not seen major issues, but we also would like to know from the long term perspective if there are any risks that we have not foreseen...hence we seek help from the community.
    Hope its clear now
    Thanks for your response
    Prasad

  • Same SID two host name

    Hi,
    I have some problem connecting to database. I want to connect to 9i database from 8i client. Database has two host names(logical partition) sharing one SID (one IP). I have configured host and tnsnames.ora for two hostnames but both connect to same instance. How this can be solved?
    Thanks
    vg

    Hi,
    By registering a developer in service market place we will get a developer key. So it is depends on the customer number in SAP and the SID you are using when you are applying for the license in Market place.
    If you use same SID with the same customer number you can use the same developer key for two different installations.
    Thanks,
    Ven

  • Create a Connection on TREX for 2 systems with same SID

    Hello world,
    Here is my case,
    We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX
    now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one that i have already made
    So is it possible to create 2 connection of same SID but diffrent Hosts In parallel?
    If Yes how ?
    Thanks In Advance...
    Ahmed Salam

    Hi Ahmed,
    it could be possible from the TREX perspective , however such configuration isn't supported . The reason for this is that the SAP applications create indexes using the ABAP system ID and client as a part of the index names (f.e. esh:e10002~e10002~acc_sid~sid). As it's not possible to create an index with the same name 2nd time, you will not be able to use the TREX instance with two systems with same SID.
    Best regards,
    Mikhail

  • Two database with the same sid but different ORACLE_HOME on one host

    two database with the same sid but different
    ORACLE_HOME on one host,and if configure them with
    two differnt lisnter staticaclly,this abosultely work
    because in the lisnter.ora we must provice
    ORACLE_HOME variable,with this ORACLE_HOME the client
    can differentiate which database to connect,but if
    use dynamically register feature,how can the client
    tell which database to connect?

    Also note that this type of configurtion may not be supported.
    Just because a given configuration works in certain given conditions does not mean that it would be supported.
    If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

  • Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

    Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on same NT box.
    1) I attempted to install 8.1.6 client first in c:\oracle\ora81, then Forms 6 in c:\oracle\forms6. The installer (3.3.1.2.4) errors, saying forms 6 does not support a multi-home installation.
    2) Attmpted to install Forms 6 first in c:\orant. Then installed 8.1.6 client in c:\oracle\ora81. After beginning installation (application user) the following Dependency message displays and the installation is canceled: "Installation cannot continue for the follwoing reason(s). [Oracle ODBC Driver is a single Oracle home product. It is already installed in location c:\oracle\ora81. Oracle provider for OLE DB is a single oracle home product. It is already installed in location c:\oracle\ora81. Oracle objects for OLE is a .... Pracle Provider for OLE is a single home ... You can either de-install these products or install the products in the same location as the single home products."
    Click ok and the installation cancels.
    How do I install these two products on the same box?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    We had to upgrade from 7.3.2 to 7.3.4 when we moved over to Forms
    6.0.5.0.2 and it's working fine.
    We are using Net 8 as well.
    Finn Ellebaek Nielsen (ChangeGroup ApS) (guest) wrote:
    : I have problems with Forms 6.0.5.0.2 running against an Oracle
    : 7.3.4 with Net8. When trying to insert or update records I get
    : an FRM-40508: ORACLE error: unable to INSERT record/FRM-40509:
    : ORACLE error: unable to UPDATE record. The Help | Display Error
    : menu item shows statement = "S3AVWU3wo|$6o|" (garbled
    : message), error = "ORA-12663: Services required by client not
    : available on the server" (sometimes it's "ORA-01403: no data
    : found").
    : It works fine against 8.0.5. As far as I'm aware Forms 6 is
    : certified against 7.3.4?
    : Any clues?
    : Thanks for your help.
    : Finn
    null

  • What issues we may face in installing a new Prod portal with same SID as existing one

    Hello All -
    We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
    We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
    Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
    1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
    2) Can't add two hosts with same name in DNS Server
    3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

    You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
    After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
    Then make sure to restart the gateway and server.
    HTH ..

  • Mac mini server how many clients serve same time

    mac mini server[lion server] how many clients serve same time, the web server, suppose only traffic the web server?
    macs/PCs with server OSs designed for work as normal, but more mainly for left on, connected and serve clients on the internet eg web server, mail server? T/F

    Thanks for your help. I actually forgot that I posted this and when I saw the email telling me you sent a repsonse I then did another search (using a different phrase) and I found this:
    https://discussions.apple.com/thread/4554036?start=0&tstart=0
    I think that is saying that I can do what I am asking.

  • Adding systems with same SID in SMSY - solution manager

    Dear All,
    We are having systems with same SID's which  belongs to different landscape created for various customers.
    Currently We are having only one solution manager.
    I consider this example for explanation.
    Customer 1 : DEV --> QAS --> PRD ( SID's)
    customer 2 :  DEV --> ACC --> PRD  ( SID's)
    I would like to add  these 6 systems in a solution manager. For Customer 1 , I have included the systems in SMSY . But when i tries to add DEV, PRD for customer 2 , it fails  since this SID's are already present.
    Is there any other way to include by giving the different SID's DE2 but with correct IP and host Or we need to have one more solution manager ? Please anyone suggest me on this
    Thanks
    Raj

    Dear Juan ,
       We can add systems with same SID in smsy. I have attached the way in which i have done. This may help others. Thank you all for your suggestion
    Only use more than three characters if your landscape contains multiple systems with the same system ID (if you have a mirrored backup system that has the same ID as the original system, for example).
    If multiple systems in your landscape have the same system ID, choose as system name the system ID with a suffix of up to 5 characters (a sequential number, for example) to create a unique system name.
    The system accepts a system name of more than 3 characters if you choose Enter to confirm.
    Thanks
    Raj

  • Decentralized/Standalone XI Adapter Engine in same SID as Central AE

    For reasons of splitting functionality, we want to setup separate XI adapter engines (AE) so that we can "pin" certain communication channels to specific AE.
    On top of the "Central" AE (installed in /usr/sap/<SID>/DVEBMGS39), I have now installed a second ABAP/J2EE dialog instance (in /usr/sap/<SID>/D89).
    All the Java components and services are visibile in VisualAdmin.
    D89 shows up in SLD, and the J2EE SLD Data Supplier in D89 works.
    However, there seems to be no "separation" of the 2 instances of the AE:
    In RWB, component monitoring, there are no entries under "Non Central Adapter Engine" (although it is visible as a second node in Adapter Monitoring/MDT)
    In IB/DIRECTORY, only the "Integration Server" is visible as an "Adapter Engine" in the communication channels
    In the SLD, the class "HTTP Service Port: Basic URLs of Adapter Engine on <hostname>" only shows 1 URL (pointing to D89 and not to the "central" DVEBMGS39l).
    To me it seems the 2 J2EE instances (within the same SID) behave as 1 (just like if we added another server1 to the same J2EE instance).
    I think the main problem is within the data of the SLD. Does the separate "Adapter Engine" need to be registred manually (for example by creating an additionale instance of the CIM class "SAP_XIAdapterFramework" ?
    System has been restarted many times.
    Has anybody setup a separate adapter engine this way ?
    Thanks for your help
    Kind regards,
    Jan Van Achte

    Dear Jan
    did you find a solution for your problem ? i got the same problem and did still not find a solution in sapnet.
    regards peter

  • SAP BW 7.4 on MS SQL- With ABAP & JAVA Stack as same SID

    Dears,
    If you have any experience or idea for SAP NetWeaver Business Warehouse 7.4 installation on MS SQL or Oracle Database with ABAP Stack and Java Stack as same SID.
    Kindly help for this possibility.
    Regards,
    Sri

    Hi Experts,
    Great for viewers.
    But still expecting some ideas above questions kindly answer.
    Also i got some important points.
    Java Stack for BW on HANA
    At least any one answer the purpose of BW Java Stack.
    Regards,
    V Srinivasan

  • I Ask About WCS count Client not same WLC

    WCS  count Client not same WLC   as on WLC count client  = 100
    on WCS count = 23-23  
     Wireless Control System  Version 5.2.148.0
     WLC  7.0.250.0
    http://postimg.org/image/9boldeqd5/
    http://postimg.org/image/l482i9poz/

    Your WCS should have a higher (or not equal) version to your WLC.  
    I wouldn't even consider troubleshooting WCS problems if your WCS is running 5.X because WCS/WLC firmwares 5.X are very, very buggy.

  • Sending message across clients

    Hello,
    wanted to know how to send message across clients. Suppose I have 2 XI servers : one is XI other is PI. I want to send message from PI to XI. how will we configure this scenario? what adapters will be used and what is the message flow ?
    Thank you.

    Hi,
    Check my thread it may be helpful
    XI adapter
    Regards,
    Prakash

  • 2 clients of 1 apo system connecting to 2 clients in same ECC system

    Hi
    We have a requirement at our end as below-
    1)We have 2 clients in our APO Developement system and they are using BW functionality of APO
    2)These 2 clients need to talk to 2 different client in our ECC System for ex:- APD has 2 clients(100 & 200) and ECC has two clients(101 and 201).
    We need APD 100 to talk to ECC client 101 and APD client 200 talking to ECC client 201.
    The query is - Is this possible to do the same .
    If yes,can anyone guide me with some required documents

    Hi sunny
    One more query  :-
    The scenario is we want to connect 2 APO systems to 2 different clients of same ECC box
    For Ex:-
    ECC 100 ---> APD100
    ECC 200 ---> APT200
    There is only 1 ECC box with 2 clients.
    I am not sure if we have some restrictions with regards to BW of APO connecting to 1 ECC box.
    Do you have any idea if there are some issues while doing it as we will have 2 APO-BW client talking to 2 clients in ECC
    Thanksbasisadmin

Maybe you are looking for

  • 0DOC_NUMBER - Sales Order No - Attributes

    Hi Guys, Here is my requirement. I need sales order related characteristics like soldto, shipto, endcustomer,purchase order date and some line item level fields  like few dates and status flags. I am planning to add all the above as the attributes of

  • Changing "normal size" for QT file?

    I am not sure what this is but I guess it is the default size of the movie when it opens. Is there a way to change this value for a movie? I have looked at the AppleScript dictionary, but cannot see it listed.

  • Correlation set problem with different messages

    Hi. I have process with two receive activity correlated by correlation set. But second receive wait for different message as initiation receive. I created correlation set <correlationSets> <correlationSet name="OrderCorrelationSet" properties="ns1:or

  • Hi,getting an error-ORA-01436: CONNECT BY loop in user data

    hi,i am getting an error while running the select query SELECT callreleasetime,calleventduration FROM temp_med_partial_records_0001 CONNECT BY PRIOR callreleasetime=callreleasetime AND PRIOR IMSI=IMSI AND PRIOR connectedcallingnumber=connectedcalling

  • What causes the dreaded black window?

    The dreaded black window ("You have to restart ...") started showing up on the eMac about 2 months ago, about the time I upgraded to OS 10.4.11. However, it also showed up when I ran Panther off another disk. I bought the iMac G5 and installed OS 10.