Tray selection problem

After upgrading to Leopard I had this problem: printing to any of my printers (Xerox Docucolor 12, Docucolor 2240, Docucolor 3535, Phaser 8500, Develop 5510id), *in the print dialog window I select a tray (i.e. tray 2), and the printer uses the tray "before" that (in this case tray 1).*
So I can no more print from my "last trays" (typically the bypass tray) because there are no more trays after them in the tray selection tab. The only thing I can do is to leave "automatic selection" of the tray, but this don't work in all occasions (for example when I have to print from bypass on heavyweight paper which has the same size of the paper present in another tray).
What kind of problem can this be? Maybe a PPD corruption problem (but the corruption of ALL the PPDs is not so easy...)

I experienced the same problem with our Canon imageRUNNERs on Leopard using the Canon PPD's. If I used the Canon PS driver the same symptom did not occur, however for some apps it was necessary to use the ppd's only.
The only workaround I found was to print via paper type rather than paper source. By selecting to print via paper type, this meant that if A3 heavy card stock was loaded in the stack bypass, as well as A3 80gsm plain paper in one of the trays, only the paper from the bypass was selected.
I don't believe it is ppd corruption. It has more to do with CUPS not parsing the ppd data correctly. For the drivers that do not rely on CUPS, such as the Canon PS driver and the new imagePASS (Fiery) drivers, the same issue does not occur.
PaHu

Similar Messages

Installing FF cause tray selection problem on printer

After installing Firefox cannot print selected trays. Just prints to bypass.

I experienced the same problem with our Canon imageRUNNERs on Leopard using the Canon PPD's. If I used the Canon PS driver the same symptom did not occur, however for some apps it was necessary to use the ppd's only.
The only workaround I found was to print via paper type rather than paper source. By selecting to print via paper type, this meant that if A3 heavy card stock was loaded in the stack bypass, as well as A3 80gsm plain paper in one of the trays, only the paper from the bypass was selected.
I don't believe it is ppd corruption. It has more to do with CUPS not parsing the ppd data correctly. For the drivers that do not rely on CUPS, such as the Canon PS driver and the new imagePASS (Fiery) drivers, the same issue does not occur.
PaHu

Wrong automatic paper tray selection in HP LaserJet M3035 printer.

Hello,
I have a printer (this one http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328064-12004-3328083-2512333-2512337-3435... ) shared in Active Directory by several users (running Windows XP machines). The thing is that no matter how many times I try to set the source paper tray to a specific one, it seems it doesnt apply/store the changes, and it comes back to Auto tray selection (and it always selects tray #1, which is the one im trying to avoid), causing an issue which needs to be solved by hand.
Thanks a lot in advance.

1. Go into your SETUP MENU on your printer.
2. Choose PREFERENCES
3. Choose DEFAULT TRAY.
Try it and let me know what happens, thanks.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Tray selection of printer doesn't work with printing order confirmation

Hello,
When we try to print output for the order confirmation document (BA00 and custom ZBA0) on a different paper tray (e.g. tray 2 for printer avbekyo-01_tray2 in SAP R/3) then the ouput is printed to tray 1 in stead. We have defined two different printers in SAP for the tray selection. We tested the ouput on different printers, besides the avbekyo-01 and went wrong on the others also. When we print out an invoice (ZRD0) to the printer on the second tray, the invoice is printed correctly from the second tray. With an ABAP developer we debugged the print process, but no code leads to the fact that the output for the order confirmation should be printed to the first tray, while the second tray was selected in the output record. In the code still the second tray is processed, but printed on the first. The only difference we can find is that the order confirmation is SAPScript and the invoice is a Smartform. Does anyone know a solution?.
Kind regards

Unfortunately the setting doesn't resolve the problem. We also have activated the settings of Tray2 in the option Tray Info.
Edited by: Chantal Polman FUNC ACCOUNT on Jun 4, 2008 2:32 PM

Printer tray selection VS2010

We have the following questions regarding windows printer default tray determining tray to print from:
 
1. When we set m_reportClass.PrintOptions.PaperSource = CrystalDecisions.Shared.PaperSource.FormSource, it defaults back to Auto (we can see that when we debug, it simply ignores the command) - why is that, and which option should we use to get the printer to use PrinterDefaultTray?
 
2. Default Printer impacts rpt. file even though "No Printer" is checked in the Page Setup dialog - so the default printer set on the developer PC opening the Page Setup of a .rpt file (not making a change, just opening) will change the file. Why is that and what change is made?
 
3. We have made a default 'dummy' printer on the developer pc which is used when opening the .rpt file. If a similar printer with the same name does not exist on the PC printing the report, we cannot control the tray that is prints from.
 
Is there a viewer that can show what has been changed inside an .rpt file to better understand what is happening to the file when it is opened in VS2010?
 
We are experiencing an issue with Crystal Reports VS2010 when trying to print reports to a specific tray. We have recently upgraded from .net 1.1 to .net 4.0 and in relation to this we also upgraded the CR version.
 
In the previous version we were able to setup windows printers with a specific default tray and when printing to this windows printer, the default tray of this windows printer was used. We have a range of printers being used in a client windows forms application, so we need to be able to continue letting the windows printer definition determine which tray to use. Preferable we would like to set PaperSource to UsePrinterDefaultTray, but that option does not seem to exist (or we have not found it yet). We have found another solution, but would like to understand why it works so we know that it is a viable solution.
 
The application is based on creating a report using the CrystalDecisions.CrystalReports.Engine.ReportClass. The example below has been shortened for readability:
 
CrystalDecisions.CrystalReports.Engine.ReportClass m_reportClass = new new EKRB007A(); 
// create/get data for report 
// u2026 
m_reportClass.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA4; 
m_reportClass.FormatEngine.PrintOptions.PaperSize = CrystalDecisions.Shared.PaperSize.PaperA4; 
 
m_reportClass.SetDataSource(this.dataSet); 
 
CrystalDecisions.Shared.PageMargins pm = new CrystalDecisions.Shared.PageMargins( 
 this.getA4InvoicePrinterOriginalHorizontalAlignment(), 
 this.getA4InvoicePrinterOriginalVerticalAlignment(), 
 m_reportClass.PrintOptions.PageMargins.rightMargin, 
 this.getA4InvoicePrinterOriginalVerticalAlignment() ); 
 
m_reportClass.PrintOptions.ApplyPageMargins( pm ); 
 
// The name of the windows printer to use is read from parameters. 
m_reportClass.PrintOptions.PrinterName = this.getA4InvoicePrinterCopy(); // here it will return 'InvoicePrinter' 
 
m_reportClass.PrintToPrinter( 
 1, 
 true, 
 1, 
 m_reportClass.FormatEngine.GetLastPageNumber( new CrystalDecisions.Shared.ReportPageRequestContext())); 
The printer has the 'No Printer' set in the Page Setup dialog as we have different printers with different number of trays, so we need to be able to specify the printer at runtime (according to the VS2010 CR documentation, there should be two dialogs - Print Setup and Page Setup, but in VS2010, we can only find the Page Setup, and it includes some of the options from the old Print Setup dialog).
 
Developer A, has two printers: printer 'Generic Text' set to default and printer 'InvoicePrinter' (the one to print from as read from the paramter in the above code). The 'Generic Text' is a generic text printer with no trays and the 'InvoicePrinter' is an OKI printer with two trays. 
Developer B, has printer 'InvoicePrinter' set as default. 
Developer C, has two printers: printer 'SalesList' set to default and printer 'InvoicePrinter' 
Developer A sets up printer 'InvoicePrinter' to print in tray 1 (and 'Generic Text' is default printer). Then opens the .rpt file and compiles. If a print is made on the developer PC, it prints to the correct tray. We can change 'InvoicePrinter' to tray 2 and again it prints correctly. However, if the same .dll is deployed on Developer B's PC, and a print is made, it always uses the same tray even though the windows printer is changed (it actually uses the 'InvoicePrinter', but it ignores the tray it is configured to use). The same is the case for Developer C's PC.
 
We have tried to set m_reportClass.PrintOptions.PaperSource = CrystalDecisions.Shared.PaperSource.FormSource and m_reportClass.PrintOptions.PaperSource = CrystalDecisions.Shared.PaperSource.Auto, but it has no impact.
 
If Developer B adds a printer called 'Generic Text' (even though it is not to be used) AND sets this printer to be the default printer, then it works exactly as on Developer A's PC - meaning that the windows printer tray definition of 'InvoicePrinter' is used correctly.
 
Our solution rigth now is to install a 'dummy' printer on all developer PCs and on all client PCs. This printer must be set as default printer on developer PCs so when the Page Setup of any .rpt file is opened (yes, just opening it changes the file), the new file generated will be based on the 'Generic Text' printer. We will then change the default printer on client PCs just before printing to the 'Generic Text' printer and set it back to their 'normal' default afterwards.
 
In my dev team we all agree that this is not the optimal solutions, so any suggestions will be well received.
Edited by: Visual Reporting ApS on Oct 17, 2011 12:08 PM

Use the InProc RAS SDK, not CR SDK. More functional, same licensing.
See the following forum threads:
|Re: Using printReportOptions.BinName, Tray Printing
Re: Printer Tray Selection
Re: Custom Paper Size & Orientation Problem
Re: 8.5 x 5.5 paper size in VS2010 with Basic Crystal report
Re: How to print a report in landscape?
And don't forget to do more searching. Also, sample InProc RAS apps are [here|https://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples].
An intro to InProc Ras:
[How to Use The RAS SDK .NET With In-Process RAS Server|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Selection Problem with JTable

Hello,
i have a selection problem with JTable. I want to allow only single cell selection and additionally limit the selection to the first column.
I preffered the style from MS Outlook Express where you can select the email accounts to edit.
It is a table like this:
Account name |   Type |   ...
--------------|---------|---------------------
Hotmail       |   POP3 |
GMX           |   IMAP |The selection should be only avaibable at 'Hotmail' or 'GMX' - not at 'POP3', 'IMAP' or as complete row selection.
Please help me!
Thanks.
Warlock

Maybe this will helpimport java.awt.*;
import javax.swing.*;
public class Test3 extends JFrame {
public Test3() {
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = getContentPane();
    String[] head = {"One", "Two"};
    String[][] data = {{"R1-C1", "R1-C2"}, {"R2-C1", "R2-C2"}};
    JTable jt = new JTable(data, head);
    jt.getColumnModel().setSelectionModel(new MyTableSelectionModel());
    content.add(new JScrollPane(jt), BorderLayout.CENTER);
    jt.setCellSelectionEnabled(true);
    jt.setRowSelectionAllowed(false);
    jt.setColumnSelectionAllowed(false);
    setSize(300, 300);
    setVisible(true);
public static void main(String[] arghs) { new Test3(); }
class MyTableSelectionModel extends DefaultListSelectionModel {
public void setSelectionInterval(int index0, int index1) {
    super.setSelectionInterval(0, 0);
}

Does the Officejet 8600 Pro Premium N911n printer perform auto tray selection?

I have an Officejet 8600 Pro Pemium N911n printer, CN577A with two trays. My Operating Sysem is Win8,64bit,there are no error messages, no system changes.
The HP Officejet Pro 8600 e-All-in One series User Guide states that By default, the printer draws media from Tray1.If Tray1 is empty, the printer draws media from Tray2(if it is installed and loaded with media. I have Tray lock disabled ,Tay1 the default Tray and Automatic Tray Selection enabled.Prior to making these selections,I contacted HP support via email to report that this option was not working. I received a response that there is no method that will automatically select a tray when one tray is empty. The User 's manual states otherwise..This option might not work but it is part of this series of printers. I have both trays loaded and I will determine if it works after Tray1 is empty. Does anyone have one of these printers and the auto Tray function works? Thanks.
This question was solved.
View Solution.

Hello wardell1,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Select Problem For 'Back Menus' - Zen V P

Just got the Zen V Plus and tried to set the time/date. Followed the 'guide' and after the time/date screen pressed the 'back button'. Got the Set Alarm/Date/Time (etc) menu but when I selected an option (moved joystick down to desired option then pressed the joystick) the time/date display came up and I was NOT ABLE to set the date. Same thing occurred trying to set the date (tried it several times and it worked once .... then attempted again - several times (4) but it only worked once). Turns out I have the same problem with any option in ANY 'back' menu. Suggestion?
Do I have a defecti've unit (can't be the 'operator' who is defecti've! haha)? Should I return it and try another?
Actually not that interested in playing music .... it's more for playing .wma(DRM) book files.

Latest ... updated my firmware (to ZENVPlus_PCFW_P4S_L2___0.exe) and it fixed the select problem for SET DATE/TIME etc however
the SELECT procedure doesn't always work for 'back button' menus. Example: tried to set a bookmark... following procedure in 'guide', pressed 'back button' and held it, from 'NOW PLAYING' screen - works 2 out of 5 times. Most of the time, pressing and holding takes you back to the previous menu - not to the 'back' (or in this case the SET BOOKMARK) menu. Sounds like something for the next version of firmware ... the code doesn't always set an internal timer correctly (am a programmer of 30 years ... part of that time pgmmng firmware).

Smart form dynamic tray selection on printing

Hi Experts,
I have a requirement in smart form that need to output the a particular invoice to a particular tray a printer. For e.g. tray 2.
I have added TRY02 to the resource name of the pages in the smartform, but still the invoice is being printed to the default tray of the printer.
I have done a test to that printer by printing the SAPCRIPT-TRAYTEST from SO10, and the output is being printed correctly i.e. to the different trays. So I guess the printer has been configured correctly.
Is there any additional configurations that need to be done for smart forms for the tray selection works correctly? And, is it correct the way I implemented the functionality in the smart form?
Can someone help please?
Thanks in advance
Regards,
Zaheed

Hi Experts,
I have a requirement in smart form that need to output the a particular invoice to a particular tray a printer. For e.g. tray 2.
I have added TRY02 to the resource name of the pages in the smartform, but still the invoice is being printed to the default tray of the printer.
I have done a test to that printer by printing the SAPCRIPT-TRAYTEST from SO10, and the output is being printed correctly i.e. to the different trays. So I guess the printer has been configured correctly.
Is there any additional configurations that need to be done for smart forms for the tray selection works correctly? And, is it correct the way I implemented the functionality in the smart form?
Can someone help please?
Thanks in advance
Regards,
Zaheed

Can we change tray selection dynamically?

Hello experts,
is it possible to change the tray selection dynamically? That is to say, via the driver program.
For example the default tray on the SAPscript form is TRY02. So if there are less than 20 lines on a form, it'll use TRY02 containing paper with pre-printed text. However, if there are more lines, then, I would like it to use TRY03 containing blank paper, for the rest of the information.
Is this possible via programming or any other way for that matter?
Your help is greatly appreciated.
Edited by: Goharjou ardavan on Oct 29, 2008 11:07 AM

Hi,
Tray Options are available in the Output Device. You can't control it from the SAP Script. In Output device Tray's will be defined, But there is no option to shift the Tray based on the lines.
But If you guys can define two output device, one with tray TRY02 and other device with tray TRY03. Then in the program based on the how many lines, Pass the Respective Output device to the Spool structures in the program.

Print selection problem

when i select a page to be print from my pc the page select in

Hello. I feel your pain and frustration with the print selection problem in safari, especially in Snow Leopard. I have spent hours trawling help pages and forums etc. BUT YEE HAA (sorry got a bit excited, but it really was hours) I found the answer. So here goes.
Click on Safari
Scroll down to services then slide to right
Scroll down to services preferences and click
Scroll down to the Text section
If you Tick the Text box it will choose all options for you. Or if you don't want all options in the Text list, then untick Text box and tick options you do want.
BUT for your print selection problem make sure you tick NEW TEXT EDIT WINDOW CONTAINING SELECTION.
Then when you want to select something in a web page you want to print (including pictures etc) then highlight it, then Right click. And low and behold, in the list is NEW TEXT EDIT WINDOW CONTAINING SELECTION. Click that, Then press cmd+p and your printing.
I really hope that helps with your problem
I can now go to sleep.

At Line selection problem

hi,
iam stuck up with AT LINE-SELECTION problem ie i designed a screen where they need month list on clicking F4. i got the month list using month_names_get in the screen but while clicking the relevant month no.it's not entering into the required parameter. i have attached the codings,
MODULE MONTH_DIS OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS SPACE.
NEW-PAGE NO-TITLE.
WRITE:/ 'SELECT MONTH' COLOR COL_HEADING.
ULINE.
DATA: T_MNTH LIKE T247 OCCURS 12 WITH HEADER LINE.
refresh t_mnth.
CALL FUNCTION 'MONTH_NAMES_GET'
 EXPORTING
 LANGUAGE = SY-LANGU
IMPORTING
RETURN_CODE =
 TABLES
 MONTH_NAMES = T_MNTH
 EXCEPTIONS
 MONTH_NAMES_NOT_FOUND = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_mnth.
 write:/ t_mnth-mnr, t_mnth-ltx.
endloop.
CLEAR T_MNTH-MNR.
ENDMODULE. " MONTH_DIS OUTPUT
AT LINE-SELECTION.
p_period = t_mnth-mnr.
CHECK NOT p_period IS INITIAL.
LEAVE TO SCREEN 0.
here in the AT LINE-SELECTION, the selected month is not coming to the required parameter.
pls help me in this issue,
Thanks in advance,
Premnath.

You need to set a "Hide" after the write... I suggest you also set your own dialog PF-STATUS too so you can have just a PF2 "pick" button and a Cancel button ( this will look better to the user).
loop at t_mnth.
write:/ t_mnth-mnr, t_mnth-ltx.
hide: t_mnth. "needs this
endloop.
clear: t_mnth.

Weird BGP path selection problem

Hi, all,
I am seeing a weird BGP path selection problem on 4948 switch running cat4500-entservicesk9-mz.122-46.SG.bin code, this switch has two uplinks to the same ISP's different edge router, one circuit is primary the other one is strict backup, only default route is accepted from ISP. I am setting both local preference and weight to the default route advertised over backup link, however neither one is taking effect, BGP still thinks the backup link is better, what could be wrong?
rtr#sh ip bgp 0.0.0.0/0
BGP routing table entry for 0.0.0.0/0, version 105
Paths: (3 available, best #2, table Default-IP-Routing-Table, not advertised to EBGP peer)
Not advertised to any peer
17675, (received & used)
 203.169.8.37 from 203.169.8.37 (61.211.160.150)
 Origin IGP, localpref 100, valid, external
 Community: 65001:0 no-export
17675
 203.169.8.45 from 203.169.8.45 (61.211.160.151)
 Origin IGP, localpref 90, weight 90, valid, external, best <====
 Community: 65001:0 no-export
17675, (received-only)
 203.169.8.45 from 203.169.8.45 (61.211.160.151)
 Origin IGP, localpref 100, valid, external
 Community: 65001:0 no-export
Thanks

Hi,
On cisco routers , weight is having highest preference to decide best path. By default for received route, weight is 0 but you are setting weight 90 to backup path and that is why it is getting preferred (higher is better). Please remove weight and let local preference be 90 (lesser than route on primary path)
--Pls dont forget to rate helpful posts--
Regards,
Akash

Tray selection with LOCL in sapscript

I want to print the document from Tray 2 always and so I set the resource name in the sapscript to TRY02. When I put the printer name in, it works fine and prints from tray 2. But when I put LOCL as the output device, it always prints from the default tray. Does anyone have a solution to this?

I think this is because of your local printer configuration
Please find the documentation related to this-> this documentation i found in start> printer and faxes>select your default printer> right click> properties> help> index --> find tab > type tray> Selecting paper by type or source
If your application supports printing by paper type or source, make the selections from your application. Application settings override printer driver settings.
You can configure the printer to select paper by Type (such as Plain or Letterhead) or Source (such as Tray 1 or Tray 2). If you frequently use several different kinds of paper, once trays are set up correctly from the printer control panel, you do not have to check which paper is loaded in each tray before you print.
Your paper trays must be configured from the printer control panel before you can print by type. To configure your paper trays, see the printer user guide.
a®

Tray selection for sapscript

I am working on tray selection for an invoice sapscript. It should print in Tray 2 and so I have set Resource Name in Sapscript form to TRY02.
It works in one client and not in another client. Does anyone have an idea why this could be?

Please check thru transaction code SPAD
In SPAD > select the printer>. On the output devicescreen,--> menu selection Goto --> Device Type. This will allow youenter specific PCL code for all Print Controls.
SE71 -> on page layout, --> give a tray name (TRY01) in the resource name to all pages in the sapscript.
But you should know the printer PCL codes (basis can help you on this)
a®

Tray selection problem

Similar Messages

Maybe you are looking for