Treo Pro - Speakerphone turns on during a call, even though I didn't ask it to.

Hello
Whenever an incoming call comes in the speakerphone on my Treo Pro turns on without being prompted. Have tried hard resetting and disabling the touchscreen during a call (incase it was my ears activating it) but none of this has worked. Can't seem to find anyine else with the same problem.
Please help!
Thanks
Ben.
Post relates to: Visor Pro

If you have hard reset the device, and you have disabled the screen this sounds like it may be a hardware issue that you may want to address with Palm customer care at 877-426-3777. There will not be any charge for this if it is a hardware issue and you are still under warranty; however there is a initial fee of 14.95 if you are out of your 90 day free tech support period for tech support to determine this. This would be waived if it turns out to be hardware issue.

Similar Messages

  • My LCD does not turn off during the call. I have a iphone 4. What do i do?

    My LCD does not turn off during the call. I have a iphone 4. What do i do?

    You may have a defective proximity sensor but try some basic troubleshooting first...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me?

    My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?

    Ok....
    Now go to your router's settings.  Not sure who makes your router...
    Look at wireless part of it and see how many computers are actually hooked up to it.
    Delete your computer from it (in your router).
    Restart your router.
    After your router has restarted, try to connect to it with your MB and see if you can browse the net.

  • Iphone 4 turns off during phone call

    My iphone 4 bought in portugal to vodafone is randomly turning off at full charge during phone calls is driving me crazy!!! It has been to vodafone twice.

    Thanks for sharing.
    Are you asking a question here?

  • My 4S iphone keeps trying to turn off during phone calls and drops the calls.  Sometimes I have to call back 3-4 times to finish a conversation.

    While talking on my iphone, the phone tries to turn itself off.  Not just once, but continuous, and not just dropping the call, but actually tries to turn itself off.

    Well, then I'm glad this is most probably not a hardware issue - at least not an exceptional, maybe defect of all? -. This seems to be a good idea, because 2G will nearly everywhere available, so phone calls are not likely to drop at all. I'm just a bit confused, because they promised intelligent switch even during calls. For me that means that if the better, faster connection is available, then it uses that, and if it wouldn't be, then it switches to the slower one.
    Anyways, thanks for your reply. I guess it's a "just get used to it" issue.

  • Iphone turn off during phone call

    Hi, my iPhone 3GS (with iOS 5.0.1) turn off automatically during normal phone calls (i.e. without hands-free talking) after approx. 5 minutes. After a couple of minutes the iPhone come back to the normal "standby" situation, i.e. I can press the home button and unlock the iPhone to do everthing like normal (without any long phone calls). When I am using hands-free talking (like in the car) the iPhone is working as expected without any malfunction.
    This effect was shown up at each call (> 5 min.) since the update to iOS 5. By using of iOS 4 the iPhone has worked as expected.
    Who knows about this effect and possible solutions to fix it?
    Kind regards, Frank

    Connect iPhone to Wall Charger for 10 minutes, it may turn ON itself. If still nothing, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to respond.

  • Webcam Randomly Turning Off During Video Calls

    During a video call, my video will randomly stop.  I can start it again without problem, but would love to figure out why this is occurring, so that I can stop it from happening.  My video is showing perfectly fine in the Audio/Video settings.
    The camera is showing as a FaceTime HD Camera.  I'm on Yosemite 10.10.1 with Skype version 7.0 (653).
    Has anybody experienced this before and know how to fix it?

    Thank you!  I'm glad I'm not alone.  I've had my pre for about 6 weeks and I love it. So... I bought an INVISI-SHIELD for over $20 at Best Buy.  Then the flickering and blank screens started a few days later. The only difference was the new protective, invisible, EXPENSIVE piece of plastic - so I trim it back to just the face (assuming it was a side sensor glitch) but it still didn't stop it.  So I peeled off the skin tonight and it seems to be fine... for the time being.
    A WARNING would've been nice before I spent my money. I want to be reimbursed by Sprint! Thanks community - it was nice to get help from YOU!

  • Curve 8900 turning off during a call

    hi i got my corve 8900 for sometime now and every time i make or recieve a call the blackberry turns off and then turns on again what do i do, its beggining to annoy me now someone please help me my pic in is:   [removed personal information]

    I would make sure the OS is updated to the latest available.
    Follow the instructions in the post below:
    http://www.blackberryforums.com/general-8900-series-discussion-javelin/223863-latest-os-8900-5-0-0-1...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • During phone calls the screen doent turn off, during phone calls the screen doesn't turn off

    The phone screen doesnt turn off when i put it on my ear to make a phonecall

    This may very well be an issue with the proximity sensor. Take it to an Apple Store; they'll be able to let you know for sure. But first, to rule out a software issue, try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears.

  • Iphone 6 turns off during phone calls

    Hello,
      This happens intermittently when making a phone call. Screen goes dark, -cannot bring screen back on and have to shutdown the phone and restart.
    Any ideas as to where to start to resolve this?

    KBurd,
    If the proximity sensor is covered by a case, your hand, or by being close to your face, the screen should go dark and unresponsive, but the call should not be disconnected.
    Is there anything covering the proximity sensor? It is located between the earpiece and the top edge.
    Hope this helps,
    Nathan C.

  • IPhone turning off during Phone Call with iOS 4 and very slow performance!!

    Ever since the update, my phone has been switching itself off during a conversation.
    Has any one else experienced this problem since the update???
    Do you have a solution, if so please post it and help me!!!
    Also, the phone has been going very slow.
    Keyboard appearing 20 seconds later, after opening a new note and overall slow performance.

    Thread here :
    http://discussions.apple.com/thread.jspa?threadID=2471090&tstart=15

  • Screen turns black during video call on Xperia Z

    Me too....i am using xperia z....any update on this matter.

    alexrx - I was not sure what the test is supposed to do.When I clicked on the Proximity Test in the meny I got a black screen that said "Proximity switch ON". It did not change if moving the phone around.
    I did not know where the proximity sensor was located - but a little google helped me along. For others who might find this post - it is located in the upper left corner. Having a screen protector covering the sensor I decided to remove that and it seems to work now. So a dirty screen protector seems to have been the root cause of the issue.
    Thank you for pointing me in the right direction :-D  (I wish the guy at the Sony support chat had been able to do the same...)

  • Palm Pre turning off during phone calls

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Thank you!  I'm glad I'm not alone.  I've had my pre for about 6 weeks and I love it. So... I bought an INVISI-SHIELD for over $20 at Best Buy.  Then the flickering and blank screens started a few days later. The only difference was the new protective, invisible, EXPENSIVE piece of plastic - so I trim it back to just the face (assuming it was a side sensor glitch) but it still didn't stop it.  So I peeled off the skin tonight and it seems to be fine... for the time being.
    A WARNING would've been nice before I spent my money. I want to be reimbursed by Sprint! Thanks community - it was nice to get help from YOU!

  • Very low volume on calls even though volume is on high

    My iphone4 worked perfectly until a few hours ago, but now I can hardly hear people when they call. My volume is turned all the way up, and works fne with earbuds and music. Any suggestions?

    It seems I have the same problem on my iPhone 4
    iPhone 4 iOS 5.2
    FYI: No plastic cover blocking internal speaker and all Volume settings of my iPhone are up.
    Problem description:
    A) When placing a call, (Using internal phone’s ear piece) the volume of the “Simulated” dial tone is extremely low.
    B) Once connected to the other party, the volume of the person speaking at the other end is extremely low.
    C) The other party can hear me loud and clear.
    This problem does not appear when:
    1 - I use the earphones (headset) supplied by Apple.
    2 - I select “Speaker” from the keypad to talk using the “speakerphone”
    3 - I use a bluetooth headset.
    Important: I realized this issue started when I upgraded my iPhone from iOS 5.0 to 5.1
    In order to troubleshoot this issue:
    I restored the iPhone several times with no success while on iOS 5.1
    I upgraded the iOS 5.1 to the latest 5.2 but the problem persists.
    I tried any workaround suggested in the internet (There many iPhones having the same problem)
    I already sent a bug report to Apple about this issue.
    Any idea please??

  • IPhone 4S no longer will send or receive texts or calls even though it shows I'm connected to my Sprint Server.

    Hello everyone, I'm in need of some major help with my IPhone 4S.  I'm very confused and frusterated!  My friend had originally purchased two IPhone 4S phones about two years ago.  I know this because he decided to give me his second IPhone 4S that was no longer being used by the person who had it before, since I didn't have a phone and he had it on a two year contract. That two year contract ended months ago and he renewed it for another two years.  Everything had been working pretty well except crappy reception at my house every now and then, since I live in the middle of nowhere.  But where my problem comes in is, for the past few days I haven't been able to send or recieve texts or calls at all. It just keeps saying failed to send when I try to send a text, and it won't receive any texts.  When I try to make a call, it goes to a couple different weird recording things trying to ask what type of call I'm making, or saying the connection can't be made. I can't recieve calls at all.  I have no idea why this happened, it was really random, and I'm very frusterated.  It always shows my phone having two or three bars and service, more than enough to do these things, but for some reason it's ike it's become disconnected.  This type of thing happened a few weeks ago, but only for a few hours and then I started getting all my texts and whatnot and it went back to normal.  But now it's lasted almost a week.  I have Sprint and even when it shows me having 3G service and all bars, it won't send or recieve calls or texts.  I tried resetting network settings, and that didn't change or fix anything.  I've also tried shutting it off and turning it back on multiple times and the whole airplane mode on and off thing and NOTHING is working.  If any of you could help, or offer suggestions, that'd be awesome. Much appreciated!

    I'll have to use somebody else's phone for the call, but I was thinking maybe that's my last option. :/  Thanks!

Maybe you are looking for

  • Win 7 64 bit, office 2010 64bit, acrobat 9.5.4 / pdfmaker does not show up in office apps

    I do not get the Adobe add-in in any of the office apps, nor do I get the covert to pdf or combine pdf selections when I get the menu from using the right click on the file. I did used to get these options. I have done a repair, I have also tried the

  • Remove message attributes from the message

    Hello I use FM RRMS_MESSAGE_HANDLING to generate a mesage in SAP BI. mesage number is 000, mesage class BRAIN , message type I System generates the following message : I : BRAIN : 000 : Mesage text How is it possible toget rid of I : BRAIN : 000? tha

  • Executing javascript command in jsp method

    here's the situation....           I have a jsp page with three buttons at the bottom. One button reads           "Save and Continue", another reads "Save and Quit" and the third reads           "Quit". OnClick the page executes a java method that do

  • IPhone 4 crashing after iOS 6 update (low memory)

    After updating my iOS 6 update on a iPhone 4 the system is crashing every time I use an app. I´ve already tried to reset all apps and it still remais to crash. Have you any idea of what should I do to solve this.

  • ORACLE HRMS : How to make an EIT ReadOnly

    I have made an EIT, i want that X reponsiblity should be able to view the EIT but should not be allowed to update / delete. how can this be done. can anyone elaborate the steps.