TREX 7 sapinst -- instance number error
Dear Portal&TREX specialists,
We are implementing a TREX 7 on SunSolaris 10. During the installation we get the following error message:
„A SAP Instance is already in use. Enter another instance number for the new TREX instance.“
Do you know a solution where this „old“ instance number is saved? We don’t have the possibilty to choose an other instance number. Before this installation we had remove/deinstalled the old TREX instance and the old TREX instance had this number, that is shown in the error message of sapinst.
Thanks.
Önder
hi Onder
well for this situation
i will ask u to format ur system after deinstallation of any SAP components; then install it on fresh system
second option is; goto Run--> regedit.exe
goto HKEY_LOCAL_MACHINE >SYSTEM> CurrentControlSet --> Services --> goto old SAP installation delete it
then
goto HKEY_LOCAL_MACHINE -->SOFTWARE --> goto old SAP installation delete it
goto programs files\<delete any SAP related folder>
restart the systems
start ur installation again
this will do !!!
cheers
shoeb
Similar Messages
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Dialog instance installation error
Hi all,
While installing a dialog instance of ECC (EHP 5 for SAP ERP 6.0) on AIX 7.1 I am facing an error in phase "Unpack SAP archives"
the error is as under
An error occurred while processing option Enhancement Package 5 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > High-Availability System > Dialog Instance( Last error reported by the step :System call failed. Error 13 (Permission denied) in execution of system call 'mkdir' with parameter (/sapmnt/<SID>/exe/.created_by_SAPinst, S_IRWXU | S_IRWXG | S_IRWXO), line (393) in file (syuxcpath.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript() iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall() syxxcfsmgt.cpp: 542: CSyFileSystemMgtImpl::createDirectory(/usr/sap/<SID>/SYS/exe/run/.created_by_SAPinst) syuxcpath.cpp: 380: CSyPath::createDirectory() .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/HA/DI.
files systems
/sapmnt/SID/ is NFS mounted with full permission and sidadm:sapsys as owner
/usr/sap has permission 777
Umask is set to 022
/etc/exports of the CI node is properly maintained
Kindly suggest
SandeepHi,
System call failed. Error 13 (Permission denied) in execution of system call 'mkdir' with parameter (/sapmnt/<SID>/exe/.created_by_SAPinst
SAPinst is unable to create a directory exe under /sapmnt/<SID>
Could you run the following commands
chmod -R 777 /sapmnt/<SID>
chown -R <sidadm>:sapsys /sapmnt/<SID>
Retry after these changes.
Regards,
Deepak Kori -
*** Instance Number already in use. ***
Hi,
if I start my oracle collaboration suite services, I get the following message after "Starting the Monitor process.":
*** Instance Number already in use. ***
*** Please try a different Instance number. ***
Why?
And after this (ldapcheck):
Checking Oracle Internet Directory Processes ...
Process oidmon is Alive as PID 3928
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
opmnctl: opmn started
opmnctl: starting opmn managed processes...
opmnctl: starting opmn managed processes...
Request failure -- 0 of 1 processes started. < WHAT? WHY?
to be continued...:
### midtier.sh ###
ORACLE_HOME=/opt/oracle/mid
TNS_ADMIN=/opt/oracle/mid/network/admin
### midstart ###
#### opmnctl start: ####
opmnctl: starting opmn and all managed processes...
Request partial success -- 2 of 9 processes started. < WHAT? WHY?
And unistart-errors:
/opt/oracle/mid
#### unistart : ####
unistart: Oracle Calendar Server 9.0.4
unistart: Copyright (c) 1993, 2003, Oracle.
unistart: All rights reserved.
unistart:
unistart: unicheck working, please wait ...
unistart: Starting the Calendar Directory Access Server
unistart [error]: Error starting the Calendar Directory Access Server
unistart [error]: More details can be found in '/opt/oracle/mid/ocal/log/unistart.log'
unistart [error]: and in '/opt/oracle/mid/ocal/log/das.log'.
UM processes startup
starting smtp_in ...
oracle.mail.OESException: oracle.mail.ldap.ESDSException: [ESDS error code - 10041] Anderer Fehler. Weitere Informationen hierzu finden Sie in der Fehlermeldung
Unable to connect to Directory Server
oracle.ias.repository.schema.SchemaException: Unable to connect to Directory Server
Keine Prozesse definiert fuer host.domain.tld :um_system:smtp_in
and so on with nntp, imap, gc, list, pop, vs.
Help me!
OlliThanks!
But:
1. hm, ok, as user oracle and in the path /opt/oracle/infra/opmn/bin
I found it... ./opmnctl stopall
2. ps -efw | grep oracle | more
oracle 12633 1 0 14:08 pts/0 00:00:00 /opt/oracle/infra/bin/tnslsnr listener -inherit
oracle 12637 1 0 14:08 ? 00:00:00 ora_pmon_iasdb
oracle 12639 1 0 14:08 ? 00:00:00 ora_dbw0_iasdb
oracle 12641 1 0 14:08 ? 00:00:00 ora_lgwr_iasdb
oracle 12643 1 0 14:08 ? 00:00:00 ora_ckpt_iasdb
oracle 12645 1 0 14:08 ? 00:00:00 ora_smon_iasdb
oracle 12647 1 0 14:08 ? 00:00:00 ora_reco_iasdb
oracle 12649 1 0 14:08 ? 00:00:00 ora_s000_iasdb
oracle 12651 1 0 14:08 ? 00:00:00 ora_d000_iasdb
oracle 12653 1 0 14:08 ? 00:00:00 ora_d001_iasdb
oracle 12659 1 0 14:08 pts/0 00:00:00 ./oidmon connect=iasdb start
oracle 12662 1 0 14:08 pts/0 00:00:00 oracleiasdb (LOCAL=NO)
oracle 12936 1 0 14:10 pts/0 00:00:00 /opt/oracle/storage/bin/tnslsnr storage -inherit
oracle 12940 1 0 14:10 ? 00:00:00 ora_pmon_storage
oracle 12942 1 0 14:10 ? 00:00:00 ora_dbw0_storage
oracle 12944 1 0 14:10 ? 00:00:00 ora_lgwr_storage
oracle 12946 1 0 14:10 ? 00:00:00 ora_ckpt_storage
oracle 12948 1 0 14:10 ? 00:00:00 ora_smon_storage
oracle 12950 1 0 14:10 ? 00:00:00 ora_reco_storage
oracle 12952 1 0 14:10 ? 00:00:00 ora_cjq0_storage
oracle 12954 1 0 14:10 ? 00:00:01 ora_qmn0_storage
oracle 12956 1 0 14:10 ? 00:00:00 ora_s000_storage
oracle 12958 1 0 14:10 ? 00:00:00 ora_d000_storage
oracle 12970 1 0 14:10 ? 00:00:05 ora_j003_storage
oracle 12980 1 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12982 12980 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12984 12982 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12985 12984 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
and many more ...
3. How????????????
4. ?
5. - -
Substitute Function in Excel: Replace text with instance number in BO
Hi,
I have a column where data is merged from three other columns each text separated by "-". Ex: Services - Phoneline - New Customer.
What I wanted to do is to just get the last text which is "New Customer" separated. I used "Length(<columnValue>)-Length(Replace(<columnValue),"-",""))" to get the number of instances of "-" in the text as it varies from 1 to 3.
I use to do it in excel using substitute function where I have the facillity to use the character instance number. I don't know how to do this in Business objects.
Please help...
ThanksDDann wrote:
=SUMIF('New Req to Capability Mapping'!$D$2:$D$148,A2,'New Req to Capability Mapping'!$I$2:$I$148)
Col A is a list of the capabilities and the formulas are in COL B of this sheet. [....] The problem that I am experiencing is that for some of the capabilities I am see correct count totals for some while others are not for instance, "Account
Management" shows correct while "Security Awareness Program" is not. I have copied the text for each of the capabilities from the main sheet into Col A to reduce keystroke errors. I have also copied those strings into some of the problematic
formulas instead of using the cell address to see if the results change.
Good troubleshooting techniques. Unless someone gets lucky with a wild guess, I suspect we cannot help without having the workbook to see the situation for ourselves.
You can upload an example Excel file (devoid of any private data) that demonstrates the problem to a file-sharing website.
Then post the "shared", "public" or "view-only" link (aka URL; http://...) in a response here.
The following is a list of some free file-sharing websites; or use your own.
Box.Net: http://www.box.net/files
Windows Live Skydrive: http://skydrive.live.com
MediaFire: http://www.mediafire.com
FileFactory: http://www.filefactory.com
FileSavr: http://www.filesavr.com
RapidShare: http://www.rapidshare.com
I suspect that the problem has to do with either a mismatch in spacing or the presence of non-breaking spaces (HTML  ) or other non-printing characters, notwithstanding your efforts to eliminate that possibility with your copy-and-paste experiments. -
Installation of Dialog Instance (DI) - Error during installation...
Hello gurus,
System: SAP ECC 6.0 SR3 (ABAP+JAVA) -- Central Instance (CI)
Database: MS SQL Server 2008
Operation System: Windows Server 2003 X64
I´m trying to install a Dialog Instance (DI) but during the SAPInst I´m faccing with an error!
First at all I made some things/requirements in this new server like:
- Install J2SDK;
- Set Swap space (20 Gb);
- Install SQL Server 2008 x64.
So, after that, I run SAPInst with the following option: "SAP ERP 6.0 Support Release 3 --> Software Life-Cycle Options --> Application Server --> MS SQL Server --> Dialog Instance"
The error is on the screen "MS SQL Server --> Database Connection Information" when I put in field "Database Instance" the value (in my case I write PTREPRDPRD which are the hostname of CI server and the sap instance PRD), after I typing the button "Next" it shown a message error which say:
"Cannot connect to PTREPRDPRD Error(s) returned: SQL Server does not exist or access denied. SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it."
Can you help me how to resolve this problem!??
Kind regards,
Joao Dimas - PortugalHello Javed,
Here you have it, sapinst_dev log:
TRACE 2010-07-26 13:21:49.582 [iaxxgenimp.cpp:360]
CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<title>MS SQL Server > Database Connection Information</title>
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD</value>
</field>
<dialog/>
TRACE 2010-07-26 13:21:49.582 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2010-07-26 13:21:57.379 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2010-07-26 13:21:57.379 [iaxxcdialogdoc.cpp:212]
CDialogDocument::submit()
<dialog sid="diMssLoginWINOnly">
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD\PRD</value>
</field>
<dialog/>
TRACE 2010-07-26 13:21:57.395
Call block:MssLoginInfo_ind_ind_ind_ind
function:MssLoginInfo_ind_ind_ind_ind_DialogPhase_dAskForConnectionValidator_default
is validator: true
TRACE 2010-07-26 13:21:57.395
t_MssLogin.remove(WHERE Key='std')
TRACE 2010-07-26 13:21:57.395
t_MssLogin.insertRow({
Key:std
Host:PTRESAPPRD\PRD
LoginType:WIN
}), inserting
TRACE 2010-07-26 13:21:57.395
MSSTRC: odbc driver is installed.
TRACE 2010-07-26 13:21:57.395
t_MssMessages.remove(WHERE 1=1)
TRACE 2010-07-26 13:22:13.426
Cannot connect to PTRESAPPRD\PRD
SQL Server does not exist or access denied.
TRACE 2010-07-26 13:22:13.457 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Cannot connect to PTRESAPPRD\PRD<br>Error(s) returned:<br>SQL Server does not exist or access denied.
<br>SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it. </body></html>
TRACE 2010-07-26 13:22:13.457 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2010-07-26 13:22:22.973 [iaxxdlghnd.cpp:204]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE 2010-07-26 13:22:22.973 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2010-07-26 13:22:42.410 [iaxxdlghnd.cpp:82]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_PREV requested
TRACE 2010-07-26 13:22:42.410 [iaxxgenimp.cpp:368]
CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<dialog/>
TRACE 2010-07-26 13:22:42.442
The step dAskForConnection with key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0 has been executed successfully.
WARNING 2010-07-26 13:22:13.426
lib=iamodmssql module=CIaNtMssDmo
Cannot connect to the database server. Errors returned: [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
Call your SAP Support.
INFO 2010-07-26 13:22:42.489 [sixxcstepexecute.cpp:781]
Execute step dCheckGivenServer of component |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0 -
J2EE start fails after changing the instance-number
Hi,
we installed a SCS with instance number 41. After a few weeks it was necessary to change it to 44. We changed all property-files and the profiles.
The SCS started fine, but the J2EE-Server failed starting.
In dev_server0 is still a line with the former port 3241:
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx_mt. 841]
I thought I changed everything from 41 to 44. Does someone have an idea, which I forgot? Thank you for help.
Here you can see the whole dev_server0:
trc file: "/usr/sap/SM1/DVEBMGS40/work/dev_server0", trc level: 1, release: "700"
node name : ID401326950
pid : 29093
system name : SM1
system nr. : 40
started at : Tue May 22 14:51:09 2007
arguments :
arg[00] : /usr/sap/SM1/DVEBMGS40/exe/jlaunch
arg[01] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[02] : -DSAPINFO=SM1_40_server
arg[03] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=60030
arg[06] : -DSAPSYSTEM=40
arg[07] : -DSAPSYSTEMNAME=SM1
arg[08] : -DSAPMYNAME=sm1-ci_SM1_40
arg[09] : -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 182906379008] Tue May 22 14:51:09 2007
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.box.number=SM1DVEBMGS40sm1-ci] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.host=sm1-scs] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.system.id=40] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties]
-> ms host : sm1-scs
-> ms port : 3944
-> OS libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Instance properties
-> ms host : sm1-scs
-> ms port : 3944
-> os libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] bootstrap_ID40132690 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [02] bootstrap_ID40132695 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID401326900 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] ID401326950 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
[Thr 182906379008] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 182906379008] JLaunchRequestQueueInit: create pipe listener thread
[Thr 1074792800] JLaunchRequestFunc: Thread 1074792800 started as listener thread for np messages.
[Thr 1076894048] WaitSyncSemThread: Thread 1076894048 started as semaphore monitor thread.
[Thr 182906379008] SigISetDefaultAction : default handling for signal 17
[Thr 182906379008] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 182906379008] CPIC (version=700.2006.09.13)
[Thr 182906379008] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048M [jstartxx_mt. 2604]
[Thr 182906379008] [Node: server0] java home is set by profile parameter
Java Home: /usr/lib/java
[Thr 182906379008] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
JStartupIReadSection: read node properties [ID401326950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/lib/java
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Xmn400M -Xgcpolicy:gencon -Xtrace -Xsoftrefthreshold0
-> java vm version : J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20060428 (JIT enabled)
-> java vm vendor : IBM J9SE VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : amd64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 54021
-> shutdown timeout : 120000
[Thr 182906379008] JLaunchISetDebugMode: set debug mode [no]
[Thr 1077946720] JLaunchIStartFunc: Thread 1077946720 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 11]: -Xmn400M
-> arg[ 12]: -Xgcpolicy:gencon
-> arg[ 13]: -Xtrace
-> arg[ 14]: -Xsoftrefthreshold0
-> arg[ 15]: -Dsys.global.dir=/usr/sap/SM1/SYS/global
-> arg[ 16]: -Dapplication.home=/usr/sap/SM1/DVEBMGS40/exe
-> arg[ 17]: -Djava.class.path=/usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> arg[ 18]: -Djava.library.path=/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/tmp/sapinst_exe.7551.1151567769:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib:/usr/lib:/usr/sap/SM1/DVEBMGS40/j2ee/os_libs:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib
-> arg[ 19]: -Dmemory.manager=2048M
-> arg[ 20]: -Xmx2048M
-> arg[ 21]: -Xms2048M
-> arg[ 22]: -DLoadBalanceRestricted=no
-> arg[ 23]: -Djstartup.mode=JCONTROL
-> arg[ 24]: -Djstartup.ownProcessId=29093
-> arg[ 25]: -Djstartup.ownHardwareId=X1817543257
-> arg[ 26]: -Djstartup.whoami=server
-> arg[ 27]: -Djstartup.debuggable=no
-> arg[ 28]: -DSAPINFO=SM1_40_server
-> arg[ 29]: -DSAPSTART=1
-> arg[ 30]: -DCONNECT_PORT=60030
-> arg[ 31]: -DSAPSYSTEM=40
-> arg[ 32]: -DSAPSYSTEMNAME=SM1
-> arg[ 33]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 34]: -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
-> arg[ 35]: -DFRFC_FALLBACK=ON
-> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 37]: -DSAPSTARTUP=1
-> arg[ 38]: -DSAPSYSTEM=40
-> arg[ 39]: -DSAPSYSTEMNAME=SM1
-> arg[ 40]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 41]: -DSAPDBHOST=sm1-db
-> arg[ 42]: -Dj2ee.dbhost=sm1-db
[Thr 1077946720] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1082288480] Tue May 22 14:51:13 2007
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 1082288480] JLaunchISetClusterId: set cluster id 401326950
[Thr 1094003040] Tue May 22 14:54:13 2007
[Thr 1094003040] JLaunchIExitJava: exit hook is called (rc = -337)
[Thr 1094003040] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 1094003040] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1094003040] JLaunchCloseProgram: good bye (exitcode = -337)
trc file: "/usr/sap/SM1/DVEBMGS40/work/dev_server0", trc level: 1, release: "700"
node name : ID401326950
pid : 30385
system name : SM1
system nr. : 40
started at : Tue May 22 14:54:15 2007
arguments :
arg[00] : /usr/sap/SM1/DVEBMGS40/exe/jlaunch
arg[01] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[02] : -DSAPINFO=SM1_40_server
arg[03] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=60030
arg[06] : -DSAPSYSTEM=40
arg[07] : -DSAPSYSTEMNAME=SM1
arg[08] : -DSAPMYNAME=sm1-ci_SM1_40
arg[09] : -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 182906379008] Tue May 22 14:54:15 2007
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.box.number=SM1DVEBMGS40sm1-ci] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.host=sm1-scs] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.system.id=40] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties]
-> ms host : sm1-scs
-> ms port : 3944
-> OS libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Instance properties
-> ms host : sm1-scs
-> ms port : 3944
-> os libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] bootstrap_ID40132690 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [02] bootstrap_ID40132695 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID401326900 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] ID401326950 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
[Thr 182906379008] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 182906379008] JLaunchRequestQueueInit: create pipe listener thread
[Thr 1074792800] JLaunchRequestFunc: Thread 1074792800 started as listener thread for np messages.
[Thr 1076894048] WaitSyncSemThread: Thread 1076894048 started as semaphore monitor thread.
[Thr 182906379008] SigISetDefaultAction : default handling for signal 17
[Thr 182906379008] Tue May 22 14:54:16 2007
[Thr 182906379008] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 182906379008] CPIC (version=700.2006.09.13)
[Thr 182906379008] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048M [jstartxx_mt. 2604]
[Thr 182906379008] [Node: server0] java home is set by profile parameter
Java Home: /usr/lib/java
[Thr 182906379008] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
JStartupIReadSection: read node properties [ID401326950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/lib/java
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Xmn400M -Xgcpolicy:gencon -Xtrace -Xsoftrefthreshold0
-> java vm version : J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20060428 (JIT enabled)
-> java vm vendor : IBM J9SE VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : amd64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 54021
-> shutdown timeout : 120000
[Thr 182906379008] JLaunchISetDebugMode: set debug mode [no]
[Thr 1077946720] JLaunchIStartFunc: Thread 1077946720 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 11]: -Xmn400M
-> arg[ 12]: -Xgcpolicy:gencon
-> arg[ 13]: -Xtrace
-> arg[ 14]: -Xsoftrefthreshold0
-> arg[ 15]: -Dsys.global.dir=/usr/sap/SM1/SYS/global
-> arg[ 16]: -Dapplication.home=/usr/sap/SM1/DVEBMGS40/exe
-> arg[ 17]: -Djava.class.path=/usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> arg[ 18]: -Djava.library.path=/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/tmp/sapinst_exe.7551.1151567769:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib:/usr/lib:/usr/sap/SM1/DVEBMGS40/j2ee/os_libs:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib
-> arg[ 19]: -Dmemory.manager=2048M
-> arg[ 20]: -Xmx2048M
-> arg[ 21]: -Xms2048M
-> arg[ 22]: -DLoadBalanceRestricted=no
-> arg[ 23]: -Djstartup.mode=JCONTROL
-> arg[ 24]: -Djstartup.ownProcessId=30385
-> arg[ 25]: -Djstartup.ownHardwareId=X1817543257
-> arg[ 26]: -Djstartup.whoami=server
-> arg[ 27]: -Djstartup.debuggable=no
-> arg[ 28]: -DSAPINFO=SM1_40_server
-> arg[ 29]: -DSAPSTART=1
-> arg[ 30]: -DCONNECT_PORT=60030
-> arg[ 31]: -DSAPSYSTEM=40
-> arg[ 32]: -DSAPSYSTEMNAME=SM1
-> arg[ 33]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 34]: -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
-> arg[ 35]: -DFRFC_FALLBACK=ON
-> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 37]: -DSAPSTARTUP=1
-> arg[ 38]: -DSAPSYSTEM=40
-> arg[ 39]: -DSAPSYSTEMNAME=SM1
-> arg[ 40]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 41]: -DSAPDBHOST=sm1-db
-> arg[ 42]: -Dj2ee.dbhost=sm1-db
[Thr 1077946720] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1082288480] Tue May 22 14:54:18 2007
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 1082288480] JLaunchISetClusterId: set cluster id 401326950
[Thr 1077946720] Tue May 22 15:09:19 2007
[Thr 1077946720] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1077946720] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1077946720] JLaunchCloseProgram: good bye (exitcode = 0)
trc file: "/usr/sap/SM1/DVEBMGS40/work/dev_server0", trc level: 1, release: "700"
node name : ID401326950
pid : 31835
system name : SM1
system nr. : 40
started at : Tue May 22 15:09:21 2007
arguments :
arg[00] : /usr/sap/SM1/DVEBMGS40/exe/jlaunch
arg[01] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[02] : -DSAPINFO=SM1_40_server
arg[03] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=60030
arg[06] : -DSAPSYSTEM=40
arg[07] : -DSAPSYSTEMNAME=SM1
arg[08] : -DSAPMYNAME=sm1-ci_SM1_40
arg[09] : -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 182906379008] Tue May 22 15:09:21 2007
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.box.number=SM1DVEBMGS40sm1-ci] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.host=sm1-scs] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.system.id=40] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties]
-> ms host : sm1-scs
-> ms port : 3944
-> OS libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Instance properties
-> ms host : sm1-scs
-> ms port : 3944
-> os libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] bootstrap_ID40132690 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [02] bootstrap_ID40132695 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID401326900 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] ID401326950 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
[Thr 182906379008] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 182906379008] JLaunchRequestQueueInit: create pipe listener thread
[Thr 1074792800] JLaunchRequestFunc: Thread 1074792800 started as listener thread for np messages.
[Thr 1076894048] WaitSyncSemThread: Thread 1076894048 started as semaphore monitor thread.
[Thr 182906379008] SigISetDefaultAction : default handling for signal 17
[Thr 182906379008] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 182906379008] CPIC (version=700.2006.09.13)
[Thr 182906379008] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048M [jstartxx_mt. 2604]
[Thr 182906379008] [Node: server0] java home is set by profile parameter
Java Home: /usr/lib/java
[Thr 182906379008] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
JStartupIReadSection: read node properties [ID401326950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/lib/java
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Xmn400M -Xgcpolicy:gencon -Xtrace -Xsoftrefthreshold0
-> java vm version : J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20060428 (JIT enabled)
-> java vm vendor : IBM J9SE VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : amd64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 54021
-> shutdown timeout : 120000
[Thr 182906379008] JLaunchISetDebugMode: set debug mode [no]
[Thr 1077946720] JLaunchIStartFunc: Thread 1077946720 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 11]: -Xmn400M
-> arg[ 12]: -Xgcpolicy:gencon
-> arg[ 13]: -Xtrace
-> arg[ 14]: -Xsoftrefthreshold0
-> arg[ 15]: -Dsys.global.dir=/usr/sap/SM1/SYS/global
-> arg[ 16]: -Dapplication.home=/usr/sap/SM1/DVEBMGS40/exe
-> arg[ 17]: -Djava.class.path=/usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> arg[ 18]: -Djava.library.path=/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/tmp/sapinst_exe.7551.1151567769:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib:/usr/lib:/usr/sap/SM1/DVEBMGS40/j2ee/os_libs:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib
-> arg[ 19]: -Dmemory.manager=2048M
-> arg[ 20]: -Xmx2048M
-> arg[ 21]: -Xms2048M
-> arg[ 22]: -DLoadBalanceRestricted=no
-> arg[ 23]: -Djstartup.mode=JCONTROL
-> arg[ 24]: -Djstartup.ownProcessId=31835
-> arg[ 25]: -Djstartup.ownHardwareId=X1817543257
-> arg[ 26]: -Djstartup.whoami=server
-> arg[ 27]: -Djstartup.debuggable=no
-> arg[ 28]: -DSAPINFO=SM1_40_server
-> arg[ 29]: -DSAPSTART=1
-> arg[ 30]: -DCONNECT_PORT=60030
-> arg[ 31]: -DSAPSYSTEM=40
-> arg[ 32]: -DSAPSYSTEMNAME=SM1
-> arg[ 33]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 34]: -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
-> arg[ 35]: -DFRFC_FALLBACK=ON
-> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 37]: -DSAPSTARTUP=1
-> arg[ 38]: -DSAPSYSTEM=40
-> arg[ 39]: -DSAPSYSTEMNAME=SM1
-> arg[ 40]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 41]: -DSAPDBHOST=sm1-db
-> arg[ 42]: -Dj2ee.dbhost=sm1-db
[Thr 1077946720] Tue May 22 15:09:22 2007
[Thr 1077946720] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1082288480] Tue May 22 15:09:24 2007
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 1082288480] JLaunchISetClusterId: set cluster id 401326950
[Thr 1077946720] Tue May 22 15:24:25 2007
[Thr 1077946720] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1077946720] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1077946720] JLaunchCloseProgram: good bye (exitcode = 0)
trc file: "/usr/sap/SM1/DVEBMGS40/work/dev_server0", trc level: 1, release: "700"
node name : ID401326950
pid : 32545
system name : SM1
system nr. : 40
started at : Tue May 22 15:24:27 2007
arguments :
arg[00] : /usr/sap/SM1/DVEBMGS40/exe/jlaunch
arg[01] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[02] : -DSAPINFO=SM1_40_server
arg[03] : pf=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=60030
arg[06] : -DSAPSYSTEM=40
arg[07] : -DSAPSYSTEMNAME=SM1
arg[08] : -DSAPMYNAME=sm1-ci_SM1_40
arg[09] : -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 182906379008] Tue May 22 15:24:27 2007
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.box.number=SM1DVEBMGS40sm1-ci] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.host=sm1-scs] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx_mt. 841]
[Thr 182906379008] *** WARNING => INFO: Unknown property [instance.system.id=40] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties]
-> ms host : sm1-scs
-> ms port : 3944
-> OS libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Instance properties
-> ms host : sm1-scs
-> ms port : 3944
-> os libs : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] bootstrap_ID40132690 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [02] bootstrap_ID40132695 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID401326900 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
-> [01] ID401326950 : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/instance.properties
[Thr 182906379008] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 182906379008] JLaunchRequestQueueInit: create pipe listener thread
[Thr 1074792800] JLaunchRequestFunc: Thread 1074792800 started as listener thread for np messages.
[Thr 1076894048] WaitSyncSemThread: Thread 1076894048 started as semaphore monitor thread.
[Thr 182906379008] SigISetDefaultAction : default handling for signal 17
[Thr 182906379008] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 182906379008] CPIC (version=700.2006.09.13)
[Thr 182906379008] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048M [jstartxx_mt. 2604]
[Thr 182906379008] [Node: server0] java home is set by profile parameter
Java Home: /usr/lib/java
[Thr 182906379008] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
JStartupIReadSection: read node properties [ID401326950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/lib/java
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -verbose:gc -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Xmn400M -Xgcpolicy:gencon -Xtrace -Xsoftrefthreshold0
-> java vm version : J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20060428 (JIT enabled)
-> java vm vendor : IBM J9SE VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : amd64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/SM1/DVEBMGS40/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/SM1/DVEBMGS40/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 54021
-> shutdown timeout : 120000
[Thr 182906379008] JLaunchISetDebugMode: set debug mode [no]
[Thr 1077946720] JLaunchIStartFunc: Thread 1077946720 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 8]: -Djco.jarm=1
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 11]: -Xmn400M
-> arg[ 12]: -Xgcpolicy:gencon
-> arg[ 13]: -Xtrace
-> arg[ 14]: -Xsoftrefthreshold0
-> arg[ 15]: -Dsys.global.dir=/usr/sap/SM1/SYS/global
-> arg[ 16]: -Dapplication.home=/usr/sap/SM1/DVEBMGS40/exe
-> arg[ 17]: -Djava.class.path=/usr/sap/SM1/DVEBMGS40/exe/jstartup.jar:/usr/sap/SM1/DVEBMGS40/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> arg[ 18]: -Djava.library.path=/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/tmp/sapinst_exe.7551.1151567769:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib:/usr/lib:/usr/sap/SM1/DVEBMGS40/j2ee/os_libs:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/DVEBMGS40/exe:/usr/sap/SM1/SYS/exe/run:/sapdb/programs/lib
-> arg[ 19]: -Dmemory.manager=2048M
-> arg[ 20]: -Xmx2048M
-> arg[ 21]: -Xms2048M
-> arg[ 22]: -DLoadBalanceRestricted=no
-> arg[ 23]: -Djstartup.mode=JCONTROL
-> arg[ 24]: -Djstartup.ownProcessId=32545
-> arg[ 25]: -Djstartup.ownHardwareId=X1817543257
-> arg[ 26]: -Djstartup.whoami=server
-> arg[ 27]: -Djstartup.debuggable=no
-> arg[ 28]: -DSAPINFO=SM1_40_server
-> arg[ 29]: -DSAPSTART=1
-> arg[ 30]: -DCONNECT_PORT=60030
-> arg[ 31]: -DSAPSYSTEM=40
-> arg[ 32]: -DSAPSYSTEMNAME=SM1
-> arg[ 33]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 34]: -DSAPPROFILE=/usr/sap/SM1/SYS/profile/SM1_DVEBMGS40_sm1-ci
-> arg[ 35]: -DFRFC_FALLBACK=ON
-> arg[ 36]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 37]: -DSAPSTARTUP=1
-> arg[ 38]: -DSAPSYSTEM=40
-> arg[ 39]: -DSAPSYSTEMNAME=SM1
-> arg[ 40]: -DSAPMYNAME=sm1-ci_SM1_40
-> arg[ 41]: -DSAPDBHOST=sm1-db
-> arg[ 42]: -Dj2ee.dbhost=sm1-db
[Thr 1077946720] Tue May 22 15:24:28 2007
[Thr 1077946720] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 1082288480] Tue May 22 15:24:30 2007
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 1082288480] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 1082288480] JLaunchISetClusterId: set cluster id 401326950
[Thr 1077946720] Tue May 22 15:39:31 2007
[Thr 1077946720] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1077946720] SigISetIgnoreAction : SIG_IGN for signal 17
[Thr 1077946720] JLaunchCloseProgram: good bye (exitcode = 0)Werner,
First check the instance.properties file to see if it has picked up the change. You may need to change it there.
Also, these need to be changed in your default profile:
j2ee/scs/host = <host>
j2ee/scs/system = 44
j2ee/ms/port = 3944
Also, you have max heap specified twice, make sure this is only specified once by taking it out of the body of the java parameters. It can cause other problems being in there twice.
[Thr 182906379008] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048M [jstartxx_mt. 2604]
-jwise -
What instance number and config set number am I supposed to use for ODISRV?
I'm trying to get one way sync working from ADS to OID using the OID that comes with Collaboration Suite 10.1.2 on Windows. The sync works fine if I run it manually (I forget the command I used for that). I can see user accounts show up in the DIT. The problem is that the sync never happens on a scheduled basis and it looks like it is due to ODISRV not running even after I did what the docs said and attempted to start it. It started with no errors but I guess the log file contained all the actual errors.
The docs say to specify an instance number > 0 and a config set. Well, it's clear as mud as to which number to actually use. I assmed the configset value happened to match the nubmer in the Directory Manager GUI under the Integration Server entry (which was configset1 for me). I've tried to specify 1 2 and 3 for the instance numbers and I don't know what I'm supposed to use (and some of them are already being used so the command fails). How many instances are there running by default for ODISRV and how many for OID itself? What number should I be using based on that?
Here are some entries in my logs:
oidldap01s1304.log- OpName=search, duplicate while inserting in Hash Table.
My comment on that snippet is a duplicate what? and what the hell hash table is it trying to use? The info isn't helpful at all.
odisrv02.log- port 389/profile grp 999: registration failure, config set 1 already being executed by instance 0
odisrv01.log- port 636/profile default: config set 0 already being executed by instance 2.
oidmon.log - retry counts exceeded are listed for both odisrv01 and 02
In all those logs the those errors keep repeating. I don't need OID on port 636 so is there a way I can stop/delete that while I'm fixing the sync issue? I saw nothing in the OEM website that allowed me to remove the SSL configuration.
If I try stopping either instance 0 or 1 and try to restart I can't because the instance number is already used. What the hell am I supposed to do then? That means I can stop everything and not be able to start anything back up, does it not?
any ideas how to make sense of this mess oracle developed?There are two configsets by default. Configset 1 is
for synchronization and Configset 0 is used by
provisioning (again, these are default settings).
You cannot have two odisrv (Provisioning and Synch)
with the same instance #.
So, instance 1 could be Provisioning and instance 2
could be Synch.
Have you setup your synchronization mapping files?
I would suggest you use the DIPTester utility to
setup the synch. It might also be helpful to post the
commands and the odisrv* logs (not the full dump, but
the last snippet).Well I was trying to use ConfigSet 1 for synchronization but it either wouldn't let me because of how it is designed or I had screwed it up at that point since I didn't know what numbers to use for anything and it prevented me from using Set1 because of that. In the end I created a ConfigSet 2 and was able to get another instance of ODISRV running with that. That finally got the sync working on a scheduled basis. I'm now trying to get SSO working between OID and ADS and it seems that OID is too stupid to know that a user exists. I log onto the Windows PC into the domain and attempt to go to http://ssoServer.com:7778/pls/portal and login and I get an authorization denied message.
I have debugging turned on as much as I can and the defaultIsland log file (forget the full filename but its an OC4J file in $ORACLE_HOME\opmn\logs directory). It says that I was denied access because the user could not be found and yet I see the user in the directory tree and it comes back in a search as well. The krbprinicipalname, uid, and orclcommonprinicipalname (I think that's what it's called) are all the same ([email protected]) and the orclusersearchbase is set to dc=mycompany,dc=com so I don't know why the account can't be found.
ANy ideas on that issue? -
Ifconfig pcelx0 plumb fails with Bad file number error
Hi,
I installed solaris 8 (x86) on a Toshiba Tecra 8000.
The Tecra uses Neomagic NM2200 chipset for it's display.
Even though it is not supported by the Sun Drivers, getting xfree86 for sun fixed the display problem for me.
Now according to the various sources that guided me in this task seemed to point at a few things that I had to do in order to make the Tecra work okay with Solaris 8 :
1)Change the PCMCIA mode in the BIOS from automatic to PCIC mode
2)Make sure that there were no IRQ conflicts on the system.
3)Install the OS.
Once the OS was installed, I ran prtconf -D and saw that the network instance #0 pcelx0 was showing up under pcic.
I did not have to install the xig init-pcic patch.
But it did not create an entry in /devices or /dev (as a link) with the error
"pcelx0 requested IRQ failed 6".
Also, I suppose that is the reason why when pcelx0 is plumbed, it comes out with the error message:
ifconfig pcelx0 plumb : "bad file number"
Any help will be greatly appreciated.
Thanks,
Dwai.Thanks Alex,
I found out -
ifconfig adapter plumb will fail with Bad File number error when the device file that is being referred to is missing.
I checked and found that the pcelx link is not being made in the /dev directory and the file not created in /devices.
I also found that when /reconfigure is run, it tries to create the device for pcelx but fails with this eror message:
pcelx : RequestIRQ fail 6
I am assuming that there is some IRQ conflict with some other device.
Thanks,
Dwai. -
EHP4 on MSCS 2008 - PHASE KX_CPYORG - Instance number conflict
Hello Experts,
Need some help on EHP4 on MSCS 2008.
We are Installing EHP4 on ECC 6.0 Windows 2008 - MSCS cluster 2008 environment and facing a problem while instllation Step EXTRACTION and PHASE KX_CPYORG. We have successfully installed on Sandbox and Dev regions, but now as our QAS is a Cluster environment we believe it is causing the problem.
Below is the error log from E:\usr\sap\<SID>\EHPI\abap\log KX_CPYORG.txt
1 ETQ201 Entering upgrade-phase "KX_CPYORG" ("20101113145523")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '41', GwService = 'sapgw41'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=meq
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_mss_schema=meq
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '41', GwService = 'sapgw41'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399 default TPPARAM: DEFAULT.TPP
1 ETQ206 Executing pre-phase DB specific actions.
Some details of our system
- The ASCS instance number is installaed on the Cluster and no. is 40
- The Central Instance is installed on a separate standalone VM Server with Instance number 41.
- The EHPI is triggered on the Central instance on the VM.
- Error is throwing exactly after the step accepting the profiles (All three).
Also with this error the SAPup is completely failing and stopping the Installation with the below error.
======================================================
Unable to execute the SDT request ABAP operation revoke-extract on hostname chgva-sap-meq instance 41
Unable to determine if a revoke of the ABAP upgrade request ABAP is possible
Cannot check for revoke possibility
Tool died unexpectedly with
FATAL ERROR: Inconsistent system number in profile '41' != '40'
======================================================
Any suggestions/solutions in resolving the issue are appreciated.
Thanks
AjayHi,
It looks like there is some problem in reading profiles. Are all profiles present in profile directory (including ASCS and CI) ?
Also, make sure that while you select the system number of shadow instance then it should not be 40 and 41.
Thanks
Sunny -
How to change instance number on new SSM
Hi,
I just finished installing SSM4 on RHEL4/Oracle.
In sapinst I missed changing the default central instance number from 01 (I intended to make it 60).
Is there a procedure to change the instance number (SAPSYSTEM in profiles)?
Thanks.
Stephen S.There is an OSS Note how to change an InstanceID at OS level.
1) SAP profiles
2) start scripts
3) env. vars. files from SIDadm and oraSID
4) links at FS level -
How can I correlate an Java instance number with a server id?
I have 6 Web App Server running ABAP and the JAVA stacks. I can log into the Central Instance server and run /usr/sap/<SID>DVEBMSG00/j2ee/configtool/configtool.sh and bring up the GUI interface to "see" all the instances and their variables. I don't see an easy way to trace back the Java INSTANCE to the physical server's hostname.
Is there a central repository to correlate a Web App Server Java instance number to the actual hostid/hostname of the target server? I realize I can log into each Web App Server and look at the /usr/sap/<SID>D00/j2ee/cluster/instance.properties and find the Instance number, but I was wondering if this information was held in the SAP Central instance or SAP Database somewhere.Hi Timothy,
The instance ID used for the JAVA cluster is generated at installation time, and -amongst other things- takes into account the time it was generated. We installed two instances in parallel (on different hosts) and ended up with almost the same instance ID.
Because this can be very confusing, we asked SAP if this was changable - in theory it is only an ID which could be changed as long as it is updated on all places the identifier is stored - but SAP indicated that that is not possible, nor supported. We ended up with a diagram of the system architecture with all the identifiers on our desk.
Note that in the config tool - all instances are displayed with their system instance number. If you were to install a new system it might be usefull to install all instances with different instance numbers so you and distinguish more easily between them.
Hope this helps,
Cheers,
Walter -
How to find port number , when there will be different instance number ?
In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
ThanksHi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
<b>5<instance_no>00</b>
If your <b>instance number is 01</b> then the port number would be <b>50100</b>.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful. -
Case When Statement and ORA:01722 Invalid number error
Hi folks, I have posted this under another heading as well under E-business suite so apologies if some you have already seen it but I would really appreciate some help on this one. Any suggestions are most welcome.
We are trying to put together a calculation that returns the number of days absent an individual has had in a given time period. We need to cater for those absences that started before the period and are closed during it, absence that start during the period and end after it, and those that open and close within it.
The period is always a rolling 6 months from sysdate.
This is the calc we have come up with so far which works for some people but we get the invalid number error if the absence includes a half day - so 0.5, 1.5,etc.
This is probably over complicated but we are not techie at all so are learning as we go!
We are using the HRMS - Administration - Oracle Human Resources (Core) business area in 10G and the Absence Attendance and Person folders.
SUM(TO_NUMBER(NVL(( CASE WHEN Absence Attendance.Actual Start Date < TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') THEN ( CASE WHEN Absence Attendance."Actual End Date" > SYSDATE THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) END ) END ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( Absence Attendance.Duration Days ) END ) END ) END ) END ) END ),( DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") )),'999999990D00'))Hi,
It could be that this is because you are using SYSDATE which contains the time as a fraction rather than TRUNC(SYSDATE) which just contains the current time. It could be that your working_dates_between raises this error.
However, your formula is far more complicated than it needs to be.
Firstly, you want to look at the date window ADD_MONTHS(TRUNC(SYSDATE), -6) to TRUNC(SYSDATE). Then you want to look at the portion of the absence that falls in the date window. This is GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6)) to LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE)). You may need to add 1 to the absence end date because this is the last day of their absence rather than the date they return. It depends how you calculate the days between the start and end
date of the absence. You can create calculations for the start and end date of the absences within the 6 months time window. Create calculation AbsenceStart as
GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6))
and AbsenceEnd as
LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE))
Then you need to only pick up absence that a part of the absence in your 6 month date window. You can use a condition in the workbook or a condition in a case statement to do this. You then need to calculate the difference between these dates and SUM all the values.
SUM(CASE WHEN AbsenceEnd >= AbsenceStart THEN WORKING_DAYS_BETWEEN(AbsenceStart, AbsenceEnd) END)
That's it. Not so complicated after all.
Rod West -
Case When Statement and ORA:1722 Invalid number error
Sorry I posted this in the wrong forum - I have the answer now
Cheers
HELP!!!
We are trying to put together a calculation that returns the number of days absent an individual has had in a given time period. We need to cater for those absences that started before the period and are closed during it, absence that start during the period and end after it, and those that open and close within it.
The period is always a rolling 6 months from sysdate.
This is the calc we have come up with so far which works for some people but we get the invalid number error if the absence includes a half day - so 0.5, 1.5,etc.
This is probably over complicated but we are not Techie at all so are learning as we go! We are using the HRMS - Administration - Oracle Human Resources (Core) business area in 10G and the Absence Attendance and Person folders.
SUM(TO_NUMBER(NVL(( CASE WHEN Absence Attendance.Actual Start Date < TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') THEN ( CASE WHEN Absence Attendance."Actual End Date" > SYSDATE THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) END ) END ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( Absence Attendance.Duration Days ) END ) END ) END ) END ) END ),( DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") )),'999999990D00'))
Edited by: CPearce on Sep 25, 2008 8:03 AMHi,
It could be that this is because you are using SYSDATE which contains the time as a fraction rather than TRUNC(SYSDATE) which just contains the current time. It could be that your working_dates_between raises this error.
However, your formula is far more complicated than it needs to be.
Firstly, you want to look at the date window ADD_MONTHS(TRUNC(SYSDATE), -6) to TRUNC(SYSDATE). Then you want to look at the portion of the absence that falls in the date window. This is GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6)) to LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE)). You may need to add 1 to the absence end date because this is the last day of their absence rather than the date they return. It depends how you calculate the days between the start and end
date of the absence. You can create calculations for the start and end date of the absences within the 6 months time window. Create calculation AbsenceStart as
GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6))
and AbsenceEnd as
LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE))
Then you need to only pick up absence that a part of the absence in your 6 month date window. You can use a condition in the workbook or a condition in a case statement to do this. You then need to calculate the difference between these dates and SUM all the values.
SUM(CASE WHEN AbsenceEnd >= AbsenceStart THEN WORKING_DAYS_BETWEEN(AbsenceStart, AbsenceEnd) END)
That's it. Not so complicated after all.
Rod West
Maybe you are looking for
-
Adobe CS2 Premium - How to I transfer my serial number from a PC that is broken to a new PC?
My old PC has died and I have loaded my Adobe CS2 Premium software onto my new computer. When I try to activate the serial number Adobe sends me a message that I can only activate the serial number on one computer. How can I change the serial number
-
The Windows support software could not be saved to the selected drive
I am trying to use bootcamp assistant to set up windows 7 on my 27" iMac (late 2013). I follow the instructions: select all the tasks in the 'select tasks' pane, then I choose the 32GB MS-DOS (FAT-32) flash drive that I am using and the windows 7 hom
-
An annoyance. I have a sysprep'd Windows 7 x64 Ghost image. Prior to creating the image my setup workstation's computer name is set to "win7image". My sysprep is configured so that all I have to do once I lay this image on another computer is to g
-
Printing 4x6 Photos in Adobe Photoshop Album Starter 3.0
Some time ago, I thought I downloaded a fix to this program to allow three 4x6 photographs to be printed on one page. I can't find this subject again. The problem is that although the Print Preview shows three 4x6 prints on a page, it actually prints
-
How to improve the performance of serialization/deserialization?
Hi, Friends, I have a question about how to improve the performance of serialization/deserialization. When an object is serialized, the entire tree of objects rooted at the object is also serialized. When it is deserialized, the tree is reconstructed