Tried restoring my iPhone 4s iTunes said it couldn't restore it and now iTunes won't recognize it and the screen is frozen on the plug into iTunes message
Tried restoring my iPhone 4s iTunes said it couldn't restore it and now iTunes won't recognize it and the screen is frozen on the plug into iTunes message
iOS: Unable to update or restore
Similar Messages
-
I can't turn my Ipad 2 on, It got the new update yesterday and has not turned on since. Please help
Have you tried restarting, resettng, and restoring as explained in the TS3281 article you attached?
-
I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.
probably need pc or mac update for ios 6 on your home device
-
The screen is frozen on the "connect to iTines" symbol. When I connect to Itunes it tells me to restore. Then it tells me that the download was corrupted.
Still frozen on the "connect to iTunes.Have you tried on another computer?
You can try putting the ipad into DFU mode.
DFU Mode
http://www.iclarified.com/entry/index.php?enid=1034 -
I recently reinstalled iTunes, and now it won't recognize my iphone so I'm not able to sync the phone with iTunes. How do I fix this?
It has been shown there are problems with the latest update of iTunes and Windows computers. What you need to do is remove and reinstall iTunes, and make sure that you follow the steps in this support document exactly. http://support.apple.com/kb/ht1923. If you do not follow them exactly, you will just compound your problems. Once you do this, you should have no trouble having the phone recognized in iTunes.
-
My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?
Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
I tried synching my phone to apply an update, but the screen has frozen with the itunes symbol. Is there a way I can unfreeze the screen, can anyone help please?
http://support.apple.com/kb/HT1808
-
iPod touch 3rd generation crashed while updating, and now it won't turn on, and it won't charge or be recognized in iTunes because it's completely dead; it's been dead for 3 days now. I've tried pressing home/sleep buttons for reset but nothing works, I've tried using different usb ports to charge it, but nothing seems to work. Please help asap. ...Thanks!(:
After charging the iPod for half an hour, see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents
I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.
-
Updated iTunes to 10.3.1 and now it won't recognize my iPod
I recently updated my iTunes to the latest version, and now it won't recognize any of my apple products. I have a first gen iPod touch, 4th gen. ipod nano and 5th gen. ipod nano. The ipod does work still, and is chargeable through a dock or a AC adapter. I've gone through all of the five Rs and reinstalled itunes, and nothing is working. My ipod won't show up in windows either. When I plug in my 5th gen nano, windows says the driver did not install sucessfully and itunes won't even acknowledge I've plugged it in. Any help would be fantastic, I'd really appreciate it. I put new music on my ipod all the time, and not being able to do so *****.
Well yesterday I finally broke down and called apple service... I spent $29 and 1.5 hours on the phone, but the operator was finally able to fix my ipod. There was an issue with the itunes update, and it had corrupted. After uninstalling, installing, and updating several drivers, programs, and resolving other issues, my iPod finally works. Even better, the operator gave me a way to contact him again if I am having issues, free of charge. I would have much rather fixed this myself without spending the additional money, but I'll admit there was no way I could've done what he did, as there were certain orders to uninstalling Apple programs. My advice? Bite the bullet and call. They will get your iPad working again. (:
-
Updated itunes and now it won't recognize my i4s
I updated my itunes to the newest version and now it won't recognize my ipods or my new 4s phone. What the heck??? HELP ME!!!
Windows or mac?
-
Slicked computer clean, downloaded itunes and now it won't recognize my ipod, says it is synced with another itunes library. It isn't. How do I fix this?
If no backup exists....
Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2 -
Updated to itunes 10.6.3 and now it won't recognize my iphone or ipad
Itunes updated to 10.6.3 and now it will not recognize my iPhone or iPad. I have tried uninstalling itunes and the amds following steps provided on the support site. Still nothing. My computer does show both as cameras though. Any ideas?
There has to be a fix without doing that.
You're not using any sort of hub or extender are you? iTunes doesn't always like that.
Tried different USB ports?
what operating system do you have? -
Have updated my iPhone 5c to iOS 8 and restored it and now it won't turn on. I have tried plugging it in even though I know it was fully charged, I have shut down my rebooted my computer and iTunes from scratch and reconnected my phone and still nothing, any ideas?
Hello Nikmuz,
It sounds like your screen is either black so it looks like it is not on, or it is just plain not turning on at all and it is also not being recognized in iTunes. I would recommend the followng troubleshooting from this article to help you determine whether that is the case or not, named:
iPhone: Hardware troubleshooting
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
While connected to the iPhone charger, try to reset the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
i cant get my replacement iphone to my itunes account
I am having the same problem, i got a replacement and now it wont show. My computer is saying windows isnt recognizing my phone, so i dont know if that has to do with anything if we have the same problem, i have windows 7
Maybe you are looking for
-
Downloading and installing podcast issues
The podcasts I try to download get to 100% downloaded and then I get a message that the podcast had an error downloading cancel or retry. It's been consistent. Anyone else having these issues?
-
Using a Counter as a start trigger to one or more tasks
I am using the NI USB-6251. I want to configure a counter (e.g. Dev1/ctr0) at a user-specified frequency and the rising edge on this counter should act as a start trigger for an analog input task and a digital output task. I've tried to do this by c
-
I have the shuffle option off on my iPhone 4 but when I listen to an album it does not play the songs in order. How do I stop this from happening?
-
Has anyone created a T43 version of Help Center for Productivi​ty Center?
Just curious. Running Windows Se7en Ultimate on a 2Gig T43 (2668) and everything works great. (The 40 Gig drive is half full, but when I can find a larger hard drive mfg. that doesn't give me 2010 error, then I'll upgrade. I know, lotsa luck with
-
Error startsap in AIX5.3
OS: AIX5.3TL9 While starting the SAP NetWeaver7.1 CE - Oracle(Distributed System) using the "startsap" after login as the user <System Id>_adm. We are getting the below mentioned error. Can anyone help me to resolve this problem. M [Thr 01] *** ERRO