Trapping problem
I have Adobe CS4 Design Standard. I was using trap settings in Indesign. When we apply any trap preset (Default or self made) on any object or on all pages, Indesign goes quit and shows a dialogue box with message “"InDesign.exe has encountered a problem and needs to close. We are sorry for the inconvenience.” Let me know if any solution. Thanks in advance.
CS2
As I said in my original post It's a line of type...not a graphic.
We are visualizing the actual film where the error is evident.
The line of type that did not trap properly is the gold type to the left of the Mt Airy logo near the bottom of the ad. Instead of the yellow spreading into the black (as it should...light colors should spread into dark colors), the black spread into the yellow so when the job was printed the letters were almost unreadable (very thin).
Similar Messages
-
Trapping problems with spot colors
MAC 10.5.4 CS3
I have had two books present similar problems with one of our printers. Both books are 2 color. The first is 2 spot colors and the second is spot and black. The problem is that the traps are showing up as white. It looks like anything that is trapped has a white stoke applied. One book has headers using the spot ink for the text, in a black box. These are all getting the white outline around the text. The other book has the the darker spot for text overprinting screened boxes of the lighter spot. The overprinted text looks ok.
I had previously posted about the illustrations in the 2 spot book and have been able to take care of the issue regarding Transparency vs. postscript. But as we are still having this issue with some text and there is no transparency used I am wondering if there is some setting I can adjust to fix this.How is the trapping being applied? Did you set it yourself in InDesign?
I think the default for InDesign is to use an InRIP trapping. And I always thought that was not part of ID's setup.
Maybe I'm wrong. So let me know. -
hi all,
i am a fresh man in this deisgner.
Currently i facing a problem where the data fetching multiple values.
the query i capture from webi is like below
SELECT
FACT_SALES_ID.VALUE,
FACT_SALES_ID2.VALUE,
Derived_Table.PRODUCT
FROM
FACT_SALES_ID,
FACT_SALES_ID FACT_SALES_ID2,
Select FACT_SALES_ID.PRODUCT from FACT_SALES_ID GROUP BY FACT_SALES_ID.PRODUCT
) Derived_Table
WHERE
( Derived_Table.PRODUCT=FACT_SALES_ID.PRODUCT )
AND ( Derived_Table.PRODUCT=FACT_SALES_ID2.PRODUCT )
AND ( FACT_SALES_ID.TRX_MTHDATE <='2011-04-30') and (FACT_SALES_ID.TRX_MTHDATE > '2010-04-30' )
AND ( FACT_SALES_ID2.TRX_MTHDATE <='2010-04-30') and (FACT_SALES_ID2.TRX_MTHDATE > '2009-04-30' )
i doubt it is a fan trap. i have tried to understand the solution but still didnt work out.
any idea on it how to solve it in universe?
i really appreciate to any one who helps.
thanks alotFirst question:
What is the purpose of the derived table?
Second question:
What are your measures? There are no aggregates there so it's difficult to tell.
Third question:
What is the relationship between the tables used in the query? -
Hi
I'm using a 13 inch mid-2012 MacBook Pro with OS X 10.9.2
For some weeks the computer has been crashing at random points, usually with the screen getting glitchy and freezing. The only alternative is to power off and then power on. Normally it won't power until several attempts, as it makes a 3-beep alarm sound.
I took it to the Genius Bar, and they reinstalled everything but said they couldn't find any problems.
I don't always get an error report, but here's the latest one. Any help appreciated.
Thanks.
Anonymous UUID: EF348A75-DF56-3E94-F17E-1B75270BE3FF
Sun May 11 13:49:41 2014
panic(cpu 2 caller 0xffffff8024edbe7e): Kernel trap at 0xffffff7fa5beac4d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x000000005950b078, CR4: 0x00000000001606e0
RAX: 0x00000000e00002ea, RBX: 0xffffff802c66bc20, RCX: 0xffffff7fa5beac30, RDX: 0xffffff802c66bc20
RSP: 0xffffff802c66bb58, RBP: 0xffffff802c66bb90, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0xffffff8030271400, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000206
R12: 0xffffff7fa5befe40, R13: 0x0000000000000548, R14: 0xffffff8030271400, R15: 0xffffff802c66bc20
RFL: 0x0000000000010286, RIP: 0xffffff7fa5beac4d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff802c66b7e0 : 0xffffff8024e22fa9
0xffffff802c66b860 : 0xffffff8024edbe7e
0xffffff802c66ba30 : 0xffffff8024ef3376
0xffffff802c66ba50 : 0xffffff7fa5beac4d
0xffffff802c66bb90 : 0xffffff80252cdcad
0xffffff802c66bbf0 : 0xffffff80252cb85f
0xffffff802c66bd40 : 0xffffff8024eb65a8
0xffffff802c66be50 : 0xffffff8024e26bf1
0xffffff802c66be80 : 0xffffff8024e139f5
0xffffff802c66bef0 : 0xffffff8024e1e043
0xffffff802c66bf70 : 0xffffff8024ec97bd
0xffffff802c66bfb0 : 0xffffff8024ef3b96
Kernel Extensions in backtrace:
com.apple.iokit.IOSurface(91.0)[BC96A900-DD9D-3F36-AFE6-EF88CB4B3607]@0xffffff7 fa5be5000->0xffffff7fa5bf6fff
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13C1021
Kernel version:
Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
Kernel UUID: E9CF78E2-1E9F-3B6F-81A4-FEE6C6D0E4D5
Kernel slide: 0x0000000024c00000
Kernel text base: 0xffffff8024e00000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 637730434763
last loaded kext at 260391397405: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa6cc2000, size 65536)
last unloaded kext at 322441694741: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa6cc2000, size 57344)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.15
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.0f1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelHD4000Graphics 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelFramebufferCapri 8.2.4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBXHCI 670.4.0
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 91
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.iokit.IOAcceleratorFamily2 98.14
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384A54463235363634485A2D3147364D3120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Three beeps on start-up usually means that you have bad RAM. If you're still under warranty, I would take the machine back to the Apple Store, along with a copy of your kernel panic log, and have them test the RAM (you can actually test the RAM yourself, using an app such as Rember).
But it certainly look as if it's a problem with your RAM. Since you've stock RAM, and since you can add your own RAM if you're out of warranty and Apple wants a fortune for RAM, if you do have bad RAM you can get new RAM from reputable dealers at a good price.
Good luck,
Clinton -
Trapping Problems with Placed Illustrator files
Mac 10.5.4 CS3
I am using CS3 to print postscript files and then making PDFs with Distiller. The Indesign file is full of .ai links that are not trapping correctly. When I view the PDF file the overprint warning shows up where the trap is correct.
The Illustrator file has a bottom layer set to a screened pantone color and has a Gaussian Blur effect applied that I can see in the appearance palette (this is to look like a drop shadow). On top of that is a Second pantone color with no effect at 100%. On top of that is outlined text of the first pantone color at 100%. All traps are set to the default. What it looks like is that the trap is showing as white when the file prints. So the text and the second shape have the look of a white stroke. The really confusing part is that blocks of these areas print correctly (no white line).
I have been told by my printers pre-press manager that he has a trapping software that fixes this issue for output so I am covered to get this printed. I want to know why this happens because we have several projects with this illustrator and if I can get her to alter her files as she creates them I wont need to "fix" several hundred files later.
Any fixes for this? Any idea why this would happen?
Thanks.If you intend on using transparent effects don't write postscript and then distill. Export to PDF right from InDesign instead. Postscript has no idea what transparency is and so it needs to be "flattened" for it to go through that type of workflow. Thats why the Illy files were ai's and not eps's.
-
Hey!
I need some help.
I have a problem with that Board.
When the system boots it stop and show s on the screen with the following text.
"Checking NVRAM."
Is this the Board or the prozessor?
Thx
RicoHi RicoM,
which BIOS revision you're using? If you're using any older than BIOS 5.4, please do an upgrade to BIOS 5.4 or 5.5 This fixes this problem.
Well, this problem is a boot trap problem. It occurs with BIOS 5.3 and earlier, with some particular BIOS settings enabled.
BIOS update will solve this problem. Please keep us updated if this problem remained. -
Installing OS9 onto G4 Digital Audio
Hi,
I was directed here to get better help with this topic. As the title says, I want to install OS9 onto my Digital Audio G4 tower but having little success. I have ttried various discs (9.0, 9.1, 9.2) and none let me install the OS. The best I can get is the "Welcome to Mac OS 9.1" before the bomb screen shows saying there was an unimplemented trap problem. To get that far I have to boot off of a 9.0 disc to get the Floppy and ? error before I change to a 9.1/9.2 disc to start the installer. If I try to boot from the 9.1 or 9.2 discs directly, my Mac complains that there's no bootable medium. I have tried various images and even retail discs (including one that came with the original OSX package) to no avail.
Is there anyone that can help?
Thanks,
NaokiMake sure your 1/2 AA 3.6V PRAM battery is under 4 years old. Make sure you are in fact using a Digital Audio:
http://support.apple.com/kb/HT3082
The Digital Audio never officially supported 10.5. If you used LeopardAssist to install 10.5 on it, double check with LeopardAssist's author that didn't affect your ability to use 9 with it, since 10.5 is not compatible with Classic, but is compatible with dual booting into Classic.
If the Mac has a third party processor upgrade, the firmware may have affected its ability to use 9.
Use this article to determine which versions of 9 CD can work with your Mac, once you have identified your Mac accurately with HT3082:
http://support.apple.com/kb/HT2191
Make sure your 9 retail copy says in black text the version of 9 that is newer than the minimum shown in the article:
9(.0), 9.0.2, 9.0.4, 9.1, 9.2.1 are all retail releases in the sequence of release.
The 9 CD has an orange 9 logo with a white background, and does not Upgrade, or Dropin on it, or any Mac model on it. Lastly, verify the startup manager can see the 9 CD after being inserted:
http://support.apple.com/kb/TA27043
And the curly arrow is clicked on it. If it doesn't see the CD, then it is not compatible. -
After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.Hello josefromlaie,
Thank you for using Apple Support Communities.
The following article provides some effective steps to troubleshoot trackpad issues:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
Regards,
Jeff D. -
Hi all,
I am having a problem resolving fan trap.
I am having a universe build over a MY SQL database.
The universe totaly consists of 4 tables and are related in the following way.
"A one to many B one to many C many to one D"
There are many 1-may joins between A and B and also between B and C.
There are measures and dimensions in A, B. And in C there are only measureas and 1 dimension.
When I pull the objects from all the three tables (A,B and C) there is a fan trap occuring and the values are getting inflated.
So I created an alias for B and defined a context for A, B and B alias and A,B and C. I have also checked the option of "Multiple SQL statements for different contexts."
But then I am trying to build a report in WebI and pulling the objects from both the unvierses there are 2 queries being generated and in the report, I am not able to pull the objects from different contexts into the same table.
If I select an object that is in context-1 the objects that are defined in context-2 are being dissabled and vise-versa.You can set this behaviour in the universe parameters under SQL->Multiple paths->Allow seleciton of mutliple contexts .
Still since you are solving a fan trap you should keep this option clear.
A solution is to fetch the data from 2 different contents using 2 different webi queries and then use the Merge dimensions functionality in the report itself to join the results.
Regards,
STratos -
Problem with Generating SNMP traps from Windows Events
Hi Supporter,
I configured some events to be translated to traps using evntwin for Service Control Manager and Local Session Manager events. But I just got traps from Service Control Manager event. There is no Local Session Manager events are generated. I checked
with Event Viewer that events are created. Do you have any idea to fix my problem?
Thank you!
Here is my config file from evntwin:
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790037 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790039 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790040 1 0
#pragma add "System" "Microsoft-Windows-TerminalServices-LocalSessionManager" 2952790041 1 0
#pragma add "System" "Service Control Manager" 1073748864 1 0#pragma ADD<EventLogFile> <EventSource> <EventID> [<Count> [<Period>]]
The parameter EventSource specifies the application that generates the event.
those maybe helpful...
http://www.questiondriven.com/2012/03/08/windows-server-20032008-event-log-snmp-traps/
http://www.networkcircus.com/articles/20050715.html
Best,
Howtodo -
SNMP Traps Monitoring problem.
Hi,
Hear is my problem. I am using SNMP Traps as Auto-Reaction Method to monitor some files system. I am already receiving Traps when the file exceeds the thresholds value (when change from Green to Yellow and when change from Yellow to Red). The problem that Im having is that I am not receiving Traps to reset these values (Reset from Red to Yellow and Reset from Yellow to Green). What do I have to do to receive those traps?Hi Santiago,
I am trying to send snmp alert from solution manager to Tivoli enterprise console. I did all configuration based on SAP document but Tivoli team keep saying that they did not receive anything. There is no way i can test on my side that what is the problem. When aler is generated, i see the MTE goes red and then alert status shows " Action required". However if I change the method to email, i receive emails. it is only SNMP which does not work.
Can you tell if i need to setup special parameter in SNMP method which i am missing. I did the following:
HOST - Tivoli server
Trapsort - UDP
Port - 162
MIB_DIR = /usr/sap//SID/SYS/exe/run/MIBS
Also is there any settings which Tivoli team has to do for receiving traps? It is possible for you to share the setup document? you can send it to me on [email protected]
Thanks for ur help.
Pavan -
Trapping preset creats problem in Indesign
I have Adobe CS4 Design Standard. I was using trap settings in Indesign. When we apply any trap preset (Default or self made) on any object or on all pages, Indesign goes quit and shows a dialogue box with message “"InDesign.exe has encountered a problem and needs to close. We are sorry for the inconvenience.” Is there any solution?
No need to post the same topic more than once. If someone has an answer they will do so.
http://forums.adobe.com/message/2348599#2348599 -
Hi,
I'm having a problem configuring traps for windows servers.
We have installed zen server management in a mixed Netware / Windows
environment. ZEN is running on a Novell OES cluster. Everything seems to
be running fine. Nodes are discovered and can be edited. However, when we
select a windows node, then select say "devices", right click that, and
choose actions -> trap configurations we only get Netware traps.
There is only one profile visible, and when we try to add another
profile,
the only thing we can add are Netware traps.
Windows and Dell open manage MIB's are compiled and are visible if we
look
ate the site configuration.
So how can we set Windows traps on windows nodes then ?
I'm sure there is a simple solution for this, but I can's see it at the
moment.
Any help is very much appreciated.
thanks in advance,
Ren VoortwistHoi Rene,
Hoe is het met mijn oud collega van Azlan. Alles goed verder?
Waar ben je op dit moment werkzaam?
Grt Robbie
> Hi,
>
> I'm having a problem configuring traps for windows servers.
> We have installed zen server management in a mixed Netware / Windows
> environment. ZEN is running on a Novell OES cluster. Everything seems to
> be running fine. Nodes are discovered and can be edited. However, when we
> select a windows node, then select say "devices", right click that, and
> choose actions -> trap configurations we only get Netware traps.
> There is only one profile visible, and when we try to add another
> profile,
> the only thing we can add are Netware traps.
> Windows and Dell open manage MIB's are compiled and are visible if we
> look
> ate the site configuration.
> So how can we set Windows traps on windows nodes then ?
> I'm sure there is a simple solution for this, but I can's see it at the
> moment.
> Any help is very much appreciated.
>
> thanks in advance,
>
> Ren Voortwist
>
> -
Problem trapping event in a matrix SBO 2004
Hi
I am trying to trap when the lost focus event in a matrix, so if the cell is empty I want to put the focus back into that cell and call a formatted search
I can't seem to get the cursor to go back to the original cell. Can anyone help please ?
Regards Andy
Case et_LOST_FOCUS:
' check if parish code is empty in posts matrix
If pVal.formuid = "CONTACTS" And pVal.ItemUID = "228" And pVal.ColUID = "u_dpcode" And pVal.Before_Action = False Then
Set oform = SBO_Application.Forms(formuid)
Set omatrix = oform.Items("228").Specific
If Trim(omatrix.Columns("u_dpcode").Cells(pVal.Row).Specific.String) = "" Then
omatrix.Columns("u_dpcode").Cells.Item(pVal.Row).Click ct_Regular
' SBO_Application.SendKeys ("+{F2}")
End If
Set omatrix = Nothing
Set oform = Nothing
End IfHi Paul,
Have you debuged the app and ensure if this line is executed?
omatrix.Columns("u_dpcode").Cells.Item(pVal.Row).Click ct_Regular
Which version is it?
in 2005, the Validate and Before_Action = true event is rised too, and you could use it to set the BubbleEvent to false(In 2004 it is not rised).
Regards,
Ibai Peñ -
Problems understanding SNMP OIDs/Traps
Dear Community,
i would be very glad if you could help me with this thopic...i seem to have some trouble understanding it...
Here an example:
2010-01-18 06:28:44 Unknown alert received from device ber-be-swt01.is24-rz.de of type SwCiscoIOS. Device Time 82+21:21:53. (Trap type 1.3.6.1.4.1.9.9.43.2.0.1.6.0)\nTrap var bind data: \nOID: 1.3.6.1.4.1.9.9.43.1.1.6.1.3.738 Value: 1\nOID: 1.3.6.1.4.1.9.9.43.1.1.6.1.4.738 Value: 4\nOID: 1.3.6.1.4.1.9.9.43.1.1.6.1.5.738 Value: 2\nOID: 1.3.6.1.6.3.18.1.3.0 Value: 10.3.32.2
Ok. Let's take the trap type:
1.3.6.1.4.1.9.9.43.2.0.1.6.0
Searching with SNMP Object Navigator (http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en) i only get as far as:
1.3.6.1.4.1.9.9.43.2.0.1 -> ...6.0 is unkown.
If i search for the OID
1.3.6.1.4.1.9.9.43.1.1.6.1.3.738 for example
i get the following:
1.3.6.1.4.1.9.9.43.1.1.6.1.3 -> ...738 is unknown.
This happens with a lot of OIDs for me (not just these ones). If i understand the OID correctly, this could be a command from the command line which forced this trap.
So what's the .738 for? Why couldn't it be recognised by the search-function?
In advance i like to thank you for any feedback.
Sven SchlingloffTry using my search and translate tool at http://jaguar.ir.miami.edu/~marcus/snmptrans.html . If you do, you will see that 1.3.6.1.4.1.9.9.43.2.0.1.6.0 translates to ciscoConfigManEvent. The OID 1.3.6.1.4.1.9.9.43.1.1.6.1.3.738 translates to ccmHistoryEventCommandSource. However, ccmHistoryEventCommandSource'd OID is 1.3.6.1.4.1.9.9.43.1.1.6.1.3. The .738 is the specific instance. The definition of ccmHistoryEventCommandSource is:
"The source of the command that instigated the event."
This object comes from the ccmHistoryEventTable which is indexed by the ccmHistoryEventIndex object. The definition of that object is:
"A monotonically increasing integer for the sole
purpose of indexing events. When it reaches the
maximum value, an extremely unlikely event, the agent
wraps the value back to 1 and may flush existing
entries."
So, the 738 is simply a unique number which identifies this particular history event.
Maybe you are looking for
-
Lion Very slow!! in Macbook pro 2.6GHz Intel Core2Duo
I need to reinstal snow leopard!! Lion isn´t work well in my laptop
-
Problem convert word 2007 acrobat 8 graphics to pdf
Having difficulty converting certain graphics from Word on Windows 7 Professional PC to Adobe PDF. The same problem exists on the same PC regardless of whether Word 2007 or Word 365 is the originating software. So it is not a problem with the version
-
In the Finder sidebar, under 'Shared', I encounter my TC, as well as another item with a long name starting with 'hp'. 'Get info' shows it to be a 'PC'. However, I don't have a PC. It cannot be my printer (HP), since that has anoter name. I can not a
-
Hi everyone, i have several questions for some errors that appeared with the last full system upgrade: 1. There is some message i get in the "waiting for udev events to be processed" part of the boot process: SP5100 TCO timer: mmio address [some memo
-
In IBM WSAD 5.1.2, can u put EJB Modules as a Jar