Trigger on a paritioned table to insert into a non-paritioned table

Hi,
I have a partitioned table which will have a high degree of concurrent DMLs (Updates). It has a initrans value set to 16. On this table a trigger is created which will insert into a non-partitioned table on update of highly updateable columns. I am planning to keep the initrans value and freelists value to 16 so that it does not serialize and wait for the block slots.
Is the above set up performance inefficient? Is partitioning the table in which the trigger inserts will improve the performance?
Thanks,
Rajesh

I think if you want to consider an efficient solution, I would look at not implementing your requirements using triggers. If possible consider an API approach where whatever "applicaiton" is being used calls a PL/SQL package that will update both tables if necessary. There are a number of disadvantages to using triggers.
HTH!
Edited by: Centinul on Jan 2, 2009 11:48 PM
Check out this recent thread on triggers: Should one really avoid triggers???

Similar Messages

Inserts into Global Temporary Table

I'm working on using a global temporary table in one of my apps. I have a small test run here to isolate the problem. It simply creates the global temporary table, inserts a row, commits and then does a select to see if the insert worked. No data shows in the table when running this. I don't know much about global temp tables, so any help would be appreciated.
CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT DELETE ROWS;
INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(0, '', SYSDATE, SYSDATE);
commit;
SELECT * FROM AGENT_SILO.AS_TEMP_VALIDATE;

So I wonder what else I'm doing wrong that's really obvious. Here's what i'm trying to accomplish and maybe there's a better way of going about it.
I have a trigger that is supposed to do some validation before the insert is allowed to go through. So here's my approach. I have a trigger fired when there's an insert into the AS_Employee_history table. This passes some of the fields from this insert into a proc (the id, a flag and a couple of dates). Within the proc, i create a global temp table, insert these passed values into the temp table. Then I have a cursor to basically copy the rows from the as_employee_history table that have the same id. Then I can do some selects on the temp table to see if it passes the validation.
I have outputs throughout for debugging and it gets to right after the inserts into the temp table, then the rest of the code doesn't appear to be executed. So it looks like it's failing at the execution of select statements on the temp table. Anything else obvious that I"m missing here?
Here's my proc.
PROCEDURE "PAS_VALIDATE" (STATUS OUT VARCHAR2, v_status OUT BOOLEAN, NEW_SBI_EMPLOYEE_ID IN NUMBER,
NEW_CURRENT_FLAG IN CHAR, NEW_EFFECTIVE_START IN DATE,
NEW_EFFECTIVE_END IN DATE)
IS
v_prev_effective_end date;
v_flag_count number;
v_flag_count_date number;
--variables to store dynamic sql returns
v_sql_flag_count_date varchar2(255);
v_sql_flag_count varchar2(255);
v_sql_prev_eff_end varchar2(255);
cursor c_row is
select * from AGENT_SILO.AS_EMPLOYEE_HISTORY EMP
where (EMP.SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID);
r_row c_row%ROWTYPE;
BEGIN
Status := 'Started';
v_status := true;
DBMS_OUTPUT.PUT_LINE('Creating temporary table...');
execute immediate 'CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT PRESERVE ROWS';
     DBMS_OUTPUT.PUT_LINE('Validating the data...');
     --DBMS_OUTPUT.PUT_LINE('Inserting submitted row into temp table');
--Insert the new row being submitted from user into the temp table
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || NEW_SBI_EMPLOYEE_ID || ',
''' || NEW_CURRENT_FLAG || ''',
to_date(''' || to_char(NEW_EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(NEW_EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
--Insert the other rows to we end up with a subset of the employee history table
--with only rows that match the sbi_employee_id of the submitted row
     --DBMS_OUTPUT.PUT_LINE('Inserting into temp table...');
open c_row;
loop
fetch c_row into r_row;
exit when c_row%NOTFOUND;
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || r_row.SBI_EMPLOYEE_ID || ',
''' || r_row.CURRENT_FLAG || ''',
to_date(''' || to_char(r_row.EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(r_row.EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
end loop;
close c_row;
DBMS_OUTPUT.PUT_LINE('After inserts');
-----Store queries to determine values for validation--------------------------
v_sql_prev_eff_end := 'SELECT to_char(max(effective_end), ''dd-mon-yy'')
FROM AGENT_SILO.AS_TEMP_VALIDATE
where to_char(EFFECTIVE_END, ''dd-mon-yy'') != ''31-dec-99'' AND
SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID';
--Find the largest effective_end, besides the 9999 value
execute immediate v_sql_prev_eff_end into v_prev_effective_end;
DBMS_OUTPUT.PUT_LINE('The highest previous end date: ' || v_prev_effective_end);
--...........Validation testing...........
execute immediate 'DROP TABLE AGENT_SILO.AS_TEMP_VALIDATE'; --Drop temp table
DBMS_OUTPUT.PUT_LINE('Validation Procedure Complete');
COMMIT;
status:='Success';
EXCEPTION
When Others Then
ROLLBACK;
Status := SQLERRM;
END;
Thanks a bunch for helping a noob out.

Inserting into a table which is created "on the fly" from a trigger

Hello all,
I am trying to insert into a table from a trigger in Oracle form. The table name however, is inputted by the user in am item form.
here is what the insert looks like:
insert into :table_name
values (:value1, :value2);
the problem is that forms does not recognize ::table_name. If I replace :table_name with an actual database table, it works fine. However, I need to insert to a table_name based from oracle form item.
By the way, the table|_name is built on the fly using a procedure before I try to insert into it.
Any suggestion on how can I do that? My code in the trigger is:
declare
dm_drop_tbl(:table_name,'table) // a call to an external procedure to drop the table
dm_create_tbl(:table_name,'att1','att2');
insert into :table_name
values (:value1, :value2);
this give me an error:
encounter "" when the symbol expecting one.....

Hi ,
You should use the FORMS_DDL built_in procedure. Read the on-line documentation of forms ...
Simon

Need to increase performance-bulk collect in cursor with limit and in the for loop inserting into the trigger table

Hi all,
I have a performance issue in the below code,where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
can someone please guide me here.Its bit urgent .Awaiting for your response.
declare
vmax_Value NUMBER(5);
vcnt number(10);
id_val number(20);
pc_id number(15);
vtable_nm VARCHAR2(100);
vstep_no VARCHAR2(10);
vsql_code VARCHAR2(10);
vsql_errm varchar2(200);
vtarget_starttime timestamp;
limit_in number :=10000;
idx           number(10);
          cursor stg_cursor is
         select
               DESCRIPTION,
               SORT_CODE,
               ACCOUNT_NUMBER,
                 to_number(to_char(CORRESPONDENCE_DATE,'DD')) crr_day,
                 to_char(CORRESPONDENCE_DATE,'MONTH') crr_month,
                 to_number(substr(to_char(CORRESPONDENCE_DATE,'DD-MON-YYYY'),8,4)) crr_year,
               PARTY_ID,
               GUID,
               PAPERLESS_REF_IND,
               PRODUCT_TYPE,
               PRODUCT_BRAND,
               PRODUCT_HELD_ID,
               NOTIFICATION_PREF,
               UNREAD_CORRES_PERIOD,
               EMAIL_ID,
               MOBILE_NUMBER,
               TITLE,
               SURNAME,
               POSTCODE,
               EVENT_TYPE,
               PRIORITY_IND,
               SUBJECT,
               EXT_PRD_ID_TX,
               EXT_PRD_HLD_ID_TX,
               EXT_SYS_ID,
               EXT_PTY_ID_TX,
               ACCOUNT_TYPE_CD,
               COM_PFR_TYP_TX,
               COM_PFR_OPT_TX,
               COM_PFR_RSN_CD
         from table_stg;
type rec_type is table of stg_rec_type index by pls_integer;
v_rt_all_cols rec_type;
BEGIN
vstep_no   := '0';
vmax_value := 0;
vtarget_starttime := systimestamp;
id_val    := 0;
pc_id     := 0;
success_flag := 0;
          vstep_no := '1';
          vtable_nm := 'before cursor';
    OPEN stg_cursor;
          vstep_no := '2';
          vtable_nm := 'After cursor';
   LOOP
          vstep_no := '3';
          vtable_nm := 'before fetch';
--loop
    FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
              vstep_no := '4';
              vtable_nm := 'after fetch';
--EXIT WHEN v_rt_all_cols.COUNT = 0;
    EXIT WHEN stg_cursor%NOTFOUND;
FOR i IN 1 .. v_rt_all_cols.COUNT
LOOP
   dbms_output.put_line(upper(v_rt_all_cols(i).event_type));
    if (upper(v_rt_all_cols(i).event_type) = upper('System_enforced')) then
              vstep_no := '4.1';
              vtable_nm := 'before seq sel';
          select PC_SEQ.nextval into pc_id from dual;
              vstep_no := '4.2';
              vtable_nm := 'before insert corres';
          INSERT INTO target1_tab
                       (ID,
                        PARTY_ID,
                        PRODUCT_BRAND,
                        SORT_CODE,
                        ACCOUNT_NUMBER,
                        EXT_PRD_ID_TX,
                        EXT_PRD_HLD_ID_TX,
                        EXT_SYS_ID,
                        EXT_PTY_ID_TX,
                        ACCOUNT_TYPE_CD,
                        COM_PFR_TYP_TX,
                        COM_PFR_OPT_TX,
                        COM_PFR_RSN_CD,
                        status)
         VALUES
                        (pc_id,
                         v_rt_all_cols(i).party_id,
                         decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
                         v_rt_all_cols(i).sort_code,
                         'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4),
                         v_rt_all_cols(i).EXT_PRD_ID_TX,
                         v_rt_all_cols(i).EXT_PRD_HLD_ID_TX,
                         v_rt_all_cols(i).EXT_SYS_ID,
                         v_rt_all_cols(i).EXT_PTY_ID_TX,
                         v_rt_all_cols(i).ACCOUNT_TYPE_CD,
                         v_rt_all_cols(i).COM_PFR_TYP_TX,
                         v_rt_all_cols(i).COM_PFR_OPT_TX,
                         v_rt_all_cols(i).COM_PFR_RSN_CD,
                         NULL);
              vstep_no := '4.3';
              vtable_nm := 'after insert corres';
    else
          select COM_SEQ.nextval into id_val from dual;
              vstep_no := '6';
              vtable_nm := 'before insertcomm';
      if (upper(v_rt_all_cols(i).event_type) = upper('REMINDER')) then
            vstep_no := '6.01';
              vtable_nm := 'after if insertcomm';
          insert into parent_tab
             (ID ,
             CTEM_CODE,
             CHA_CODE,
             CT_CODE,
             CONTACT_POINT_ID,
             SOURCE,
             RECEIVED_DATE,
             SEND_DATE,
             RETRY_COUNT)
          values
             (id_val,
              lower(v_rt_all_cols(i).event_type),
              decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
              'Email',
              v_rt_all_cols(i).email_id,
              'IADAREMINDER',
              systimestamp,
              systimestamp,
              0);
     else
            vstep_no := '6.02';
              vtable_nm := 'after else insertcomm';
          insert into parent_tab
             (ID ,
             CTEM_CODE,
             CHA_CODE,
             CT_CODE,
             CONTACT_POINT_ID,
             SOURCE,
             RECEIVED_DATE,
             SEND_DATE,
             RETRY_COUNT)
          values
             (id_val,
              lower(v_rt_all_cols(i).event_type),
              decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
              'Email',
              v_rt_all_cols(i).email_id,
              'CORRESPONDENCE',
              systimestamp,
              systimestamp,
              0);
        END if;
              vstep_no := '6.11';
              vtable_nm := 'before chop';
         if (v_rt_all_cols(i).ACCOUNT_NUMBER is not null) then
                  v_rt_all_cols(i).ACCOUNT_NUMBER := 'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4);
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             'IB.Correspondence.AccountNumberMasked',
             v_rt_all_cols(i).ACCOUNT_NUMBER);
         end if;
              vstep_no := '6.1';
              vtable_nm := 'before stateday';
         if (v_rt_all_cols(i).crr_day is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Day',
             'IB.Crsp.Date.Day',
             v_rt_all_cols(i).crr_day);
         end if;
              vstep_no := '6.2';
              vtable_nm := 'before statemth';
         if (v_rt_all_cols(i).crr_month is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Month',
             'IB.Crsp.Date.Month',
             v_rt_all_cols(i).crr_month);
         end if;
              vstep_no := '6.3';
              vtable_nm := 'before stateyear';
         if (v_rt_all_cols(i).crr_year is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Year',
             'IB.Crsp.Date.Year',
             v_rt_all_cols(i).crr_year);
         end if;
              vstep_no := '7';
              vtable_nm := 'before type';
           if (v_rt_all_cols(i).product_type is not null) then
              insert into child_tab
                 (COM_ID,
                 KEY,
                 VALUE)
              values
                (id_val,
                 'IB.Product.ProductName',
               v_rt_all_cols(i).product_type);
            end if;
              vstep_no := '9';
              vtable_nm := 'before title';
          if (trim(v_rt_all_cols(i).title) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE )
          values
            (id_val,
             'IB.Customer.Title',
             trim(v_rt_all_cols(i).title));
          end if;
              vstep_no := '10';
              vtable_nm := 'before surname';
          if (v_rt_all_cols(i).surname is not null) then
            insert into child_tab
               (COM_ID,
               KEY,
               VALUE)
            values
              (id_val,
              'IB.Customer.LastName',
              v_rt_all_cols(i).surname);
          end if;
                        vstep_no := '12';
                        vtable_nm := 'before postcd';
          if (trim(v_rt_all_cols(i).POSTCODE) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Customer.Addr.PostCodeMasked',
              substr(replace(v_rt_all_cols(i).POSTCODE,' ',''),length(replace(v_rt_all_cols(i).POSTCODE,' ',''))-2,3));
          end if;
                        vstep_no := '13';
                        vtable_nm := 'before subject';
          if (trim(v_rt_all_cols(i).SUBJECT) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Correspondence.Subject',
              v_rt_all_cols(i).subject);
          end if;
                        vstep_no := '14';
                        vtable_nm := 'before inactivity';
          if (trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) is null or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '3' or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '6' or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '9') then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Correspondence.Inactivity',
              v_rt_all_cols(i).UNREAD_CORRES_PERIOD);
          end if;
                      vstep_no := '14.1';
                      vtable_nm := 'after notfound';
    end if;
                      vstep_no := '15';
                      vtable_nm := 'after notfound';
    END LOOP;
    end loop;
                      vstep_no := '16';
                      vtable_nm := 'before closecur';
    CLOSE stg_cursor;
                      vstep_no := '17';
                      vtable_nm := 'before commit';
    DELETE FROM table_stg;
COMMIT;
                      vstep_no := '18';
                      vtable_nm := 'after commit';
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
success_flag := 1;
vsql_code := SQLCODE;
vsql_errm := SUBSTR(sqlerrm,1,200);
error_logging_pkg.inserterrorlog('samp',vsql_code,vsql_errm, vtable_nm,vstep_no);
RAISE_APPLICATION_ERROR (-20011, 'samp '||vstep_no||' SQLERRM:'||SQLERRM);
end;
Thanks

Its bit urgent
NO - it is NOT urgent. Not to us.
If you have an urgent problem you need to hire a consultant.
I have a performance issue in the below code,
Maybe you do and maybe you don't. How are we to really know? You haven't posted ANYTHING indicating that a performance issue exists. Please read the FAQ for how to post a tuning request and the info you need to provide. First and foremost you have to post SOMETHING that actually shows that a performance issue exists. Troubleshooting requires FACTS not just a subjective opinion.
where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
Personally I think 5000 seconds (about 1 hr 20 minutes) is very fast for processing 800 trillion rows of data into parent and child tables. Why do you think that is slow?
Your code has several major flaws that need to be corrected before you can even determine what, if anything, needs to be tuned.
This code has the EXIT statement at the beginning of the loop instead of at the end
    FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
              vstep_no := '4';
              vtable_nm := 'after fetch';
--EXIT WHEN v_rt_all_cols.COUNT = 0;
    EXIT WHEN stg_cursor%NOTFOUND;
The correct place for the %NOTFOUND test when using BULK COLLECT is at the END of the loop; that is, the last statement in the loop.
You can use a COUNT test at the start of the loop but ironically you have commented it out and have now done it wrong. Either move the NOTFOUND test to the end of the loop or remove it and uncomment the COUNT test.
WHEN OTHERS THEN
ROLLBACK;
That basically says you don't even care what problem occurs or whether the problem is for a single record of your 10,000 in the collection. You pretty much just throw away any stack trace and substitute your own message.
Your code also has NO exception handling for any of the individual steps or blocks of code.
The code you posted also begs the question of why you are using NAME=VALUE pairs for child data rows? Why aren't you using a standard relational table for this data?
As others have noted you are using slow-by-slow (row by row processing). Let's assume that PL/SQL, the bulk collect and row-by-row is actually necessary.
Then you should be constructing the parent and child records into collections and then inserting them in BULK using FORALL.
1. Create a collection for the new parent rows
2. Create a collection for the new child rows
3. For each set of LIMIT source row data
a. empty the parent and child collections
b. populate those collections with new parent/child data
c. bulk insert the parent collection into the parent table
d. bulk insert the child collection into the child table
And unless you really want to either load EVERYTHING or abandon everything you should use bulk exception handling so that the clean data gets processed and only the dirty data gets rejected.

Trigger on Insert into a custom table from external application

This is the problem I am facing.
External Application using a different schema lets say extdb on a different server. This writes into a table in a schema called appscustom schema. Appscustom schema is under Oracle Apps.
A trigger in Oracle Apps to be executed on insert into the appscustom schema table.
This trigger inturn will run a concurrent job to create the invoice and gl interface tables.
THe problem I am facing is, The trigger get executed but the concurrent job does not get triggered/run.
Here is the trigger. Let me know, what might be wrong.
THe values for vRESP_APPL_Id,vRESP_ID, vUSER_ID becomes null in the test_pims table.
Whereas when I manually insert from backend into appscustom schema table the concurrent job gets submitted.
~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Start of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT
-- Generated 5/25/2005 22:10:52 from APPS@HENRY_DEVL
CREATE OR REPLACE TRIGGER rwjf_pims_oracle_int
AFTER
INSERT
ON rwjf_pimstxnbatch
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
WHEN (new.status = 'U' )
Declare
ReturnCode BOOLEAN;
ConcReqID NUMBER := 0;
vRESP_APPL_ID NUMBER;
vRESP_ID NUMBER;
vUSER_ID NUMBER;
LoadToAp NUMBER :=0;
LoadToGl NUMBER :=0;
Begin
-- vRESP_APPL_ID := apps.fnd_profile.value(200); -- AP --('RESP_APPL_ID');
-- vRESP_ID := apps.fnd_profile.value(20639); -- 20639 for payables mgr. for rwjf_payables Mgr (50001); --('RESP_ID');
-- vUSER_ID := apps.fnd_profile.value(1247); -- 1247 for sury 1065 for interface -- ('USER_ID');
LoadToAp := 0;
SELECT COUNT(*)
INTO LoadToAp
FROM rwjf.RWJF_PimsTxnBatchDtl
WHERE GL_OR_AP = 'A'
AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
LoadToGl := 0;
SELECT COUNT(*)
INTO LoadToGl
FROM rwjf.RWJF_PimsTxnBatchDtl
WHERE GL_OR_AP = 'G'
AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
IF LoadToAp > 0 THEN
vRESP_APPL_ID := 200; -- Application Id 200 Account payables
vRESP_ID := 50001; -- RWJF_Payables Mgr for user interface
vUSER_ID := 1065; -- user id for user name interface
apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
ConcReqID := 0;
ReturnCode := FND_REQUEST.SET_MODE(TRUE);
ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
'RWJF_PIMS_INT',
'', '', FALSE,
:NEW.Pims_Txn_Batch_id,'AP', chr(0),
END IF;
IF LoadToGl > 0 THEN
vRESP_APPL_ID := 20003;
vRESP_ID := 50003;
vUSER_ID := 1065;
apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
ConcReqID := 0;
ReturnCode := FND_REQUEST.SET_MODE(TRUE);
ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
'RWJF_PIMS_INT',
'', '', FALSE,
:NEW.Pims_Txn_Batch_id,'GL',chr(0),
END IF;
insert into test_pims
values
('Test3',:New.Pims_Txn_Batch_id,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
insert into test_pims
values
('Test3',ConcReqID,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
IF ConcReqID = 0 THEN
DBMS_OUTPUT.PUT_LINE('Problem Submitting Program to get pims txn batch'); /* Handle Error */
END IF;
End;
-- End of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT

don't quite understand the structure of your tables but it sounds similiar to a merge statement.
(contiditonally insert, update records depending on whether or not corresponding records exist)
create table custom_table
(cust_no number,
line_no number,
party_id number
create table hz_parties
as (
select 1 party_id, 'A' bill_to_location, 10 cust_no, 100 line_no from dual union
select 2, 'B', 20, 200 from dual union
select 3, 'C', 30, 300 from dual union
select 4, 'D', 40, 400 from dual
merge into custom_table t1
using (select * from hz_parties) t2
on (t1.party_id = t2.party_id)
when not matched then insert (t1.cust_no, t1.line_no, t1.party_id)
values (t2.cust_no, t2.line_no, t2.party_id);
Edited by: pollywog on Mar 5, 2010 6:52 AM

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

Insert into two tables with trigger on PK in second table

Hi evereone, ineed help.
I have two tables (organizations, addresses).
On addresses table i have trigger on PK. When i do insert i must get this param and insert into OrganizationTable for reference.
Without ADF i can do insert with returning on addresses, than do insert on organizations with this returning param. How can i do this in ADF business logic using trainTaskFlow?
Thanks all.
Edited by: WaterStream on 15.10.2012 15:10

thanks for reply, but i found solution in this materials:
http://liuwuhua.blogspot.com/2010/11/master-detail-crud-in-adf-bc.html
(on this link anyone can download model and see all params)
but in my project i will get JBO-25030 error.
Solution founded here:
http://vtkrishn.com/2011/02/09/oracle-jbo-invalidownerexception/
Work great!!!

Insert into a table using DB trigger

Hi,
I want to create a trigger on mytableA during INSERT or UPDATE:
When a record is created or updated in mytableA, I would like to insert a record into mytableB.
Before inserting, I would like to check if the corresponding mytable data already exists in the mytableB.
I was wondering if there's any better PLSQL code rather than using something like this.
select count(1) from mytableB where...
if count(1) <0 then
insert into mytableB
end if;
OR
use a no data found logic
Note: I will not be doing an UPDATE to mytableB if the record already exists.
Thanks in Advance.
Anto

Hi,
I am using 10g.
Could you give me an example on how to form a MERGE for DB trigger.
I tried something like this:
MERGE INTO mytableB
USING (SELECT col1,col2,col3 FROM mytableA) A
ON (A.col1=:new.col1)
WHEN NOT MATCHED THEN INSERT (col1,col2,col3e)
VALUES (:NEW.col1,:NEW.col2,:NEW.col3);
But since I am write a trigger on mytableA , SELECT might cause trigger mutating.
Please suggest.
Thanks.
Anto

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

How to read LONG RAW data from one table and insert into another table

Hello EVERYBODY
I have a table called sound with the following attributes. in the music attribute i have stored some messages in the different language like hindi, english etc. i want to concatinate all hindi messages and store in the another table with only one attribute of type LONG RAW.and this attribute is attached with the sound item.
when i click the play button of sound item the all the messages recorded in hindi will play one by one automatically. for that i'm doing the following.
i have written the following when button pressed trigger which will concatinate all the messages of any selected language from the sound table, and store in another table called temp.
and then sound will be played from the temp table.
declare
     tmp sound.music%type;
     temp1 sound.music%type;
     item_id ITEM;
cursor c1
is select music
from sound
where lang=:LIST10;
begin
     open c1;
     loop
          fetch c1 into tmp; //THIS LINE GENERATES THE ERROR
          temp1:=temp1||tmp;
          exit when c1%notfound;
     end loop;
CLOSE C1;
insert into temp values(temp1);
item_id:=Find_Item('Music');
go_item('music');
play_sound(item_id);
end;
but when i'm clicking the button it generates the following error.
WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-06502.
ORA-06502: PL/SQL: numeric or value error
SQL> desc sound;
Name Null? Type
SL_NO NUMBER(2)
MUSIC LONG RAW
LANG CHAR(10)
IF MY PROCESS TO SOLVE THE ABOVE PROBLEM IS OK THEN PLESE TELL ME THE SOLUTION FOR THE ERROR. OTHER WISE PLEASE SUGGEST ME,IF ANY OTHER WAY IS THERE TO SOLVE THE ABOVE PROBLEM.
THANKS IN ADVANCE.
D. Prasad

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

BULK INSERT into View w/ Instead Of Trigger - DML ERROR LOGGING Issue

Oracle 10.2.0.4
I cannot figure out why I cannot get bulk insert errors to aggregate and allow the insert to continue when bulk inserting into a view with an Instead of Trigger. Whether I use LOG ERRORS clause or I use SQL%BULK_EXCEPTIONS, the insert works until it hits the first exception and then exits.
Here's what I'm doing:
1. I'm bulk inserting into a view with an Instead of Trigger on it that performs the actual updating on the underlying table. This table is a child table with a foreign key constraint to a reference table containing the primary key. In the Instead of Trigger, it attempts to insert a record into the child table and I get the following exception: +5:37:55 ORA-02291: integrity constraint (FK_TEST_TABLE) violated - parent key not found+, which is expected, but the error should be logged in the table and the rest of the inserts should complete. Instead the bulk insert exits.
2. If I change this to bulk insert into the underlying table directly, it works, all errors get put into the error logging table and the insert completes all non-exception records.
Here's the "test" procedure I created to test my scenario:
View: V_TEST_TABLE
Underlying Table: TEST_TABLE
PROCEDURE BulkTest
IS
TYPE remDataType IS TABLE of v_TEST_TABLE%ROWTYPE INDEX BY BINARY_INTEGER;
varRemData remDataType;
begin
select /*+ DRIVING_SITE(r)*/ *
BULK COLLECT INTO varRemData
from TEST_TABLE@REMOTE_LINK
where effectiveday < to_date('06/16/2012 04','mm/dd/yyyy hh24')
and terminationday > to_date('06/14/2012 04','mm/dd/yyyy hh24');
BEGIN
FORALL idx IN varRemData.FIRST .. varRemData.LAST
INSERT INTO v_TEST_TABLE VALUES varRemData(idx) LOG ERRORS INTO dbcompare.ERR$_TEST_TABLE ('INSERT') REJECT LIMIT UNLIMITED;
EXCEPTION WHEN others THEN
DBMS_OUTPUT.put_line('ErrorCode: '||SQLCODE);
END;
COMMIT;
end;
I've reviewed Oracle's documentation on both DML logging tools and neither has any restrictions (at least that I can see) that would prevent this from working correctly.
Any help would be appreciated....
Thanks,
Steve

Thanks, obviously this is my first post, I'm desperate to figure out why this won't work....
This code I sent is only a test proc to try and troubleshoot the issue, the others with the debug statement is only to capture the insert failing and not aggregating the errors, that won't be in the real proc.....
Thanks,
Steve

ORA-07445 in the alert log when inserting into table with XMLType column

I'm trying to insert an xml-document into a table with a schema-based XMLType column. When I try to insert a row (using plsql-developer) - oracle is busy for a few seconds and then the connection to oracle is lost.
Below you''ll find the following to recreate the problem:
a) contents from the alert log
b) create script for the table
c) the before-insert trigger
d) the xml-schema
e) code for registering the schema
f) the test program
g) platform information
Alert Log:
Fri Aug 17 00:44:11 2007
Errors in file /oracle/app/oracle/product/10.2.0/db_1/admin/dntspilot2/udump/dntspilot2_ora_13807.trc:
ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to object] [475177] [] [] []
Create script for the table:
CREATE TABLE "DNTSB"."SIGNATURETABLE"
(     "XML_DOCUMENT" "SYS"."XMLTYPE" ,
"TS" TIMESTAMP (6) WITH TIME ZONE NOT NULL ENABLE
) XMLTYPE COLUMN "XML_DOCUMENT" XMLSCHEMA "http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd" ELEMENT "Object"
ROWDEPENDENCIES ;
Before-insert trigger:
create or replace trigger BIS_SIGNATURETABLE
before insert on signaturetable
for each row
declare
-- local variables here
l_sigtab_rec signaturetable%rowtype;
begin
if (:new.xml_document is not null) then
:new.xml_document.schemavalidate();
end if;
l_sigtab_rec.xml_document := :new.xml_document;
end BIS_SIGNATURETABLE2;
XML-Schema (xmldsig-core-schema.xsd):
=====================================================================================
<?xml version="1.0" encoding="utf-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:xdb="http://xmlns.oracle.com/xdb"
targetNamespace="http://www.w3.org/2000/09/xmldsig#" version="0.1" elementFormDefault="qualified">

<xs:simpleType name="CryptoBinary">
<xs:restriction base="xs:base64Binary">
</xs:restriction>
</xs:simpleType>

<xs:element name="Signature" type="ds:SignatureType"/>
<xs:complexType name="SignatureType">
<xs:sequence>
<xs:element ref="ds:SignedInfo"/>
<xs:element ref="ds:SignatureValue"/>
<xs:element ref="ds:KeyInfo" minOccurs="0"/>
<xs:element ref="ds:Object" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureValue" type="ds:SignatureValueType"/>
<xs:complexType name="SignatureValueType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>

<xs:element name="SignedInfo" type="ds:SignedInfoType"/>
<xs:complexType name="SignedInfoType">
<xs:sequence>
<xs:element ref="ds:CanonicalizationMethod"/>
<xs:element ref="ds:SignatureMethod"/>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="CanonicalizationMethod" type="ds:CanonicalizationMethodType"/>
<xs:complexType name="CanonicalizationMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##any" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="SignatureMethod" type="ds:SignatureMethodType"/>
<xs:complexType name="SignatureMethodType" mixed="true">
<xs:sequence>
<xs:element name="HMACOutputLength" minOccurs="0" type="ds:HMACOutputLengthType"/>
<xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>

<xs:element name="Reference" type="ds:ReferenceType"/>
<xs:complexType name="ReferenceType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
<xs:element ref="ds:DigestMethod"/>
<xs:element ref="ds:DigestValue"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="URI" type="xs:anyURI" use="optional"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Transforms" type="ds:TransformsType"/>
<xs:complexType name="TransformsType">
<xs:sequence>
<xs:element ref="ds:Transform" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Transform" type="ds:TransformType"/>
<xs:complexType name="TransformType" mixed="true">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>

<xs:element name="XPath" type="xs:string"/>
</xs:choice>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>

<xs:element name="DigestMethod" type="ds:DigestMethodType"/>
<xs:complexType name="DigestMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="DigestValue" type="ds:DigestValueType"/>
<xs:simpleType name="DigestValueType">
<xs:restriction base="xs:base64Binary"/>
</xs:simpleType>


<xs:element name="KeyInfo" type="ds:KeyInfoType"/>
<xs:complexType name="KeyInfoType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:element ref="ds:KeyName"/>
<xs:element ref="ds:KeyValue"/>
<xs:element ref="ds:RetrievalMethod"/>
<xs:element ref="ds:X509Data"/>
<xs:element ref="ds:PGPData"/>
<xs:element ref="ds:SPKIData"/>
<xs:element ref="ds:MgmtData"/>
<xs:any processContents="lax" namespace="##other"/>

</xs:choice>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="KeyName" type="xs:string"/>
<xs:element name="MgmtData" type="xs:string"/>
<xs:element name="KeyValue" type="ds:KeyValueType"/>
<xs:complexType name="KeyValueType" mixed="true">
<xs:choice>
<xs:element ref="ds:DSAKeyValue"/>
<xs:element ref="ds:RSAKeyValue"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:complexType>
<xs:element name="RetrievalMethod" type="ds:RetrievalMethodType"/>
<xs:complexType name="RetrievalMethodType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="URI" type="xs:anyURI"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>

<xs:element name="X509Data" type="ds:X509DataType"/>
<xs:complexType name="X509DataType">
<xs:sequence maxOccurs="unbounded">
<xs:choice>
<xs:element name="X509IssuerSerial" type="ds:X509IssuerSerialType"/>
<xs:element name="X509SKI" type="xs:base64Binary"/>
<xs:element name="X509SubjectName" type="xs:string"/>
<xs:element name="X509Certificate" type="xs:base64Binary"/>
<xs:element name="X509CRL" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
<xs:complexType name="X509IssuerSerialType">
<xs:sequence>
<xs:element name="X509IssuerName" type="xs:string"/>
<xs:element name="X509SerialNumber" type="xs:integer"/>
</xs:sequence>
</xs:complexType>


<xs:element name="PGPData" type="ds:PGPDataType"/>
<xs:complexType name="PGPDataType">
<xs:choice>
<xs:sequence>
<xs:element name="PGPKeyID" type="xs:base64Binary"/>
<xs:element name="PGPKeyPacket" type="xs:base64Binary" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:sequence>
<xs:element name="PGPKeyPacket" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
</xs:choice>
</xs:complexType>


<xs:element name="SPKIData" type="ds:SPKIDataType"/>
<xs:complexType name="SPKIDataType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="SPKISexp" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"/>
</xs:sequence>
</xs:complexType>



<xs:element name="Object" type="ds:ObjectType"/>
<xs:complexType name="ObjectType" mixed="true">
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##any" processContents="lax"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="MimeType" type="xs:string" use="optional"/> 
<xs:attribute name="Encoding" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Manifest" type="ds:ManifestType"/>
<xs:complexType name="ManifestType">
<xs:sequence>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperties" type="ds:SignaturePropertiesType"/>
<xs:complexType name="SignaturePropertiesType">
<xs:sequence>
<xs:element ref="ds:SignatureProperty" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperty" type="ds:SignaturePropertyType"/>
<xs:complexType name="SignaturePropertyType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>

</xs:choice>
<xs:attribute name="Target" type="xs:anyURI" use="required"/>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>


<xs:simpleType name="HMACOutputLengthType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>

<xs:element name="DSAKeyValue" type="ds:DSAKeyValueType"/>
<xs:complexType name="DSAKeyValueType">
<xs:sequence>
<xs:sequence minOccurs="0">
<xs:element name="P" type="ds:CryptoBinary"/>
<xs:element name="Q" type="ds:CryptoBinary"/>
</xs:sequence>
<xs:element name="G" type="ds:CryptoBinary" minOccurs="0"/>
<xs:element name="Y" type="ds:CryptoBinary"/>
<xs:element name="J" type="ds:CryptoBinary" minOccurs="0"/>
<xs:sequence minOccurs="0">
<xs:element name="Seed" type="ds:CryptoBinary"/>
<xs:element name="PgenCounter" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:sequence>
</xs:complexType>
<xs:element name="RSAKeyValue" type="ds:RSAKeyValueType"/>
<xs:complexType name="RSAKeyValueType">
<xs:sequence>
<xs:element name="Modulus" type="ds:CryptoBinary"/>
<xs:element name="Exponent" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:complexType>


</xs:schema>
===============================================================================
Code for registering the xml-schema
begin
dbms_xmlschema.deleteSchema('http://xmlns.oracle.com/xdb/schemas/DNTSB/www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
dbms_xmlschema.DELETE_CASCADE_FORCE);
end;
begin
DBMS_XMLSCHEMA.REGISTERURI(
schemaurl => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
schemadocuri => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
local => TRUE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => 'DNTSB',
options => 0);
end;
Test program
-- Created on 17-07-2006 by EEJ
declare
XML_TEXT3 CLOB := '<Object xmlns="http://www.w3.org/2000/09/xmldsig#">
                              <SignatureProperties>
                                   <SignatureProperty Target="">
                                        <Timestamp xmlns="http://www.sporfori.fo/schemas/dnts/general/2006/11/14">2007-05-10T12:00:00-05:00</Timestamp>
                                   </SignatureProperty>
                              </SignatureProperties>
                         </Object>';
xmldoc xmltype;
begin
xmldoc := xmltype(xml_text3);
insert into signaturetable
(xml_document, ts)
values
(xmldoc, current_timestamp);
end;
Platform information
Operating system:
-bash-3.00$ uname -a
SunOS dntsdb 5.10 Generic_125101-09 i86pc i386 i86pc
SQLPlus:
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Aug 17 00:15:13 2007
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning and Data Mining options
Kind Regards,
Eyðun

You should report this in a service request on http://metalink.oracle.com.
It is a shame that you put all the effort here to describe your problem, but on the other hand you can now also copy & paste the question to Oracle Support.
Because you are using 10.2.0.3; I am guessing that you have a valid service contract...

R12 - Approach to Insert into custom table after payment is done

Hi,
I have a requirement to insert into a custom table after invoice payment in R12. Code units are already in place to load data from ap tables to custom one.
I have identified 2 ways in which this can be done:
1. Call from the business event oracle.apps.ap.payment
2. Call after the program 'Send separate remittance advice' completes, again as a business event after the concurrent program completes i.e. to use 'Request Completed' business event.
My questions are as below:
1. Is there any other way in which I can write to a custom table after payment is done
2. How else can after report trigger be fired for SRA in R12 (without customizing the standard SRA java conc pgm)
3. When exactly business event 'oracle.apps.ap.payment' will be fired? Will it be fired for all payments irrespective of the way payment is done like thru PPR, payment workbench, etc?
Please share your thoughts on this.
Thanks,
Kavipriya

in our case, we have created a database trigger on IBY_PAY_INSTRUCTIONS_ALL, to insert the requisite data into custom tables whenever the payment status is "Ready for Printing"

Field != then Insert Into Other Table

Hi,
I cannot figure out how to create a trigger that will insert data based on if a old.field != new.field. If the field was changed in
one table tbl_test then insert that record into the other table tbl_test_history. This is a little different since I want to insert a record if a update
took place. The update will still take place in tbl_test but I want a insert to take place in tbl_test_history.
CREATE OR REPLACE TRIGGER AU_INSERT_TEST_HISTORY
AFTER UPDATE
ON TBL_TEST   FOR EACH ROW
WHEN (
    OLD.Orange != NEW.Orange
OR OLD.Apple != NEW.Apple
BEGIN
INSERT INTO TBL_TEST_HISTORY
(ORANGE,
APPLE
BANANA,
GRAPE
select ORANGE,
         APPLE
         BANANA,
         GRAPE
FROM TBL_TEST, TBL_TEST_HISTORY
WHERE TBL_TEST.PK_TEST_ID = TBL_TEST_HISTORY.PK_TEST_ID;
END AU_INSERT_TEST_HISTORY;
/I will have a separate trigger that will insert records from tbl_test to tbl_test_history. This trigger compiles with no errors but when I
create a record in tbl_test I receive an error. I am not sure if the syntax is correct, can anyone help me with this?

My bad. I put the colon : into the when clause. They weren't there in your code. Usually I use an if condition, which is a little different.
I added some NVL logic to to consider comparison of NULL values too.
CREATE OR REPLACE TRIGGER AU_INSERT_TEST_HISTORY
AFTER UPDATE ON TBL_TEST
FOR EACH ROW
BEGIN
if nvl(:old.ORANGE,'xxx') != nvl(:new.ORANGE,'yyy')
     OR nvl(:old.APPLE,'xxx') != nvl(:new.APPLE,'yyy')
then
    INSERT INTO TBL_TEST_HISTORY
     (ORANGE, APPLE, BANANA, GRAPE)
    values (:new.ORANGE,
             :new.APPLE,
             :new.BANANA,
             :new.GRAPE);
end if;
END AU_INSERT_TEST_HISTORY;
/ You can additionally consider to make this trigger an AFTER INSERT OR UPDATE trigger.
Then you would also put the inserted values from the start into your history table.
Edited by: Sven W. on Aug 9, 2012 4:14 PM

Created a trigger but new values are not inserting in the backup table

I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;

old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net

Trigger on a paritioned table to insert into a non-paritioned table

Similar Messages

Maybe you are looking for