Tried to charge my ipod nano plugged it into my computer now it's frozen . Have done several steps restarting computer, tried to restore ipod (but computer froze)
Tried to charge my nano ipod by plugging it into my computer, ipod froze with blank screen. Tried doing serveral steps restarting computer, restoring ipod, changing inputs. still blank screen.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Similar Messages
-
I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!
I'm sorry it's a nano 2gb silver
-
iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My ipod nano (7th gen) seems to be stuck in a loop of turning itself on and off, tried rebooting it but after a while it just starts it again?
Hi altofts,
Thanks for using Apple Support Communities. You can try resetting and restoring your iPod nano to see if that helps with the restart loop:
How to reset iPod
http://support.apple.com/kb/HT1320
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Cheers,
- Ari -
My iPod nano 5th generation got wet and now the backlight is so weak I can barley read anything on it. Also, it won't turn on unless it is plugged in (i.e. to a stero or my Mac), so I cant listen to it anywhere but in my house! Help!
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
What do I do if my iPod nano keeps syncing, resetting, and syncing and I cant add music to it? I've tried syncing my other iPod and that works just fine.
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
I have a new ipod nano to replace a previous one. I can't copy over my old playlists on to the new ipod. have tried selecting the playlists I want to sync but when I click sync , nothing happens
You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.
-
Why has the new ipod nano no connector for a speaker dock? The white blank at the bottom looks as if one was intended, but then there were design problems?
IKR! But u an order a connector that can plug nto any old speakers and then connect to your charger port and it will play music!
-
My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?
Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i -
I have just requested my ipod nano 1st generation to be replaced using the scheme, i have entered the wrong postcode on the shipping of the replacement box, will it still come to my address? or how can i change it?
Call up apple care, (08000480408 if you are in the UK) and ask them to change the postcode and request another replacement packet
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?
There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
B-rock -
My ipod nano 6th gen. is connected to my MacBook. I have an audio book on the MacBook in Itunes, and cannot load it into the Ipod. What am I doing wrong?
Is this audiobook configured to sync to your iPod via it's Books configuration pane in iTunes? Click on your iPod's device name under Devices in the left hand pane of iTunes. This will bring you to the Summary tab. Look for the Books tab along the top and click on it.
B-rock -
I keep getting the message sync complete but my ipod nano 3rd generation is not syncing, any ideas. I have used 3 different cables, reinstalled itunes to the latest version. My nano shows in the side bar of i tunes
There are instructions for starting it on this page : http://support.apple.com/kb/TS1567
-
Is there a way to download itunes 10? I only have OS X 10.4 and want to use my new ipod nano which needs at least itunes 10. I currently have 9.4
In order to run iTunes 10 you need OSX 10.5 or greater. You will have to upgrade your operating system, if that is possible. What you can do to upgrade will depend upon your computer and software you run. To get more information about your computer, go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number.
Maybe you are looking for
-
Can I install a second (larger) internal hard drive?
Out of storage, thought I needed an external hard drive but someone was pointing me towards an internal drive which would be cheaper. Does my older G5 PPC (pre-Intel duel processor, running OS10.4.11) have the ability to take in another hard drive i
-
Need help on breaking a large string into substringsto fit in a line
hii,suppose i have i have large string (the content of which is not apparently visible to me)which i want to show in a text area ,,,now how can i break it into multiple lines to be able view the total string... i dont want to use horizantal scrollbar
-
I have an Ipod Touch (4th Generation) and FaceTime isn't in my settings or shows up as an app. I don't have Restricitions. I want FaceTime back so how do I get it? I searched my whole Ipod for FaceTime and there weren't any results. I used Voice Cont
-
JTable JComboBox display Problems
I have a JTable which uses JCombobox's to display one column's infomation. Most times this works perfectly well and displayes correctly. But sometimes the combo box will not be displayed at all in the table (just get a white cell). When clicked apon
-
Connecting Ipod to mono system
Has anyone tried connecting their Ipod to an mono amplifier? Specifically, I'm looking to make a connection from a 1/8" stereo male to a mono 1/4" male. The right & left speaker leads would be connected (shorted) at the 1/4" jack. I've read the user