Trasnporting the Config Changes to Mobiel Client

Hi,
We are in CRM 4.0 and using the Mobile Sales.
We are using the oppurtunity management and I defined some new "phases" "Reason Codes" "Status" for the Oppurtunity transaction.
Now I am trying to send these new defined codes to the Mobile Client but I am not succesfful by doing the Conn Trans.
SO how can i transport these changes to the Mobile Client.
any suggestions are welcome

This is bizarre:
when you start the object, it selects all of the information  and sends it in packages to the inbound queue to be processed.
From the inbound queue, the data is transferred to the function processing the object, which collects the information in a bdoc and processes it from there. After that you have the CDB mapping &...
--> If the object is processing and shows a block, then at least one block of data is passed on to the inbound queue
--> If the inbound queue does not show this entry, it's either processed and saved as a Bdoc in your system, or the information was lost in a short-dump or update record.
(which should be visible in ST22 or SM12/SM13).
I guess the only thing left todo is:
- cancel all processing objects
- block the inbound queue
- start the sync object
- start the inbound queue-entry in debugging
- follow it to where the data is lost.
Grtz,
Michael

Similar Messages

  • ACS will not save the config changes to reports

    I have configured a very old ACS appliance, 4.1.  At this time this is what I we have to use.   The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config changes that are being made. 
    I'm hoping that someone may have an idea of what accounting command I am using or if this older version has some changes that need to be done as the config/aaa lines I use today and work on newer version work. I was under the impression that this line "aaa accounting exec default start-stop group tacacs+"  would send every command to the tacacs server?
    aaa new-model
    aaa authentication login default group tacacs+
    aaa authorization config-commands
    aaa authorization exec default group tacacs+ none
    aaa authorization commands 0 default group tacacs+ none
    aaa authorization commands 1 default group tacacs+ none
    aaa authorization commands 2 default group tacacs+ none
    aaa authorization commands 7 default group tacacs+ none
    aaa authorization commands 15 default group tacacs+ none
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    any ideas would be3 appreciated.  thanks for reading
    Yvon

    Hi martijn,
    Are there some custom fields in this list or some duplicate columns? Please have a check.
    For more information about the possible reasons and solutions, see
    http://social.technet.microsoft.com/Forums/en-US/sharepointcustomizationprevious/thread/ae946f73-3126-41ad-833b-25e4cc2b7723#e22af3fe-8203-45c4-8d19-e18041a048e2
    http://social.technet.microsoft.com/Forums/en-US/sharepointgenerallegacy/thread/59895a6b-7f61-431f-a762-e3fd9d81fe34
    http://social.technet.microsoft.com/Forums/en/sharepointcustomizationprevious/thread/eba4cd7e-498a-465f-adea-decae44d7a8c
    Regards,
    Kelly Chen

  • Transferring the conifguration Changes to Mobile Client

    hi,
    I have made some configuration changes in the Partner Determination Procedure for the Transaction Type Task.
    Now I want these changes transferred to Mobile Client.
    I tried to transfer these changes by running ConnTrans but these changes are not reflected in the Mobile Client.
    Is there any way to transfer the configuration changes to Mobile Client

    Hi zack,
    Customising data is not a delta load.  You need to run the cusotmising synchronization found at:
    Easy menu
    -> Architecture and Technology
    -> Middleware
    -> Data Exchange
    -> Synchronization
    -> Synchronize Objects
    The partner determination type adapter objects are:
    CRM_DNL_PAR*
    Cheers
    Andrew

  • Is there a way to find all config changes between clients and sap system

    We have our Dev system with clients
    310 - Developer make changes and create transport
    400 - Test client
    410 - a copy of our Production system (over 1 year ago0
    TST - this is our quality system with one client
    101
    Production system one client
    101
    I know if i do a database copy from Production to our TST system, both systems would be exact.
    Abaper Director wants to know all the configuration changes that are different between Devopment client 310 - Test and production.
    I told him that in development client 310 the abaper or functional users make most of the changes if they do  not get transported they would be missing.
    I cannot copy to client 310 otherwise we would loose all of our version management.
    Is there another way that I can see the config changes between all these clients.
    Thanks
    Joe

    You should be able to use tcode SCU0 
    Regards,
    Brian

  • How to track changes for the config done directly in quality client-Reg

    Hi,
    In our system the landscape is Dev,Quality,Production.
    For some transactions we will do the config in dev and transport to other clients or maintain in each client manually.Eg QS41,CI41.
    In my case ,I have did the config in CI41 and transported to other clients.But someone user get in to CI41 in Quality client and did some changes. Now how to track the user Id through which the changes has been performed  in QA directly.
    Regards
    SB

    hi
    you can use SE09 for displaying the transport no where you can see all the request nos ,from there you can check
    also use the same transaction Cl41 do some changes like description ,then press the save button ,system will prompt you the previous saved Request No and make a note of it .cancel the request generation ,then you can trace them in SE09
    also check whether you can find any change documents is available
    regards
    thyagarajan

  • After transfering the config to QA client.Ex group for No ranges not avail.

    Dear All,
    We have tranfer the configuration to Quality client,On checking the config in QA clinet under maintain excise group --excise group are available but while creating the no ranges In SNRO we are getting the massage Excise GRP -
    Z1 does not Exist.Once again I have created new request for this and transported but still the problem remain the same.Please guide.
    Regards,
    VR

    For maintaining no. ranges for any Excise group which has been configuered & transported, the same excise group has to be maintained in J_1inexcgrp (at the destination client) to enable no. range maintenance for the same at the destination client.
    This activity is in addition to regular config.
    Hope this will help.
    Regards,
    Akhileshwar  K

  • How to enable the client to know the DB change?

    Hi everybody.
    I am using DB2 and Tomcat Application Server. I am developing JSP pages. I would like to get the notification message whenever i update the database. Is there any interaction between Tomcat and DB2?
    Otherwise, How do i get this?

    What you wont doesnt exist.
    Its actually a complex problem. To know when the DB change you would want some notification to yourwebserver. And then if you want to warn the client you want a message from yuor webserver to your webclient.
    Both are really not trivial.
    The options you have are multiple. If you only have access to your DB through one point ( your webserver) then you can build in the notification there in your own code. If you have multiple DB access point then you will need some polling mechanism to check if your data changed.
    To communicate from yoour server to your client you will need to push technology, i am not expert in that but searching the web might get you some usefull exmaples

  • [svn] 2934: Update resources/config/messaging-config. xml to reflect the recent changes to throttling code.

    Revision: 2934
    Author: [email protected]
    Date: 2008-08-20 14:47:00 -0700 (Wed, 20 Aug 2008)
    Log Message:
    Update resources/config/messaging-config.xml to reflect the recent changes to throttling code.
    Modified Paths:
    blazeds/trunk/resources/config/messaging-config.xml

    O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
    I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
    I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
    This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
    I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

  • What are the config steps for contract mass change and quota arrangement?

    Hi friends
    what are the config steps for contract mass change and quota arrangement?
    Regards
    Raj Kumar

    Process Flow
    The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
           1.      Search for contracts
    You search for and select the contracts or the contract hierarchy that you want to change.
    Contracts that have the status Closed cannot be changed.
           2.      Define mass changes
    You specify the changes you want to make.
    You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
    Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
           3.      Simulate mass changes
    Here you can perform a trial run of your mass changes. This simulation step is optional.
    We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
    You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
    Background processing
    The system processes the changes in the background.
    If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
    The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
    Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
    The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
           4.      Carry out mass changes
    Here you apply the changes to the contracts.
    You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

  • [svn:bz-trunk] 9810: Update BlazeDS/ trunk to version 248835 of qa-frameworks. zip to pick up recent changes to the config suite.

    Revision: 9810
    Author:   [email protected]
    Date:     2009-08-30 06:58:37 -0700 (Sun, 30 Aug 2009)
    Log Message:
    Update BlazeDS/trunk to version 248835 of qa-frameworks.zip to pick up recent changes to the config suite.
    Fix problem in build.xml for config suite that would have caused mxunit tests not to run locally, ie. outside of a regression run.
    Fix problem with one of the config suite tests. The services-config.xml file used by the test looks like it was copied over from qa-regress and a bootstrapservice got removed from qa-regress along with the bootstrap class, so the copied services-config.xml file also needed to have the bootstrapservice removed because the class it depended on got deleted.  
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/dataTypesTest/s ervices-config.xml
        blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

    Revision: 9810
    Author:   [email protected]
    Date:     2009-08-30 06:58:37 -0700 (Sun, 30 Aug 2009)
    Log Message:
    Update BlazeDS/trunk to version 248835 of qa-frameworks.zip to pick up recent changes to the config suite.
    Fix problem in build.xml for config suite that would have caused mxunit tests not to run locally, ie. outside of a regression run.
    Fix problem with one of the config suite tests. The services-config.xml file used by the test looks like it was copied over from qa-regress and a bootstrapservice got removed from qa-regress along with the bootstrap class, so the copied services-config.xml file also needed to have the bootstrapservice removed because the class it depended on got deleted.  
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/dataTypesTest/s ervices-config.xml
        blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

  • How to migrate the transaction launcher config changes

    hi friends
    i followed this blog on transaction launcher on WEBUI and its working fine.
    /people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
    but when i do these config changes in SPRO,it didnt ask me any transport request to save into.
    how can i migrate these to QA and Prod?
    any idea.?
    thx,
    Niraja

    Thanks for your reply Gerhard,
    But when i did the SPRO changes for the Tlauncher, i didnt ask me any Transports, Its just got saved.
    I have one question here, when i follow ur steps, will it transport all the data or just my new changes? Meaning new Tlauncher data?
    In SPRO, how can i see the versioning, the current version.
    for example, when i go to Copy/Delete Tlauncher, in SPRO, how can i see the current Transport for that SPRO path?
    Could u pls help me,
    thanks,
    Niraja

  • Missing "Last configuration change at" into the config

    On two Catalyst 3750 12.2.(25r) SE1
    with the command "show run"
    I don't see the info:
    "Last configuration change at xx"
    "NVRAM config last updated at xx"
    I use the "normal command:
    service timestamps debug datetime localtime
    service timestamps log datetime localtime
    service password-encryption
    aaa new-model
    aaa authentication login default group tacacs+ local
    aaa authorization exec default group tacacs+ local
    aaa accounting exec default start-stop group tacacs+
    aaa session-id common
    On all other switches with the same config i haven't this problem
    IOS Bug?
    Best Regards
    Andrea

    Great!
    The clock was correct but the NTP server is not reachable (behind a Firewall)
    I have removed the NTP server, until the FW permit the NTP Protocol.
    Now all messages are written into the config
    Many Thanks
    Andrea

  • Confusion in Weblogic ReportsServer config without doing change the config?

    confusion in Weblogic ReportsServer config without doing change the config ?
    my env
    windows 2008 64 Bit
    WLS 10.3.5 64 Bit
    pfrd Forms/Reports 11.1.1.4 64 Bit
    after Install all and config my Forms and Reports
    the default reports server i found with
    http://wlog:8090/reports/rwservlet/getserverinfo
    had a name
    RptSvr_myserverhost_Formsreportsinstan,
    I did run my Forms and reports well with RP2RRO.RP2RRO_RUN_PRODUCT
    now some time later I found, that the reportsServer name is changed to
    rep_wls_reports_myserverhost_formsreportsinstance_1
    and I don't know, why ??
    I do start the WLS_REPORT by using the oracle-scripts using startManagedWebLogic.cmd
    In the WLS Admin Console there I can see the WLS_REPORTS Server is well started
    and after change the ReportServername in my forms to the 'new' servername
    I can start my forms with Reports again
    In the Enterprise Manager 11g under the reports-tree there are three entries:
    ReportsTools
    reports(11.1.1.2.0)(WLS_REPORTS)
    RptSvr_myserverhost_Formsreportsinstan ( the 'old' reportserver, that isn't started and not available )
    on Server in
    C:\Oracle\Middleware\asinst_1\reports\server
    there are two entries:
    rep_wls_reports_wlog_formsreportsinstance_1.dat
    and
    RptSvr_myserverhost_Formsreportsinstan.dat
    and in
    C:\Oracle\Middleware\asinst_1\reports\
    is in the reports_install.properties file :
    SERVER_NAME=rep_wls_reports_wlog_formsreportsinstance_1
    ORACLE_INSTANCE_NAME=Formsreportsinstance_1
    INPROCESS_SERVER_NAME=rep_wls_reports_wlog_formsreportsinstance_1
    what I have done, that can be the reason for now have two entries for reportsserver ?
    In the last days i worked to create the windowsservices
    to start the WLS_AdminServer and to start the WLS_FORMS / WLS_REPORTS
    ManagedServer
    and I changed the IP - Adress of the WLS - ServerHost, ( and back again )
    but didn't create a new ReportServer ore anything !
    what can I do, to fix this confusion ?

    Hello,
    In 11g , there are 2 Reports Servers created by default :
    - rep_wls_reports_myserverhost_formsreportsinstance_1
    The "in-process" Reports Server . WLS_REPORTS must be started and you can start this "in-process" Reports Server by just calling an URL like http://server:port/reports/rwservlet/getserverinfo or by using the menu in the EM web site
    - RptSvr_myserverhost_Formsreportsinstan,
    The Standalone Reports Server . You can start it using opmnctl command or using the menu in the EM web site
    Regards

  • SAP BI System Copy with only Config changes, Not Data

    Hi BASIS,
    I have a requirement from a client to build a system landscape stratagy for their SAP BI system.
    We have DEV - QA - PRD systems for SAP BI (7.0 SP 16)
    Both DEV and QA are completely out of sync with PRD. We are doing development tasks directly on PRD. Now we have decided to re-sync the DEV & QA systems with PRD.
    'System copy with Data' will be easier to implement. But our PRD DB size is nearly 3TB. The client is not ready to pay for the extra/temp. disk space for DEV and QA sync. ( We are on DB2).
    Now, we have only one option left. Capture all Config changes from PRD and transport them back to DEV & QA. This is a tedious task and cause many inconsistencies.
    Would anyone have any other ideas to bring the systems in sync with less time involved and less resources.
    I am a SAP BI person. So dont know much about BASIS tasks. Please help me with any links of best practises or SAP notes.
    Cheers

    HI Reddy,
    We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
    As it is integrated with EP which has Java, our web reports are working.
    1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
    2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
    Regards
    Kumar

  • Troubleshoot Cisco Airlap 1242 with WLC 4400 Series LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response

    I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
    after debug in my airlap it shows :
    Reset done!
    ethernet link up, 100 mbps, full-duplex
    Ethernet port 0 initialized: link is up
    Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
    File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Mon 19-Mar-07 01:42 by hqluong
    Image text-base: 0x00003000, data-base: 0x004051E0
    Initializing flashfs...
    flashfs[1]: 9 files, 3 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 15998976
    flashfs[1]: Bytes used: 5062144
    flashfs[1]: Bytes available: 10936832
    flashfs[1]: flashfs fsck took 4 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    cisco AIR-LAP1242AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
    Processor board ID FCW1411U0FZ
    PowerPCElvis CPU at 266Mhz, revision number 0x0950
    Last reset from power-on
    1 FastEthernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 68:EF:BD:5F:9A:18
    Part Number                          : 73-10256-07
    PCA Assembly Number                  : 800-26918-06
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC14093XU3
    Top Assembly Part Number             : 800-29152-03
    Top Assembly Serial Number           : FCW1411U0FZ
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1242AG-E-K9
    Press RETURN to get started!
    *Mar  1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
    *Mar  1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
    *Mar  1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
    *Mar  1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
    *Mar  1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
    *Mar  1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
    *Mar  1 00:00:09.326: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Mon 19-Mar-07 01:42 by hqluong
    *Mar  1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
    *Mar  1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
    *Mar  1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    *Mar  1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    *Mar  1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
    *Mar  1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
    *Mar  1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
    *Mar  1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
    *Mar  1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
    *Mar  1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
    *Mar  1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
    *Mar  1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
    *Mar  1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
    *Mar  1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
    *Mar  1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar  1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Mar  1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
    *Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
    *Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
    *Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
    *Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
    flashfs[0]: 9 files, 3 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 15998976
    flashfs[0]: Bytes used: 5062144
    flashfs[0]: Bytes available: 10936832
    flashfs[0]: flashfs fsck took 26 seconds.
    Base ethernet MAC Address: 68:ef:bd:5f:9a:18
    Initializing ethernet port 0...
    Reset ethernet port 0...
    Reset done!
    and after that i check in my WLC that shows
    AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
    The reulatory domain configured on it '-e' does not match the controller's country
    code: USA
    i found that the problem about the region.
    question :
    1. is it possible to change the region in AIRLAP 1242 or in WLC?
    2. if possible how to change it?
    INFO :
    my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9

    WLC GUI >> Wireless >> Country >> Select the country.
    Regards
    Surendra

Maybe you are looking for

  • Error while deleting master data

    Hello all, i require some help. i am unable to delete some record from the master data it gives me a message "y table for the characteristic does not exist". the master data object does not contain any navigational and time depended attributes. the B

  • Flash works on some websites but not others

    I have been struggling with some Flash player issues for a while. Most of these were, I believe, due to a spyware infection that I have since resolved. I have tried to uninstall and reinstall the player plugin several times. I have gotten to the poin

  • I click on a button to bring up a PDF form to print, button doesn't work and I get "javascript history.go(0).

    I just this week started to use Firefox 4.0 Beta 12. Our golf organization has a website that has tournament entry forms in the PDF format. You click on a button and get the form ready to print. When I click on the button, I don't get the form and th

  • Localization in Polls taskflows in Webcenter portal

    Hi All, I am working on 11.1.1.6. I am developing a portal which will support 2 languages English and Arabic. I have done all the configuration and I am able to switch between these two languages. In my portal I have used the Polls - Take Polls task

  • NoSuchAlgorithmException under win server 2003, but not 2008

    I have a strange error, I can reproduce but which I can't quite figure out the cause or solution to. vitals: javamail 1.4.4, Windows Server 2003, JBoss. So, I have a pretty large stack trace I won't include (yet), but it starts with a NoSuchAlgorithm